STGB8NC60K - STGD8NC60K
STGP8NC60K
N-channel 600V - 8A - D
2
PAK / DPAK / TO-220
Short circuit rated PowerMESH™ IGBT
Features
Type
STGB8NC60K
STGD8NC60K
STGP8NC60K
V
CES
600V
600V
600V
V
CE(sat)
Typ
@25°C
2.2V
2.2V
2.2V
I
C
@100°C
8A
8A
8A
■
■
■
■
Lower on voltage drop (V cesat
)
Lower C
RES
/ C
IES
ratio (no cross-conduction susceptibility)
Very soft ultra fast recovery antiparallel diode
Short circuit withstand time 10µs
Applications
■
■
■
High frequency motor controls
SMPS and PFC in both hard switch and resonant topologies
Motor drivers
Description
Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the
PowerMESH™ IGBTs, with outstanding performances. The suffix “K” identifies a family optimized for high frequency motor control applications with short circuit withstand capability.
Device summary
Order codes Marking
STGB8NC60K
STGD8NC60K
STGP8NC60K
GB8NC60K
GD8NC60K
GP8NC60K
TO-220
1
2
3
Figure 1.
Internal schematic diagram
Package
D²PAK
DPAK
TO-220
1
D
²
PAK
3
1
3
DPAK
Packaging
Tape & reel
Tape & reel
Tube
October 2007 Rev 1 1/17 www.st.com
17
5
6
3
4
1
2
Contents
Contents
STGB8NC60K - STGD8NC60K - STGP8NC60K
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Obsolete Product(s) - Obsolete Product(s)
2/17
STGB8NC60K - STGD8NC60K - STGP8NC60K Electrical ratings
Table 2.
Absolute maximum ratings
Value
Symbol Parameter
D²PAK/TO-220
V
CES
I
C
(1)
I
C
(1)
I
CP
(2)
V
GE
P
TOT
T j
T scw
Collector-emitter voltage (V
Pulsed collector current
Gate-emitter voltage
Total dissipation at T
C
= 25°C
Operating junction temperature
Short circuit withstand time
GS
= 0)
Collector current (continuous) at T
Collector current (continuous) at T
C
C
= 25°C
= 100°C
1.
Calculated according to the iterative formula:
I
C
( T
C
) =
R
THJ – C
×
T – T
C
V
( )
( T
C
, I
C
)
65
600
15
8
30
±20
– 55 to 150
10
DPAK
62
2.
Pulse width limited by max junction temperature
Unit
A
A
V
W
°C
µs
V
A
Table 3.
Symbol
Thermal resistance
Parameter
Rthj-case Thermal resistance junction-case max
TO-220 / D²PAK
DPAK
Value
1.9
2.0
62.5
Unit
°C/W
°C/W
°C/W
Obsolete Product(s) - Obsolete Product(s)
3/17
Electrical characteristics STGB8NC60K - STGD8NC60K - STGP8NC60K
(T
CASE
=25°C unless otherwise specified)
Table 4.
Symbol
Static
Parameter Test conditions Min.
Typ.
Max.
Unit
V
BR(CES)
Collector-emitter breakdown voltage
V
V
I
CE(sat)
I
GE(th)
CES
GES g fs
I
C
= 1mA, V
GE
= 0
Collector-emitter saturation voltage
V
GE
= 15V, I
C
=3A
V
GE
= 15V, I
C
= 3A, Tc= 125°C
Gate threshold voltage
Collector cut-off current
(V
GE
= 0)
V
CE
= V
GE
, I
C
= 250 µA
V
CE
= Max rating,T
C
= 25°C
V
CE
=Max rating,T
C
= 125°C
Gate-emitter leakage current (V
CE
= 0)
V
GE
= ±20V, V
CE
= 0
Forward transconductance V
CE
= 15V
,
I
C
= 3A
600
4.5
2.2
1.8
15
2.75
6.5
150
1
±100
V
V
V
V
µA mA nA
S
Table 5.
Symbol
C ies
C oes
C res
Q g
Q ge
Q gc
Dynamic
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
Test conditions
V
CE
= 25V, f = 1MHz,
V
GE
= 0
V
CE
= 390V, I
C
= 3A,
V
GE
= 15V,
(see Figure 18)
Min.
Typ.
Max.
Unit
380
46
8.5
pF pF pF
19
5
9 nC nC nC
Obsolete Product(s) - Obsolete Product(s)
4/17
STGB8NC60K - STGD8NC60K - STGP8NC60K Electrical characteristics
Table 6.
Symbol t d(on) t r
(di/dt) on
Turn-on delay time
Current rise time
Turn-on current slope t r
(V off
) t d
( off
) t f t r
(V off
) t d
( off
) t f
Switching on/off (inductive load)
Parameter Test conditions t d(on) t r
(di/dt) on
Turn-on delay time
Current rise time
Turn-on current slope
Off voltage rise time
Turn-off delay time
Current fall time
Off voltage rise time
Turn-off delay time
Current fall time
V
CC
= 390V, I
C
= 3A
R
G
= 10 Ω , V
GE
= 15V,
Tj= 25°C
(see Figure 19)
V
CC
= 390V, I
C
=3A
R
G
= 10 Ω , V
GE
= 15V,
Tj=125°C
(see Figure 19)
V cc
= 390V, I
C
= 3A,
R
GE
= 10 Ω , V
GE
=15V,
T
J
=25°C
(see Figure 19)
V cc
= 390V, I
C
= 3A,
R
GE
=10 Ω , V
GE
=15V,
Tj=125°C
(see Figure 19)
Min.
Typ.
Max.
Unit
17
6
655 ns ns
A/µs
16.5
6.5
575
33
72
82 ns ns
A/µs ns ns ns
60
106
136 ns ns ns
Table 7.
Symbol
Switching energy (inductive load)
Parameter Test conditions Min.
Typ.
Max.
Unit
E on
(1)
E off
(2)
E ts
Turn-on switching losses
Turn-off switching losses
Total switching losses
V
CC
= 390V, I
C
= 3A
R
G
= 10
Ω
, V
GE
=15V, Tj=25°C
(see Figure 19)
55
85
140
E on
(1)
E off
(2)
E ts
Turn-on switching losses
Turn-off switching losses
Total switching losses
V
CC
= 390V, I
C
= 3A
R
G
= 10 Ω , V
GE
= 15V,
Tj= 125°C
(see Figure 19)
87
162
249
1.
Eon is the turn-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25°C and 125°C)
2.
Turn-off losses include also the tail of the collector current
Obsolete Product(s) - Obsolete Product(s)
µJ
µJ
µJ
µJ
µJ
µJ
5/17
Electrical characteristics
Figure 2.
Output characteristics
STGB8NC60K - STGD8NC60K - STGP8NC60K
Figure 3.
Transfer characteristics
Figure 4.
Transconductance Figure 5.
Collector-emitter on voltage vs temperature
Figure 6.
Gate charge vs gate-source voltage Figure 7.
Capacitance variations
Obsolete Product(s) - Obsolete Product(s)
6/17
STGB8NC60K - STGD8NC60K - STGP8NC60K Electrical characteristics
Figure 8.
Normalized gate threshold voltage vs temperature
Figure 9.
Collector-emitter on voltage vs collector current
Figure 10. Normalized breakdown voltage vs temperature
Figure 11. Switching losses vs temperature
Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector current
Obsolete Product(s) - Obsolete Product(s)
7/17
Electrical characteristics
Figure 14. Thermal impedance for TO-220/
D²PAK
STGB8NC60K - STGD8NC60K - STGP8NC60K
Figure 15. Turn-off SOA
Figure 16. Thermal impedance for DPAK
Obsolete Product(s) - Obsolete Product(s)
8/17
STGB8NC60K - STGD8NC60K - STGP8NC60K
3 Test circuit
Figure 17. Test circuit for inductive load switching
Figure 18. Gate charge test circuit
Test circuit
Figure 19. Switching waveform Figure 20. Diode recovery time waveform
Obsolete Product(s) - Obsolete Product(s)
9/17
Package mechanical data
4 Package mechanical data
STGB8NC60K - STGD8NC60K - STGP8NC60K
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
Obsolete Product(s) - Obsolete Product(s)
10/17
STGB8NC60K - STGD8NC60K - STGP8NC60K
Dim
D
D1
E e e1
F
A b b 1 c
H1
J1
L
L1
L20
L 3 0
∅
P
Q
Package mechanical data
TO-220 mechanical data
Min
4.40
0.61
1.14
0.4
9
15.25
10
2.40
4.
9 5
1.2
3
6.20
2.40
1 3
3 .50
3 .75
2.65
mm
Typ
1.27
16.40
2 8 .
9 0
Max
4.60
0.
88
1.70
0.70
15.75
10.40
2.70
5.15
1.
3 2
6.60
2.72
14
3 .
93
3 .
8 5
2.
9 5
Min
0.17
3
0.024
0.044
0.01
9
0.6
0.
393
0.0
9 4
0.1
9 4
0.04
8
0.244
0.0
9 4
0.511
0.1
3 7
0.147
0.104
inch
Typ
0.050
0.645
1.1
3 7
Max
0.1
8 1
0.0
3 4
0.066
0.027
0.62
0.40
9
0.106
0.202
0.051
0.256
0.107
0.551
0.154
0.151
0.116
Obsolete Product(s) - Obsolete Product(s)
11/17
Package mechanical data STGB8NC60K - STGD8NC60K - STGP8NC60K
DIM.
C
C2
D
D1
E
E1
A
A1
A2
B b4 e e1
H
L
(L1)
L2
L4
R
V2
4.4
9.35
1
0.6
0°
MIN.
2.2
0.9
0.03
0.64
5.2
0.45
0.48
6
6.4
DPAK MECHANICAL DATA
mm.
TYP
5.1
4.7
2.28
MAX.
2.4
1.1
0.23
0.9
5.4
0.6
0.6
6.2
6.6
MIN.
0.086
0.035
0.001
0.025
0.204
0.017
0.019
0.236
0.252
4.6
10.1
0.173
0.368
0.039
2.8
0.8
0.2
1
8°
0.023
0° inch
TYP.
0.200
0.185
0.090
0.110
0.031
0.008
MAX.
0.094
0.043
0.009
0.035
0.212
0.023
0.023
0.244
0.260
0.181
0.397
0.039
8°
Obsolete Product(s) - Obsolete Product(s)
0068772-F
12/17
STGB8NC60K - STGD8NC60K - STGP8NC60K Package mechanical data
Dim
G
L
L2
L 3
D
D1
E
E1
A
A1
A2
B
B2
C
C2
M
R
V2
10
4.
88
15
1.27
1.4
2.4
0°
Min
4.4
2.4
9
0.0
3
0.7
1.14
0.45
1.2
3
8 .
9 5 mm
Typ
8
8 .5
0.4
10.4
5.2
8
15.
8 5
1.4
1.75
3 .2
4°
Max
4.6
2.6
9
0.2
3
0.
93
1.7
0.6
1.
3 6
9 .
3 5
D²PAK mechanical data
0.
393
0.1
9 2
0.5
9 0
0.50
0.055
0.0
9 4
Min
0.17
3
0.0
98
0.001
0.027
0.044
0.017
0.04
8
0.
3 52 inch
Typ
0.
3 15
0.
33 4
0.015
0.40
9
0.20
8
0.625
0.55
0.6
8
0.126
Max
0.1
8 1
0.106
0.00
9
0.0
3 6
0.067
0.02
3
0.05
3
0.
3 6 8
Obsolete Product(s) - Obsolete Product(s)
13/17
Packaging mechanical data
5
STGB8NC60K - STGD8NC60K - STGP8NC60K
Packaging mechanical data
D
2
PAK FOOTPRINT
TAPE AND REEL SHIPMENT
G
N
T
A
B
C
D
REEL MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0795
24.4
26.4
0.960
1.039
100 3.937
30.4
1.197
TAPE MECHANICAL DATA
BASE QTY
1000
BULK QTY
1000
DIM.
A0
B0
D
D1
E
F mm inch
MIN.
MAX.
MIN.
MAX.
10.5
10.7
0.413 0.421
15.7
15.9
0.618 0.626
1.5
1.6
0.059 0.063
1.59
1.61
0.062 0.063
1.65
1.85
0.065 0.073
11.4
11.6
0.449 0.456
K0
P0
4.8
3.9
5.0
0.189 0.197
4.1
0.153 0.161
P1 11.9
12.1
0.468 0.476
P2 1.9
2.1
0.075 0.082
R
T
W
50 1.574
0.25
0.35 0.0098 0.0137
23.7
24.3
0.933 0.956
* on sales type
14/17
STGB8NC60K - STGD8NC60K - STGP8NC60K
DPAK FOOTPRINT
Packaging mechanical data
All dimensions are in millimeters
TAPE MECHANICAL DATA mm inch
DIM.
MIN.
MAX.
MIN.
MAX.
P1
P2
R
W
A0
B0
B1
D
D1
E
6.8
7 0.267 0.275
10.4
10.6
0.409 0.417
1.5
1.5
12.1
1.6
0.476
0.059 0.063
0.059
1.65
1.85
0.065 0.073
F 7.4
7.6
0.291 0.299
K0
P0
2.55
2.75
0.100 0.108
4.1
0.153 0.161
7.9
1.9
8.1
0.311
0.319
2.1
0.075 0.082
40 1.574
15.7
16.3
0.618
0.641
TAPE AND REEL SHIPMENT
G
N
T
A
B
C
D
REEL MECHANICAL DATA mm inch
DIM.
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0.795
16.4
18.4
0.645
0.724
50 1.968
22.4
0.881
BASE QTY
2500
BULK QTY
2500
15/17
Revision history
Table 8.
Date
02-Oct-2007
Document revision history
Revision
1 First release
STGB8NC60K - STGD8NC60K - STGP8NC60K
Changes
Obsolete Product(s) - Obsolete Product(s)
16/17
STGB8NC60K - STGD8NC60K - STGP8NC60K
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
Obsolete Product(s) - Obsolete Product(s)
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
17/17
