Modal MD-WORCSS6 Quick Setup Manual

Features

Release button

R E C H A R G E A B L E

W I N E O P E N E R

MD-WORCSS6

Package contents

• Wine opener

• Base

Extract button

Stainless steel case

• Foil cutter

• Quick Setup Guide

LED

Base

Foil cutter

Before using your new product, please read these instructions to prevent any damage.

Q U I C K S E T U P G U I D E

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

READ ALL INSTRUCTIONS BEFORE USE

1 Do not operate the electric wine opener with a damaged cord or plug, after the appliance malfunctions, or if it is dropped or damaged in any manner. Return the appliance to the nearest

Authorized Service Center for examination, repair or electrical or mechanical adjustment.

2 To protect against the risk of electrical shock, do not put the electric wine opener in water or other liquid.

This may cause personal injury and/or damage to the product.

3 To protect against fire, do not operate the electric wine opener in the presence of explosive and/or flammable fumes.

4 Do not use the electric wine opener for other than its intended use.

5 This product is intended for normal domestic household use only.

6 When using or recharging the electric wine opener, keep your workspace clean and free from potential hazards.

7 For indoor use only. Do not expose the electric wine opener or changing unit to rain or other extreme conditions.

8 Never force the electric wine opener onto a bottle or attempt to speed up the mechanism. The electric wine opener works best when it is operated at its intended speed.

9 Do not touch or adjust the electric wine opener’s mechanism or the corkscrew spiral . Only hold the electric wine opener by its housing.

10 Do not attempt to open bottles if the switch is not working correctly.

11 Do not attempt to open the electric wine opener. It has no user-serviceable parts.

12 Never remove the plug from the socket by pulling the power cord.

ATTENTION: The corkscrew is sharp. Handle carefully. Keep hands and utensils out of the wine opener while operating to prevent the possibility of severe personal injury and/or damage to the product or property.

Charging your electric wine opener

Plug the output (DC) end of the AC adapter into the back of your electric wine opener and the other end into a standard 120V AC wall outlet. The LED turns on, and your wine opener starts charging. It takes approximately 16 hours to fully charge your electric wine opener the first time. After that, charging will take 10-11 hours. The charging circuit will shut off automatically when battery is fully charged.

Using your wine opener

1 Make sure your electric wine opener is charged. Follow the instructions for charging above.

2 Remove the foil around the top of the wine bottle using the foil cutter provided.

3 Place the electric wine opener on top of the wine bottle.

Note : Make sure that it remains as upright as possible at all times. If held at an angle, the electric wine opener will not remove the cork properly.

4

5

6

Hold the electric wine opener firmly and press the Extract button. The corkscrew turns in a clockwise direction and enters the cork, gradually removing it from the bottle. When the electric wine opener stops, the cork has been fully removed from the bottle and you can lift the electric wine opener away.

To remove the cork, press the Release button. The

LED turns on and the corkscrew reverses direction, releasing the cork.

Always return the electric wine opener to the base when you are finished with it to protect the mechanism while it is not in use.

Speci

fi

cations

• Opens 30 bottles when fully charged

FCC Statement

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

One-year limited warranty

Contact Modal:

For customer support, call 1-800-499-3402

(U.S. and Canada) www.bestbuy.com/modal

MODAL is a trademark of Best Buy and its affiliated companies.

Distributed by Best Buy Purchasing, LLC

©2015 Best Buy. All rights reserved.

Made in China

V3 ENGLISH 15-0764