STGB19NC60KDT4,
STGF19NC60KD, STGP19NC60KD
20 A, 600 V short-circuit rugged IGBT
Datasheet - production data
TAB
1
3
TAB
TO-220FP
1
2
3
TO-220
1
2
3
Figure 1: Internal schematic diagram
Features
Low on voltage drop (V
CE(sat)
)
Low C
RES
/ C
IES
ratio (no cross-conduction susceptibility)
Shortcircuit withstand time 10 μs
IGBT co-packaged with ultrafast freewheeling diode
Applications
High frequency inverters
Motor drives
Description
These devices are very fast IGBTs developed using advanced PowerMESH™ technology. This process guarantees an excellent trade-off between switching performance and low on-state behavior.
Order code
STGB19NC60KDT4
STGF19NC60KD
STGP19NC60KD
Table 1: Device summary
Marking Package
GB19NC60KD
GF19NC60KD
GP19NC60KD
D²PAK
TO-220FP
TO-220
Packing
Tape and reel
Tube
July 2017 DocID14701 Rev 4
This is information on a product in full production.
1/26 www.st.com
Contents STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Contents
1 Electrical ratings ............................................................................. 3
2 Electrical characteristics ................................................................ 4
2.1
Electrical characteristics (curves) ...................................................... 7
3 Test circuits ................................................................................... 10
4 Package information ..................................................................... 11
4.1
D 2 PAK (TO-263) type A package information ................................. 11
4.2
4.3
4.4
4.5
4.6
D²PAK (TO-263) type B package information ................................. 14
D²PAK type A packing information .................................................. 17
D²PAK type B packing information .................................................. 19
TO-220FP package information ...................................................... 21
TO-220 type A package information ................................................ 23
5 Revision history ............................................................................ 25
2/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
1
Electrical ratings
Electrical ratings
Table 2: Absolute maximum ratings
Symbol Parameter
Value
D²PAK, TO-220 TO-220FP
600 V
CES
Collector-emitter voltage (V
GE
= 0 V)
Continuous collector current at T
C
= 25 °C
I
C
(1)
Continuous collector current at T
C
= 100 °C
I
CL
(2)
Turn-off latching current
I
CP
(3)
Pulsed collector current
I
V
GE
I
F
FSM
Gate-emitter voltage
Diode RMS forward current at T
C
= 25 °C
Surge non repetitive forward current t p
= 10 ms sinusoidal
P
TOT
Total dissipation at T
C
= 25 °C
V t
T
ISO scw
T stg
J
Insulation withstand voltage (RMS) from all three leads to external heat-sink (t=1 s; T
C
= 25 °C)
Short-circuit withstand time V
CE
= 300 V,
T j
= 125 °C, R
G
= 10 Ω, V
GE
= 12 V
Storage temperature range
Operating junction temperature range
35
20
125
75
75
±20
20
50
10
- 55 to 150
16
10
32
2500
Unit
A
W
V
μs
°C
V
A
A
A
A
V
A
Notes:
(1)
Calculated according to the iterative formula:
(2)
V clamp
= 80 % V
CES
, V
GE
= 15 V, R
G
= 10 Ω, T
J
= 150 °C.
(3)
Pulse width limited by maximum junction temperature.
Table 3: Thermal data
Symbol Parameter
Value
D²PAK, TO-220 TO-220FP
R thj-case
Thermal resistance junction-case IGBT
R thj-case
Thermal resistance junction-case diode
R thj-amb
Thermal resistance junction-ambient
1
3
62.5
3.9
5.6
Unit
°C/W
DocID14701 Rev 4 3/26
Electrical characteristics
2
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Electrical characteristics
T
C
= 25 °C unless otherwise specified
Symbol Parameter
Table 4: Static characteristics
Test conditions
V
(BR)CES
Collector-emitter breakdown voltage
I
C
= 1 mA, V
GE
= 0 V
V
V
I
I
CE(sat)
GE(th)
CES
GES
Collector-emitter saturation voltage
Gate threshold voltage
Collector cut-off current
V
GE
=15 V, I
C
= 12 A
V
GE
= 15 V, I
C
= 12 A,
T
C
= 125 °C
V
CE
= V
GE
, I
C
= 250 µA
V
CE
= 600 V, V
GE
= 0 V
V
CE
=600 V, V
GE
= 0 V,
T
C
= 125 °C (1)
Gate-emitter leakage current V
CE
= 0 V, V
GE
= ±20 V
Notes:
(1)
Defined by design, not subject to production test.
Symbol Parameter
Table 5: Dynamic characteristics
Test conditions
C ies
C oes
C res
Q g
Q ge
Q gc
Input capacitance
Output capacitance
Reverse transfer capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
V
CE
= 25 V, f = 1 MHz,
V
GE
= 0 V
V
CE
= 480 V, I
C
= 12 A,
V
GE
= 0 to 15 V
(see Figure 20: " Gate charge test circuit" )
Min. Typ. Max. Unit
600
4.5
1.65
V
2.0 2.75
V
6.5 V
150 µA
1 mA
±100 nA
Min. Typ. Max. Unit
-
-
1170
127
-
- pF
- 28 -
-
-
-
55
11
26
-
-
- nC
4/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Electrical characteristics
Table 6: Switching on/off (inductive load)
Symbol Parameter Test conditions Min. Typ. Max. Unit t d(on)
Turn-on delay time t r
Current rise time
(di/dt) on
Turn-on current slope t d(on)
Turn-on delay time t r
Current rise time
(di/dt) on
Turn-on current slope t r(Voff)
Off voltage rise time t d(off)
Turn-off delay time t f
Current fall time t r(Voff)
Off voltage rise time t d(off)
Turn-off delay time t f
Current fall time
V
CC
= 480 V, I
C
= 12 A,
R
G
= 10 Ω,
V
GE
= 15 V
(see Figure 19: " Test circuit for inductive load switching" and
Figure 21: " Switching waveform" )
V
CC
= 480 V, I
C
= 12 A,
R
G
= 10 Ω,
V
GE
= 15 V, T
C
=125 °C
(see Figure 19: " Test circuit for inductive load switching" and
Figure 21: " Switching waveform" )
V
CC
= 480 V, I
C
= 12 A,
R
G
= 10 Ω, V
GE
= 15 V
(see Figure 19: " Test circuit for inductive load switching" and
Figure 21: " Switching waveform" )
V
CC
= 480 V, I
C
= 12 A,
R
G
= 10 Ω, V
GE
= 15 V,
T
C
=125 °C (see Figure 19: "
Test circuit for inductive load switching" and Figure 21: "
Switching waveform" )
-
-
- 1450
-
-
- 1380
-
-
-
-
-
-
30
8
30
8
35
105
85
65
145
125
-
-
-
-
-
-
-
-
-
-
-
- ns ns
A/µs ns ns
A/µs ns ns ns ns ns ns
Symbol
E
E
E
E
on off
E
E
(1)
(2)
ts
on off
ts
(1)
(2)
Table 7: Switching energy (inductive load)
Parameter Test conditions Min. Typ. Max. Unit
Turn-on switching energy
Turn-off switching energy
Total switching energy
Turn-on switching energy
Turn-off switching energy
Total switching energy
V
R
(see inductive load switching"
V
T
CC
G
CC
= 480 V, I
= 10 Ω , V
C
GE
Figure 19: " Test circuit for
R
G
= 10 Ω , V
GE
C
= 480 V, I
=125 °C
(see
C
= 12 A,
= 15 V
= 12 A,
= 15 V,
)
Figure 19: " Test circuit for inductive load switching" )
-
-
-
-
-
-
165
255
420
250
445
695
-
-
-
-
-
-
μJ
μJ
μJ
μJ
μJ
μJ
Notes:
(1)
Including the reverse recovery of the diode.
(2)
Including the tail of the collector current.
DocID14701 Rev 4 5/26
Electrical characteristics
Symbol
V
F t rr
Q rr
I rrm t rr
Q rr
I rrm
Parameter
Forward on-voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Table 8: Collector-emitter diode
Test conditions Min. Typ. Max. Unit
I
F
=12 A
I
F
=12 A, T
C
=125 °C
-
-
-
1.9
1.6
31
-
-
-
V
V ns
I
F
=12 A, V
R
=40 V, di/dt=100 A/μs
(see Figure 22: " Diode reverse recovery waveform" )
I
F
=12 A, V
R
=40 V, T
C
=125 °C, di/dt=100 A/μs
(see Figure 22: " Diode reverse recovery waveform" )
-
-
-
-
-
30
2
50
70
4
-
-
-
-
- nC
A ns nC
A
6/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
2.1 Electrical characteristics (curves)
Figure 2: Output characteristics
Electrical characteristics
Figure 3: Transfer characteristics
Figure 4: Collector-emitter on voltage vs temperature
Figure 5: Gate charge vs gate-source voltage
Figure 6: Capacitance variations Figure 7: Normalized gate threshold voltage vs temperature
DocID14701 Rev 4 7/26
Electrical characteristics
Figure 8: Collector-emitter on voltage vs collector current
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Figure 9: Normalized breakdown voltage vs temperature
Figure 10: Switching energy vs temperature Figure 11: Switching energy vs. gate resistance
Figure 12: Switching energy vs collector current Figure 13: Turn-off SOA
8/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Figure 14: Emitter-collector diode characteristics
Electrical characteristics
Figure 15: Thermal impedance for TO-220, D²PAK
Figure 16: Thermal impedance for TO-220FP Figure 17: Maximum DC collector current vs T
CASE
for
TO-220FP
Figure 18: Maximum power dissipation vs T
CASE
for TO-220FP
0
DocID14701 Rev 4 9/26
Test circuits
3 Test circuits
Figure 19: Test circuit for inductive load switching
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Figure 20: Gate charge test circuit
G
C
A A
E
B
L=100 µH
B
G
C
E
D.U.T
+ R
G
-
3.3
µF
1000
µF
V
CC
AM01504v 1
Figure 21: Switching waveform Figure 22: Diode reverse recovery waveform
10/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
4
4.1
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK ® is an ST trademark.
D 2 PAK (TO-263) type A package information
Figure 23: D²PAK (TO-263) type A package outline
DocID14701 Rev 4 11/26
Package information
Dim.
D1
D2
E
E1
E2 e e1
H
A
A1 b b2 c c2
D
J1
L
L1
L2
R
V2
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Table 9: D²PAK (TO-263) type A package mechanical data mm
Typ. Min.
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.50
1.10
10.00
8.50
6.85
7.75
1.30
8.70
7.05
2.54
Max.
4.60
0.23
0.93
1.70
0.60
1.36
9.35
8.00
1.50
10.40
8.90
7.25
4.88
15.00
2.49
2.29
1.27
1.30
0.40
5.28
15.85
2.69
2.79
1.40
1.75
0° 8°
12/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Package information
Figure 24: D²PAK (TO-263) type A recommended footprint (dimensions are in mm)
DocID14701 Rev 4 13/26
Package information
4.2
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
D²PAK (TO-263) type B package information
Figure 25: D²PAK (TO-263) type B package outline
14/26 DocID14701 Rev 4
0079457_23_B
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Package information
Table 10: D²PAK (TO-263) type B mechanical data mm
Dim.
Min. Typ. Max. c1 c2
D
D1
E
E1 e
H
A
A1 b b1 b2 b3 c
L
L1
L2
L3
L4
0.38
1.19
8.60
6.90
10.15
8.10
4.36
0
0.70
0.51
1.17
1.36
0.38
2.54 BSC
0.25
0.534
1.34
9.00
7.50
10.55
8.70
4.56
0.25
0.90
0.89
1.37
1.46
0.694
5.28
15.00
1.90
4.78
15.60
2.50
1.65
1.78
DocID14701 Rev 4 15/26
Package information STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Figure 26: D²PAK (TO-263) type B recommended footprint (dimensions are in mm)
16/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
4.3 D²PAK type A packing information
Figure 27: D²PAK type A tape outline
Package information
DocID14701 Rev 4 17/26
Package information STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Figure 28: D²PAK type A reel outline
18/26
Dim.
P1
P2
R
T
W
E
F
K0
P0
A0
B0
D
D1
Table 11: D²PAK type A tape and reel mechanical data
Tape Reel mm
Dim.
Min. Max. Min.
10.5
15.7
1.5
1.59
1.65
11.4
4.8
3.9
11.9
1.9
50
0.25
23.7
10.7
15.9
1.6
1.61
1.85
11.6
5.0
4.1
12.1
2.1
0.35
24.3
A
B
C
D
1.5
12.8
20.2
G
N
T
24.4
100
Base quantity
Bulk quantity mm
Max.
330
1000
1000
13.2
26.4
30.4
DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
4.4 D²PAK type B packing information
Figure 29: D²PAK type B tape outline
Package information
Figure 30: D²PAK type B reel outline
DocID14701 Rev 4 19/26
Package information
Dim.
D
G
N
T
A
B
C
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Table 12: D²PAK type B reel mechanical data mm
Min. Max.
330
1.5
12.8
20.2
24.4
100
13.2
26.4
30.4
20/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
4.5 TO-220FP package information
Figure 31: TO-220FP package outline
Package information
DocID14701 Rev 4
7012510_Rev_12_B
21/26
Package information
Dim.
G
G1
H
L2
L3
L4
L5
L6
L7
Dia
E
F
F1
F2
A
B
D
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Table 13: TO-220FP package mechanical data mm
Typ. Min.
4.4
2.5
2.5
0.45
0.75
1.15
1.15
4.95
2.4
10
16
Max.
4.6
2.7
2.75
0.7
1
1.70
1.70
5.2
2.7
10.4
28.6
9.8
2.9
15.9
9
3
30.6
10.6
3.6
16.4
9.3
3.2
22/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
4.6 TO-220 type A package information
Figure 32: TO-220 type A package outline
Package information
DocID14701 Rev 4 23/26
Package information
Dim. e e1
F
H1
J1
L
L1
L20
A b b1 c
D
D1
E
L30
øP
Q
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
Table 14: TO-220 type A package mechanical data mm
Typ. Min.
4.40
0.61
1.14
0.48
15.25
1.27
Max.
4.60
0.88
1.55
0.70
15.75
10.00
2.40
4.95
1.23
6.20
2.40
13.00
3.50
3.75
2.65
16.40
28.90
10.40
2.70
5.15
1.32
6.60
2.72
14.00
3.93
3.85
2.95
24/26 DocID14701 Rev 4
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
5
Revision history
Revision history
Date Revision
Table 15: Document revision history
Changes
08-May-2008 1
28-May-2008
31-Jul-2012
17-Jul-2017
2
3
4
Initial release
– Value on Table 3: Thermal resistance has been changed.
– Inserted Figure 16: Thermal impedance for TO-220, D²PAK and
Figure 17: Thermal impedance for TO-220FP
Added: Figure 18 and Figure 19 on page 8.
Modified internal schematic diagram on cover page
Modified Table 2: "Absolute maximum ratings" , Table 3: "Thermal data"
, and Table 4: "Static characteristics" .
Modified Figure 3: "Transfer characteristics" , Figure 4: "Collectoremitter on voltage vs temperature"
and Figure 8: "Collector-emitter on voltage vs collector current" .
Updated Section 4: "Package information" .
Minor text changes.
DocID14701 Rev 4 25/26
STGB19NC60KDT4, STGF19NC60KD,
STGP19NC60KD
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved
26/26 DocID14701 Rev 4
