TN5015H-6T
High temperature 50 A SCRs
Datasheet - production data
K
A
G
G
A
K
A
TO-220AB
Features
High junction temperature: T j
= 150 °C
High noise immunity up to 150 °C
Gate triggering current I = 15 mA
Peak off-state voltage V
GT
DRM
/V
RRM
= 600 V
High turn-on current rise dI/dt = 100 A/µs
ECOPACK ® 2 compliant component
Applications
Motorbike voltage regulator circuits
Inrush current limiting circuits
Motor control circuits and starters
Solid state relays
Description
Packaged in a non-isolated TO-220AB, this device offers high thermal performance during operation of up to 50 A, thanks to a junction temperature of up to 150 °C.
Its noise immunity (dV/dt = 500 V/μs) trade-off versus gate triggering current (I
GT
= 15 mA) and its turnon current rise (dI/dt = 100 A/μs) allow the design of robust and compact control circuits for voltage regulators in motorbikes and industrial drives, overvoltage crowbar protection, motor control circuits in power tools and kitchen appliances, and inrush current-limiting circuits.
Order code
Table 1: Device summary
Package V
DRM
/V
RRM
I
GT
TN5015H-6T TO-220AB 600 V 15 mA
June 2017 DocID030698 Rev 1
This is information on a product in full production.
1/9 www.st.com
Characteristics
1 Characteristics
TN5015H-6T
Table 2: Absolute maximum ratings (limiting values), T j
= 25 °C unless otherwise specified
Symbol Parameter Value Unit
I
T(RMS)
RMS on-state current
(180 ° conduction angle)
T c
= 120 °C 50 A
I
T(AV)
Average on-state current
(180 ° conduction angle)
I
TSM
Non repetitive surge peak on-state current
( T j
initial = 25 °C)
I 2 t I 2 t value for fusing dl/dt
Critical rate of rise of on-state current
I
G
= 2 x I
GT
, tr ≤ 100 ns
V
DRM
/V
RRM
Repetitive peak off-state voltage
T c
= 122 °C
T c
= 128 °C
T c
= 134 °C t p
= 8.3 ms t p
= 10 ms t p
= 10 ms f = 60 Hz
30
25
20
493
450
1012
100
A
A
A 2 s
A/µs
T j
= 150 °C
V
DSM
/V
RSM
Non repetitive surge peak off-state voltage t p
= 10 ms
I
GM
P
G(AV)
V
RGM
T stg
T j
T l
Peak gate current t p
= 20 µs
Average gate power dissipation
Maximum peak reverse gate voltage
Storage junction temperature range
T
T j j
= 150 °C
= 150 °C
Maximum operating junction temperature
Maximum lead temperature soldering during 10 s
600
V
DRM
/V
RRM
+
100
4
1
5
-40 to +150
-40 to +150
260
V
V
Symbol
Table 3: Electrical characteristics (T j
= 25 °C unless otherwise specified)
Test conditions Value Unit
I
GT
V
GT
V
GD
I
H
I
L dV/dt t gt t q
V
D
= 12 V, R
L
= 33 Ω
V
D
= V
DRM
, R
L
= 3.3 kΩ
I
T
= 500 mA, gate open
I
TM
= 100 A, V
D
= 402 V, (d
I
/dt)off = 30
A/µs, V
R
= 25 V, dV
D
/dt = 50 V/µs
T
T j j
= 150 °C
I
G
= 1.2 x I
GT
V
D
= 402 V, gate open T j
= 150 °C
I
TM
= 100 A, V
D
= 402 V, I
G
= 30 mA, (dI
G
/dt) max = 0.2 A/µs
= 150 °C
Max.
Max.
Max.
Max.
Min.
Typ.
Typ.
15
1.3
Min. 0.15
60
80 mA
V
V mA mA
500 V/µs
1.9 µs
85 µs
A
W
V
°C
°C
°C
2/9 DocID030698 Rev 1
TN5015H-6T
Symbol
V
TM
V
TO
R
D
I
DRM
, I
RRM
V
D
= V
DRM
= V
RRM
Table 4: Static characteristics
Test conditions
I
TM
= 100 A, t p
= 380 µs
Threshold voltage
Dynamic resistance
T
T
T j j j
= 25 °C
= 150 °C
= 150 °C
T j
= 25 °C
T j
= 150 °C
Table 5: Thermal parameters
Parameter
Junction to case (DC)
Junction to ambient (DC)
Symbol
R th(j-c)
R th(j-a)
Max.
Max.
Max.
Max.
Characteristics
Value
1.65
0.85
9
10
6
Unit
V mΩ
µA mA
Max.
Typ.
Value
0.6
60
Unit
°C/W
DocID030698 Rev 1 3/9
Characteristics
1.1 Characteristics (curves)
Figure 1: Maximum average power dissipation versus average on-state current
50
P(W)
40
30
20
10
0
0 5
α = 30 °
α = 60 °
α = 120°
α = 90 °
α = 180°
D.C
10 15 20 25
I
T(AV)
(A)
30 35 40 45
TN5015H-6T
40
30
20
10
Figure 2: Average and DC on-state current versus case temperature
I
T(AV)
(A)
60
α = 30° α = 60°
α = 90° α = 120°
α = 180°
D.C
50
50
0
0 25 50 75 100
T
C
(°C)
125 150
Figure 3: Average and D.C. on state current versus ambient temperature
I
T(AV)
(A)
3.0
Figure 4: Relative variation of thermal impedance versus pulse duration
1.0E+00
K=[Z th
/R th
]
Z th(j-c) 2.5
D.C
Z th(j-a)
2.0
α = 180 °
1.0E-01
1.5
1.0E-02
1.0
4/9
0.5
0.0
0
T
A
(°C) tp(s)
1.0E-03
1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03
25 50 75 100 125 150
Figure 5: Relative variation of gate trigger current and gate voltage versus junction temperature
(typical values)
I
GT
,V
GT
[T j
] / I
GT
,V
GT
[T j
=25 °C]
2.5
2.0
1.5
1.0
0.5
0.0
-50
V
GT
I
GT
-25 0 25 50 75
T j
(°C)
100 125 150
Figure 6: Relative variation of holding and latching current versus junction temperature
(typical values)
I
H
, I
L
[T j
]/ I
H
, I
L
[T j
=25 °C]
2.5
2.3
2.0
1.8
1.5
1.3
1.0
0.8
0.5
0.3
0.0
-50
I
L
-25
I
H
0 25 50 75 100
T j
(°C)
125 150
DocID030698 Rev 1
TN5015H-6T
Figure 7: Relative variation of static dV/dt immunity versus junction temperature
(typical values)
12 d V /d t [ T j ] / d V /d t [ T j = 150 °C ]
11
V
D
= 402 V
10
9
8
7
6
5
4
3
2
1
0
90
Above test equipment capability
95 100 105 110 115 120 125 130 135 140 145 150
Tj(°C)
0
1
Non repetitive
T j initial = 25 °C
Characteristics
500
Figure 8: Surge peak on-state current versus number of cycles
I
TSM
(A)
400
300
200
100
Repetitive
T c
= 120 °C
10 100
Number of cycles
1000
Figure 9: Non repetitive surge peak on-state current for a sinusoidal pulse with width t p
< 10 ms
Figure 10: On-state characteristics
(maximum values)
Figure 11: Relative variation of leakage current versus junction temperature
1.0E+00
I
DRM
, I
RRM
[Tj; V
DRM
, V
RRM
] / I
DRM
, I
RRM
[150 °C; 600 V]
V
DRM
= V
RRM
= 600 V
1.0E-01
1.0E-02
1.0E-03
1.0E-04
1.0E-05
25 50 75
Tj(°C)
100 125 150
DocID030698 Rev 1 5/9
Package information
2
2.1
Package information
TN5015H-6T
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK ® is an ST trademark.
Epoxy meets UL94, V0
Lead-free, halogen-free package
TO-220AB package information
Figure 12: TO-220AB (NIns. & Ins.) package outline
6/9 DocID030698 Rev 1
TN5015H-6T
Ref.
Package information
Table 6: TO-220AB (NIns. & Ins.) package mechanical data
Dimensions
Millimeters
Inches (1)
Min. Typ.
A a1 a2
B b1 b2
C c1
L
I2
I3 c2 e
F
I
I4
15.20
2.40
2.40
6.20
3.73
2.65
1.14
1.14
15.80
13.00
10.00
0.61
1.23
4.40
0.49
3.75
16.40
M 2.6
Notes:
(1)
Inch dimensions are for reference only.
Max.
15.90
2.72
2.70
6.60
3.88
2.95
1.70
1.70
16.80
14.00
10.40
0.88
1.32
4.60
0.70
Min.
0.5984
0.5118
0.3937
0.0240
0.0484
0.1732
0.0193
0.0945
0.0945
0.2441
0.1469
0.1043
0.0449
0.0449
0.6220
Typ.
0.1476
0.6457
0.1024
Max.
0.6260
0.5512
0.4094
0.0346
0.0520
0.1811
0.0276
0.1071
0.1063
0.2598
0.1528
0.1161
0.0669
0.0669
0.6614
DocID030698 Rev 1 7/9
Ordering information
3 Ordering information
Figure 13: Ordering information scheme
TN5015H-6T
TN 50 15 H - 6 T
Series
TN = SCR
Current
50 = 50 A
Gate sensitivity
15 = 15 m A
High temperature
H = 150 °C
Voltage
6 = 600 V
Package
T = TO-220AB
Packing mode
Blank = tube
4
Order code
TN5015H-6T
Marking
TN5015H6
Table 7: Ordering information
Package Weight Base qty.
TO-220AB 2.3 g 50
Delivery mode
Tube
Revision history
Date
Table 8: Document revision history
Revision
01-Jun-2017 1 Initial release.
Changes
8/9 DocID030698 Rev 1
TN5015H-6T
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics
– All rights reserved
DocID030698 Rev 1 9/9
