STGB19NC60W,
STGP19NC60W
19 A, 600 V - ultrafast IGBT
Datasheet - obsolete product
TAB
1
3
TAB
TO-220
C(2, TAB)
1
2
3
Figure 1: Internal schematic diagram
Features
•
High frequency operation
•
Low C
RES
/ C
IES
ratio (no cross-conduction susceptibility)
Applications
•
High frequency inverters
•
High frequency motor controls, inverters,
UPS
•
HF, SMPS and PFC in both hard switch and resonant topologies
Description
These IGBTs utilize the advanced PowerMESH™ process resulting in an excellent trade-off between switching performance and low on-state behavior.
G(1)
E(3)
STGB19NC60WT4
STGP19NC60W
G1C2TE3
Table 1: Device summary
Marking Package
GB19NC60W
GP19NC60W
D²PAK
TO-220
Packaging
Tape and reel
Tube
November 2016 DocID029998 Rev 1
This is information on a discontinued product.
1/19
www.st.com
Contents
Contents
STGB19NC60W, STGP19NC60W
1 Electrical ratings ............................................................................. 3
2 Electrical characteristics ................................................................ 4
2.1
Electrical characteristics (curves) ...................................................... 6
3 Test circuits ..................................................................................... 9
4 Package information ..................................................................... 10
4.1
4.2
4.3
TO-220 type A package information ................................................ 11
D²PAK (TO-263) type A package information ................................. 13
D²PAK packaging mechanical data ................................................. 16
5 Revision history ............................................................................ 18
Obsolete Product(s) - Obsolete Product(s)
DocID029998 Rev 1 2/19
STGB19NC60W, STGP19NC60W
1 Electrical ratings
Symbol
V
CES
I
C
(1)
I
C
(1)
I
CL
(2)
V
GE
P
TOT
T stg
T
J
Table 2: Absolute maximum ratings
Parameter
Collector-emitter voltage (V
GE
= 0)
Continuous collector current at T
C
= 25 °C
Continuous collector current at T
C
= 100 °C
Turn-off latching current
Gate-emitter voltage
Total dissipation at T
C
= 25 °C
Storage temperature range
Operating junction temperature range
Notes:
(1)
Calculated according to the iterative formula:
( ) =
×
(2)
V
CLAMP
= 80% (V
CES
), V
GE
= 15 V, R
G
= 10 Ω , T
J
= 150 °C
(
Symbol
)
(
(
Table 3: Thermal data
Parameter
Rthj-case
Rthj-amb
Thermal resistance junction-case max
Thermal resistance junction-ambient max
)
× ( ))
Electrical ratings
Value
600
40
22
30
±20
130
- 55 to 150
Unit
V
A
A
A
V
W
°C
Value
0.95
62.5
Unit
°C/W
°C/W
Obsolete Product(s) - Obsolete Product(s)
3/19 DocID029998 Rev 1
Electrical characteristics
2 Electrical characteristics
STGB19NC60W, STGP19NC60W
T
C
= 25 °C unless otherwise specified
Symbol Parameter
Table 4: Static
Test conditions
V
(BR)CES
Collector-emitter breakdown voltage
V
GE
= 0 V, I
C
= 1 mA
V
V
I
I
CE(sat)
GE(th)
CES
GES g fs
Collector-emitter saturation voltage
Gate threshold voltage
Collector cut-off current
V
GE
= 15 V, I
C
= 12 A
V
GE
= 15 V, I
C
= 12 A,
T
J
= 125 °C
V
CE
= V
GE
, I
C
= 250 µA
V
GE
= 0 V, V
CE
= 600 V
V
GE
= 0 V, V
CE
= 600 V,
T
C
=125 °C (1)
Gate-emitter leakage current V
CE
= 0 V, V
GE
= ± 20 V
Forward transconductance V
CE
= 15 V, I
C
= 12 A
Min. Typ. Max. Unit
600
3.75
2.1 2.5
1.8
V
5.75 V
150
V
µA
1 mA
±100 nA
10 S
Notes:
(1)
Defined by design, not subject to production test.
Symbol Parameter
Table 5: Dynamic
Test conditions
C ies
C oes
C res
Q g
Q ge
Q gc
Input capacitance
Output capacitance
Reverse transfer capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
V
CE
= 25 V, f = 1 MHz,
V
GE
= 0 V
V
CE
= 390 V, I
C
= 12 A,
V
GE
= 15 V
(see Figure 16: "Gate charge test circuit" )
Min. Typ. Max. Unit
- 1180
- 130
-
- pF
- 26 -
-
-
-
53
10
21
-
-
- nC
Obsolete Product(s) - Obsolete Product(s)
4/19 DocID029998 Rev 1
STGB19NC60W, STGP19NC60W
Symbol
Electrical characteristics
Table 6: Switching on/off (inductive load)
Parameter Test conditions Min. Typ. Max. Unit t d(on) t r t f
Turn-on delay time
Current rise time
(di/dt) on
Turn-on current slope t d(on)
Turn-on delay time t r
Current rise time
(di/dt) on
Turn-on current slope t r
(V off
) Off voltage rise time t d
( off
) Turn-off delay time t f
Current fall time t r
(V off
) Off voltage rise time t d
( off
) Turn-off delay time
Current fall time
V
CC
= 390 V, I
C
= 12 A,
V
GE
= 15 V, R
G
= 10 Ω
(see Figure 17: "Switching waveform" )
V
CC
= 390 V, I
C
= 12 A,
V
GE
= 15 V, R
G
= 10 Ω ,
T
C
= 125°C
(see Figure 17: "Switching waveform" )
V
CC
= 390 V, I
C
= 12 A,
V
GE
= 15 V, R
G
= 10 Ω
(see Figure 17: "Switching waveform" )
V
CC
= 390 V, I
C
= 12 A,
V
GE
= 15 V, R
G
= 10 Ω ,
T
C
= 125°C
(see Figure 17: "Switching waveform" )
-
-
- 1400
-
-
-
-
-
- 1600
- 25
- 8
-
25
7
22
90
43
47
127
77
-
-
-
-
-
-
-
-
-
-
-
- ns ns
A/µs ns ns
A/µs ns ns ns ns ns ns
Symbol
E ts
E on
(1)
Table 7: Switching energy (inductive load)
Parameter
E on
(1) Turn-on switching energy
E off
(2) Turn-off switching energy
Total switching energy
Turn-on switching energy
E off
(2) Turn-off switching energy
Test conditions
V
CC
= 390 V, I
C
= 12 A,
R
G
= 10 Ω , V
GE
= 15 V
(see Figure 17: "Switching waveform" )
Min. Typ. Max. Unit
-
-
-
-
-
81
125
206
161
255
µJ
µJ
µJ
µJ
µJ
E ts
Total switching energy
V
CC
= 390 V, I
C
= 12 A,
R
G
= 10 Ω , V
GE
= 15 V,
T
C
= 125°C
(see Figure 17: "Switching waveform" )
- 416 µJ
Notes:
(1)
Including the reverse recovery of the external diode. The diode is the same of the co-packed STGP19NC60WD.
(2) including the tail of the collector current.
Obsolete Product(s) - Obsolete Product(s)
5/19 DocID029998 Rev 1
Electrical characteristics
2.1 Electrical characteristics (curves)
Figure 2: Output characteristics
STGB19NC60W, STGP19NC60W
Figure 3: Transfer characteristics
Figure 4: Transconductance Figure 5: Collector-emitter on voltage vs temperature
Figure 6: Gate charge vs gate-source voltage Figure 7: Capacitance variations
Obsolete Product(s) - Obsolete Product(s)
6/19 DocID029998 Rev 1
STGB19NC60W, STGP19NC60W
Figure 8: Normalized gate threshold voltage vs temperature
Electrical characteristics
Figure 9: Collector-emitter on voltage vs collector current
Figure 10: Normalized breakdown voltage vs temperature
Figure 11: Switching energy vs temperature
Figure 12: Switching energy vs gate resistance Figure 13: Switching energy vs collector current
Obsolete Product(s) - Obsolete Product(s)
DocID029998 Rev 1 7/19
Electrical characteristics
Figure 14: Turn-off SOA
STGB19NC60W, STGP19NC60W
Obsolete Product(s) - Obsolete Product(s)
8/19 DocID029998 Rev 1
STGB19NC60W, STGP19NC60W
3 Test circuits
Figure 15: Test circuit for inductive load switching
G
C
A
E
B
A
L=100 µH
B
G
C
E
D.U.T
3.3
µF
+ R
G
-
1000
µF
V
CC
Test circuits
Figure 16: Gate charge test circuit
AM01504v 1
Figure 17: Switching waveform
V
CE
V G
I
C
Td(on)
Ton
Tr(Ion)
90%
10%
Tr(Vof f)
Tcross
90%
10%
Td(of f)
Toff
Tf
90%
10%
AM01506v1
Obsolete Product(s) - Obsolete Product(s)
9/19 DocID029998 Rev 1
Package information
4 Package information
STGB19NC60W, STGP19NC60W
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com.
ECOPACK ® is an ST trademark.
Obsolete Product(s) - Obsolete Product(s)
10/19 DocID029998 Rev 1
STGB19NC60W, STGP19NC60W
4.1 TO-220 type A package information
Figure 18: TO-220 type A package outline
Package information
Obsolete Product(s) - Obsolete Product(s)
0015988_ typeA_Rev_21
11/19 DocID029998 Rev 1
Package information
Dim.
L
L1
L20
L30 e1
F
H1
J1
øP
Q
D
D1
E e
A b b1 c
STGB19NC60W, STGP19NC60W
Table 8: TO-220 type A mechanical data mm
Min. Typ. Max.
4.40
0.61
1.14
0.48
15.25
1.27
4.60
0.88
1.55
0.70
15.75
10.00
2.40
4.95
1.23
6.20
2.40
13.00
3.50
3.75
2.65
16.40
28.90
10.40
2.70
5.15
1.32
6.60
2.72
14.00
3.93
3.85
2.95
Obsolete Product(s) - Obsolete Product(s)
12/19 DocID029998 Rev 1
STGB19NC60W, STGP19NC60W
4.2 D²PAK (TO-263) type A package information
Package information
Figure 19: D²PAK (TO-263) type A package outline
Obsolete Product(s) - Obsolete Product(s)
0079457_A_rev22
DocID029998 Rev 1 13/19
Package information
Dim. e e1
H
J1
D2
E
E1
E2 c c2
D
D1
A
A1 b b2
L
L1
L2
R
V2
STGB19NC60W, STGP19NC60W
Table 9: D²PAK (TO-263) type A package mechanical data mm
Min. Typ. Max.
4.88
15
2.49
2.29
1.27
1.30
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.50
1.10
10
8.50
6.85
0.4
7.75
1.30
8.70
7.05
2.54
5.28
15.85
2.69
2.79
1.40
1.75
4.60
0.23
0.93
1.70
0.60
1.36
9.35
8.00
1.50
10.40
8.90
7.25
0° 8°
Obsolete Product(s) - Obsolete Product(s)
14/19 DocID029998 Rev 1
STGB19NC60W, STGP19NC60W Package information
Figure 20: D²PAK (TO-263) recommended footprint (dimensions are in mm)
Footprint
Obsolete Product(s) - Obsolete Product(s)
15/19 DocID029998 Rev 1
Package information
4.3 D²PAK packaging mechanical data
Figure 21: Tape outline
STGB19NC60W, STGP19NC60W
Obsolete Product(s) - Obsolete Product(s)
16/19 DocID029998 Rev 1
STGB19NC60W, STGP19NC60W
D
B
Figure 22: Reel outline
Package information
T
40mm min.
access hole at slot location
C
A
Full radius
Tape slot in core for tape start
2.5mm min.width
N
G measured at hub
AM06038v1
Table 10: D²PAK tape and reel mechanical data
Tape Reel mm mm
Dim. Dim.
Min. Max. Min. Max.
330 A0
B0
10.5
15.7
10.7
15.9
A
B 1.5
1.5
1.59
1.65
1.6
1.61
1.85
C
D
G
12.8
20.2
24.4
13.2 D
D1
E 26.4
F 11.4 11.6 N 100
K0 4.8 5.0 T
T 0.25
P0 3.9 4.1
P1
P2
11.9
1.9
12.1
2.1
Base quantity
Bulk quantity
1000
1000
R 50
0.35
W 23.7 24.3
30.4
DocID029998 Rev 1 17/19
Revision history
5
STGB19NC60W, STGP19NC60W
Revision history
Date Revision
Table 11: Document revision history
Changes
09-Nov-2016 1
Initial release. Part numbers previously included in datasheet
DocID12759
Obsolete Product(s) - Obsolete Product(s)
18/19 DocID029998 Rev 1
STGB19NC60W, STGP19NC60W
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics – All rights reserved
Obsolete Product(s) - Obsolete Product(s)
19/19 DocID029998 Rev 1
