STD60NF06
N-channel 60V - 0.014
Ω
- 60A - DPAK
STripFET™ II Power MOSFET
General features
Type
STD60NF06
V
DSS
60V
R
DS(on)
<0.016
Ω
■
■
■
Exceptional dv/dt capability
Application oriented characterization
100% avalanche tested
I
D
60A
Description
This Power Mosfet series realized with
STMicroelectronics unique STripFET process has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency isolated DC-DC converters for Telecom and Computer application. It is also intended for any application with low gate charge drive requirements.
Applications
■ Switching application
DPAK
1
3
Internal schematic diagram
Order codes
Part number
STD60NF06T4
Marking
D60NF06
Package
DPAK
Packaging
Tape & reel
July 2006 Rev 2 1/13 www.st.com
13
5
6
3
4
1
2
Contents
Contents
STD60NF06
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2/13
STD60NF06 Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Parameter
I
V
DS
V
DGR
V
GS
I
D
I
P
D
DM
(1) tot
Drain-source voltage (V
GS
Drain-gate voltage (R
GS
Gate- source voltage
= 0)
= 20 k Ω )
Drain current (continuous) at T
C
= 25°C
Drain current (continuous) at T
C
= 100°C
Drain current (pulsed)
Total dissipation at T
C
= 25°C
Derating Factor dv/dt
(2)
Peak diode recovery avalanche energy
T stg
T j
Storage temperature
Max. operating junction temperature
1.
Pulse width limited by safe operating area.
2.
I
SD
≤
60A, di/dt
≤
200A/µs, V
DD
≤ j
≤
JMAX
Table 2.
Thermal data
Rthj-case Thermal resistance junction-case max
Rthj-amb Thermal resistance junction-to ambient max
T
J
Maximum lead temperature for soldering purpose
Value
60
60
± 20
60
42
240
110
0.73
4
-55 to 175
1.36
100
275
Unit
A
W
A
A
V
V
V
W/°C
V/ns
°C
°C/W
°C/W
°C
Table 3.
Symbol
I
AR
E
AS
Avalanche characteristics
Parameter
Avalanche Current, Repetitive Or Notrepetitive
(pulse width limited by T j
max)
Single pulse avalanche energy
(starting T j
= 25 °C, I
D
= I
AR
, V
DD
= 30 V)
Max value
30
350
Unit
A mJ
3/13
Electrical characteristics STD60NF06
(T
CASE
=25°C unless otherwise specified)
Table 4.
Symbol
On/off states
Parameter
V
(BR)DSS
Drain-source breakdown voltage
I
DSS
I
GSS
V
GS(th)
R
DS(on)
Zero gate voltage drain current (V
GS
= 0)
Gate-body leakage current (V
DS
= 0)
Gate threshold voltage
Static drain-source on resistance
Test conditions
I
D
= 250µA, V
GS
=0
V
DS
= Max rating
V
DS
= Max rating,
T
C
= 175°C
V
GS
= ± 20V
V
DS
= V
GS
, I
D
= 250µA
V
GS
= 10V, I
D
= 30A
Min.
60
2
Typ.
Max.
Unit
V
1
10
±100
4
0.014
0.016
µA
µA nA
V
Ω
Table 5.
Symbol
Dynamic
Parameter Test conditions g fs
C
C
C
(1) iss oss rss
Forward transconductance
Input capacitance
Output capacitance
Reverse transfer capacitance
V
V
V
DS
DS
GS
= 15V, I
= 25V, f = 1MHz,
= 0
D
= 30A t d(on) t r t d(off) t f
Turn-on delay time
Rise time
Turn-off delay time
Fall time
V
DD
R
G
= 30V, I
D
= 30A
= 4.7
Ω V
GS
= 10V
(see Figure 12
)
Q g
Q gs
Q gd
Total gate charge
Gate-source charge
Gate-drain charge
V
V
DD
GS
= 48V, I
= 10V
(see
1.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.
D
= 60A,
Figure 13
)
Min.
Typ.
Max.
Unit
20 S
1810
360
125
16
108
43
20
49
18
14
66 pF pF pF ns ns ns ns nC nC nC
4/13
STD60NF06 Electrical characteristics
Table 6.
Symbol
Source drain diode
Parameter Test conditions
I
SD
I
SDM
(1)
Source-drain current
Source-drain current
(pulsed)
V
SD
(2) t rr
Q rr
I
RRM
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
= 60A, V
GS
= 0
I
SD
= 60A, di/dt = 100A/µs,
V
DD
= 25V, T j
= 150°C
(see
Figure 14 )
1.
Pulse width limited by safe operating area.
2.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %
Min.
Typ.
Max.
Unit
73
182
5
60
240
1.3
A
A
V ns nC
A
5/13
Electrical characteristics
Figure 1.
Safe operating area Figure 2.
Thermal impedance
STD60NF06
Figure 3.
Output characterisics Figure 4.
Transfer characteristics
Figure 5.
Transconductance Figure 6.
Static drain-source on resistance
6/13
STD60NF06 Electrical characteristics
Figure 7.
Gate charge vs gate-source voltage Figure 8.
Capacitance variations
Figure 9.
Normalized gate threshold voltage vs temperature
Figure 10. Normalized on resistance vs temperature
Figure 11. Source-drain diode forward characteristics
7/13
Test circuit
3 Test circuit
Figure 12. Switching times test circuit for resistive load
Figure 13. Gate charge test circuit
STD60NF06
Figure 14. Test circuit for inductive load switching and diode recovery times
Figure 15. Unclamped Inductive load test circuit
Figure 16. Unclamped inductive waveform Figure 17. Switching time waveform
8/13
STD60NF06
4 Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
9/13
Package mechanical data STD60NF06
DIM.
D1
E
E1 e e1
H b4
C
C2
D
A
A1
A2
B
L
(L1)
L2
L4
R
V2
4.4
9.35
1
0.6
0°
MIN.
2.2
0.9
0.03
0.64
5.2
0.45
0.48
6
6.4
DPAK MECHANICAL DATA
mm.
TYP
5.1
4.7
2.28
MAX.
2.4
1.1
0.23
0.9
5.4
0.6
0.6
6.2
6.6
MIN.
0.086
0.035
0.001
0.025
0.204
0.017
0.019
0.236
0.252
4.6
10.1
0.173
0.368
0.039
2.8
0.8
0.2
1
8°
0.023
0° inch
TYP.
0.200
0.185
0.090
0.110
0.031
0.008
MAX.
0.094
0.043
0.009
0.035
0.212
0.023
0.023
0.244
0.260
0.181
0.397
0.039
8°
0068772-F
10/13
STD60NF06
5 Packing mechanical data
DPAK FOOTPRINT
Packing mechanical data
All dimensions are in millimeters
TAPE MECHANICAL DATA mm inch
DIM.
MIN.
MAX.
MIN.
MAX.
D1
E
F
K0
A0
B0
B1
D
P0
P1
P2
R
W
6.8
7 0.267 0.275
10.4
10.6
0.409 0.417
1.5
1.5
12.1
1.6
0.476
0.059 0.063
0.059
1.65
1.85
0.065 0.073
7.4
7.6
0.291 0.299
2.55
2.75
0.100 0.108
3.9
7.9
4.1
8.1
0.153 0.161
0.311
0.319
1.9
40
2.1
0.075 0.082
1.574
15.7
16.3
0.618
0.641
TAPE AND REEL SHIPMENT
G
N
T
A
B
C
D
REEL MECHANICAL DATA mm inch
DIM.
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0.795
16.4
18.4
0.645
0.724
50 1.968
22.4
0.881
BASE QTY
2500
BULK QTY
2500
11/13
Revision history
Table 7.
Date
Revision history
Revision
21-Jun-2004
13-Jul-2006
1
2
Changes
Preliminary document
New template, no content change
STD60NF06
12/13
STD60NF06
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
13/13
