STC20DE90HP
Hybrid emitter switched bipolar transistor
ESBT
®
900 V - 20 A - 0.06 W
Preliminary Data
General features
Table 1.
General features
V
CS(ON)
I
C
1.2 V 20 A
R
CS(ON)
0.06 Ω
■
■
■
■
■
Low equivalent on resistance
Very fast-switch, up to 150 kHz
Squared RBSOA, up to 900 V
Very low C
ISS driven by R
G
= 47 Ω
In compliance with the 2002/93/EC European
Directive
Description
The STC20DE90HP is manufactured in a hybrid structure, using dedicated high voltage Bipolar and low voltage MOSFET technologies, aimed to providing the best performance in ESBT topology.
The STC20DE90HP is designed for use in power supply forward converter and three-phase power factor corrector applications.
Applications
■
■
SMPS forward converter
Three-phase power factor corrector
TO247-4L HP
Internal schematic diagrams
Obsolete Product(s) - Obsolete Product(s)
Order codes
Part Number Marking Package Packing
STC20DE90HP C20DE90HP TO247-4L HP Tube
October 2006 Rev 1
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
1/11 www.st.com
11
3
4
STC20DE90HP
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Obsolete Product(s) - Obsolete Product(s)
2/11
STC20DE90HP
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Parameter
V
CS(SS)
V
BS(OS)
V
SB(OS)
V
GS
I
C
I
CM
I
B
I
BM
P tot
T stg
T
J
Collector-source voltage (V
BS
=V
GS
=0V)
Base-source voltage (I
C
=0, V
GS
=0V)
Source-base voltage (I
C
=0, V
GS
=0V)
Gate-source voltage
Collector current
Collector peak current (t
P
< 5ms)
Base current
Base peak current (t
P
< 1ms)
Total dissipation at T c
≤ 25°C
Storage temperature
Max. operating junction temperature
Table 3.
Thermal data
Symbol Parameter
R thj-case
Thermal resistance junction-case max
Electrical ratings
Value
900
30
9
± 20
20
60
5
20
46
-40 to 150
150
Unit
A
A
A
A
V
V
V
V
W
°C
°C
Value
2.7
Unit
°C/W
Obsolete Product(s) - Obsolete Product(s)
3/11
Electrical characteristics STC20DE90HP
(T case
= 25°C unless otherwise specified)
Table 4.
Electrical characteristics
Symbol Parameter Test Conditions Min.
Typ. Max. Unit
I
CS(SS)
I
BS(OS)
I
SB(OS)
I
GS(OS)
V
CS(ON) h
FE
V
BS(ON)
Collector-source current
(V
BS
=V
GS
=0V)
V
CS(SS)
=900V
Base-source current
(I
C
=0, V
GS
=0V)
V
BS(OS)
=30V
Source-base current
(I
C
=0, V
GS
=0V)
Gate-source leakage
(V
BS
=0V)
V
SB(OS)
V
GS
=9V
= ± 20V
Collector-source ON voltage
DC current gain
V
GS
=10V I
C
=20A I
B
=4A
V
GS
=10V I
C
=10A I
B
=1A
V
CS
=1V V
GS
=10V I
C
=20A
V
CS
=1V V
GS
=10V I
C
=10A
Base-source ON voltage
V
GS
=10V I
C
=20A I
B
=4A
V
GS
=10V I
C
=10A I
B
=1A
Gate threshold voltage V
BS
=V
GS
I
B
=250 µ A 1.5
1.2
0.65
4
12
1.8
1.2
2.2
100 µ A
10
100 µ A
500 nA
3 V
GS(th)
C iss
Q
GS(tot) t s t f
Input capacitance
Gate-source Charge
INDUCTIVE LOAD
Storage time
Fall time
V
CS
=25V f =1MHz
V
GS
=V
CB
=0V
V
CS
=25V V
GS
=10V
V
CB
=0V I
C
=20A
V
GS
=10V R
G
=47 Ω
V
Clamp
=720V t p
=4 µ s
I
C
=10A I
B
=2A
750
12.5
775
7
INDUCTIVE LOAD
V
GS t s
Collector-source
510
Storage time V
Clamp
=720V t p
=4 µ s
I
C
=10A I
V
CC
=V
Clamp
=400V
B
=1A
5 t f Obsolete Product(s) - Obsolete Product(s) ns ns
V
GS
=10V R
G
=47 Ω
=10V I
C
=10A
V
CS(dyn) dynamic voltage 2.3
V
I
B
= 2A R
G
=47 Ω
(500ns) t peak
=500ns I
Bpeak
=10A pF nC ns ns
µ A
V
V
V
V
V
4/11
STC20DE90HP Electrical characteristics
Table 4.
Symbol
V
CS(dyn)
V
CSW
Electrical characteristics
Parameter Test Conditions Min.
Typ. Max. Unit
Collector-source dynamic voltage
(1 µ s)
V
CC
=V
Clamp
=400V
V
GS
=10V I
C
=10A
I
B
= 2A R
G
=47 Ω t peak
=500ns I
Bpeak
=10A
Maximum collectorsource voltage switched without snubber
R
G
=47 Ω h
FE
=5 I
C
=20A 900
1 V
V
Note (1) Pulsed duration = 300 µ s, duty cycle ≤ 1.5%
2.1 Electrical characteristics (curves)
Figure 1.
Output characteristics Figure 2.
Dynamic collector-source saturation voltage
Figure 3.
DC current gain Figure 4.
Gate threshold voltage vs temperature
Obsolete Product(s) - Obsolete Product(s)
5/11
Electrical characteristics STC20DE90HP
Figure 5.
Collector-source On voltage Figure 6.
Collector-source On voltage
Figure 7.
Base-source On voltage Figure 8.
Base-source On voltage
Figure 9.
Inductive load switching time Figure 10. Inductive load switching time
Obsolete Product(s) - Obsolete Product(s)
6/11
STC20DE90HP
Figure 11. Reverse biased safe operating area
Electrical characteristics
Obsolete Product(s) - Obsolete Product(s)
7/11
Package mechanical data STC20DE90HP
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
Obsolete Product(s) - Obsolete Product(s)
8/11
STC20DE90HP Package mechanical data
DIM.
L2
L3
øP
S
D1
E e e1
L
L1 b b1 b2 c
D
A
A1
A2
A3
MIN.
5.50
2.85
0.95
1.10
2.50
0.40
23.85
15.45
2.54
10.20
2.20
3.55
TO247-4LHP MECHANICAL DATA
24
21.50
15.60
5.08
2.50
18.50
3
5.50
mm.
TYP
5.65
3.15
1.92
3.18
1.10
MAX.
5.80
3.25
1.30
1.50
2.90
0.80
24.15
15.75
10.80
2.80
3.65
Obsolete Product(s) - Obsolete Product(s)
7908765A
9/11
Revision history
26 Table 5.
Date
10-Oct-2006
Revision history
Revision
1 First release.
Changes
STC20DE90HP
Obsolete Product(s) - Obsolete Product(s)
10/11
STC20DE90HP
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE
GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
11/11
