STB25NF06AG
Automotive-grade N-channel 60 V, 0.056
Ω typ., 19 A
STripFET™ II Power MOSFET in a D²PAK package
Datasheet - production data
TAB
2
1
3
Features
Order code V
DS
R
DS(on)
max. I
D
P
TOT
STB25NF06AG 60 V 0.070 Ω 19 A 50 W
Designed for automotive applications and
AEC-Q101 qualified
100% avalanche tested
Application-oriented characterization
D²PAK
Applications
Switching applications
Figure 1: Internal schematic diagram
Order code
STB25NF06AG
Description
This Power MOSFET series realized with
STMicroelectronics unique STripFET™ process is specifically designed to minimize input capacitance and gate charge. It is therefore ideal as a primary switch in advanced high-efficiency isolated DC-DC converters for Telecom and
Computer applications. It is also suitable for any application with low gate charge drive requirements.
Table 1: Device summary
Marking Package
25NF06 D²PAK
Packing
Tape and reel
May 2016 DocID029340 Rev 1
This is information on a product in full production.
1/15 www.st.com
Contents
Contents
STB25NF06AG
1 Electrical ratings ............................................................................. 3
2 Electrical characteristics ................................................................ 4
2.1
Electrical characteristics (curves) ...................................................... 6
3 Test circuits ..................................................................................... 8
4 Package information ....................................................................... 9
4.1
4.2
D²PAK (TO-263) type A package information ................................... 9
D²PAK packing information ............................................................. 12
5 Revision history ............................................................................ 14
2/15 DocID029340 Rev 1
STB25NF06AG
1 Electrical ratings
Symbol
V
DS
V
GS
I
D
I
DM
(1)
P
TOT
I
AV
E
AS
T stg
T j
Table 2: Absolute maximum ratings
Parameter
Drain-source voltage
Gate-source voltage
Drain current (continuous) at T case
= 25 °C
Drain current (continuous) at T case
= 100 °C
Drain current (pulsed)
Total dissipation at T case
= 25 °C
Non-repetitive avalanche current
Single pulse avalanche energy
Storage temperature range
Operating junction temperature range
Notes:
(1)
Pulse width is limited by safe operating area.
Symbol
Table 3: Thermal data
Parameter
R thj-case
R
thj-pcb
(1)
Thermal resistance junction-case max.
Thermal resistance junction-pcb max.
Notes:
(1)
When mounted on 1 inch², 2oz Cu, FR-4 board
Electrical ratings
Value
60
±20
19
13
76
50
10
220
-55 to 175
Unit
V
V
A
A
W
A mJ
°C
Value
3.00
35
Unit
°C/W
DocID029340 Rev 1 3/15
Electrical characteristics
2 Electrical characteristics
(T case
= 25 °C unless otherwise specified)
Symbol Parameter
Table 4: Static
Test conditions
V
(BR)DSS
Drain-source breakdown voltage
V
GS
= 0 V, I
D
= 250 µA
I
DSS
Zero gate voltage drain current
V
GS
= 0 V, V
DS
= 60 V
V
GS
= 0 V, V
DS
= 60 V,
T case
= 125 °C (1)
I
GSS
V
GS(th)
R
DS(on)
Gate-body leakage current
Gate threshold voltage
Static drain-source on-resistance
V
DS
= 0 V, V
GS
= ±20 V
V
DS
= V
GS
, I
D
= 250 µA
V
GS
= 10 V, I
D
= 10 A
STB25NF06AG
Min. Typ. Max. Unit
60 V
1
µA
10
±100 µA
4 V
0.056 0.070 Ω
2
Notes:
(1)
Defined by design, not subject to production test
Symbol Parameter
Table 5: Dynamic
Test conditions
C iss
C oss
C rss
Q g
Q gs
Q gd
Input capacitance
Output capacitance
Reverse transfer capacitance
Total gate charge
Gate-source charge
Gate-drain charge
V
DS
= 25 V, f = 1 MHz, V
GS
= 0 V
V
DD
= 30 V, I
D
= 19 A, V
GS
= 10 V
(see Figure 14: "Test circuit for gate charge behavior" )
Symbol Parameter
Table 6: Switching times
Test conditions t d(on)
Turn-on delay time V
DD
= 30 V, I
D
= 10 A R
G
= 4.7 Ω, t r
Rise time
V
GS
= 10 V (see Figure 13: "Test circuit for resistive load switching
t d(off)
Turn-off delay time
times" and Figure 18: "Switching
t f
Fall time
time waveform" )
Min. Typ. Max. Unit
-
-
387
103
-
- pF
- 43 -
-
-
-
14.1
2.8
5.4
-
-
- nC
Min. Typ. Max. Unit
-
-
-
-
8
27
28
15
-
-
-
- ns
4/15 DocID029340 Rev 1
STB25NF06AG
Symbol Parameter
Table 7: Source-drain diode
Test conditions
I
SD
Source-drain current
I
SDM
(1)
Source-drain current (pulsed)
V
SD
(2)
Forward on voltage V
GS
= 0 V, I
SD
= 10 A
I t
Q rr rr
RRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
= 19 A, di/dt = 100 A/µs,
V
DD
= 48 V (see Figure 15: "Test circuit for inductive load switching and diode recovery times" )
Notes:
(1)
Pulse width is limited by safe operating area.
(2)
Pulse test: pulse duration = 300 µs, duty cycle 1.5%.
Electrical characteristics
Min. Typ. Max. Unit
- 19 A
-
-
- 34
76
1.2
A
V ns
- 34.5 µC
- 2 A
DocID029340 Rev 1 5/15
Electrical characteristics
2.1 Electrical characteristics (curves)
Figure 2: Safe operating area
STB25NF06AG
Figure 3: Thermal impedance
Figure 4: Output characteristics Figure 5: Transfer characteristics
Figure 6: Gate charge vs gate-source voltage Figure 7: Static drain-source on-resistance
6/15 DocID029340 Rev 1
STB25NF06AG
Figure 8: Capacitance variations
Electrical characteristics
Figure 9: Normalized gate threshold voltage vs temperature
Figure 10: Normalized on-resistance vs temperature
Figure 11: Normalized V(BR)DSS vs temperature
Figure 12: Source-drain diode forward characteristics
DocID029340 Rev 1 7/15
Test circuits
3 Test circuits
Figure 13: Test circuit for resistive load switching times
STB25NF06AG
Figure 14: Test circuit for gate charge behavior
Figure 15: Test circuit for inductive load switching and diode recovery times
Figure 16: Unclamped inductive load test circuit
Figure 17: Unclamped inductive waveform Figure 18: Switching time waveform
8/15 DocID029340 Rev 1
STB25NF06AG
4
4.1
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK ® is an ST trademark.
D²PAK (TO-263) type A package information
Figure 19: D²PAK (TO-263) type A package outline
DocID029340 Rev 1
0079457_A_rev22
9/15
Package information
Dim.
D2
E
E1
E2 e e1
H c c2
D
D1
A
A1 b b2
J1
L
L1
L2
R
V2
Table 8: D²PAK (TO-263) type A package mechanical data mm
Min. Typ.
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.50
1.10
10
8.50
6.85
8.70
7.05
2.54
4.88
15
2.49
2.29
1.27
1.30
7.75
1.30
0.4
0°
STB25NF06AG
Max.
4.60
0.23
0.93
1.70
0.60
1.36
9.35
8.00
1.50
10.40
8.90
7.25
5.28
15.85
2.69
2.79
1.40
1.75
8°
10/15 DocID029340 Rev 1
STB25NF06AG Package information
Figure 20: D²PAK (TO-263) recommended footprint (dimensions are in mm)
DocID029340 Rev 1 11/15
Package information
4.2 D²PAK packing information
Figure 21: Tape outline
STB25NF06AG
12/15 DocID029340 Rev 1
STB25NF06AG
Figure 22: Reel outline
Package information
Dim.
K0
P0
P1
P2
R
T
W
A0
B0
D
D1
E
F
Min.
4.8
3.9
11.9
1.9
50
0.25
23.7
10.5
15.7
1.5
1.59
1.65
11.4
Table 9: D²PAK tape and reel mechanical data
Tape Reel mm
Max.
10.7
15.9
1.6
1.61
1.85
11.6
5.0
4.1
12.1
2.1
Dim.
Min.
A
B
C
D
G
N
T
Base quantity
Bulk quantity
1.5
12.8
20.2
24.4
100
0.35
24.3 mm
Max.
330
13.2
26.4
30.4
1000
1000
DocID029340 Rev 1 13/15
Revision history
5
STB25NF06AG
Revision history
Date
12-May-2016
Table 10: Document revision history
Revision
1
Changes
Initial release.
14/15 DocID029340 Rev 1
STB25NF06AG
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics
– All rights reserved
DocID029340 Rev 1 15/15
