STMicroelectronics TSV6291A Datasheet
Publicité
Publicité
TSV6290, TSV6290A, TSV6291,
TSV6291A
Micropower with high merit factor CMOS operational amplifiers
Datasheet - production data
Features
Low supply voltage: 1.5 V – 5.5 V
Rail-to-rail input and output
Low input offset voltage: 800 µV max
(A version)
Low power consumption: 29 µA typical
Gain bandwidth product: 1.3 MHz typical
Stable when used in gain configuration
Micropackages: SOT23-5/6, SC70-5/6
Low input bias current: 1 pA typical
Extended temperature range: -40 to 125 °C
4 kV human body model
Applications
Battery-powered applications
Portable devices
Signal conditioning
Active filtering
Medical instrumentation
Description
The TSV6290 and the TSV6291 are single operational amplifiers with a high bandwidth which consume only 29 µA. They must be used in a gain configuration (G < -3, G > 4).
With a very low input bias current and low offset voltage (800 µV maximum for the A version), the
TSV629x family of devices is ideal for applications requiring precision. The devices can operate at a power supply ranging from 1.5 to
5.5 V, and therefore suit battery-powered devices, extending battery life.
The TSV6290 comes with a shutdown function.
The TSV6290 and TSV6291 present a high tolerance to ESD, sustaining 4 kV for the human body model.
The TSV6290 and TSV6291 are offered in
SOT23-5/6 and SC70-5/6 micropackages, with extended temperature ranges from -40 °C to
125 °C.
All these features make the TSV629x ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering.
August 2016 DocID17117 Rev 2
This is information on a product in full production.
1/24 www.st.com
Contents TSV6290, TSV6290A, TSV6291, TSV6291A
Contents
1 Package pin connections ................................................................ 3
2 Absolute maximum ratings and operating conditions ................. 4
3 Electrical characteristics ................................................................ 5
4 Electrical characteristic curves .................................................... 10
5 Application information ................................................................ 13
Operating voltages .......................................................................... 13
Rail-to-rail output ............................................................................. 13
Shutdown function (TSV6290) ........................................................ 14
Optimization of DC and AC parameters .......................................... 14
Driving resistive and capacitive loads ............................................. 15
PCB layouts .................................................................................... 15
Macromodel .................................................................................... 15
6 Package information ..................................................................... 16
SOT23-5 package information ........................................................ 17
SOT23-6 package information ........................................................ 18
SC70-5 (or SOT323-5) package information ................................... 19
SC70-6 (or SOT323-6) package information ................................... 20
7 Ordering information ..................................................................... 22
8 Revision history ............................................................................ 23
2/24 DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A
1 Package pin connections
Package pin connections
Figure 1: Package pin connections (top view)
DocID17117 Rev 2 3/24
Absolute maximum ratings and operating conditions
2
TSV6290, TSV6290A, TSV6291, TSV6291A
Absolute maximum ratings and operating conditions
Symbol
Table 1: Absolute maximum ratings (AMR)
Parameter
V
V
V
CC id in
Differential input voltage (2)
I in
SHDN
T stg
Storage temperature
(V
(V
CC-
CC-
Value
6
±V
CC
10
) - 0.2 to (V
) - 0.2 to (V
CC+
CC+
-65 to 150
) + 0.2
) + 0.2
T j
Maximum junction temperature
SOT23-5
150
250
Unit
V mA
V
°C
R thja
Thermal resistance junction-to-
SOT23-6 240
SC70-6 232
ESD
Latch-up immunity
4
300
1.5
200 kV
V kV mA
Notes:
(1)
All voltage values, except differential voltage, are with respect to network ground terminal.
(2)
Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
(3)
V cc
- V in
must not exceed 6 V, V in
must not exceed 6 V.
(4)
Input current must be limited by a resistor in series with the inputs.
(5)
R th
are typical values.
(6)
Short-circuits can cause excessive heating and destructive dissipation.
(7)
Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating.
(8)
Machine mode: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating.
(9)
Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground.
Symbol
SC70-5
Table 2: Operating conditions
Parameter
205
Value
°C/W
Unit
V
CC
V icm
T oper
Supply voltage
Common mode input voltage range
Operating free air temperature range
1.5 to 5.5
(V
CC-
) - 0.1 to (V
CC+
) + 0.1
-40 to 125
V
°C
4/24 DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A Electrical characteristics
3 Electrical characteristics
Symbol
DC performance
Table 3: Electrical characteristics at (VCC+) = 1.8 V with (VCC-) = 0 V, Vicm = VCC/2,
Tamb = 25 °C, and RL connected to VCC/2 (unless otherwise specified)
Parameter Conditions Min. Typ. Max. Unit
V io
DV io
Input offset voltage drift
I io
I ib
CMR
A vd
V
OH
V
OL
I out
I
CC
Offset voltage
Input offset current,
V out
= V
CC
Input bias current,
V out
= V
CC
Common mode rejection ratio, 20 log (ΔV ic
/ΔV io
)
Large signal voltage gain
High-level output voltage,
V
OH
= V
CC
- V out
Low-level output voltage
Isink
Isource
Supply current (per operator)
TSV6290, TSV6291
TSV6290A, TSV6291A
T min
< T op
< T max,
TSV6290, TSV6291
T min
< T op
< T max
, TSV6290A, TSV6291A
T min
< T op
< T max
T min
< T op
< T max
0 V to 1.8 V, V out
= 0.9 V
T min
< T op
< T max
R
L
= 10 kΩ, V out
= 0.5 V to 1.3 V
T min
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max
V οut = 1.8 V
T min
< T op
< T max
V οut = 0 V
T min
< T op
< T max
No load, V out
= V
CC
/2
T min
< T op
< T max
6
4
6
4
53
51
78
73
2
1
1
1
1
74
95
5
4
12
10
25 31
33
35
50
35
50
10
100
10
100
4
0.8
6
2 mV
μV/°C pA dB mV mA
µA
AC performance
GBP Gain bandwidth product MHz
Gain Minimum gain for stability
SR Slew rate
R
L
= 10 kΩ, C
L
= 100 pF
Phase margin = 60 °, R f
= 10 kΩ,
R
L
= 10 kΩ, C
L
= 20 pF
R
L
= 10 kΩ, C
L
= 100 pF,
Vout = 0.5 V to 1.3 V
1.1
4
-3
0.33
V/V
V/μs
Notes:
(1)
Guaranteed by design.
DocID17117 Rev 2 5/24
Electrical characteristics
Symbol Parameter
TSV6290, TSV6290A, TSV6291, TSV6291A
Table 4: Shutdown characteristics VCC = 1.8 V (TSV6290)
Conditions Min. Typ. Max. Unit
DC performance
I
CC t on t off
Supply current in shutdown mode (all operators)
Amplifier turn-on time
Amplifier turn-off time
SHDN
= (V
CC-
)
T min
< T op
< 85 °C
T min
< T op
< 125 °C
R
L
= 5 kΩ, V out
= (V
CC-
) to (V
CC-
) + 0.2 V
R
L
= 5 kΩ, V out
= (V
CC+
) - 0.5 to
(V
CC+
) - 0.7 V
1.3
2.5
300
30
50 nΑ
200
1.5 µA ns
V
IH
V
IL
I
IH
I
IL
I
OLeak
SHDN
logic high
SHDN
logic low
SHDN
current high
SHDN
current low
Output leakage in shutdown mode
SHDN
= (V
CC+
)
SHDN
= (V
CC-
)
SHDN
= (V
CC-
)
T min
< T op
< T max
10
10
50
1
0.5
V pA nA
6/24 DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A Electrical characteristics
Table 5: (VCC+) = 3.3 V, (VCC-) = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL connected to VCC/2
(unless otherwise specified)
Symbol Parameter Conditions Min. Typ. Max. Unit
DC performance
V io
Offset voltage
DV io
Input offset voltage drift
I io
TSV6290, TSV6291
TSV6290A, TSV6291A
T min
< T op
< T max,
TSV6290, TSV6291
T min
< T op
< T max
, TSV6290A, TSV6291A
T min
< T op
< T max
I
CMR
A
V
V
I
I ib vd
OH
OL out
CC
High-level output voltage,
V
OH
= V
CC
- V out
Common mode rejection ratio, 20 log (ΔV ic
/ΔV io
)
Large signal voltage gain
Low-level output voltage
Isink
Isource
Supply current (per operator)
T min
< T op
< T max
0 V to 3.3 V, V out
= 1.65 V
T min
< T op
< T max
R
L
= 10 kΩ, V out
= 0.5 V to 2.8 V
T min
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max
V out
= 5 V
T min
< T op
< T max
V out
= 0 V
T min
< T op
< T max
No load, V out
= 2.5 V
T min
< T op
< T max
AC performance
GBP Gain bandwidth product
Gain
SR
Minimum gain for stability
Slew rate
R
L
= 10 kΩ, C
L
= 100 pF
Phase margin = 60 °, R f
= 10 kΩ,
R
L
= 10 kΩ, C
L
= 20 pF
R
L
= 10 kΩ, C
L
= 100 pF,
V out
= 0.5 V to 2.8 V
23
20
23
20
1
1
1
79
2
1
57
53
81
76
98
5
4
45
38
26
1.2
4
-3
0.4
33
35
35
50
35
50
10
100
10
100
4
0.8
6
2 mV
μV/°C pA dB mV mA
µA
MHz
V/V
V/μs
Notes:
(1)
Guaranteed by design.
DocID17117 Rev 2 7/24
Electrical characteristics TSV6290, TSV6290A, TSV6291, TSV6291A
Table 6: (VCC+) = 5 V, (VCC-) = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL connected to VCC/2
(unless otherwise specified)
Symbol Parameter Min. Typ. Max. Unit
DC performance
V io
DV io
Input offset voltage drift
I io
I ib
CMR
SVR
A vd
V
OH
V
OL
I out
I
CC
Offset voltage
Common mode rejection ratio, 20 log (ΔV ic
/ΔV io
)
Supply voltage rejection ratio, 20 log (ΔV
CC
/ΔV io
)
Large signal voltage gain
High-level output voltage,
V
OH
= V
CC
- V out
Low-level output voltage
I sink
I source
Supply current
(per operator)
TSV6290, TSV6291
TSV6290A, TSV6291A
T min
< T op
< T max,
TSV6290, TSV6291
T min
< T op
< T max
, TSV6290A, TSV6291A
T min
< T op
< T max
T min
< T op
< T max
0 V to 5 V, V out
= 2.5 V
T min
< T op
< T max
V
CC
= 1.8 to 5 V
T min
< T op
< T max
R
L
= 10 kΩ, V out
= 0.5 V to 4.5 V
T min
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max
V out
= 5 V
T min
< T op
< T max
V out
= 0 V
T min
< T op
< T max
No load, V out
= 2.5 V
T min
< T op
< T max
2
1
1
1
1
60 80
55
75 102
73
85 98
80
7
6
40 69
35
40 74
35
30 36
38
35
50
35
50
10
100
10
100
4
0.8
6
2 mV
μV/°C pA dB mV mA
µA
AC performance
GBP Gain bandwidth product MHz
Gain Minimum gain for stability
SR Slew rate
R
L
= 10 kΩ, C
L
= 100 pF
Phase margin = 60 °, R f
= 10 kΩ,
R
L
= 10 kΩ, C
L
= 20 pF
R
L
= 10 kΩ, C
L
= 100 pF,
V out
= 0.5 V to 4.5 V
1.3
4
-3
0.5
V/V
V/μs e n
Equivalent input noise voltage f = 1 kHz 70 nV/√Hz
THD Total harmonic distortion
Av = -10, f in
= 1 kHz, R
L
= 100 kΩ,
V icm
= Vcc/2, V in
= 40 mVpp
0.15 %
Notes:
(1)
Guaranteed by design.
8/24 DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A
Symbol
Electrical characteristics
Parameter
Table 7: Shutdown characteristics VCC = 5 V (TSV6290)
Conditions Min. Typ. Max. Unit
DC performance
I
CC t on t off
Supply current in shutdown mode (all operators)
Amplifier turn-on time
Amplifier turn-off time
SHDN
= V
IL
T min
< T op
< 85 °C
T min
< T op
< 125 °C
R
L
=
5 kΩ , V out
= (V
CC-
) to (V
CC-
) + 0.2 V
R
L
= 5 kΩ, V out
= (V
CC+
) - 0.5 V to
(V
CC+
) - 0.7 V
4.5
5
300
30
50 nΑ
200
1.5 µA ns
V
IH
V
IL
I
IH
I
IL
I
OLeak
SHDN
logic high
SHDN
logic low
SHDN
current high
SHDN
current low
Output leakage in shutdown mode
SHDN
= (V
CC+
)
SHDN
= (V
CC-
)
SHDN
= (V
CC-
)
T min
< T op
< T max
10
10
50
1
0.5
V pA nA
DocID17117 Rev 2 9/24
Electrical characteristic curves TSV6290, TSV6290A, TSV6291, TSV6291A
4 Electrical characteristic curves
Figure 2: Supply current vs. supply voltage at
Vicm = VCC/2
Figure 3: Output current vs. output voltage at
VCC = 1.5 V
Figure 4: Output current vs. output voltage at VCC = 5 V Figure 5: Peaking at closed loop gain = -10 at
VCC = 1.5 V and VCC = 5 V
Figure 6: Peaking at closed loop gain = -3, VCC = 1.5 V Figure 7: Peaking at closed loop gain = -3, VCC = 5 V
10/24 DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A
Figure 8: Positive slew rate vs. supply voltage in closed loop
Electrical characteristic curves
Figure 9: Negative slew rate vs. supply voltage in closed loop
Figure 10: Slew rate vs. supply voltage in open loop Figure 11: Slew rate timing in open loop
Figure 12: Slew rate timing in closed loop Figure 13: Noise at VCC = 5 V
DocID17117 Rev 2 11/24
Electrical characteristic curves
Figure 14: Distortion + noise vs. output voltage at
VCC = 1.8 V
TSV6290, TSV6290A, TSV6291, TSV6291A
Figure 15: Distortion + noise vs. output voltage at
VCC = 5 V
Figure 16: Distortion + noise vs. frequency at
VCC = 1.8 V
Figure 17: Distortion + noise vs. frequency at
VCC = 5 V
12/24 DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A Application information
5 Application information
5.1 Operating voltages
The TSV6290 and TSV6291 can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8, 3.3 and 5 V power supplies. However, the parameters are very stable in the full V
CC
range and several characterization curves show the TSV629x characteristics at
1.5 V. Additionally, the main specifications are guaranteed in extended temperature ranges from -40 °C to 125 °C.
5.2 Rail-to-rail input
The TSV6290 and TSV6291 are built with two complementary PMOS and NMOS input differential pairs. The devices have a rail-to-rail input, and the input common-mode range is extended from (V
CC-
) - 0.1 V to (V
CC+
) + 0.1 V. The transition between the two pairs appears at (V
CC+
) - 0.7 V. In the transition region, the performance of CMR, SVR, V io
and THD is
slightly degraded (as shown in Figure 18 and Figure 19 for V
io
vs. V icm
).
Figure 18: Input offset voltage vs. input common mode at VCC = 1.5 V
Figure 19: Input offset voltage vs. input common mode at VCC = 5 V
5.3
The devices are guaranteed without phase reversal.
Rail-to-rail output
The operational amplifiers’ output levels can go close to the rails: 35 mV maximum above and below the rail when connected to a 10 kΩ resistive load to V
CC
/2.
DocID17117 Rev 2 13/24
Application information TSV6290, TSV6290A, TSV6291, TSV6291A
5.4 Shutdown function (TSV6290)
The operational amplifier is enabled when the
SHDN
pin is pulled high. To disable the amplifier, the
SHDN
must be pulled down to V
CC-
. When in shutdown mode, the amplifier’s output is in a high impedance state. The
SHDN
pin must never be left floating, but tied to
(V
CC+
) or (V
CC-
).
Figure 20: Test configuration for turn-on time
(Vout pulled down)
Figure 21: Test configuration for turn-off time
(Vout pulled down)
Figure 22: Turn-on time, VCC = 5 V, Vout pulled down,
T = 25 °C
Figure 23: Turn-off time, VCC= 5 V, Vout pulled down,
T = 25 °C
25°
5.5
14/24
µ
Optimization of DC and AC parameters
These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (29 µA typical, min/max at ±17 %). Parameters linked to the current consumption value, such as GBP, SR and A vd
, benefit from this narrow dispersion.
DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A
5.6
Application information
Driving resistive and capacitive loads
These products are micropower, low-voltage operational amplifiers optimized to drive rather large resistive loads, above 5 kΩ. For lower resistive loads, the THD level may significantly increase.
The amplifiers have a relatively low internal compensation capacitor, making them very fast while consuming very little. They are ideal when used in a non-inverting configuration or in an inverting configuration in the following conditions.
IGainI ≥ 3 in an inverting configuration (C
ΙgainI ≥ 10 (C
L
= 100 pF, R
L
= 100 kΩ)
L
= 20 pF, R
L
= 100 kΩ) οr
Gain ≥ 4 in a non-inverting configuration (C
L gain ≥ 11 (C
L
= 100 pF, R
L
= 100 kΩ)
= 20 pF, R
L
= 100 kΩ) οr
As these operational amplifiers are not unity gain stable, for a low closed-loop gain it is recommended to use the TSV62x (29 µA, 420 kHz) or TSV63x (60 µA, 880 kHz) which are unity gain stable.
Table 8: Related products
Part # Icc (µA) at 5 V GBP (MHz) SR (V/µs)
Minimum gain for stability
(C
Load
= 100 pF)
TSV620-1
TSV6290-1
TSV630-1
TSV6390-1
29
29
60
60
0.42
1.3
0.88
2.4
0.14
0.5
0.34
1.1
1
11
1
11
5.7
5.8
PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins.
Macromodel
An accurate macromodel of the TSV6290 and TSV6291 is available on STMicroelectronics’ web site at www.st.com
. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV629x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It helps to validate a design approach and to select the right operational amplifier, but it does not replace on-board measurements .
DocID17117 Rev 2 15/24
Package information
6 Package information
TSV6290, TSV6290A, TSV6291, TSV6291A
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK ® is an ST trademark.
16/24 DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A
6.1 SOT23-5 package information
Figure 24: SOT23-5 package outline
Package information
D1 e
E
F
L
K
A
A1
A2
B
C
D
Ref.
Min.
0.90
0.90
0.35
0.09
2.80
2.60
1.50
0.10
0 degrees
1.05
0.40
0.15
2.90
1.90
0.95
2.80
1.60
0.35
Table 9: SOT23-5 mechanical data
Dimensions
Millimeters
Typ.
1.20
Min.
0.035
Max.
1.45
0.15
1.30
0.50
0.20
3.00
0.035
0.014
0.004
0.110
3.00
1.75
0.60
10 degrees
0.102
0.059
0.004
0 degrees
Inches
Typ.
0.047
0.041
0.016
0.006
0.114
0.075
0.037
0.110
0.063
0.014
Max.
0.057
0.006
0.051
0.020
0.008
0.118
0.118
0.069
0.024
10 degrees
DocID17117 Rev 2 17/24
Package information
6.2 SOT23-6 package information
TSV6290, TSV6290A, TSV6291, TSV6291A
Figure 25: SOT23-6 package outline
18/24
Ref.
D
E e
H
L
θ
A
A1
A2 b c
Min.
0.90
0.90
0.35
0.09
2.80
1.50
2.60
0.10
0 °
Table 10: SOT23-6 mechanical data
Dimensions
Millimeters
Typ. Min.
0.035
0.95
Max.
1.45
0.10
1.30
0.50
0.20
3.05
1.75
3.00
0.60
10 °
0.035
0.013
0.003
0.110
0.060
0.102
0.004
0 °
Inches
Typ.
0.037
Max.
0.057
0.004
0.051
0.019
0.008
0.120
0.069
0.118
0.024
10 °
DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A
6.3 SC70-5 (or SOT323-5) package information
Figure 26: SC70-5 (or SOT323-5) package outline
SIDE VIEW
DIMENSIONS IN MM
Package information
GAUGE PLANE
COPLANAR LEADS
SEATING PLANE
Ref. c
D
E
A
A1
A2 b
E1 e e1
L
<
TOP VIEW
0.80
0.15
0.10
1.80
1.80
1.15
Min.
0.80
0.26
0°
Table 11: SC70-5 (or SOT323-5) mechanical data
Dimensions
Millimeters
Typ. Min.
0.032
Inches
Typ.
0.90
2.00
2.10
1.25
0.65
1.30
0.36
Max.
1.10
0.10
1.00
0.30
0.22
2.20
2.40
1.35
0.46
8°
0.032
0.006
0.004
0.071
0.071
0.045
0.010
0°
0.035
0.079
0.083
0.049
0.025
0.051
0.014
DocID17117 Rev 2
Max.
0.043
0.004
0.039
0.012
0.009
0.087
0.094
0.053
0.018
8°
19/24
Package information
6.4
TSV6290, TSV6290A, TSV6291, TSV6291A
SC70-6 (or SOT323-6) package information
Figure 27: SC70-6 (or SOT323-6) package outline
20/24
Ref e
HE
L
Q1
A
A1
A2 b c
D
E
Min.
0.80
0.80
0.15
0.10
1.80
1.15
1.80
0.10
0.10
Table 12: SC70-6 (or SOT323-6) mechanical data
Dimensions
Millimeters
Typ. Min.
0.031
0.65
Max.
1.10
0.10
1.00
0.30
0.18
2.20
1.35
0.031
0.006
0.004
0.071
0.045
Inches
Typ.
0.026
2.40
0.40
0.40
0.071
0.004
0.004
Max.
0.043
0.004
0.039
0.012
0.007
0.086
0.053
0.094
0.016
0.016
DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A Package information
Figure 28: SC70-6 (or SOT323-6) recommended footprint
DocID17117 Rev 2 21/24
Ordering information
7 Ordering information
Part number
TSV6290ILT
TSV6290ICT
TSV6290AILT
TSV6290AICT
TSV6291ILT
TSV6291ICT
TSV6291AILT
TSV6291AICT
TSV6290, TSV6290A, TSV6291, TSV6291A
Table 13: Order codes
Temperature range Package
-40 °C to 125 °C
SΟΤ23-6
SC70-6
SΟΤ23-6
SC70-6
SΟΤ23-5
SC70-5
SΟΤ23-5
SC70-5
Packing
Tape and reel
Marking
K106
K16
K139
K39
K107
K14
K113
K15
22/24 DocID17117 Rev 2
TSV6290, TSV6290A, TSV6291, TSV6291A
8
Revision history
Revision history
Date Revision
Table 14: Document revision history
Changes
04-Mar-2010
10-Aug-2016
1
2
Initial release.
Updated datasheet layout
OH
“min.” values changed to “max.” values.
Figure 8 , Figure 9 , Figure 10 : updated Y-axes
Table 11 : updated A and A2 min. values in inches
DocID17117 Rev 2 23/24
TSV6290, TSV6290A, TSV6291, TSV6291A
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics
– All rights reserved
24/24 DocID17117 Rev 2
Télécharger
Lien public mis à jour
Le lien public vers votre chat a été mis à jour. Vous pouvez afficher et gérer vos liens de chat après inscription ici.
Lien public du document
Publicité