- Industrial & lab equipment
- Electrical equipment & supplies
- Batteries & accessories
- Rechargeable batteries
- Victron energy
- 12,8V & 25,6V Lithium SuperPack
- Data Sheet
advertisement
12,8V & 25,6V Lithium SuperPack batteries
www.victronenergy.com
Integrated BMS and safety switch
The SuperPack batteries are extremely easy to install, needing no additional components.
The internal switch will disconnect the battery in case of over discharge, over charge or high temperature.
Abuse proof
A lead-acid battery will fail prematurely due to sulfation:
• If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
• If it is left partially charged or worse, fully discharged.
A Lithium-Ion battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of Li-ion compared to lead-acid.
The SuperPack batteries will cut-off the charge or discharge current when the maximum ratings are exceeded.
Efficient
In several applications (especially off-grid solar), energy efficiency can be of crucial importance.
The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%.
The round-trip energy efficiency of a Li-ion battery is 92%.
The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy are required (battery operating in 70% to 100% charged state).
In contrast, a Li-ion battery will still achieve 90% efficiency even under shallow discharge conditions.
Can be connected in parallel
The batteries can be connected in parallel. Series connection is not allowed.
Use in upright position only.
Lithium SuperPack
12,8/20 12,8/60 12,8/100 12,8/200 25,6/50
Chemistry
Nominal voltage
Nominal capacity @ 25 ° C
Nominal capacity @ 0 ° C
Nominal energy @ 25 ° C
Cycle life @ 80% DoD and 25 ° C
20Ah
16Ah
256Wh
LiFePO4
60Ah
48Ah
768Wh
12,8V
100Ah
80Ah
1280Wh
2500 cycles
200Ah
160Ah
2560Wh
25,6V
50Ah
40Ah
1280Wh
CHARGE and DISCHARGE
Max. cont. discharge current*
Peak discharge current (10 sec)
End of discharge voltage
Charge voltage, absorption**
Charge voltage, float
Max. cont. charge current
30A
80A
15A
30A
80A
50A
100A
10V
14,2V – 14,4V
13,5V
30A 50A
70A
100A
70A
50A
100A
20V
28,4V – 28,8V
27V
50A
OPERATING CONDITIONS
Parallel configuration
Series configuration
Operating temperature
Storage temperature
Max. storage time when fully charged
Humidity (non-condensing)
Protection class
Yes, unlimited
No
Discharge: -10°C to +50°C Charge: +5°C to +45°C
-40°C to +65°C
1 year ≤ 25°C 3 months ≤ 40°C
Max. 95%
IP 43
OTHER
Power connection (threaded inserts)
Dimensions (LxWxH) mm
Weight
M6
181 x 77
x 167
3,5kg
M6
229 x 138 x 213
9,5kg
M8
330 x 171 x
220
14kg
M8
520 x 269 x 208
31kg
M8
330 x 171 x 220
* The battery may disconnect when a load with a high input capacitance is connected, such as an inverter. The battery
will however retry and connect after approximately 10 seconds.
**The absorption period should preferably not exceed 4 hrs. A longer absorption period may slightly reduce service life.
14kg
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement