Cisco Headset 560 Quick Reference Guide
Add to My manuals2 Pages
Cisco Headset 500 Series
The Cisco Headset 500 Series is a high-quality headset designed for use with a variety of devices, including smartphones, tablets, and computers. It features a noise-canceling microphone and adjustable headband for a comfortable fit. The headset also has a built-in call button for easy call management.
With its superior sound quality and advanced features, the Cisco Headset 500 Series is perfect for professionals who need to stay connected while on the go.
advertisement
Cisco Headset 560 Series with Standard Base
Quick Reference Guide
Power/Call
Mute
Volume +/-
High Sound Pressure—Avoid listening to high volume levels for long periods to prevent possible hearing damage.
When you plug in your headset, lower the volume of the headset speaker before you put the headset on. If you remember to lower the volume before you take the headset off, the volume will start lower when you plug in your headset again.
Be aware of your surroundings. When you use your headset, it may block out important external sounds, particularly in emergencies or in noisy environments. Don’t use the headset while driving. Don’t leave your headset or headset cables in an area where people or pets can trip over them. Always supervise children who are near your headset or headset cables.
Headset LED status indication
Incoming Call
Active Call
Blinking red
Steady red
Headset paired with dock White LED blinking every 4 seconds
Headset and dock not paired White LED blinking rapidly
Base LED status indication
Battery strength
System updating
Headset and dock not paired
LEDs show solid as battery charges
LEDs blink in sequence from left to right
All LEDs blinking
Call Indication
Incoming call Blinking green
Active call
Muted call
Steady green
Steady red
Cisco Headset 560 Series with Standard Base
Quick Reference Guide
Turn on/off your headset
Hold for 4 seconds.
You will hear a tone indicating headset status.
Make a call
Press .
Put a call on hold
Press .
End a call
Hold until you hear a tone.
Reject a call
Press twice.
Adjust your volume
Press .
Mute yourself on a call
Press .
Unmute yourself on a call
Press again.
End a call and answer an incoming call
1. Hold until you hear a tone.
2. Press .
End a call and resume a held call
1. Hold until you hear a tone.
2. Select the call you would like to resume.
3. Press .
Put a call on hold and answer an incoming call
Press .
Put a call on hold and resume a call
1. Press .
2. Optional: Select the call you would like to resume.
3. Press again.
For more information, visit: http://www.cisco.com/go/headsets
Cisco and the Cisco logo are trademarks or registered trademarks of
Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Copyright. © 2018 Cisco Systems, Inc. All rights reserved.
June 2019
advertisement
Related manuals
advertisement