Epson BrightLink 696Ui Instructions
Add to My manuals6 Pages
Epson BrightLink 696Ui is an interactive projector that transforms any surface into an interactive whiteboard. With its user-friendly interface and versatile connectivity options, you can easily connect your computer, tablet, or other devices to share content and collaborate with others. Unleash your creativity and enhance your presentations with the ability to annotate, draw, and interact with content in real time. The BrightLink 696Ui also supports dual pen and multi-touch functionality, allowing for simultaneous collaboration and engagement.
advertisement
Using the Remote Control
Turn projector on/off
Access menu system for additional adjustments
Calibrate
Page through documents
Temporarily turn off image and sound
Select from various image sources connected to the projector
Switch between
PC Interactive and
PC Free Annotation
Enter
Zoom in and out
Stop video action
Display Home screen
For more information on using the remote control:
• See the online BrightLink User’s Guide.
• Watch a video or two at
www.epson.com/brightlinkvideos (U.S.) or
www.epson.ca/brightlinkvideos (Canada).
Choosing the Right Tool
If you already have annotation software, you can use it with your BrightLink projector. If you are using Microsoft ®
Office 2003 or later, you can also use the “inking tools” to add handwritten notes to your documents and
PowerPoint ® presentations.
Here are some tips on choosing from the tools that came with your BrightLink projector:
Built-in
Toolbar
Easy
Interactive
Tools
No computer?
Use pen or finger as a mouse
Use the board to draw on computer content
Draw on board using the computer
Use two pens and up to two fingers simultaneously
Use up to two pens and six fingers simultaneously*
Save annotations as a
JPEG
Save annotations in image, PDF, or editable format
* Depending on connection type. See the online
BrightLink User’s Guide for more information.
Calibration
Calibration coordinates the position of the pen or your finger with the location of your cursor. If the pen or finger position and cursor location don’t match, you can perform auto calibration, or you can calibrate manually for even greater accuracy.
Note: You must perform pen calibration before calibrating finger touch.
Pen Calibration
1 To start pen calibration, press the User button on the remote control, or press the Home button and select
Auto Calibration.
2 When you see the Auto Calibration screen, do one of the following:
• Press to run auto calibration, then wait until calibration is complete.
• Select No, then press and follow the steps below to calibrate manually.
3 Select Manual Calibration, then press .
4 When you see the Manual Calibration screen, press
to select Yes.
5 Touch the center of the circles on the screen with your pen to perform manual calibration.
Finger Touch Calibration
Note: If you are unable to perform finger touch calibration, make sure that the installer properly installed the Touch Unit and performed the angle adjustment.
1 To start finger touch calibration, press the User button on the remote control, or press the Home button and select Auto Calibration.
2 When you see the Auto Calibration screen, select
No, then press and follow the steps below.
3 Select Touch Unit Setup, then press .
4 Select Touch Calibration, then press .
5 When you see the Touch Calibration screen, press
to select Yes.
A green circle appears in the upper left corner of your projected image.
6 Touch and hold the center of the circle with your finger until the circle disappears and another one appears.
Note: Make sure you touch the center of each circle; otherwise the calibration may not be accurate.
7 Continue until all of the circles disappear.
For more detailed instructions, see the online BrightLink
User’s Guide.
Need Help?
Telephone Support
The Epson ® PrivateLine ® service is for you!
All you have to do is call (800) 637-7661. This service is available for the duration of your warranty period.
You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S) or (905) 709-3839 (Canada).
Support hours are 6 am
to 8 pm
, Pacific Time, Monday through Friday, and 7 am
to 4 pm
, Pacific Time, Saturday.
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Online Support
To access the online User’s Guide, get FAQs, and more, visit www.epson/com/brightlinkdownloads (U.S.) or
www.epson.ca/brightlinkdownloads (Canada) and select your product.
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. BrightLink and PrivateLine are registered trademarks of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2016 Epson America, Inc., 9/16
Printed in XXXXXX
CPD-52474
BrightLink ® 696Ui
Start Here
Follow the steps on this card to get started with your
BrightLink projector:
1
Connecting your computer and installing interactive software
2
Interacting with the screen
3
Using the built-in toolbar
BrightLink Interaction
The BrightLink interactive pens turn any wall or table into an interactive area, with or without a computer.
The projector control toolbar lets you control the projector from the screen just as you would using the remote control.
Easy Interactive Tools
With a computer, you can use Easy
Interactive Tools. This software lets you use the interactive pens or your finger as a mouse to annotate, save, and interact with content from your computer.
Drawing toolbar
Command toolbar
Built-in Toolbar
Without a computer, you can use the toolbar that is built into the projector
(PC Free Annotation). This lets you annotate images from a document camera, tablet, DVD player, or other source connected to your projector.
Students and colleagues can connect their own laptops and annotate on the fly using the built-in toolbar, without installing software.
1
Connecting Your
Computer and Installing
Interactive Software
1 Turn on the projector by pressing the blue power button on the remote control.
2 Connect an HDMI or VGA cable from the projector to your computer.
HDMI
VGA
Note: You can also display media through a USB connection with the USB Display feature. See the online BrightLink User’s Guide for more information.
3 Connect the USB cable from the projector’s USB
TypeB port directly to any available USB port on your computer.
4 The default language of the menu system is English.
To select another language, press the Menu button on the remote control. Select Extended and press
. Select Language and press . Select your language and press . Press the Menu button to exit the menu system.
5 Display an image from your computer. If the image doesn’t appear, try one of the following:
• On some Windows ® laptops, you may need to hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On Windows 7 or later, hold down the Windows key and press P at the same time, then click
Duplicate.
• On a Mac, you may need to open System
Preferences and select Displays. Click the
Arrangement tab and select the Mirror Displays checkbox.
• Try pressing the Source Search button on the remote control.
• Press the Home button on the remote control to verify the source input and settings.
You may already have interactive software on your computer, or you may need to install it. If you are using a Mac, you need Easy Interactive Driver and Easy
Interactive Tools (or other interactive software). For
Windows, you only need Easy Interactive Tools (or other interactive software).
Here’s how to find out if the Easy Interactive Tools software is installed on your computer:
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the Easy Interactive software is installed.
If you are using Windows:
Windows 10/Windows 8.x – Navigate to the Apps screen or All Apps menu and look for Easy Interactive
Tools.
All other versions – Select or Start > All Programs or Programs > EPSON Projector > Easy Interactive
Tools Ver. 4.2.
If you see Easy Interactive Tools, the software is installed.
If the software is not installed, do one of the following to install it:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
• Download the most up-to-date version from:
www.epson.com/brightlinkdownloads (U.S.)
www.epson.ca/brightlinkdownloads (Canada)
www.epson.com.jm/support (Caribbean)
For more information about Easy Interactive Tools, see the online Easy Interactive Tools tip sheet or the online
BrightLink User’s Guide.
2
Interacting With the
Screen
Interactive Pens
Your projector came with 2 pens, one orange (Interactive
Pen A) and one blue (Interactive Pen B).
The pens have two different types of tips: a soft, felt tip and a hard tip. Make sure one AA battery is installed in each pen.
Battery cover
Pen tip
(unscrew to replace)
Battery light
Button
• To turn on the pen, pick it up. The blue light comes on briefly. If the battery is low, the light flashes.
• Hold the pen perpendicular to the board, as shown below.
Using Your Pen or Finger as a Mouse
When you are in computer interactive mode, you can use the pen or your finger as a mouse to interact with your computer desktop.
Mouse function
Left-click
Double-click
Right-click
Move cursor
Click and drag
Pen/finger action
Tap on board
Tap twice
Press pen button
Tap and hold finger for
3 seconds
Hover over board
Tap and hold on item, then drag
If your device supports these functions, you can also do the following:
• To zoom in or out, touch an item using two fingers and either move your fingers away from each other (zoom in) or toward each other (zoom out).
• To rotate an image, touch the image with two fingers and then rotate your hand.
• To scroll up or down on a page, or move backward or forward in a browser window, use swiping gestures or flicks.
See the online BrightLink User’s Guide for more information.
Having Trouble?
If the cursor does not match your pen or finger location, follow the calibration instructions on the back of this card.
• When you are finished using the pen, simply place it in an area away from the projection screen.
Note: The pens turn off automatically after about 15 seconds of inactivity. Pick the pen up to turn it back on.
Finger Touch
You can use your finger to perform the same functions as the interactive pen when the Touch Unit is installed. You can use either the pen or your finger, or use both at the same time.
When performing finger touch operations, you can use two fingers in annotation and whiteboard modes, or up to six fingers in computer interactive mode.
3
Using the Built-in Toolbar
The projector’s built-in toolbar lets you annotate images from other devices that have been connected to the projector, such as a document camera, tablet, or other source. This is known as PC Free Annotation mode.
1 Press one of the source buttons on the remote control to select the source for the image you want to annotate.
Image from a computer connected to the Computer1 or
Computer2 port
Image from a computer with an HDMI connection, or a video player
Image from an external device connected to the
USB port
Image from a computer or tablet connected through a wired or wireless network
2 To activate the toolbar, tap the board with the pen or your finger. If you don’t see the icon, tap the icon and then tap the icon.
Note: If you only see the icon, you are already in
PC Free Annotation mode.
3 To close the toolbar, tap the icon at the bottom of the toolbar.
Two different toolbars are available in PC Free Annotation mode, one for annotation mode and one for whiteboard mode.
Many of the tools are the same as Easy Interactive Tools, but fewer functions are available.
• Annotation mode displays the built-in toolbar on whatever image is being projected.
• Whiteboard mode lets you project a white or black screen or background pattern, and use the pen or your finger to write or draw as you would on a chalkboard or dry erase board.
Select annotation mode
Select whiteboard mode
Undo
Select the background pattern*
Choose custom color and width
Erase—select small or large dot for thin or thick eraser
Hide or show toolbar while drawing
Redo
Use custom pen
Use highlighter
Use black, red, or blue pen—select small or large dot for thin or thick line
Clear all drawing
Close toolbar
* In annotation mode, the
Shows the current pen and finger touch function
select background tool does not appear.
1
Connecting Your
Computer and Installing
Interactive Software
1 Turn on the projector by pressing the blue power button on the remote control.
2 Connect an HDMI or VGA cable from the projector to your computer.
HDMI
VGA
Note: You can also display media through a USB connection with the USB Display feature. See the online BrightLink User’s Guide for more information.
3 Connect the USB cable from the projector’s USB
TypeB port directly to any available USB port on your computer.
4 The default language of the menu system is English.
To select another language, press the Menu button on the remote control. Select Extended and press
. Select Language and press . Select your language and press . Press the Menu button to exit the menu system.
5 Display an image from your computer. If the image doesn’t appear, try one of the following:
• On some Windows ® laptops, you may need to hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On Windows 7 or later, hold down the Windows key and press P at the same time, then click
Duplicate.
• On a Mac, you may need to open System
Preferences and select Displays. Click the
Arrangement tab and select the Mirror Displays checkbox.
• Try pressing the Source Search button on the remote control.
• Press the Home button on the remote control to verify the source input and settings.
You may already have interactive software on your computer, or you may need to install it. If you are using a Mac, you need Easy Interactive Driver and Easy
Interactive Tools (or other interactive software). For
Windows, you only need Easy Interactive Tools (or other interactive software).
Here’s how to find out if the Easy Interactive Tools software is installed on your computer:
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the Easy Interactive software is installed.
If you are using Windows:
Windows 10/Windows 8.x – Navigate to the Apps screen or All Apps menu and look for Easy Interactive
Tools.
All other versions – Select or Start > All Programs or Programs > EPSON Projector > Easy Interactive
Tools Ver. 4.2.
If you see Easy Interactive Tools, the software is installed.
If the software is not installed, do one of the following to install it:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
• Download the most up-to-date version from:
www.epson.com/brightlinkdownloads (U.S.)
www.epson.ca/brightlinkdownloads (Canada)
www.epson.com.jm/support (Caribbean)
For more information about Easy Interactive Tools, see the online Easy Interactive Tools tip sheet or the online
BrightLink User’s Guide.
2
Interacting With the
Screen
Interactive Pens
Your projector came with 2 pens, one orange (Interactive
Pen A) and one blue (Interactive Pen B).
The pens have two different types of tips: a soft, felt tip and a hard tip. Make sure one AA battery is installed in each pen.
Battery cover
Pen tip
(unscrew to replace)
Battery light
Button
• To turn on the pen, pick it up. The blue light comes on briefly. If the battery is low, the light flashes.
• Hold the pen perpendicular to the board, as shown below.
Using Your Pen or Finger as a Mouse
When you are in computer interactive mode, you can use the pen or your finger as a mouse to interact with your computer desktop.
Mouse function
Left-click
Double-click
Right-click
Move cursor
Click and drag
Pen/finger action
Tap on board
Tap twice
Press pen button
Tap and hold finger for
3 seconds
Hover over board
Tap and hold on item, then drag
If your device supports these functions, you can also do the following:
• To zoom in or out, touch an item using two fingers and either move your fingers away from each other (zoom in) or toward each other (zoom out).
• To rotate an image, touch the image with two fingers and then rotate your hand.
• To scroll up or down on a page, or move backward or forward in a browser window, use swiping gestures or flicks.
See the online BrightLink User’s Guide for more information.
Having Trouble?
If the cursor does not match your pen or finger location, follow the calibration instructions on the back of this card.
• When you are finished using the pen, simply place it in an area away from the projection screen.
Note: The pens turn off automatically after about 15 seconds of inactivity. Pick the pen up to turn it back on.
Finger Touch
You can use your finger to perform the same functions as the interactive pen when the Touch Unit is installed. You can use either the pen or your finger, or use both at the same time.
When performing finger touch operations, you can use two fingers in annotation and whiteboard modes, or up to six fingers in computer interactive mode.
3
Using the Built-in Toolbar
The projector’s built-in toolbar lets you annotate images from other devices that have been connected to the projector, such as a document camera, tablet, or other source. This is known as PC Free Annotation mode.
1 Press one of the source buttons on the remote control to select the source for the image you want to annotate.
Image from a computer connected to the Computer1 or
Computer2 port
Image from a computer with an HDMI connection, or a video player
Image from an external device connected to the
USB port
Image from a computer or tablet connected through a wired or wireless network
2 To activate the toolbar, tap the board with the pen or your finger. If you don’t see the icon, tap the icon and then tap the icon.
Note: If you only see the icon, you are already in
PC Free Annotation mode.
3 To close the toolbar, tap the icon at the bottom of the toolbar.
Two different toolbars are available in PC Free Annotation mode, one for annotation mode and one for whiteboard mode.
Many of the tools are the same as Easy Interactive Tools, but fewer functions are available.
• Annotation mode displays the built-in toolbar on whatever image is being projected.
• Whiteboard mode lets you project a white or black screen or background pattern, and use the pen or your finger to write or draw as you would on a chalkboard or dry erase board.
Select annotation mode
Select whiteboard mode
Undo
Select the background pattern*
Choose custom color and width
Erase—select small or large dot for thin or thick eraser
Hide or show toolbar while drawing
Redo
Use custom pen
Use highlighter
Use black, red, or blue pen—select small or large dot for thin or thick line
Clear all drawing
Close toolbar
* In annotation mode, the
Shows the current pen and finger touch function
select background tool does not appear.
1
Connecting Your
Computer and Installing
Interactive Software
1 Turn on the projector by pressing the blue power button on the remote control.
2 Connect an HDMI or VGA cable from the projector to your computer.
HDMI
VGA
Note: You can also display media through a USB connection with the USB Display feature. See the online BrightLink User’s Guide for more information.
3 Connect the USB cable from the projector’s USB
TypeB port directly to any available USB port on your computer.
4 The default language of the menu system is English.
To select another language, press the Menu button on the remote control. Select Extended and press
. Select Language and press . Select your language and press . Press the Menu button to exit the menu system.
5 Display an image from your computer. If the image doesn’t appear, try one of the following:
• On some Windows ® laptops, you may need to hold down the Fn key on the keyboard and press
F7 or the function key that lets you display on an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
• On Windows 7 or later, hold down the Windows key and press P at the same time, then click
Duplicate.
• On a Mac, you may need to open System
Preferences and select Displays. Click the
Arrangement tab and select the Mirror Displays checkbox.
• Try pressing the Source Search button on the remote control.
• Press the Home button on the remote control to verify the source input and settings.
You may already have interactive software on your computer, or you may need to install it. If you are using a Mac, you need Easy Interactive Driver and Easy
Interactive Tools (or other interactive software). For
Windows, you only need Easy Interactive Tools (or other interactive software).
Here’s how to find out if the Easy Interactive Tools software is installed on your computer:
If you are using a Mac:
Look for the Easy Interactive Driver and Easy Interactive
Tools folders in the Application folder on your hard drive.
If you see these folders, the Easy Interactive software is installed.
If you are using Windows:
Windows 10/Windows 8.x – Navigate to the Apps screen or All Apps menu and look for Easy Interactive
Tools.
All other versions – Select or Start > All Programs or Programs > EPSON Projector > Easy Interactive
Tools Ver. 4.2.
If you see Easy Interactive Tools, the software is installed.
If the software is not installed, do one of the following to install it:
• Use the CD that came with the projector, labeled
“EPSON Projector Software for Easy Interactive
Function”
• Download the most up-to-date version from:
www.epson.com/brightlinkdownloads (U.S.)
www.epson.ca/brightlinkdownloads (Canada)
www.epson.com.jm/support (Caribbean)
For more information about Easy Interactive Tools, see the online Easy Interactive Tools tip sheet or the online
BrightLink User’s Guide.
2
Interacting With the
Screen
Interactive Pens
Your projector came with 2 pens, one orange (Interactive
Pen A) and one blue (Interactive Pen B).
The pens have two different types of tips: a soft, felt tip and a hard tip. Make sure one AA battery is installed in each pen.
Battery cover
Pen tip
(unscrew to replace)
Battery light
Button
• To turn on the pen, pick it up. The blue light comes on briefly. If the battery is low, the light flashes.
• Hold the pen perpendicular to the board, as shown below.
Using Your Pen or Finger as a Mouse
When you are in computer interactive mode, you can use the pen or your finger as a mouse to interact with your computer desktop.
Mouse function
Left-click
Double-click
Right-click
Move cursor
Click and drag
Pen/finger action
Tap on board
Tap twice
Press pen button
Tap and hold finger for
3 seconds
Hover over board
Tap and hold on item, then drag
If your device supports these functions, you can also do the following:
• To zoom in or out, touch an item using two fingers and either move your fingers away from each other (zoom in) or toward each other (zoom out).
• To rotate an image, touch the image with two fingers and then rotate your hand.
• To scroll up or down on a page, or move backward or forward in a browser window, use swiping gestures or flicks.
See the online BrightLink User’s Guide for more information.
Having Trouble?
If the cursor does not match your pen or finger location, follow the calibration instructions on the back of this card.
• When you are finished using the pen, simply place it in an area away from the projection screen.
Note: The pens turn off automatically after about 15 seconds of inactivity. Pick the pen up to turn it back on.
Finger Touch
You can use your finger to perform the same functions as the interactive pen when the Touch Unit is installed. You can use either the pen or your finger, or use both at the same time.
When performing finger touch operations, you can use two fingers in annotation and whiteboard modes, or up to six fingers in computer interactive mode.
3
Using the Built-in Toolbar
The projector’s built-in toolbar lets you annotate images from other devices that have been connected to the projector, such as a document camera, tablet, or other source. This is known as PC Free Annotation mode.
1 Press one of the source buttons on the remote control to select the source for the image you want to annotate.
Image from a computer connected to the Computer1 or
Computer2 port
Image from a computer with an HDMI connection, or a video player
Image from an external device connected to the
USB port
Image from a computer or tablet connected through a wired or wireless network
2 To activate the toolbar, tap the board with the pen or your finger. If you don’t see the icon, tap the icon and then tap the icon.
Note: If you only see the icon, you are already in
PC Free Annotation mode.
3 To close the toolbar, tap the icon at the bottom of the toolbar.
Two different toolbars are available in PC Free Annotation mode, one for annotation mode and one for whiteboard mode.
Many of the tools are the same as Easy Interactive Tools, but fewer functions are available.
• Annotation mode displays the built-in toolbar on whatever image is being projected.
• Whiteboard mode lets you project a white or black screen or background pattern, and use the pen or your finger to write or draw as you would on a chalkboard or dry erase board.
Select annotation mode
Select whiteboard mode
Undo
Select the background pattern*
Choose custom color and width
Erase—select small or large dot for thin or thick eraser
Hide or show toolbar while drawing
Redo
Use custom pen
Use highlighter
Use black, red, or blue pen—select small or large dot for thin or thick line
Clear all drawing
Close toolbar
* In annotation mode, the
Shows the current pen and finger touch function
select background tool does not appear.
Using the Remote Control
Turn projector on/off
Access menu system for additional adjustments
Calibrate
Page through documents
Temporarily turn off image and sound
Select from various image sources connected to the projector
Switch between
PC Interactive and
PC Free Annotation
Enter
Zoom in and out
Stop video action
Display Home screen
For more information on using the remote control:
• See the online BrightLink User’s Guide.
• Watch a video or two at
www.epson.com/brightlinkvideos (U.S.) or
www.epson.ca/brightlinkvideos (Canada).
Choosing the Right Tool
If you already have annotation software, you can use it with your BrightLink projector. If you are using Microsoft ®
Office 2003 or later, you can also use the “inking tools” to add handwritten notes to your documents and
PowerPoint ® presentations.
Here are some tips on choosing from the tools that came with your BrightLink projector:
Built-in
Toolbar
Easy
Interactive
Tools
No computer?
Use pen or finger as a mouse
Use the board to draw on computer content
Draw on board using the computer
Use two pens and up to two fingers simultaneously
Use up to two pens and six fingers simultaneously*
Save annotations as a
JPEG
Save annotations in image, PDF, or editable format
* Depending on connection type. See the online
BrightLink User’s Guide for more information.
Calibration
Calibration coordinates the position of the pen or your finger with the location of your cursor. If the pen or finger position and cursor location don’t match, you can perform auto calibration, or you can calibrate manually for even greater accuracy.
Note: You must perform pen calibration before calibrating finger touch.
Pen Calibration
1 To start pen calibration, press the User button on the remote control, or press the Home button and select
Auto Calibration.
2 When you see the Auto Calibration screen, do one of the following:
• Press to run auto calibration, then wait until calibration is complete.
• Select No, then press and follow the steps below to calibrate manually.
3 Select Manual Calibration, then press .
4 When you see the Manual Calibration screen, press
to select Yes.
5 Touch the center of the circles on the screen with your pen to perform manual calibration.
Finger Touch Calibration
Note: If you are unable to perform finger touch calibration, make sure that the installer properly installed the Touch Unit and performed the angle adjustment.
1 To start finger touch calibration, press the User button on the remote control, or press the Home button and select Auto Calibration.
2 When you see the Auto Calibration screen, select
No, then press and follow the steps below.
3 Select Touch Unit Setup, then press .
4 Select Touch Calibration, then press .
5 When you see the Touch Calibration screen, press
to select Yes.
A green circle appears in the upper left corner of your projected image.
6 Touch and hold the center of the circle with your finger until the circle disappears and another one appears.
Note: Make sure you touch the center of each circle; otherwise the calibration may not be accurate.
7 Continue until all of the circles disappear.
For more detailed instructions, see the online BrightLink
User’s Guide.
Need Help?
Telephone Support
The Epson ® PrivateLine ® service is for you!
All you have to do is call (800) 637-7661. This service is available for the duration of your warranty period.
You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S) or (905) 709-3839 (Canada).
Support hours are 6 am
to 8 pm
, Pacific Time, Monday through Friday, and 7 am
to 4 pm
, Pacific Time, Saturday.
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Online Support
To access the online User’s Guide, get FAQs, and more, visit www.epson/com/brightlinkdownloads (U.S.) or
www.epson.ca/brightlinkdownloads (Canada) and select your product.
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. BrightLink and PrivateLine are registered trademarks of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2016 Epson America, Inc., 9/16
Printed in XXXXXX
CPD-52474
BrightLink ® 696Ui
Start Here
Follow the steps on this card to get started with your
BrightLink projector:
1
Connecting your computer and installing interactive software
2
Interacting with the screen
3
Using the built-in toolbar
BrightLink Interaction
The BrightLink interactive pens turn any wall or table into an interactive area, with or without a computer.
The projector control toolbar lets you control the projector from the screen just as you would using the remote control.
Easy Interactive Tools
With a computer, you can use Easy
Interactive Tools. This software lets you use the interactive pens or your finger as a mouse to annotate, save, and interact with content from your computer.
Drawing toolbar
Command toolbar
Built-in Toolbar
Without a computer, you can use the toolbar that is built into the projector
(PC Free Annotation). This lets you annotate images from a document camera, tablet, DVD player, or other source connected to your projector.
Students and colleagues can connect their own laptops and annotate on the fly using the built-in toolbar, without installing software.
Using the Remote Control
Turn projector on/off
Access menu system for additional adjustments
Calibrate
Page through documents
Temporarily turn off image and sound
Select from various image sources connected to the projector
Switch between
PC Interactive and
PC Free Annotation
Enter
Zoom in and out
Stop video action
Display Home screen
For more information on using the remote control:
• See the online BrightLink User’s Guide.
• Watch a video or two at
www.epson.com/brightlinkvideos (U.S.) or
www.epson.ca/brightlinkvideos (Canada).
Choosing the Right Tool
If you already have annotation software, you can use it with your BrightLink projector. If you are using Microsoft ®
Office 2003 or later, you can also use the “inking tools” to add handwritten notes to your documents and
PowerPoint ® presentations.
Here are some tips on choosing from the tools that came with your BrightLink projector:
Built-in
Toolbar
Easy
Interactive
Tools
No computer?
Use pen or finger as a mouse
Use the board to draw on computer content
Draw on board using the computer
Use two pens and up to two fingers simultaneously
Use up to two pens and six fingers simultaneously*
Save annotations as a
JPEG
Save annotations in image, PDF, or editable format
* Depending on connection type. See the online
BrightLink User’s Guide for more information.
Calibration
Calibration coordinates the position of the pen or your finger with the location of your cursor. If the pen or finger position and cursor location don’t match, you can perform auto calibration, or you can calibrate manually for even greater accuracy.
Note: You must perform pen calibration before calibrating finger touch.
Pen Calibration
1 To start pen calibration, press the User button on the remote control, or press the Home button and select
Auto Calibration.
2 When you see the Auto Calibration screen, do one of the following:
• Press to run auto calibration, then wait until calibration is complete.
• Select No, then press and follow the steps below to calibrate manually.
3 Select Manual Calibration, then press .
4 When you see the Manual Calibration screen, press
to select Yes.
5 Touch the center of the circles on the screen with your pen to perform manual calibration.
Finger Touch Calibration
Note: If you are unable to perform finger touch calibration, make sure that the installer properly installed the Touch Unit and performed the angle adjustment.
1 To start finger touch calibration, press the User button on the remote control, or press the Home button and select Auto Calibration.
2 When you see the Auto Calibration screen, select
No, then press and follow the steps below.
3 Select Touch Unit Setup, then press .
4 Select Touch Calibration, then press .
5 When you see the Touch Calibration screen, press
to select Yes.
A green circle appears in the upper left corner of your projected image.
6 Touch and hold the center of the circle with your finger until the circle disappears and another one appears.
Note: Make sure you touch the center of each circle; otherwise the calibration may not be accurate.
7 Continue until all of the circles disappear.
For more detailed instructions, see the online BrightLink
User’s Guide.
Need Help?
Telephone Support
The Epson ® PrivateLine ® service is for you!
All you have to do is call (800) 637-7661. This service is available for the duration of your warranty period.
You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S) or (905) 709-3839 (Canada).
Support hours are 6 am
to 8 pm
, Pacific Time, Monday through Friday, and 7 am
to 4 pm
, Pacific Time, Saturday.
Days and hours of support are subject to change without notice. Toll or long distance charges may apply.
Online Support
To access the online User’s Guide, get FAQs, and more, visit www.epson/com/brightlinkdownloads (U.S.) or
www.epson.ca/brightlinkdownloads (Canada) and select your product.
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. BrightLink and PrivateLine are registered trademarks of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2016 Epson America, Inc., 9/16
Printed in XXXXXX
CPD-52474
BrightLink ® 696Ui
Start Here
Follow the steps on this card to get started with your
BrightLink projector:
1
Connecting your computer and installing interactive software
2
Interacting with the screen
3
Using the built-in toolbar
BrightLink Interaction
The BrightLink interactive pens turn any wall or table into an interactive area, with or without a computer.
The projector control toolbar lets you control the projector from the screen just as you would using the remote control.
Easy Interactive Tools
With a computer, you can use Easy
Interactive Tools. This software lets you use the interactive pens or your finger as a mouse to annotate, save, and interact with content from your computer.
Drawing toolbar
Command toolbar
Built-in Toolbar
Without a computer, you can use the toolbar that is built into the projector
(PC Free Annotation). This lets you annotate images from a document camera, tablet, DVD player, or other source connected to your projector.
Students and colleagues can connect their own laptops and annotate on the fly using the built-in toolbar, without installing software.
advertisement
Key Features
- Short throw Short throw projector Grey, White
- 3LCD 3800 ANSI lumens
- Lamp 5000 h
- WUXGA (1920x1200) 16:10 300:1
- Screen size compatibility: 1778 - 2540 mm (70 - 100") Number of colours: 1.073 billion colours
- Focus: Manual
- Ethernet LAN
- Built-in speaker(s) 16 W
- AC 400 W