STMicroelectronics TSV6390A Datasheet
Advertisement
Advertisement
TSV6390, TSV6390A, TSV6391,
TSV6391A
Micropower (60 µA), wide bandwidth (2.4 MHz) CMOS operational amplifiers
Datasheet - production data
Features
Low offset voltage: 500 µV max (A version)
Low power consumption: 60 µA typ at 5 V
Low supply voltage: 1.5 V
– 5.5 V
Gain bandwidth product: 2.4 MHz typical
Stable in gain configuration (-3 or 4)
Low power shutdown mode: 5 nA typical
High output current: 63 mA at V
CC
= 5 V
Low input bias current: 1 pA typical
Rail-to-rail input and output
Extended temperature range:
-40 °C to 125 °C
4 kV human body model
Applications
Battery-powered applications
Portable devices
Signal conditioning
Active filtering
Medical instrumentation
Description
The TSV6390, TSV6391, and their "A" versions are single operational amplifiers (op amps) offering low voltage, low power operation, and rail-to-rail input and output.
With a very low input bias current and low offset voltage (500 µV maximum for the A version), the
TSV6390 and TSV6391 are ideal for applications requiring precision. The devices can operate at power supplies ranging from 1.5 to 5.5 V, and are therefore ideal for battery-powered devices, extending battery life.
When used with a gain (above -3 or 4), these products feature an excellent speed/power consumption ratio, offering a 2.4 MHz gain bandwidth product while consuming only 60 µA at a 5 V supply voltage.
The TSV6390 comes with a shutdown function.
Both the TSV6390 and TSV6391 have a high tolerance to ESD, sustaining 4 kV for the human body model.
They are offered in micropackages, SC70-6 and
SOT23-6 for the TSV6390 and SC70-5 and
SOT23-5 for the TSV6391. They are guaranteed for industrial temperature ranges from -40 °C to
125 °C.
All these features combined make the TSV6390 and TSV6391 ideal for sensor interfaces, batterysupplied, and portable applications, as well as active filtering.
December 2015 DocID17118 Rev 2
This is information on a product in full production.
1/22
www.st.com
Contents TSV6390, TSV6390A, TSV6391, TSV6391A
Contents
1 Absolute maximum ratings and operating conditions ................. 3
2 Electrical characteristics ................................................................ 4
3 Electrical characteristics curves .................................................... 9
4 Application information ................................................................ 11
Operating voltages .......................................................................... 11
Rail-to-rail output ............................................................................. 11
Shutdown function (TSV6390) ........................................................ 12
Optimization of DC and AC parameters .......................................... 13
Driving resistive and capacitive loads ............................................. 13
PCB layouts .................................................................................... 13
Macromodel .................................................................................... 13
5 Package information ..................................................................... 14
SC70-6 (or SOT323-6) package information ................................... 15
SOT23-6 package information ........................................................ 17
SC70-5 (or SOT323-5) package information ................................... 18
SOT23-5 package information ........................................................ 19
6 Ordering information ..................................................................... 20
7 Revision history ............................................................................ 21
2/22 DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
1
Absolute maximum ratings and operating conditions
Absolute maximum ratings and operating conditions
Table 1: Absolute maximum ratings (AMR)
Symbol Parameter
V
V
CC id
V in
I in
SHDN
T stg
Storage temperature
T j
Maximum junction temperature
SC70-6
SOT23-6
(V
CC-
Value
) - 0.2 to (V
150
232
240
CC+
-65 to 150
) + 0.2
R thja
Thermal resistance junction to
6
±V
CC
(V
CC-
) - 0.2 to (V
CC+
) + 0.2
10
SC70-5
SOT23-5
205
250
ESD
4
300
1.5
200 Latch-up immunity
Unit
V mA
V
°C
°C/W kV
V kV mA
Notes:
(1)
All voltage values, except the differential voltage, are with respect to network ground terminal.
(2)
The differential voltage is the non-inverting input terminal with respect to the inverting input terminal.
(3)
V
CC
- V in
must not exceed 6 V, V in
must not exceed 6 V.
(4)
Input current must be limited by a resistor in series with the inputs.
(5)
R th
are typical values.
(6)
Short-circuits can cause excessive heating and destructive dissipation.
(7)
Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin combinations with other pins floating.
(8)
Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5
Ω), done for all couples of pin combinations with other pins floating.
(9)
Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground.
Symbol
Table 2: Operating conditions
Parameter Value Unit
V
CC
V icm
T oper
Supply voltage
Common mode input voltage range
Operating free air temperature range
1.5 to 5.5
(V
CC-
) - 0.1 to (V
CC+
) + 0.1
-40 to 125
V
°C
DocID17118 Rev 2 3/22
Electrical characteristics
TSV6390, TSV6390A, TSV6391, TSV6391A
2 Electrical characteristics
Table 3: Electrical characteristics at VCC+ = 1.8 V with VCC- = 0 V, Vicm = VCC/2,
Tamb = 25 °C and RL connected to VCC/2 (unless otherwise specified)
Parameter Conditions Min. Typ. Max. Unit Symbol
DC performance
TSV6390 and TSV6391
TSV6390A and TSV6391A
V io
Offset voltage
T min
< T op
< T max,
TSV6390 and TSV6391
T min
< T op
< T max,
TSV6390A and TSV6391A
ΔV io
/ΔT Input offset voltage drift
I io
Input offset current, V out
= V
CC
T min
< T op
< T max
I
CMR
A
V
V
I
I ib vd
OH
OL out
CC
I
I
Input bias current, (V out
= V
CC
T min
< T op
< T max
Common mode rejection ratio
20 log (ΔV ic
/ΔV io
)
0 V to 1.8 V, V out
= 0.9 V
Large signal voltage gain
T min
< T op
< T max
R
L
= 10 kΩ, V out
= 0.5 V to 1.3 V
T min
< T op
< T max
R
L
= 10 kΩ
High-level output voltage
Low-level output voltage
T min
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max sink source
Supply current,
SHDN = V
CC
V out
= 1.8 V
T min
< T op
< T max
V out
= 0 V
T min
< T op
< T max
No load, V out
= V
CC
/2
T min
< T op
< T max
AC performance
GBP
Gain
SR e n
Gain bandwidth product
Minimum gain for stability
Slew rate
Equivalent input noise voltage
R
L
= 10 kΩ, C
L
= 100 pF
Phase margin = 60°, R f
= 10 kΩ,
R
L
= 10 kΩ, C
L
= 20 pF
R
L
= 10 kΩ, C
L
= 100 pF,
V out
= 0.5 V to 1.3 V f = 1 kHz f = 10 kHz
2
1
1
1
1
53 74
51
85 95
80
5
4
6 12
4
6 10
4
40 50
2
4
-3
0.7
60
33
3
0.5
4.5
2
35
50
35
50
60
62
10
100
10
100 mV
μV/°C pA dB mV mA
µA
MHz
V/V
V/μs nV/√Hz
Notes:
(1)
Guaranteed by design.
4/22 DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
Symbol
Electrical characteristics
Parameter
Table 4: Shutdown characteristics VCC = 1.8 V (TSV6390)
Conditions Min. Typ. Max. Unit
DC performance
I
CC t on t off
V
IH
V
IL
I
IH
I
IL
I
OLeak
Supply current in shutdown mode (all operators)
Amplifier turn-on time
Amplifier turn-off time
SHDN logic high
SHDN logic low
SHDN current high
SHDN current low
Output leakage in shutdown mode
SHDN = V
CC-
T min
< T op
< 85 °C
T min
< T op
< 125 °C
R
L
= 2 kΩ, V out
= (V
CC-
) to (V
CC-
) + 0.2 V
R
L
= 2 kΩ, Vout = (V
CC+
) - 0.5 V to
(V
CC+
) - 0.7 V
SHDN = V
CC+
SHDN = V
CC-
SHDN = V
CC-
T min
< T op
< T max
1.3
10
10
50
1
2.5 50 nΑ
200
1.5 µA
300 ns
20
0.5
V pA nA
DocID17118 Rev 2 5/22
Electrical characteristics
TSV6390, TSV6390A, TSV6391, TSV6391A
Table 5: VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, Tamb = 25 °C, RL connected to VCC/2
(unless otherwise specified)
Symbol Parameter Conditions Min. Typ. Max. Unit
DC performance
V io
Offset voltage
TSV6390 and TSV6391
TSV6390A and TSV6391A
T min
< T op
< T max,
TSV6390 and TSV6391
T min
< T op
< T max,
TSV6390A and TSV6391A
3
0.5
4.5
2 mV
ΔV io
/ΔT Input offset voltage drift
I io
T min
< T op
< T max
I ib
CMR
A
V
V
I
I vd
OH
OL out
CC
I
I
Common mode rejection ratio
20 log (ΔV ic sink source
/ΔV io
)
Large signal voltage gain
High-level output voltage
Low-level output voltage
Supply current,
SHDN = V
CC
T min
< T op
< T max
0 V to 3.3 V, V out
= 1.65 V
T min
< T op
< T max
R
L
= 10 kΩ, V out
= 0.5 V to 2.8 V
T min
< T op
< T max
R
L
= 10 kΩ
T min.
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max
V out
= 3.3 V
T min
< T op
< T max
V out
= 0 V
T min
< T op
< T max
No load, V out
= V
CC
/2
T min
< T op
< T max
AC performance
GBP
Gain
SR e n
Gain bandwidth product
Minimum gain for stability
R
L
= 10 kΩ, C
L
= 100 pF
Phase margin = 60°, R f
= 10 kΩ,
R
L
= 10 kΩ, C
L
= 20 pF,
Slew rate
R
L
= 10 kΩ, C
L
= 100 pF,
V out
= 0.5 V to 2.8 V
Equivalent input noise voltage f = 1 kHz
2
1
1
1
1
57 79
53
88 98
83
6
7
23 45
20 42
23 38
20
43 55
2.2
4
-3
0.9
65
64
66
35
50
35
50
10
100
10
100
μV/°C pA dB mV mA
µA
MHz
V/V
V/μs nV/√Hz
Notes:
(1)
Guaranteed by design.
6/22 DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
Electrical characteristics
Table 6: Electrical characteristics at VCC+ = 5 V with VCC- = 0 V, Vicm = VCC/2, Tamb = 25 °C and RL connected to VCC/2 (unless otherwise specified)
Symbol Parameter Conditions Min. Typ. Max. Unit
DC performance
TSV6390 and TSV6391
TSV6390A and TSV6391A
V io
Offset voltage
T min
< T op
< T max,
TSV6390 and TSV6391
T min
< T op
< T max
,
TSV6390A and TSV6391A
ΔV io
/ΔT Input offset voltage drift
I io
Input offset current, V out
= V
CC
T min
< T op
< T max
I ib
CMR
SVR
A vd
V
OH
V
OL
I out
I
CC
Input bias current, V out
= V
CC
Common mode rejection ratio
20 log (ΔV ic
/ΔV io
)
Supply voltage rejection ratio
20 log (ΔV
CC
/ΔV io
)
Large signal voltage gain
High-level output voltage
Low-level output voltage
I sink
I source
Supply current,
SHDN = V
CC
T min
< T op
< T max
0 V to 5 V, V out
= 2.5 V
T min
< T op
< T max
V
CC
= 1.8 to 5 V
T min
< T op
< T max
R
L
= 10 kΩ, V out
= 0.5 V to 4.5 V
T min
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max
R
L
= 10 kΩ
T min
< T op
< T max
V out
= 5 V
T min
< T op
< T max
V out
= 0 V
T min
< T op
< T max
No load, V out
= V
CC
/2
T min
< T op
< T max
2
1
1
1
1
60 80
55
75 93
73
89 98
84
7
6
40 65
35
40 72
35
50 60
3
0.5
4.5
2
69
72
35
50
35
50
10
100
10
100 mV
μV/°C pA dB mV mA
µA
AC performance
GBP Gain bandwidth product MHz
Gain Minimum gain for stability
SR e n
Slew rate
Equivalent input noise voltage
THD+N Total harmonic distortion + noise
R
L
= 10 kΩ, C
L
= 100 pF
Phase margin = 60°, R f
= 10 kΩ,
R
L
= 10 kΩ, C
L
= 20 pF,
R
L
= 10 kΩ, C
L
= 100 pF f = 1 kHz f = 10 kHz
Av = -10, f in
= 1 kHz, R = 100 kΩ,
V icm
= Vcc/2, V in
= 40 mVpp
2.4
4
-3
1.1
60
33
0.11
V/V
V/μs nV/√Hz
%
Notes:
(1)
Guaranteed by design.
DocID17118 Rev 2 7/22
Electrical characteristics
Symbol
TSV6390, TSV6390A, TSV6391, TSV6391A
Parameter
Table 7: Shutdown characteristics VCC = 5 V (TSV6390)
Conditions Min. Typ. Max. Unit
DC performance
I
CC t on t off
V
IH
V
IL
I
IH
I
IL
I
OLeak
Supply current in shutdown mode (all operators)
Amplifier turn-on time
Amplifier turn-off time
SHDN logic high
SHDN logic low
SHDN current high
SHDN current low
Output leakage in shutdown mode
SHDN = V
CC-
T min
< T op
< 85 °C
T min
< T op
< 125 °C
R
L
= 2 kΩ, V out
= (V
CC-
) to (V
CC-
) + 0.2 V
R
L
= 2 kΩ, Vout = (V
CC+
) - 0.5 V to
(V
CC+
) - 0.7 V
SHDN = V
CC+
SHDN = V
CC-
SHDN = V
CC
-
T min
< T op
< T max
4.5
5
300
30
10
10
50
1
50 nΑ
200
1.5 µA
0.5 ns
V pA nA
8/22 DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
Electrical characteristics curves
3 Electrical characteristics curves
Figure 1: Supply current vs. supply voltage at
Vicm = VCC/2
Figure 2: Output current vs. output voltage at VCC = 1.5 V
Figure 3: Output current vs. output voltage at VCC = 5 V Figure 4: Peaking at closed loop gain = -10
Figure 5: Peaking at closed loop gain = -3 at VCC = 1.5 V Figure 6: Peaking at closed loop gain = -3 at VCC = 5 V
DocID17118 Rev 2 9/22
Electrical characteristics curves
Figure 7: Positive slew rate vs. supply voltage
TSV6390, TSV6390A, TSV6391, TSV6391A
Figure 8: Negative slew rate vs. supply voltage
Figure 9: Distortion + noise vs. output voltage at
VCC = 1.8 V
Figure 10: Distortion + noise vs. output voltage at
VCC = 5 V
10/22
Figure 11: Slew rate timing Figure 12: Noise vs. frequency at VCC = 5 V
DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
Application information
4 Application information
4.1 Operating voltages
The TSV6390 and TSV6391 can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8, 3.3 and 5 V power supplies. However, the parameters are very stable in the full V
CC
range and several characterization curves show the TSV639x characteristics at
1.5 V. Additionally, the main specifications are guaranteed in extended temperature ranges from -40 °C to 125 °C.
4.2 Rail-to-rail input
The TSV6390 and TSV6391 are built with two complementary PMOS and NMOS input differential pairs. The devices have a rail-to-rail input, and the input common mode range is extended from (V
CC-
) - 0.1 V to (V
CC+
) + 0.1 V. The transition between the two pairs appears at (V
CC+
) - 0.7 V. In the transition region, the performance of CMRR, PSRR, V io
, and THD is
slightly degraded (as shown in
io
vs. V icm
).
Figure 13: Input offset voltage vs input common-mode at VCC = 1.5 V
Figure 14: Input offset voltage vs input common-mode at VCC = 5 V
4.3
The devices are guaranteed without phase reversal.
Rail-to-rail output
The operational amplifiers’ output levels can go close to the rails: 35 mV maximum above and below the rail when connected to a 10 kΩ resistive load to V
CC
/2.
DocID17118 Rev 2 11/22
Application information
TSV6390, TSV6390A, TSV6391, TSV6391A
4.4 Shutdown function (TSV6390)
The operational amplifier is enabled when the
SHDN pin is pulled high. To disable the amplifier, the
SHDN must be pulled down to V
CC-
. When in shutdown mode, the amplifier’s output is in a high impedance state. The
SHDN pin must never be left floating, but kept tied to V
CC+
or V
CC-
.
The turn-on and turn-off times are calculated for an output variation of ±200 mV (
show the test configurations).
Figure 15: Test configuration for turn-on time (Vout pulled down)
Figure 16: Test configuration for turn-off time (Vout pulled down)
Figure 17: Turn-on time, VCC = 5 V, Vout pulled down,
T = 25 °C
Figure 18: Turn-off time, VCC = 5 V, Vout pulled down,
T = 25 °C
12/22 DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
4.5
4.6
Application information
Optimization of DC and AC parameters
These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (60 µA typical, min/max at ±17 %). Parameters linked to the current consumption value, such as GBP, SR, and A
Vd
, benefit from this narrow dispersion.
Driving resistive and capacitive loads
These products are micropower, low-voltage operational amplifiers optimized to drive rather large resistive loads, above 2 kΩ. For lower resistive loads, the THD level may significantly increase.
These operational amplifiers have a relatively low internal compensation capacitor, making them very fast while consuming very little. They are ideal when used in a non-inverting configuration or in an inverting configuration in the following conditions.
IGainI ≥ 3 in an inverting configuration (C
(C
L
= 100 pF, R
L
= 100 kΩ)
L
= 20 pF, R
Gain ≥ 4 in a non-inverting configuration (C
L
(C
L
= 100 pF, R
L
= 100 kΩ)
L
= 100 kΩ) οr ΙgainI ≥ 10,
= 20 pF, R
L
= 100 kΩ) οr gain ≥ 11,
As these operational amplifiers are not unity gain stable, for a low closed-loop gain it is recommended to use the TSV62x (29 µA, 420 kHz) or TSV63x (60 µA, 880 kHz) which are unity gain stable.
Table 8: Related products
Part # Icc (µA) at 5 V GBP (MHz) SR (V/µs)
Minimum gain for stability
(C
Load
= 100 pF)
TSV620-1
TSV6290-1
TSV630-1
TSV6390-1
29
29
60
60
0.42
1.3
0.88
2.4
0.14
0.5
0.34
1.1
1
11
1
11
4.7
4.8
PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins.
Macromodel
An accurate macromodel of the TSV6390 and TSV6391 is available on STMicroelectronics’ web site at: www.st.com. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV639x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It also helps to validate a design approach and to select the right operational amplifier, but it does not replace on-board measurements.
DocID17118 Rev 2 13/22
Package information
5 Package information
TSV6390, TSV6390A, TSV6391, TSV6391A
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com.
ECOPACK
®
is an ST trademark.
14/22 DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
5.1 SC70-6 (or SOT323-6) package information
Figure 19: SC70-6 (or SOT323-6) package outline
Package information
Ref
E e
HE
L
Q1
A
A1
A2 b c
D
Min.
0.80
0.80
0.15
0.10
1.80
1.15
1.80
0.10
0.10
Table 9: SC70-6 (or SOT323-6) mechanical data
Dimensions
Millimeters
Typ. Min.
0.031
0.65
Max.
1.10
0.10
1.00
0.30
0.18
2.20
1.35
2.40
0.40
0.40
0.031
0.006
0.004
0.071
0.045
0.071
0.004
0.004
Inches
Typ.
0.026
Max.
0.043
0.004
0.039
0.012
0.007
0.086
0.053
0.094
0.016
0.016
DocID17118 Rev 2 15/22
Package information
TSV6390, TSV6390A, TSV6391, TSV6391A
Figure 20: SC70-6 (or SOT323-6) recommended footprint
16/22 DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
5.2 SOT23-6 package information
Figure 21: SOT23-6 package outline
Package information
Ref.
D
E e
H
L
θ
A
A1
A2 b c
Min.
0.90
0.90
0.35
0.09
2.80
1.50
2.60
0.10
0 °
Table 10: SOT23-6 mechanical data
Dimensions
Millimeters
Typ. Min.
0.035
0.95
Max.
1.45
0.10
1.30
0.50
0.20
3.05
1.75
3.00
0.60
10 °
0.035
0.013
0.003
0.110
0.060
0.102
0.004
0 °
Inches
Typ.
0.037
Max.
0.057
0.004
0.051
0.019
0.008
0.120
0.069
0.118
0.024
10 °
DocID17118 Rev 2 17/22
Package information
5.3
TSV6390, TSV6390A, TSV6391, TSV6391A
SC70-5 (or SOT323-5) package information
Figure 22: SC70-5 (or SOT323-5) package outline
SIDE VIEW
DIMENSIONS IN MM
GAUGE PLANE
COPLANAR LEADS
SEATING PLANE
18/22
Ref.
E1 e e1
L
< c
D
E
A
A1
A2 b
TOP VIEW
Min.
0.80
0.80
0.15
0.10
1.80
1.80
1.15
0.26
0°
Table 11: SC70-5 (or SOT323-5) mechanical data
Dimensions
Millimeters Inches
Typ.
0.90
2.00
2.10
1.25
0.65
1.30
0.36
Max.
1.10
0.10
1.00
0.30
0.22
2.20
2.40
1.35
0.46
8°
Min.
0.315
0.315
0.006
0.004
0.071
0.071
0.045
0.010
0°
Typ.
0.035
0.079
0.083
0.049
0.025
0.051
0.014
Max.
0.043
0.004
0.039
0.012
0.009
0.087
0.094
0.053
0.018
8°
DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
5.4 SOT23-5 package information
Figure 23: SOT23-5 package outline
Package information
Ref.
D1 e
E
F
L
K
A
A1
A2
B
C
D
Min.
0.90
0.90
0.35
0.09
2.80
2.60
1.50
0.10
0 degrees
1.05
0.40
0.15
2.90
1.90
0.95
2.80
1.60
0.35
Table 12: SOT23-5 mechanical data
Dimensions
Millimeters
Typ.
1.20
Min.
0.035
Max.
1.45
0.15
1.30
0.50
0.20
3.00
0.035
0.014
0.004
0.110
3.00
1.75
0.102
0.059
0.60 0.004
10 degrees 0 degrees
Inches
Typ.
0.047
0.041
0.016
0.006
0.114
0.075
0.037
0.110
0.063
0.014
Max.
0.057
0.006
0.051
0.020
0.008
0.118
0.118
0.069
0.024
10 degrees
DocID17118 Rev 2 19/22
Ordering information
6 Ordering information
Part number
TSV6390ILT
TSV6390ICT
TSV6390AILT
TSV6390AICT
TSV6391ILT
TSV6391ICT
TSV6391AILT
TSV6391AICT
TSV6390, TSV6390A, TSV6391, TSV6391A
Table 13: Order codes
Temperature range Package
-40 °C to 125 °C
SΟΤ23-6
SC70-6
SΟΤ23-6
SC70-6
SΟΤ23-5
SC70-5
SΟΤ23-5
SC70-5
Packing
Tape and reel
Marking
K109
K19
K142
K42
K108
K20
K141
K41
20/22 DocID17118 Rev 2
TSV6390, TSV6390A, TSV6391, TSV6391A
7
Revision history
Revision history
Date Revision
Table 14: Document revision history
Changes
09-Mar-2010
04-Dec-2015
1
2
Initial release.
Updated layout
Section 2: "Electrical characteristics"
io by ΔV io
/ΔT and updated V
OH
off
conditions.
Electrical characteristic curves
DocID17118 Rev 2 21/22
TSV6390, TSV6390A, TSV6391, TSV6391A
IMPORTANT NOTICE
– PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics
– All rights reserved
22/22 DocID17118 Rev 2
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement