JVC SP-UXG70 Instructions Manual

Cover[A].fm Page 1 Wednesday, May 10, 2006 11:03 AM

MICRO COMPONENT SYSTEM

UX-G70

—Consists of CA-UXG70 and SP-UXG70

SUPER VIDEO

INSTRUCTIONS

GVT0181-012A

[A]

Safty[A].fm Page 1 Thursday, March 30, 2006 3:31 PM

Warnings, Cautions and Others

CAUTION— (Standby/on) button!

Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The (Standby/on)

• When the System is on standby, the STANDBY lamp lights red.

button in any position does not disconnect the mains line.

• When the System is turned on, the STANDBY lamp goes off.

The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2.

CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3.

CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.

CAUTION

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted candles, on the apparatus.

• When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1. Front: No obstructions and open spacing.

2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.

3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.

Front view

15 cm

Side view

15 cm

15 cm 1 cm 1 cm 15 cm

15 cm

SP-UXG70 CA-UXG70 SP-UXG70

10 cm

CA-UXG70

[European Union only]

G-1

UX-G70[A].book Page 1 Wednesday, May 10, 2006 1:55 PM

Introduction

Precautions

Installation

• Install the System in a location with adequate ventilation to prevent internal heat buildup in the System.

DO NOT install the System in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration.

• Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C.

• Leave sufficient distance between the System and the TV.

• Keep the speakers away from the TV to avoid interference with the TV.

Power sources

• When unplugging the System from the wall outlet, always pull on the plug, not the AC power cord.

DO NOT handle the AC power cord with wet hands.

Moisture condensation

Moisture may condense on the lenses inside the System in the following cases:

• After starting to heat the room

• In a damp room

• If the System is brought directly from a cold to a warm place.

Should this occur, the System may malfunction. In this case, leave the System turned on for a few hours until the moisture evaporates, unplug the AC power cord, then plug it in again.

Internal heat

• Make sure there is good ventilation around the unit. Poor ventilation could overheat and damage the unit.

DO NOT block the ventilation openings or holes. If they are blocked by a newspaper or cloth, etc., the heat may not be able to get out.

Others

• Should any metallic object or liquid fall into the System, unplug the AC power cord and consult your dealer before operating any further.

DO NOT disassemble the System since there are no user serviceable parts inside.

Contents

Connections ..............................................................3

Display Indicators ....................................................6

Daily Operations—Playback ..................................7

Daily Operations—Sound & Other Adjustments .....13

Adjusting the Volume ....................................................... 13

Adjusting the Sound.......................................................... 13

Creating 3-dimentional Sound Field—3D Phonic ............ 14

Presetting Automatic DVD Video Sound Increase Level ......14

Adjusting the Audio Input Level ...................................... 14

Adjusting the Audio Output Level.................................... 14

Changing the Display Brightness...................................... 15

Changing the Scanning Mode ........................................... 15

Changing the Picture Tone................................................ 15

Setting the Clock ............................................................... 16

Turning Off the Power Automatically .............................. 16

Unique DVD/VCD Operations .............................17

Selecting the Audio Track................................................. 17

Selecting the Subtitle Language........................................ 18

Selecting the View Angle ................................................. 18

Selecting the Browsable Still Pictures .............................. 18

Playing Back Bonus Group............................................... 18

Making Dialogues Clear—Clear Voice ............................ 19

Special Effect Playback .................................................... 19

Advanced Disc Operations....................................20

Programming the Playing Order—Program Play ............. 20

Playing at Random—Random Play .................................. 21

Playing Repeatedly ........................................................... 22

Prohibiting Disc Ejection—Child Lock ............................ 22

On-screen Disc Operations ............................................... 23

Operations on the Control Screen ..................................... 27

Advanced Tape Operations ..................................29

Recording on a Tape ......................................................... 29

Synchronized Disc Recording........................................... 30

Timer Operations...................................................31

Setup Menu Operations ........................................33

Additional Information .........................................35

Learning More about This System.................................... 35

Troubleshooting ................................................................ 38

Operating JVC’s TVs Using the Remote Control............. 40

Specifications .................................................................... 41

Parts Index ............................................................42

• If you are not going to operate the System for an extended period of time, unplug the AC power cord from the wall outlet.

If anything goes wrong, unplug the AC power cord and consult your dealer.

1


Playable Disc Types

DIGITAL VIDEO SUPER VIDEO

COMPACT

DIGITAL AUDIO

• CD-R/-RW: Recorded in the Audio CD, Video CD and

SVCD formats. MP3, WMA, JPEG, MPEG-1,

MPEG-2, ASF and DivX files written in accordance with the “ISO 9660” format can also be played.

• DVD-R/-RW, +R/+RW: Recorded in the DVD Video format. MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF and DivX files written in the UDF bridge format can also be played.

• DVD-R/-RW/-ROM: Recorded in the DVD Video

Recording (VR) format.

In addition to the above discs, this System can playback audio data recorded on CD-Extra.

• The following discs cannot be played back:

DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD,

CD-G (CD-Graphics) and DVD/CD Text.

Playing back these discs will generate noise and damage the speakers.

• In this manual, “file” and “track” are interchangeably used for MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF and

DivX operations.

• It is possible to playback finalized +R/+RW (DVD format only) discs. “DVD” lights on the front display panel when a +R/+RW disc is loaded.

About color system

This System accommodates the NTSC and PAL system and can playback discs recorded in either the NTSC or the PAL system.

• To change the color system, see page 15.

Note on Region Code

DVD players and DVDs have their own Region Code numbers. This System can playback only DVDs with Region

Code numbers including “4.”

EX.:

When playing a multi-channel encoded DVDs, the System properly converts these multi-channel signals into 2 channels, and emits the downmixed sound from the speakers.

• To enjoy the powerful sound of these multi-channel encoded DVDs, connect a proper decoder or an amplifier with a proper built-in decoder to the DVD OPTICAL

DIGITAL OUT terminal on the rear.

IMPORTANT: Before playing a disc, make sure of the following...

• Turn on the TV and select an appropriate input mode on the TV to view the pictures or on-screen displays.

• For disc playback, you can change the initial setting to your preference. See “Setup Menu Operations” on page 33.

If “ ” appears on the TV screen when you press a button, the disc cannot perform the operation you have tried to do.

How to Read This Manual

• Button and control operations are explained in the table

• below.

Some related tips and notes are explained later in the sections “Learning More about This System” and

“Troubleshooting,” but not in the same section explaining the operations ( INFO content has some information).

indicates that the

Indicates that you press the button briefly.

2

sec.

Remote

ONLY

Main Unit

ONLY

Indicates that you press the button repeatedly selected.

Indicates that you press and hold for a specified period.

briefly and

until an option you want is

Indicates that you press one of the buttons.

the button

Indicates that you turn the control toward the specified direction(s).

Indicates that this operation is only possible using the remote control.

Indicates that this operation is only possible using the main unit.

Audio formats

The System can playback the following digital audio formats.

• LPCM (Linear PCM), DIGITAL (Dolby Digital),

DTS (Digital Theater Systems), MLP (Meridian Lossless

Packing)

“DVD Logo” is a trademark of DVD Format/Logo

Licensing Corporation registered in the US, Japan and other countries.

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of the Non-DVD side of a DualDisc in this product is not recommended.

2


Connections

Do not connect the AC power cord until all other connections have been made.

• Connect VIDEO OUT directly to the video input of your

TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back a copyprotected disc. Connecting VIDEO OUT to an integrated

TV/VCR system may also interfere with your viewing.

Rear panel

Supplied accessories

Check to be sure that you have all the following items.

• FM antenna (x1)

• AM loop antenna (x1)

• Composite video cord (x1)

• Core filters* (x2)

• Remote control (x1)

• Batteries (x2)

If any item is missing, consult your dealer immediately.

~

From the powered subwoofer

See page 4.

Ÿ

From AM/FM antenna

See page 4.

!

From the input of TV/monitor

See page 4.

⁄

From the digital input of digital audio component

See page 5.

@

From the speakers

See page 5.

¤

To a wall outlet

Plug in the AC power cord only after all connections are complete.

Front panel

Pull down the cover until you hear a clicking sound.

From the PC: See page 12.

From the portable audio device: See page 5.

From the headphones: See page 7.

*

Attaching the core filter to the USB cable, LINE IN and LINE OUT cable to reduce interference

At the front panel

Stopper

Wind firmly the USB cable twice.

Wind firmly the LINE IN and LINE OUT cable once.

• Keep close between the plug and the core filter.

• Do not damage the cable by applying excessive force when winding.

Close the core filter until you hear a clicking sound.

3


~

Powered subwoofer

From the powered subwoofer

(not supplied)

SUB -

WOOFER

OUT

The subwoofer connected can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the LFE signals in DVD multi-channel discs.

• Before plugging the unit to the main supply, make sure that the powered subwoofer is turned off.

Ÿ

AM/FM antenna

To assemble the AM loop antenna

For better AM/FM reception

AM loop antenna (supplied)

Keep it connected.

Vinyl-covered wire

(not supplied)

Extend it horizontally.

FM outdoor antenna

(not supplied)

To connect AM/FM antenna

AM loop antenna

(supplied)

• Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75

Ω

wire with coaxial type connector (IEC or DIN45325).

!

TV/monitor

Connect only component cord at one time.

Red

Blue

FM antenna (supplied)

Extend it so that you can obtain the best reception.

Green Component video cord

(not supplied)

• To select progressive scanning mode (see page 15), use

COMPONENT jacks.

S-video cord (not supplied)

Composite video cord (supplied)

• After connecting a TV, select the proper video signal mode according to the connection method. See “Changing the

Scanning Mode” on page 15.

4


⁄

Digital audio component

Protective cap

When connecting a portable audio device (LINE)

Portable audio device

(Digital Audio Player, etc.)

At the front panel

To the audio output

• Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 34). If the setting is incorrect, loud noise may be generated causing damage to the speakers.

• Digital audio signals are output from this System only when

“DVD/CD” is selected as the source.

@

Speakers

• When connecting the speaker cords, match the polarity of the speaker terminals: red color to (+) and black color to (–).

To the audio input

Portable audio device with the audio input


• By using QP Link (Quick Portable Link), you can easily start playing back a portable audio device on this unit when connecting it to the LINE IN jack. See page 12 for details.

• Connect an audio component to the LINE OUT jack if the component is not equipped with a digital input terminal.

• If an external device is not equipped with a stereo mini plug audio output, use a plug adaptor to convert the stereo mini plug to the corresponding plug of the audio output.

Press and hold

Stereo mini plug

(not supplied)

Preparing the remote control

Insert

Red

Release

From right speaker

CAUTION:

Black

• DO NOT connect more than one speaker to each terminal.

• DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.

From left speaker

R6(SUM-3)/AA(15F)

• Dispose of batteries in the proper manner, according to federal, state, and local regulations.

DO NOT recharge, short, disassemble, heat the battery or dispose of it in a fire.

When using the remote control

Point the top of the remote control toward the remote sensor as directly as possible. If you operate it from a diagonal position, the operating range (approx. 5 m) may be shorter.

5


Display Indicators

The indications on the display tell you a lot of things while you are operating the System.

Before operating the System, be familiar with when and how the indicator illuminates on the display.

1 2 3 4 5 6 7 8 9 p q

MP3 WMA MONO ST TA NEWS INFO A.STBY

1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO

SLEEP

B.S.P. BONUS REC 1 2 3 w e r t y u i o ;

1 Disc tray indicators

• 1–5: Disc tray number indicators.

– Flashing while the disc tray is open.

• (disc tray indicator):

– Lights when the disc is detected.

– Flashing while playing back a disc or the disc tray is open.

– Disappears when there is no disc in the tray.

• : Lights to indicate the current selected disc.

2 QP Link (Quick Portable Link) indicator

• Lights when QP Link is activated.

3 Audio file format indicators

• MP3: lights when an MP3 track is detected.

• WMA: lights when a WMA track is detected.

4 PG/PL indicators

• PG: lights when a DVD-VR formatted disc is called up.

• PL: lights when a playlist recorded on a DVD-VR formatted disc is called up.

5 FM reception indicators

• MONO: lights while receiving an FM stereo station in monaural.

• ST (stereo): lights while an FM stereo station with sufficient signal strength is tuned in.

6 USB indicator

• Lights when “USB” is selected as the source.

7 AHB PRO indicator

• Lights when Active Hyper Bass Pro is activated.

8 S.TURBO (Sound Turbo) indicator

• Lights when Sound Turbo II is activated.

9 A.STBY (Auto Standby) indicator

• Lights when Auto Standby is activated.

• Flashes for about 3 minutes before Auto Standby turns the System off.

p SLEEP indicator

• Lights when the Sleep Timer is activated.

q REC indicator

• Lights while recording.

w Playback mode indicators

• PRGM: lights when Program Play is activated.

• RANDOM: lights when Random Play is activated.

• (repeat)1 DISC A-B ALL GROUP:

–

1

: lights when One Track/Chapter/Step Repeat is activated.

–

–

GROUP

1 DISC

: lights when Group Repeat is activated.

: lights when One Disc Repeat is activated.

– DISC ALL : lights when All Disc Repeat is activated.

– A–B : lights when A-B Repeat is activated.

e Main display

• While listening to radio: Band (or preset number) and station frequency appear.

• While selecting “LINE”: “LINE” appears.

• While selecting “TAPE”: “TAPE” appears.

• While selecting “USB”: “USB AUDIO” appears.

• While playing a disc: current status appears.

r 3D PHONIC indicator t

• Lights when 3D Phonic is activated.

(Clear Voice) indicator

• Lights when Clear Voice is activated.

y PRGR. (Progressive) indicator

• Lights when the progressive scanning mode is selected.

u B.S.P. (Browsable Still Picture) indicator

• Lights when Browsable Still Pictures are detected while playing a DVD Audio disc.

i BONUS indicator

• Lights when a DVD Audio disc with a bonus group is detected.

o Daily Timer indicators

• 1/2/3: lights when a Daily Timer (1, 2, or 3) is on standby; flashes while working or being set.

• : lights when Daily Timer is on standby or is being set.

• REC: lights when the Recording Timer stands by; flashes while working or being set.

; 2 3

(tape direction) indicators

– Lights to indicate the current tape running direction.

– Flashes slowly during playback and recording.

– Flashes quickly while rewinding or fast-forwarding a tape.

6


Daily Operations

—Playback

Remote control

Disc tray selecting buttons

ENTER/SET

TOP MENU/PG

RETURN

2

1 , ¡

QP LINK

SHIFT

1

2

3

TV VOLUME

VOLUME

1

Number buttons

MENU/PL

, , ,

GROUP/TITLE SKIP

4

,

¢

FM/PLAY MODE

3

DVD/CD FM/AM USB LINE

TAPE

MP3 WMA MONO ST TA NEWS INFO

1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP

B.S.P. BONUS REC 1 2 3

In this manual, operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.

1

2

Select the source.

Playback automatically starts if the selected source is ready.

• If you press LINE, start playback on the external component.

3

4

Turn on the power.

The STANDBY lamp on the main unit goes off.

• Without pressing AUDIO, the System turns on by pressing one of the source buttons.

• The System turns on and changes the source to LINE by starting playback on an external device when

QP Link is activated. (See page 12 for details.)

Adjust the volume.

Operate the target source as explained later.

To turn off (standby) the unit

The STANDBY lamp on the main unit lights in red.

• A small amount of power is always consumed even while on standby.

You can reduce power consumption by pressing DISPLAY to turn the display off while on standby.

• When the display is turned off, QP Link does not work.

For private listening

Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

• Disconnecting the headphones will activate the speakers again.

4

DO NOT turn off (standby) the System with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the System or start playback.

7


Listening to the Radio

INFO

Main Unit

ONLY

To set the AM tuner interval spacing

Before operating the tuner, it is required to select the appropriate AM space interval used for your area.

• This is possible only while the System is on standby.

1 Select the AM band.

TUNER FM

TUNER AM

2

Turn off the power.

To select the band (FM or AM)

Remote control: Main unit:

To tune in to a station

While FM or AM is selected...


2 sec.

GROUP/TITLE SKIP

DOWN

2 sec.

UP

3 Select the appropriate AM space interval for your area.

DOWN

AM 9KHZ

(9 kHz interval)

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

• When you repeatedly press the button, the frequency changes step by step.

To stop searching manually, press either button.

Remote

ONLY

If the FM station has poor reception

PAGE

FM/PLAY MODE

(while holding...)

UP

(while holding...)

AM 10KHZ

(10 kHz interval)

The MONO indicator lights on the display. Reception will improve though stereo effect is lost—Monaural reception.

To restore the stereo effect, press the button again (the

MONO indicator disappears).

Remote

ONLY

To preset the stations

You can preset 30 FM and 15 AM stations.

1

2

Tune in to a station you want to preset.

• You can also store the monaural reception mode for FM preset stations if selected.

Activate the preset number entry mode.

ENTER/SET MP3 WMA MONO ST TA NEWS INFO A.STBY

REC

1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

S.TURBO SLEEP


• Finish the following process while the indication on the display is flashing.

8


3 Select a preset number for the station you store.

DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 3

3

DISC 5 A.STANDBY

5

VFP

8

6

SLEEP

9

LINE OUT LEVEL ANGLE

10 0

ZOOM

10

Examples:

To select preset number 5, press

5.


10.


10, 1, then 5.


10, 3, then 0.

• You can also use the

¡

or

1

button.

4 Store the station.

ENTER/SET


REC

1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

S.TURBO SLEEP


Playing Back a Tape

To insert a tape

You can playback type I tapes.

Push Insert Close

To start:

With the tape side facing outside

To stop:

To tune in to a preset station

1 Select the band (FM or AM).

Remote

ONLY

TUNER FM

TUNER AM

2 Select the preset number for the station you stored.

DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 3

3

DISC 5 A.STANDBY

5 6

VFP

8


10 0

SLEEP

9

ZOOM

10

Examples:


5.


10.


10, 1, then 5.


10, 3, then 0.

• You can also use the ¡ or 1 button.

When “TAPE” is not selected as the current source, press twice.

To rewind/fast-forward the tape:

Remote control:

GROUP/TITLE SKIP

Fast-forward the tape.

Rewind the tape.

Main unit:

DOWN

Rewind the tape.

UP


9


Playing Back a Disc

INFO

Before operating a disc, be familiar how a disc is recorded.

• DVD Video/DVD-VR comprises of “ Titles ” which includes “ Chapters ,” DVD Audio/MP3/WMA/MPEG-1/

MPEG-2/ASF/DivX comprises of “ Groups ” which includes “ Tracks ,” JPEG comprises of “ Groups ” which includes “ Files ,” and CD/SVCD/VCD comprises of only

“ Tracks .”

• For playback of MP3/WMA/JPEG/MPEG-1/MPEG-2/

ASF/DivX, see also page 27.

To insert a disc

You can insert a disc while playing another source.

On-screen guide icons

• During DVD Video playback, the following icons may appear on the TV:

At the beginning of a scene containing multi-angle views.

At the beginning of a scene containing multi-audio sounds.

At the beginning of a scene containing multi-subtitles.

• The following icons will be also shown on the TV to indicate your current operation.

, , , , ,

• To deactivate the on-screen guide icons, see “ON

SCREEN GUIDE” in “OTHERS menu” on page 34.

To select a disc

Remote Control:

DISC 1

1

DISC 4

4

DISC 2

2

DISC 5

5

DISC 3

3

Playback starts.

(while holding...)

Main Unit:

• When using an 8 cm disc, place it on the inner circle of the disc tray.

To close the disc tray, press the upper part of the same button. The tray closes and playback starts.

• When current selected disc tray is open, you can use

DVD/CD

3

to close the disc tray and start playback

(depending on how the disc is programmed internally).

• While one of the trays is open, the tray closes automatically by pressing down EJECT for the next tray, then the next tray comes out.

To start: To pause: To stop:

To select a title/group

While playing a disc...

Remote

ONLY

Playback starts.

GROUP/TITLE SKIP

DVD/CD

To release, press

DVD/CD

3

.

• While playing DVD/SVCD/VCD/MP3/WMA/MPEG-1/

MPEG-2/ASF/DivX: This System can store the stop point, and when you start playback again by pressing DVD/CD

3

(even while on standby), it starts from the position where you have stopped—Resume Play. (“RESUME” appears on the display when you stop playback.)

To stop completely while Resume is activated, press

7 twice. (To cancel Resume, see “RESUME” on page 34.)

• When operating the System, the on-screen guide icon

(see the following table) appears on the TV.

(while holding...)

• You can select a title/group directly by pressing a number button after pressing GROUP/TITLE (except for DVD-VR disc).

• Group name appears for MP3/WMA playback.

10


To select a chapter/track

• For VCD/SVCD, cancel PBC (see the right column).


GROUP/TITLE SKIP

• First time you press 4 , you will go back to the beginning of the current chapter/track.

To playback using the disc menu

7

For DVD Video/DVD Audio:

1 Show the disc menu.

TOP MENU/PG

RETURN

MENU/PL

Remote

ONLY

To locate a particular portion


– SLOW + x2 x5

Remote

ONLY x10 x20

2

Select an item on the disc menu.

TV CH

ENTER/SET x60

TV CH x2 x5 x10 x20 x60

• Search speed changes as illustrated above except for MP3/

WMA/DivX discs. For MP3/WMA/DivX discs, search speed and the indications on the TV are different.

• No sound comes out if searching is carried out while showing the moving picture.

To return to normal playback, press DVD/CD

3

.

• For DivX, each time you press the > or < button, you can skip to a scene for 30 seconds or 5 minutes depending on the DivX file.

• With some discs, you can also select items by entering the number using the number buttons.

7

For SVCD/VCD with PBC:

While playing a disc with PBC, “PBC” appears on the display.

When disc menu appears on the TV, select an item on the menu. Playback of the selected item starts.

DISC 1 DISC 2 DISC 3

Examples:

1 2 3 To select number 5, press 5.

DISC 4 DISC 5 A.STANDBY

To select number 10, press 10.

4 5 6

To select number 15, press 10,

SCAN MODE VFP SLEEP

7 8


9

ZOOM

1, then 5.


10 0 10

3, then 0.

Remote

ONLY

To locate an item directly

You can select a title/chapter/track directly and start playback.

• For DVD Video, you can select a title before starting playback , while you can select a chapter after starting playback .

DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 5

5

VFP

8


10 0

DISC 3

3

A.STANDBY

6

SLEEP

9

ZOOM

10

Examples:




1, then 5.


3, then 0.

To move to the next or previous page of the current menu:

GROUP/TITLE SKIP

Moves to the next page.

Moves to the previous page.

To return to the previous menu:

TOP MENU/PG

RETURN

(while holding...)

To cancel PBC, press

7

, then select a track. Playback starts with the selected track.

To reactivate PBC, press

7

(twice if Resume is turned

“ON”), then press DVD/CD

3

.

11


Playing Back a Portable Audio Device

INFO

By using QP Link (Quick Portable Link), you can easily start playing back a portable audio device connected to the LINE

IN jack (see page 5).

• Make sure to set the volume of your portable audio device loud enough so that the System can detect the sound signal.

Remote

ONLY

To activate QP Link

QP LINK

CLOCK/TIMER

QPLINK ON

QPLINK OFF

(while holding...)

When QP Link is activated, connecting a portable device to the LINE IN jack and starting playback performs the following:

• While listening to another source...

Changes the source to LINE automatically. (If you change from LINE to another source, QP Link will be canceled.)

• While the System is on standby...

Turns on the System and activates the LINE source automatically (except when the display is turned off).


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO

SLEEP


Bubbles appear when QP Link works.

While QP Link plays back the device...


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO

SLEEP


Bubbles disappear when the sound signal stops or is too weak.

Playing Back from the PC

INFO

This System is equipped with a USB AUDIO terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC.

When you connect your PC for the first time, follow the procedure below.

• Remember you cannot send any signal or data to your PC from this System.

IMPORTANT

• Always set volume to “VOL MIN” when connecting or disconnecting the other equipment.

How to install the USB drivers

1 Turn on your PC and start running Windows R 98 * ,

Windows R 98SE * , Windows R Me * , Windows R 2000 * , or Windows R XP * .

• If the PC has been turned on, quit all the applications running.

2

Select “USB” as the source.


USB

3 Connect the System to the PC using a USB cable (not supplied).

At the front panel

PC

USB cable

4

• Use “USB series A plug to B plug” cable less than

3 m .

The USB drivers are installed automatically.

To playback sound on the PC

Refer to the manuals supplied with the sound reproduction application installed in the PC.

• Noise and static electricity may stop the sound through the

USB connection. In this case, do the following operations:

– Disconnect and connect the USB cable again

– Restart the music software on your PC

– Turn off and on the System

* Microsoft R , Windows R 98, Windows R 98SE,

Windows R Me, Windows R 2000 and Windows R XP are registered trademarks of Microsoft corporation.

12



—Sound & Other Adjustments

Remote control

VFP

SCAN MODE

LINE OUT LEVEL

A.STANDBY

SLEEP

DIMMER

DISPLAY

, , ,

FADE

MUTING

Remote

ONLY

To drop the volume in a moment

To restore the volume, press again, or adjust the volume level.

ENTER/SET

DVD LEVEL

AHB PRO

3D PHONIC

CLOCK/TIMER

SHIFT

SOUND TURBO

Main unit

SOUND

TURBO

BASS/TREBLE

VOLUME

+,–

FADE

MUTING

VOLUME +,–

Adjusting the Sound

INFO

To reinforce the heavy sound

This boosts the low and high frequency sound—Sound

Turbo II.

SOUND

TURBO

TURBO ON

TURBO OFF

• When Sound Turbo II is turned on, AHB Pro is automatically turned on, and cannot be turned off.

(AHB PRO indicator does not light even though the function is turned on.)

To reinforce the bass sound

Remote

ONLY

While Sound Turbo II is off, the richness and fullness of the bass sound is clearly maintained regardless of how you set the volume—Active Hyper Bass Pro.

DVD LEVEL

AHB PRO

AHB ON

AHB OFF

• When Sound Turbo II is turned on, AHB Pro setting cannot be changed.

To adjust the tone

Remote

ONLY

You can adjust the bass and treble level from –3 to +3.

To adjust the bass

Adjusting the Volume

You can adjust the volume level from VOL MIN to level 40

(VOL MAX).


BASS/

TREBLE

BASS TREBLE

Canceled

To adjust the treble

BASS/

TREBLE

VOLUME

BASS TREBLE

Canceled

TV VOLUME

VOLUME

TV VOLUME

VOLUME

TV VOLUME

VOLUME

13


Creating 3-dimentional Sound Field

—3D Phonic

Remote

ONLY

• This does not function for MPEG-1/MPEG-2/ASF/DivX discs.


3D PHONIC

AUDIO/MPX

(while holding...)

3D PHONIC ACTION 3D PHONIC DRAMA

3D PHONIC OFF 3D PHONIC THEATER

• The selected mode can only be shown on the TV.

ACTION Suitable for action movies and sports programs.

DRAMA Creates natural and warm sound. Enjoy movies in a relaxed mood.

THEATER Enjoy sound effects like in a major theater.

Presetting Automatic DVD Video Sound

Increase Level

Remote

ONLY

DVD Video sound is sometimes recorded at a lower level than other discs and sources. You can set the increase level for the currently loaded DVD Video, so you do not have to adjust the volume when you change the source.

• This only functions for DVD Video and DVD-VR format disc.

DVD LEVEL

AHB PRO

NORMAL MEDIUM

HIGH

(initial setting)

(while holding...)

NORMAL

MEDIUM

HIGH

Original recording level.

Output level is increased (less than “HIGH”).

Output level is increased (more than

“MEDIUM”). (initial setting)

Adjusting the Audio Input Level

Remote

ONLY

If the sound from the component connected to the LINE IN jack is too loud or is too quiet when changing from another source to LINE, you can change the audio input level through the LINE IN jack (without changing the volume level).

2 sec.

ENTER/SET

L.IN LVL1 L.IN LVL2

L.IN LVL3

(initial setting)

L.IN LVL1

L.IN LVL2

L.IN LVL3

Select this when the sound is too loud with “L.IN LVL 2” selected. This setting is recommended when connecting an audio device other than a portable audio device to the LINE IN jack.

Select this when the sound is too loud with “L.IN LVL 3” selected.

Select this when listening to a portable audio device or recording the sound from it (initial setting).

Adjusting the Audio Output Level

Remote

ONLY

If the recorded sound on the device connected to the LINE

OUT jack is too loud or too quiet, you can change the audio output level through the LINE OUT jack (without changing the volume level).

LINE OUT LEVEL

10

L.OUT LVL1

(initial setting)

L.OUT LVL2

(while holding...)

L.OUT LVL1

L.OUT LVL2

Select this when recording the sound with a portable audio device (initial setting).

Select this when the recorded sound is too loud with “L.OUT LVL 1” selected.

14


Changing the Display Brightness

You can dim the display window.

TV/VIDEO

DIMMER

DIMMER OFF

(Canceled)

DIMMER ON

AUTO DIM

DIMMER ON Dims the display.

AUTO DIM * Removes the display illumination when starting playback a disc with a video source.

• The display illuminates when playback stops.

* “AUTO DIM” does not work for CD/MP3/WMA.

Changing the Scanning Mode

Remote

ONLY

INFO

This System supports progressive scanning.

Select the video signal mode according to the type of your

TV. If you connect a progressive TV through the VIDEO

OUT jacks, you can enjoy a high quality picture from the built-in DVD player by selecting “NTSC PROG” or

“PAL PROG.”

SCAN MODE

7

PAL PAL PROG

NTSC PROG NTSC

(while holding...)

NTSC

NTSC PROG

PAL

PAL PROG

ENTER/SET

Select for a conventional NTSC TV.

Select for a progressive NTSC TV.

Select to enjoy a progressive scanned picture through the Video Component out terminal.

Select for a conventional PAL TV.

Select for a progressive PAL TV.


Changing the Picture Tone

TV CH

Remote

ONLY

• While showing a playback picture on the TV, you can select a preset picture tone, or adjust it and store your own taste.

To select a preset picture tone

1 While playing, display VFP setting screen.

VFP

8

NORMAL

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

0

0

0

0

0

0

(while holding...) On the TV

2 Select a preset picture tone.

NORMAL CINEMA

USER2 USER1

NORMAL

CINEMA

USER1/USER2

Normally select this.

Suitable for a movie source.

You can adjust parameters and can store the settings.

To remove the screen, press VFP again while holding

SHIFT, or wait for more than 5 seconds.

To adjust the picture tone

1

2

Select “USER1” or “USER2.”

• Follow steps 1 and 2 explained above.

Select a parameter you want to adjust.

TV CH

ENTER/SET

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

Adjust if the neutral color is bright or dark (–3 to +3).

Adjust if the entire picture is bright or dark (–8 to +8).

Adjust if the far and near positions are unnatural (–7 to +7).

Adjust if the picture is whitish or blackish (–7 to +7).

Adjust if the human skin color is unnatural (–7 to +7).

Adjust if the picture is indistinct

(–8 to +8).

Continued on the next page

15


3 Adjust the parameter.

TV CH

ENTER/SET

Turning Off the Power Automatically

Remote

ONLY

Auto Standby

TV CH

4 Repeat steps 2 to 3 to adjust other parameters.

To erase the screen, press VFP again while holding SHIFT, or wait for more than 5 seconds.

Setting the Clock

Remote

ONLY

Without setting the built-in clock, you cannot use Daily

Timers (see page 31) and Sleep Timer.

• To correct a mis-entry during the process, press CANCEL or CLOCK/TIMER. You can return to the previous step.

1

Activate the clock setting mode.

QP LINK

CLOCK/TIMER

INFO


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO SLEEP


A.STANDBY

6

On

Canceled

(while holding...)

When Auto Standby is in use, the A.STBY indicator lights on the display.

When disc play stops, the A.STBY indicator starts flashing.

If no operation is done for about 3 minutes while the indicator is flashing, the System turns off (on standby) automatically.

Sleep Timer

You can set the shut-off time so that you can go to bed without turning it off yourself.

1 Specify the time (in minutes).

2

• If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.

Set the time.

• Adjust the hour and press ENTER/SET, then adjust the minute and press ENTER/SET.

ENTER/SET


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.


SLEEP

9

(while holding...)

10 20 30 60 90 120 150

Canceled

2 Wait until the set time disappears.

To check the time remaining until the shut-off time, press

SLEEP while holding SHIFT.

• If you press the button repeatedly, you can change the shut-off time.

Now the built-in clock starts working.

To check the current clock time during play

DISPLAY

CANCEL

16

(while holding...)

Disc type

*

Clock

Source information

* This appears depending on the disc type.


Remote control

Number buttons

ANGLE

, , ,

DVD/CD 3

8

SLOW ,

AUDIO/MPX

SHIFT

Unique DVD/VCD Operations

Selecting the Audio Track

Remote

ONLY

INFO

For DVD Video/DivX: While playing back a chapter containing audio languages, you can select the language to listen to.

For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.

For DVD-VR and SVCD/VCD: When playing back a track, you can select the audio channel to play.

• You can also select the audio track using the on-screen bar

(see page 23).

3D PHONIC

AUDIO/MPX

ZOOM

ENTER

/SET

7

PAGE

C.VOICE

SUBTITLE

While playing a DVD Video...

Ex.:

1/3

ENGLISH

2/3

FRENCH

1/3

ENGLISH

2/3

FRENCH

3/3

JAPANESE

3/3

JAPANESE

While playing a DVD Audio/DivX...

Ex.:

1/3 2/3

1 2

3/3

3

While playing a DVD-VR, or SVCD/VCD...

3D PHONIC

AUDIO/MPX

SVCD

ST1

R2

DVD-VR/VCD

ST

ST2

L2

L R

L1

R1

ST1/ST2/

ST

L1/L2/L

R1/R2/R

To listen to normal stereo (2-channel) playback.

To listen to the left audio channel.

To listen to the right audio channel.

• SVCD can have 4 audio channels. SVCD usually uses these 4 channels to record two 2-channel recordings

(ST1/ST2).

17


Selecting the Subtitle Language

Remote

ONLY

For DVD Video/DivX: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV.

For DVD-VR: While playing, you can turn the subtitles on or off.

For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc.

• You can also select the subtitle language using the onscreen bar (see page 23).

While playing a DVD Video/DivX...

1

C. VOICE

SUBTITLE

1/3

ENGLISH

1/3

ENGLISH

Selecting the View Angle

Remote

ONLY

For DVD Video only: While playing back a chapter containing multi-view angles, you can view the same scene from different angles.

• You can also select the multi-view angles using the onscreen bar (see page 23).

While playing...

Ex.:

1/3

1

(while holding...)

2/3

2

ANGLE

0

3/3

3

1/3

1

2/3

2

3/3

3

2

TV CH

Ex.:

1/3

ENGLISH

1/3

ENGLISH

TV CH

2/3

FRENCH

2/3

FRENCH

While playing a DVD-VR...

C. VOICE

SUBTITLE

ON

ON

While playing an SVCD...

C. VOICE

SUBTITLE

3/3

3/3

JAPANESE

OFF

OFF

Selecting the Browsable Still Pictures

Remote

ONLY

For DVD Audio only: While playing back a track linked to browsable still pictures (B.S.P.), you can select the still picture (turn the page) to be shown on the TV screen.

• If a track is linked to browsable still pictures (B.S.P.), they are usually shown automatically during playback.

• You can also select the page using the on-screen bar

(see page 23).

(while holding...)

PAGE

FM/PLAY MODE

Each time you press the button (while holding SHIFT), the still picture changes one after another

(if available).

Playing Back Bonus Group

Remote

ONLY

For DVD Audio only: Some DVD Audio discs have a special group called “bonus group” whose contents are not open to the public.

• To playback a bonus group, you have to enter the specific

“key number” (a kind of password) for the bonus group.

The way of getting the key number depends on the disc.

1

Select the bonus group.

• The bonus group is usually recorded as the last group

(for example, if a disc contains 4 groups including a bonus group, “group 4” is the bonus group).

• For how to select the group, see “To select a title/group” on page 10.

18


2 Enter the key number.

DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 3

3

DISC 5 A.STANDBY

5

VFP

6

SLEEP

9 8

ANGLE

0

ENTER/SET

3 Follow the interactive instructions shown on the screen.

To cancel the key number entry, press

7

.

Making Dialogues Clear—Clear Voice

Remote

ONLY

When you playback a disc, you can use this function—Clear

Voice. You can make the singer’s voices or dialogues of the movie clear.

• This function only works when 3D Phonic is activated.

C. VOICE

SUBTITLE

3D PHONIC

(On)

Off

(while holding...)

Special Effect Playback

Pause playback

To pause:

While playing...

Remote

ONLY

To resume normal playback:

DVD/CD

INFO

Slow-motion playback


1 While playing...

Still picture playback starts.

2 Select slow motion speed.

– SLOW

+

Forward slow motion starts.

1/32 1/16 1/8 1/4 1/2

Reverse slow motion

* starts.

1/32 1/16 1/8 1/4

*Only available for DVD Video.

To resume normal playback, press DVD/CD 3 .

1/2

To replay the previous scenes

(One-Touch Replay)

• This function is only used while playing DVD Video/

DVD-VR.

While playing back...

GROUP/TITLE

The playback position moves back about 10 seconds before the current position (only within the same title).

Zoom

• For JPEG, see page 28.

1 While playing back...

ZOOM

10

ZOOM 1 ZOOM 2 ZOOM 3 ZOOM 4

ZOOM OFF ZOOM 6 ZOOM 5

Frame-by-frame playback



(while holding...)

• As the number increases, magnification also increases.

2

Move the zoomed-in position.

TV CH

2 Advance the still picture frame by frame.

TV CH


To cancel Zoom, press ZOOM (while holding SHIFT) repeatedly until “ZOOM OFF” appears on the TV.

19


Remote control

Number buttons

ZOOM

TOP MENU/PG

, , ,

DVD/CD

3

8

¡

REPEAT A-B

REPEAT

SHIFT

Main unit

DVD/CD 8

DVD/CD #

EJECT

Advanced Disc Operations

CANCEL

MENU/PL

ENTER/SET

ON SCREEN

7

4 , ¢

FM/PLAY

MODE

Programming the Playing Order—

Program Play

Remote

ONLY

INFO

You can arrange the playing order of the chapters or tracks

(up to 99) before you start playback.

• Program play cannot be used for DVD-VR/JPEG/

MPEG-1/MPEG-2/ASF/DivX.

• Resume does not work for Program Play.

1

Before starting playback, activate Program Play.

PAGE

FM/PLAY MODE

PROGRAM

Canceled

RANDOM


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP


On the display

4 , 7 , ¢

PROGRAM

No

1

2

9

10

6

7

8

3

4

5

Disc Group/Title Track/Chapter

USE NUMERIC KEYS TO PROGRAM TRACKS.

USE CANCEL TO DELETE THE PROGRAM.

On the TV

2

Select chapters or tracks you want for Program Play.

• For DVD Video/DVD Audio/MP3/WMA:

1 Select a disc number.

2 Select a title or group number.

3

4

Select a chapter or track number.

Repeat the above steps 1 to 3 .

• For SVCD/VCD/CD:


2

3

Select tracks.

Repeat the above steps 1 and 2 .

To enter the numbers directly:

DISC 1

1

7

DISC 2

2

DISC 3

3

DISC 4

4

SCAN MODE

DISC 5 A.STANDBY

5

VFP

6

SLEEP

8 9


10 0

ZOOM

10

Examples:

To enter number 5, press 5.


To enter number 15, press 10,

1, then 5.


3, then 0.

20


3 Start playback.

DVD/CD

Playback starts in the order you have programmed.

To skip a step:

GROUP/TITLE SKIP

To pause: To stop:

Playing at Random—Random Play

Remote

ONLY

You can play all chapters or tracks at random.

• Random Play cannot be used for DVD-VR/JPEG/

MPEG-1/MPEG-2/ASF/DivX and some DVDs.

1 Before starting playback, activate Random Play.

PAGE

FM/PLAY MODE

PROGRAM RANDOM

Canceled

To release, press

DVD/CD

3

.

To check the programmed contents

Before or after playback...

TV CH

In the reverse order.

TV CH

In the programmed order.

• You can also use

4

or

¢

to check the programmed contents.

To modify the program


To erase the last track:

To erase the entire program:

To add another track to the program:

Repeat step 2 .

DISPLAY

CANCEL

To exit from Program Play


PAGE

FM/PLAY MODE

PROGRAM RANDOM

Canceled


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP



DVD/CD

Playback starts in random order.

Random Play ends when the entire disc has been played.

To skip a chapter/ track:


To go to the beginning of the current track, press

4

.

To release, press

DVD/CD 3 .

To exit from Random Play


PAGE

FM/PLAY MODE

PROGRAM RANDOM

Canceled

21


Playing Repeatedly

Remote

ONLY

INFO

• You can also select the repeat mode using the on-screen bar

(see pages 24 and 25).

• For MP3/WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX, see page 28.

Repeat Play

You can repeat playback.

• For DVD Video/Audio:

While playing...

REPEAT A-B

REPEAT

Canceled

1 GROUP

DISC ALL

• For CD/SVCD/VCD:

While playing (without PBC for SVCD/VCD) or before playback...

REPEAT A-B

REPEAT 1 1 DISC

Canceled DISC ALL

• For DVD-VR:

While playing an original program...

REPEAT A-B

REPEAT

1 GROUP 1 DISC

A-B Repeat

You can repeat playback of a desired portion by specifying the beginning (point A) and the ending (point B).

• A-B Repeat cannot be used for MP3/WMA/MPEG-1/

MPEG-2/ASF/DivX and for some DVDs.

1 While playing (without PBC for SVCD/VCD), select the start point (A).

REPEAT A-B

REPEAT

appears on the display.

• A appears on the

TV if the TV is turned on.

(while holding...)

2 Select the end point (B).

(while holding...)

REPEAT A-B

REPEAT


•

TV.

A-B appears on the

• You can search for the end point using the

¡ button.

To cancel A-B Repeat, press REPEAT A-B again while holding SHIFT.

• A-B Repeat will also be canceled when you stop play or skip the chapter or track.

Canceled DISC ALL

While playing a playlist...

REPEAT A-B

REPEAT 1

Canceled

GROUP

DISC ALL

1

GROUP

1 DISC

DISC ALL

Repeats the current chapter/track.

Repeats the current title (for DVD Video)/ group (for DVD Audio)/title of PG or PL (for

DVD-VR).

Repeats the current disc.

Repeats all discs.

Prohibiting Disc Ejection—Child Lock

Main Unit

ONLY

You can lock the disc trays so that no one can eject the loaded disc.


While the disc trays are closed...

(while holding...)


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.


To cancel the prohibition, repeat the same procedure.

“UNLOCKED” appears on the display.

22


On-screen Disc Operations

Remote

ONLY

INFO

You can check the disc information and use some functions through the on-screen bar.

On-screen bars

DVD Video

1

DVD-VIDEO

Dolby D

3/2.1ch

2

DISC 1

CHAP.

TITLE 14 CHAP 23

1 / 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

3

4

DVD Audio

1 2

DVD-AUDIO

TIME

LPCM

2/0.0ch

OFF

DISC 1

TRACK

GROUP 14 TRACK 23 TIME 0:00:58

1 / 3 PAGE 1 / 3

3

4

DVD-VR

1 2 3

DVD-VR

TIME

Dolby D

2/0.0ch

OFF

DISC 1 PG 2 CHAP 3 TOTAL 0:00:58

CHAP.

ST ON

4

SVCD

1

SVCD

2

TITLE 14

/ 1/3

CHAP 23

1/3

TOTAL 1:25:58

1/3

3

4

VCD

1 2 3

VCD TITLE 14 CHAP 23

1/3

TOTAL 1:25:58

1/3

4

CD

1 2 3

CD TITLE 14 CHAP

1/3

23

1/3

TOTAL 1:25:58

1/3

4

MP3/WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX

1 2 3

FILE CHAP 23 TOTAL 1:25:58

On-screen Bar Information

1 Disc type

2 Playback information

Indication Meanings

Dolby D, LPCM Audio format

3/2.1ch, 2/0.0 ch Channel number

DISC 1

TITLE 2

CHAP 3

GROUP

PG 2

PL 2

1

TRACK 14

TOTAL 1:25:58

Current disc

Current title

Current chapter

Current group

Current title of original program

Current title of playlist

Current track

Time indications

3 Operation modes


Playback

/

/ Forward/Reverse search

Forward/Reverse slow-motion

Pause

Stop

4 Function icons (on the pull-down menu)

Indication

TIME

OFF

Meanings

Select to change the time indication.

Select to repeat playback.

CHAP.

TRACK

1/3

1/3

1/3

PAGE 1 / 5

Select for time search.

Select for chapter search.

Select for track search.

Select to change the audio language or channel (see also page 17).

Select to change subtitle language

(see also page 18).

Select to change the view angle

(see also page 18).

Select to change the page (see also page 18).

23


To operate using the On-screen Bar

Ex.: Selecting a subtitle (French) for DVD Video

While a disc is selected as the source...

1 Display the entire on-screen bar.

ON SCREEN

DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 2 CHAP 3 TIME 0:00:58

DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14 CHAP 23

CHAP.

1 1/3 1 / 1/3

TOTAL 1:25:58 disappears

* This does not appear for MP3/WMA/JPEG/MPEG-1/

MPEG-2/ASF/DivX discs.

*

2 Select (highlight) the item you want.

For detailed operations of the following functions, see also “To operate using the On-screen Bar” on the left.

To change the time information

You can change the time information in the on-screen bar and the display window on the main unit.

1 While playing, display the on-screen bar with the pull-down menu.

DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14

CHAP.

1 /

CHAP

1/3

23

1 / 1/3

TOTAL 1:25:58

1 1/3

2

3

Make sure TIME is selected (highlighted).

Change the time indication.

ENTER/SET

TIME 0:00:58

T. REM 0:35:24

REM 0:11:23

TOTAL 1:01:58

DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14

CHAP.

1 /

CHAP

1/3

23

1 / 1/3

TOTAL 1:25:58

1 1/3

3 Display the pop-up window.

ENTER/SET

DISC 1

CHAP.

TITLE 2 CHAP 23 TOTAL 1:25:58

1 1/3 1 / 1/3 1 1/3

ENGLISH

4 Select the desired option in the pop-up window.

TV CH

DISC 1 TITLE 14

CHAP.

1

CHAP

1/3

23

2 / 1/3

TOTAL 1:25:58

1 1/3

TV CH

FRENCH

5 Finish the setting.

ENTER/SET

Pop-up window disappears.

To remove the on-screen bar

ON SCREEN

TIME

REM

TOTAL

T.REM

Elapsed playing time of the current chapter/track (except for DVD-VR).

Remaining time of the current chapter/ track (except for DVD-VR).

Elapsed disc time.

Remaining disc time.


ON SCREEN

Repeat Play

• See also page 22.

2

3

1 While playing a disc (without PBC for SVCD/VCD), display the entire on-screen bar.

• Repeat Play can be selected before starting playback, except for DVD Video/DVD-VR.

Display the pop-up window.

DVD-VIDEO

Dolby D

3/2.1ch


CHAP.

1 / 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

OFF

24


4 Select the repeat mode you want.

A-B Repeats a desired portion (see below).

TITLE Repeats the current title.

GROUP

DISC

Repeats the current group.


ALL Repeats all discs (except for DVD).

CHAPTER * Repeats the current chapter.

TRACK *

PG

PL

OFF

Repeats the current track.

Repeats the current title of original program (for DVD-VR only) (see also page 22).

Repeats the current title of playlist (for

DVD-VR only) (see also page 22).

Cancels Repeat Play.

* During Program Play and Random Play, “STEP” appears.


ENTER/SET

A-B Repeat


1

2

3

While playing, display the entire on-screen bar.


DVD-VIDEO

Dolby D

3/2.1ch


CHAP.

1 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

4

Select “A-B.”

TV CH

TV CH

OFF

DVD-VIDEO

Dolby D

3/2.1ch

A–B

DISC 1 TITLE 14 C

CHAP.

1 1/3

To cancel A-B Repeat, repeat steps 1 to 3 , and select “OFF” in step 4 .

Time Search

You can move to a particular point by specifying the elapsed playing time from the beginning.

2

3

1 While playing (without PBC for SVCD/VCD), display the entire on-screen bar.

• Time Search can be used before starting playback, except for DVD Video/DVD-VR.

Select .


DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14

CHAP.

TIME _ : _ _ : _ _

1 /

CHAP

1/3

23

1 / 1/3

TOTAL 1:25:58

1 1/3

4 Enter the time.

You can specify the time in hours/minutes/seconds.

DISC 1

1

DISC 4

7

DISC 2

2

DISC 3

3

4

SCAN MODE

DISC 5 A.STANDBY

5

VFP

8

6

SLEEP

9

ANGLE

0

Examples:

To move to a point of 1

(hours): 02 (minutes): 00

(seconds), press 1, 0, 2, 0, then 0.


(minutes): 00 (seconds), press 0, 5, 4, 0, then 0.

• It is always required to enter the hour digit (even “0” hour), but it is not required to enter trailing zeros (the last two digits in the examples above).

• To correct a mis-entry, press Cursor < to erase the last entry.

5

Finish the setting.

ENTER/SET

The System starts playing the disc from the selected playing time.

5 Select the start point (A).

ENTER/SET

DVD-VIDEO

A-

Dolby D

3/2.1ch

DISC 1 TITLE 14 CH

CHAP.

1 / 1/3

6

Select the end point (B).

ENTER/SET

A-B Repeat starts. The selected portion plays repeatedly.

• Before pressing ENTER/SET, you can search for the end point using the

¡

button.

Chapter/Track Search

You can search for the chapter (DVD Video/DVD-VR) or track (DVD Audio) number to play.

1

2

3


Select CHAP.

or TRACK


.

DVD-VIDEO

Dolby D

3/2.1ch

OFF


CHAP.

CHAPTER _

1 / 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

25


4 Enter the desired chapter/track number.

DISC 1

1

DISC 4

7

DISC 2

2

DISC 3

3

4

SCAN MODE

DISC 5 A.STANDBY

5

VFP

8

6

SLEEP

9

ANGLE

0

Examples:

To select chapter/track 5, press 5.

To select chapter/track 10, press 1, then 0.



• To correct a mis-entry, press the number keys until the desired number shown in the pop-up window.

5


ENTER/SET

The System starts playing the searched chapter or track.

Control screen for DVD-R/-RW in DVD-VR format

The control screen is superimposed on the TV screen when you call up Program List (PG) or playlist (PL).

To select playback type

To select the Program

List:

To select the playlist:

MENU/PL TOP MENU/PG

RETURN

To remove the list, press the same button again.

Ex.: When Program List is selected.

ORIGINAL PROGRAM

No Date

1 03/12/06

2 09/12/06

3 18/12/06

4 20/12/06

5 25/12/06

6 28/12/06

Ch

L

L

L

L

L

L

Time

12:15

23:05

08:17

07:47

19:38

14:20

Title

La fleur

The last struggle free flyer

BOOM!

Mr. Lawrence

Satisfy U

Browsable Still Pictures


For DVD Audio only: While playing back a track linked to browsable still pictures (B.S.P.), you can select the still picture (turn the page) to be shown on the TV.


2

3

1

While playing a DVD Audio, display the entire onscreen bar.


DVD-AUDIO

TIME

LPCM

2/0.0ch

OFF

DISC 1

TRACK


1 / 3 PAGE 1 / 5

1

4 Select a still picture you want.

TV CH

TV CH

OUP 14 TRACK 23 TIME 0:00:58

1 / 3 PAGE 3 / 5

3


ENTER/SET

1 2 3 4

Ex.: When playlist is selected.

5

PLAY LIST

No Date Chap Length

1 03/12/06 002 0:23:24

2 15/12/06 004 1:04:39

3 24/12/06 013 0:41:26

4 27/12/06 017 0:09:08

Title

Nebula G.

CDJ

Secret Garden

S. Walker

6

1 2 7 8

1

2

3

4

5

6

7

8

Listed number

Recording date

Recording channels

Recording time

Title

Highlight bar (current selection)

Chapters included

Playback time

To select an item in the list and start playback

TV CH

ENTER/SET

6

TV CH

26


Operations on the Control Screen

Remote

ONLY

INFO

You can search for and play the desired items through the control screen for MP3/WMA/JPEG/MPEG-1/MPEG-2/

ASF/DivX discs.

Control screen for MP3/WMA/JPEG/MPEG-1/

MPEG-2/ASF/DivX discs

The control screen automatically appears on the TV screen when you load an MP3, WMA JPEG, MPEG-1, MPEG-2,

ASF or DivX disc.

Ex.: When the MP3 disc is loaded.

1

6

7

8

9

2

3

4

Group : 2 / 3

Spring

Summer

Fall

Winter

Track Information

Title

Rain

Artist

Album

REPEAT TRACK TIME : 00:00:14

Track : 6 / 14 (Total 41)

Cloudy.mp3

Fair.mp3

Fog.mp3

Hail.mp3

Indian summer.mp3

Rain.mp3

Shower.mp3

Snow.mp3

Thunder.mp3

Typhoon.mp3

Wind.mp3

Winter sky.mp3

0

-

5

1

2

3

4

5

6

7

8

9

0

-

Current group number/total group number

Current group

Group list

Track information (ID3 Tag Version 1.0: only for

MP3/WMA)

Current track

Repeat Play setting

Elapsed playing time of the current track

(except for JPEG)

Operation mode icon

Current track number/total number of tracks in the current group (total number of tracks on the loaded disc)

Highlight bar

Track list

• If files of different types (MP3, WMA, JPEG,

MPEG-1, MPEG-2, ASF and DivX) are recorded on a disc, select the file type to play (see page 33).

To move the highlight bar between group list and track list

To start playback

For JPEG:

ENTER/SET

Moves the bar to the track list.

Moves the bar to the group list.

To select an item in the list

TV CH

TV CH

Move the highlight bar to the desired item.

• If you move the highlight bar while playing back an MP3/

WMA file or DVD-VR (PG/PL) disc, the selected track starts playback automatically.

The selected track (still picture) is displayed until you change it.

DVD/CD

Slide-show playback starts.

Each track (still picture) is shown on the screen for about 3 seconds, then changes one after another.

For the other files:

ENTER/SET

Playback starts with the selected track.

• Pressing DVD/CD

3 starts playback.

also

• Once you start playing back a JPEG/MPEG-1/MPEG-2/

ASF/DivX track, the control screen disappears.

• To cancel slide-show and display the current still picture, press

8

.

27


To select a group (for MP3/WMA/JPEG/MPEG-1/

MPEG-2/ASF/DivX):

GROUP/TITLE SKIP

To zoom in the JPEG files

• You cannot zoom in the still picture during slide-show.

• For other discs, see page 19.

1 While playing back a still picture...

• During slide-show, press

8

to display the still picture, then...

(while holding...)

To skip a track:

GROUP/TITLE SKIP

To stop playback:

ZOOM

10

ZOOM 1

ZOOM OFF

ZOOM 2

(while holding...)

2 Move the zoomed-in position.

TV CH

• You can select a group directly by pressing a number button after pressing GROUP/TITLE (except for DVD-VR disc).

To repeat MP3/WMA playback

While playing or before playback...

REPEAT A-B

REPEAT

1 GROUP 1 DISC

TV CH


Canceled DISC ALL

To repeat slide-show for JPEG


REPEAT A-B

REPEAT GROUP

Canceled

1 DISC

DISC ALL

To repeat MPEG-1/MPEG-2/ASF/DivX playback


REPEAT A-B

REPEAT

1 GROUP 1 DISC

Canceled

DISC ALL

1

GROUP

1 DISC

DISC ALL




Repeats all discs.

28


Remote control

FM/AM

DVD/CD 3

7

Main unit

Advanced Tape Operations

IMPORTANT

It may be unlawful to record or playback copyrighted material without the consent of the copyright owner.

Recording on a Tape

INFO

You can use type I tapes for recording.

• To play a tape, see page 9.

1 Insert a recordable cassette.

Push Insert Close

USB

LINE

TAPE


2 Select and start playing the source—“FM,” “AM,”

“DVD/CD,” “USB,” or “LINE.”

• When recording a disc, you can also use “Synchronized

Disc Recording” (see page 30).

3 Start recording.

REC

To stop recording:

On the main unit

PUSH OPEN

0

REC

DVD/CD

8

DVD/CD #

FM/AM

TAPE

7

USB

LINE

29


Synchronized Disc Recording

INFO

You can start and stop both disc play and tape recording at the same time.

To record the entire disc

1 Load a disc and insert a recordable cassette.

• If the current playing source is not the disc player, press

DVD/CD

3

, then

7

.


REC

The System automatically creates 4-second blanks between the tunes recorded on the tapes.

On the main unit

• When either disc play* or recording ends, both disc player and the cassette deck stop at the same time.

* For DVD Video: When a title is finished playing.

To record Program Play

1 Select Program Play (and make a program), but do not start playback.

2 Press REC to start recording.

• When disc play stops, recording stops automatically.

To record only your favorite track

You can specify tracks to be recorded on the tape while listening to a disc (except for DVD Video/DVD-VR).

1 Start playing a disc.

DVD/CD

2 While a track you want to record on the tape is playing...

REC

On the main unit

The disc player returns to the beginning of that track and the track is recorded on the tape.

After recording the track, the disc player and cassette deck automatically stop.

3 Repeat steps 1 and 2 to record other tracks you want.

• You can change the disc if necessary.

To protect your recording

Cassettes have two small tabs on the back to protect from unexpected erasure or re-recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with adhesive tape.

30


Remote control

,

Timer Operations

1 Select one of the timer setting modes you want to set—

REC TIMER (Recording Timer) ON time, DAILY 1

ON time, DAILY 2 ON time or DAILY 3 ON time.

QP LINK

CLOCK/TIMER

AUDIO

CANCEL

ENTER/SET

Recording Timer

REC TIMER

ON (Time)

Canceled

Daily Timer 1

DAILY 1

ON (Time)

Clock setting

(see page 16)

Daily Timer 2

DAILY 2

ON (Time)

ON (Time)

DAILY 3

Daily Timer 3


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.


CLOCK

/TIMER

Ex. When Daily Timer 1 setting mode is selected

2

• When the clock has not been set, pressing CLOCK/

TIMER makes the System enter the clock setting mode.

Make the timer setting as you want.

Repeat the procedure for the following settings until finished:

ENTER/SET

Setting the Timer

Remote

ONLY

INFO

Using Daily Timer, you can wake up with your favorite music. On the other hand, with Recording Timer, you can make a tape of a radio broadcast or the sound from LINE IN automatically.

You can store three Daily Timer settings and one Recording

Timer setting; however, you can activate only one of the timers at the same time.

• To exit from the timer setting, press CLOCK/TIMER as required.

• To correct a mis-entry during process, press CANCEL.

You can go back to the previous step.

Recording Timer and Daily Timer initial settings when shipped from the factory

• REC TIMER: ON Time (6:00)/OFF Time (10:00)/

Source (TUNER FM 1)/Volume level (– –)

• DAILY 1: ON Time (6:00)/OFF Time (8:00)/






For Recording Timer:

1 Set the hour then the minute for on-time.

2

3

Set the hour then the minute for off-time.

Select the playback source—“TUNER-FM,”

4

“TUNER-AM,” or “LINE IN.”

For “TUNER-FM” and “TUNER-AM”: Select a

5 preset channel.

Select the volume level.

• You can adjust the volume level

(“0” to “40” and “VOL – –”).

If you select “VOL – –,” the volume is set to the last level when the unit has been turned off.

For Daily Timers:


2 Set the hour then the minute for off-time.

3 Select the playback source—“TUNER-FM,”

“TUNER-AM,” “TAPE,” “DISC,” or “LINE IN.”

1 DISC ALL A–B

GROUP RANDOM


QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP


4 For “TUNER-FM” and “TUNER-AM”: Select a preset channel.

For “DISC”: Select the disc tray number, the title/ group number, then the chapter/track number.

31


3

5 Select the volume level.


(“0” to “40” and “VOL – –”).


Once settings are complete, the Timer setting information appears in sequence.

• This function is not available for VCD with PBC activated.

Turn off the unit (on standby) if you have set the on-time.

To turn on or off the Timer

Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days.

To cancel the Timer

1 Select the Timer (REC TIMER, DAILY 1, DAILY 2, or DAILY 3) you want to cancel.

QP LINK

CLOCK/TIMER

Recording Timer

REC TIMER

ON (Time)

Canceled

Daily Timer 1

DAILY 1

ON (Time)

Clock setting

(see page 16)

Daily Timer 2

DAILY 2

ON (Time)

ON (Time)

DAILY 3

Daily Timer 3


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.


Ex. To cancel Daily

Timer 1

2 Turn off the selected Timer.

DISPLAY

CANCEL

How Daily Timer works

Once the Daily Timer has been set, the timer indicator

( ) and timer number indicator (1/2/3) are lit on the display. Daily Timer is activated at the same time everyday until the timer is turned off manually (see the next column) or another timer is activated.

When the on-time comes

The System turns on, tunes in to the specified station or starts playing the loaded disc with the specified chapter or track, and sets the volume level gradually to the preset level after about 30 seconds.

• While Daily Timer is working, the timer indicator ( ) and timer number indicator (1/2/3) flash on the display.

When the off-time comes

The System stops playback, and turns off (on standby) automatically.

• The timer setting remains in memory until you change it.

How Recording Timer works

When Recording Timer has been set, Timer ( ) indicator and the REC indicator are lit on the display.

Recording Timer works only once.


The System turns on, tunes in to the specified station or changes the source to “LINE”, and starts recording.


The System stops recording, and turns off (on standby).


To turn on the Timer

1 Select the Timer (REC TIMER, DAILY 1, DAILY 2, or DAILY 3) you want to activate.

QP LINK

CLOCK/TIMER

Recording Timer

REC TIMER

ON (Time)

Canceled

Daily Timer 1

DAILY 1

ON (Time)

Clock setting

(see page 16)

Daily Timer 2

DAILY 2

ON (Time)

ON (Time)

DAILY 3

Daily Timer 3

2 Activate the selected Timer.

ENTER/SET


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO SLEEP


Ex. When Daily Timer 1 (DAILY 1) is activated

3 Wait until the indication disappears.

32


Remote Control

, , ,

SET UP

Setup Menu Operations

INFO

Initial settings

Remote

ONLY

The Setup Menu cannot be activated during playback.

1 Press SET UP.

LANGUAGE

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE

ON SCREEN LANGUAGE

ENGLISH

ENGLISH

ENGLISH

ENGLISH

ENTER/SET

2 or )to select the menu.

3

4

5

) to select the item.

Press ENTER/SET.

) to select the options, then press

ENTER/SET.

• For settings of the LANGUAGE menu, see also

“Language Code List” on page 39.

To remove a preference display

Press SET UP.

LANGUAGE menu

Item

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE


PICTURE menu

Item

MONITOR TYPE

16:9 4:3 LB

Contents

You can select the initial menu language of the DVD Video.

You can select the initial audio language of the DVD Video.

You can select the initial subtitle language of the DVD Video.

You can select “ENGLISH,” “CHINESE,” or “SPANISH” as the on-screen language.

4:3 PS

PICTURE SOURCE

SCREEN SAVER

FILE TYPE

Contents

You can select the monitor type to match your TV when you playback DVD Video discs recorded for wide-screen televisions.

16:9/16:9 MULTI (Wide television screen): For a wide-screen (16:9) TV.

4:3 LB/4:3 MULTI LB (Letter Box conversion): For a conventional (4:3) TV. Displays a wide-screen picture to fit the width of the TV screen keeping the aspect ratio.

4:3 PS/4:3 MULTI PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed in to fill the screen vertically and the left and right sides of the picture are cut off.

• For multi-color system TVs, select the [MULTI] option.

You can obtain optimal picture quality by selecting the source type of the disc contents.

AUTO: Normally, select this option. The System recognizes the picture type (film or video source) of the current disc according to the disc information.

FILM: For a film source disc.

VIDEO: For a video source disc.

You can set the screen saver function to ON or OFF .

If no operation is done for about 5 minutes, the display dims.

You can select the file type to play.

AUDIO: To play MP3/WMA files.

STILL PICTURE: To play JPEG files.

VIDEO: To play MPEG-1, MPEG-2, ASF and DivX files.

33


AUDIO menu

Item

DIGITAL AUDIO OUTPUT

DOWN MIX

D.RANGE COMPRESSION

Contents

Set this item correctly when using the DVD OPTICAL DIGITAL OUT terminal on the rear.

PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals.

DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a builtin Dolby Digital decoder.

STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.

This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to “PCM

ONLY.”

DOLBY SURROUND: Select this when connecting to a surround decoder.

STEREO: Select this when connecting to a stereo receiver, MD player, TV, etc.

Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.

AUTO: You can enjoy powerful playback sound with full dynamic range.

ON: Select this when you want to fully apply the compression effect to make the sound at lower volume clear (useful at midnight).

OTHERS menu

RESUME

Item

ON SCREEN GUIDE

DivX REGISTRATION

Contents

You can select Resume.

ON: The System resumes playback from the position where playback has been stopped if the disc is still in the disc tray.

OFF: Resume is deactivated.

Activate or deactivate the on-screen guide.

The System has its own Registration Code.

If necessary, you can confirm it.

Once you have played back a disc in which the Registration Code is recorded, the System’s

Registration Code is overwritten for copyright protection.

34


Additional Information

Learning More about This System

Connections

(see pages 3 to 5)

• Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.

• Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the System.

• The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.

– When placing the speakers near a TV set, turn off the

TV’s main power switch or unplug it before installing the speakers.

Then wait at least 30 minutes before turning on the TV’s main power switch again.

– Some TVs may still be affected even though you have followed the above instructions. If this happens, move the speakers away from the TV.

• When a portable audio device is connected to the LINE IN jack, sound will come out of the speakers and headphones.

However, no sound will come out of the LINE OUT jack.

Daily Operations—Playback


Listening to the Radio:

• If you store a new station into an occupied preset number, the previously stored station in that number will be erased.

• When you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few days. If this happens, preset the stations again.

Playing Back a Disc:

• On some DVD, SVCD, or VCD discs, the actual operations may be different from what is explained in this manual, due to the programming and disc structure; such differences are not a malfunction of this System.

• When discs* in more than one tray are loaded on the disc trays, they are played in sequence as follows. (When DVD

Video, DVD Audio or SVCD/VCD with PBC is loaded in the System, playback of the disc next to these discs will not start.):

Ex.: When DISC 2 is selected:

DISC 2 ] DISC 3 ] DISC 4 ] DISC 5 ] DISC 1 ]

(then stops)

* When no disc is loaded on the disc tray, that disc number is skipped.

• You can exchange discs while playing or selecting another disc.

• Some DVD Audio discs prohibit downmix. When you playback such a disc, “LR ONLY” appears on the display and the System plays back the left front and right front signals.

• When playing back a DVD Audio disc recorded in MLP

(Meridian Lossless Packing; a lossless audio compression system that can completely recreate the PCM signal), the signals are recognized as the linear PCM signals, however, no indicator lights up on the display.

• This System can recognize up to 4 000 tracks in a disc.

Also, the System can recognize up to 150 tracks per group and up to 99 groups in a disc.

– If there are any unplayable files in a folder, those files are also counted in the total file number.

– Playable files which do not belong to any groups are handled as Group 1.

• For DVD-VR playback...

– This System can play only a disc of UDF-Bridge format.

– For details about DVD-VR format and playlist, refer to the manual of the recording equipment.

– You cannot use reverse slow motion, Program Play, or

Random Play.

• For MP3/WMA playback...

– MP3/WMA discs require a longer readout time than regular CDs. (It depends on the complexity of the group/ file configuration.)

– Some MP3/WMA files cannot be played back and will be skipped. This results from their recording processes and conditions.

– This System can play only a disc of ISO 9660 Level 1 or

Level 2.

– This System can playback MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower).

– It is recommended that you make each MP3/WMA file at a sampling rate of 44.1 kHz and at a bit rate of 128 kbps.

This System cannot playback files made at a bit rate of less than 64 kbps.

• For JPEG files playback...

– It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.)

– This System can play only baseline JPEG files*.

Progressive JPEG files* or lossless JPEG files* cannot be played.

* Baseline JPEG format: Used for digital cameras, web, etc.

Progressive JPEG format: Used for web.

Lossless JPEG format: An old type and rarely used now.

35


– This System can playback JPEG files with the extension code <.jpg> or <.jpeg> (regardless of the letter case— upper/lower).

– This System may not playback JPEG files properly if they are recorded on a device other than a digital still camera.

– During slide-show playback, zoom cannot be operated.

• For MPEG-1/MPEG-2 playback...

– The stream format should conform to MPEG system/ program stream.

– 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is recommended for the highest resolution.

– This System also supports the resolutions of 352 x 576/

480 x 576/ 352 x 288 pixels (25 fps) and 352 x 480/ 480 x 480/ 352 x 240 pixels (30 fps).

– The file format should be MP@ML (Main Profile at

Main Level)/SP@ML (Simple profile at Main Level)/

MP@LL (Main Profile at Low Level).

– Audio streams should conform to MPEG1 Audio layer-2 or MPEG2 Audio Layer-2.

• For ASF playback...

– This System can play back ASF files with the extension code <.asf> (regardless of the letter case—upper/lower).

– This System supports ASF files whose resolution is

352 x 288 pixels or less.

– Some recorded files may not be able to playback depending on file characteristics, kind of digital camera/ video camera, or recording conditions.

– You cannot use the following functions—One Touch

Replay, Slow motion, A-B Repeat, Program Play and

Random Play.

• For DivX playback...


“Multi-border” is not supported.

– The System supports DivX files whose resolution is 720 x 480 pixels or less (30 fps), and 720 x 576 pixels or less

(25 fps).

– Audio stream should conform to MPEG1 Audio Layer-2 or MPEG Audio Layer-3 (MP3).

– This System can play back DivX files with the extension code <.divx> <.div> <.avi> (regardless of the letter case—upper/lower).

– The System does not support GMC (Global Motion

Compression).

– The file encoded in the interlaced scanning mode may not be played back correctly.


Replay, Slow motion, A-B Repeat, Program Play,

Random Play and on-screen operations.

Playing Back a Portable Audio Device:

• When QP Link fails due to a weak sound signal from the

LINE IN jack, Auto Standby may turn the System off even if you can hear the sound from the speakers.

In such cases, adjust the volume level of the component louder so that the System can detect the sound signal properly.

• Changing from LINE to another source while QP Link works will deactivate QP Link temporarily.

In this case, the following reactivates QP Link:

– Pressing QP LINK on the remote control.

– Unplugging the component from the LINE IN jack, then plugging it again.

• If you press STANDBY to turn the System off or if preset Timer turns the System off while QP Link works, the

System will deactivate QP Link temporarily.

In such cases, the following reactivates QP Link:

– When no sound signal comes from the LINE IN jack for about 30 seconds after the System is turned off.

– When you turn on the power again.

• QP Link may start working when you just plug in the component to the LINE IN jack or unplug it. This is not a malfunction.

Playing Back from the PC:

• Check if your PC equipped with the CD-ROM drive is running on Windows R 98*, Windows R 98SE*, Windows R

Me*, Windows R 2000*, or Windows R XP* and prepare its

CD-ROM.

*Microsoft R , Windows R 98, Windows R 98SE, Windows R

Me, Windows R 2000 and Windows R XP are registered trademarks of Microsoft corporation.

• DO NOT turn off the System or disconnect the USB cable while installing the drivers or until your PC has recognized the System.

• Use a full speed USB cable (version 1.1).

• If your PC does not recognize the System, disconnect the

USB cable and connect it again. If this does not work, restart Windows.

• The drivers installed can be recognized only when the USB cable is connected between the System and your PC.

• The sound may not be played back correctly—interrupted or degraded—due to your PC settings or PC specifications.

Daily Operations—Sound & Other Adjustments


Adjusting the Sound:

• This function also affects the sound through the headphones.

Changing the Scanning Mode:

• You cannot change the scanning mode to progressive in the following cases:

– When your TV does not support the progressive video input.

– When you have not connected your TV to the system using a component video cord.

Setting the Clock:

• “0:00” will flash on the display until you set the clock.

• The clock may gain or lose 1 to 2 minutes per month. If this happens, reset the clock.

36




Selecting the Audio Track:

• On some DVD Video discs, you cannot change audio languages while playing back.

Special Effect Playback:

• During slow-motion playback, no sound will be reproduced.

• While zoomed in, the picture may look coarse.



Programming the Playing Order—Program Play:

• While programming steps...

– You cannot eject any discs from the disc trays.

– Your entry will be ignored if you have tried to program an item number that does not exist (for example, selecting track 14 on a disc that only has 12 tracks).

Playing Repeatedly:

• When DVD Video or DVD Audio is loaded in this System, playback of the disc next to the DVD Video or DVD Audio will not start, although ALL /REPEAT ALL on the TV screen or ALL in the display window is shown.

• A-B Repeat can be used within the same title while playing a DVD Video, and within the same track for the other discs.

On-screen Disc Operations:

• For DVD-R/-RW in the VR format, “PG” or “PL” appears instead of “TITLE” on the on-screen bar.

Operations on the Control Screen:

• If you press ON SCREEN on the remote control during playback, playback information appears on the TV screen.


(see pages 29 and 30)

Recording on a Tape:

• The recording level is automatically set correctly. Thus, you can adjust the sound you are actually listening to without affecting the recording level.

• There is leader tape which cannot be recorded onto at the start and end of cassette tapes. Thus, when recording CDs or radio broadcasts, wind the leader tape first to ensure that the recording will be made without any music part lost.

• If you start recording with no cassette inserted, “NO REC” appears on the display. If a protected tape has been inserted, “NO REC” appears.

• You cannot open or close the disc tray while recording a disc.

• Synchronized recording does not function on the file format of MPEG-1, MPEG-2, ASF, and DivX.



Setting the Timer:

• If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when the timer is activated.

• When you unplug the AC power cord or if a power failure occurs, the timer will be canceled. You need to set the clock first, then the timer again.

• If you set DVD Video as the source, Daily Timer will not work correctly.

Timer Priority:

• If you set the Sleep Timer after Daily Timer starts playing the selected source, Daily Timer is canceled.



General:

• If the upper and lower parts of the menu are cut off, adjust the picture size control of the TV.

LANGUAGE menu:

• When the language you have selected for MENU

LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is not recorded on a disc, the original language is used as the initial language.

PICTURE menu—MONITOR TYPE:

• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size may become 4:3 letter box while playing a disc. This depends on how the discs are recorded.

• When you select “16:9/16:9 MULTI” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.

OTHERS menu—ON SCREEN GUIDE:

• The setup menu and on-screen bar will be displayed (and recorded) even though this function is set to “OFF.”

Subtitles and the information for zoom-in always appear on the display regardless of this setting.

37


Troubleshooting

General:

Adjustments or settings are suddenly canceled before you finish.

]

There is a time limit. Repeat procedure again.

Operations are disabled.

]

The built-in microprocessor may malfunction due to external electrical interference.

Unplug the AC power cord and then plug it back in.

Unable to operate the System from the remote control.

] The path between the remote control and the remote sensor on the System is blocked.

] The batteries are exhausted.

No sound is heard.

]

]

Speaker connections are incorrect or loose.

Headphones are connected.

No picture appears on the screen.

] The video cord connections are incorrect or loose.

No picture is displayed on the TV screen, the picture is blurred, or the picture is divided into two parts.

]

The System is connected to a TV which does not support progressive video input.

The left and right edges of the picture are missing on the screen.

]

Select “4:3 LB/4:3 MULTI LB” for “MONITOR TYPE”

(see page 33).

Radio Operations:

Hard to hear broadcasts because of noise.

]

]

]

Antennas connections are incorrect or loose.

The AM loop antenna is too close to the System.

The FM antenna is not properly extended and positioned.

Disc Playback Operations:

The disc does not play.

]

You have inserted a disc whose Region Code is not correct. (“REGION ERR” appears on the display.)

] The disc is placed upside down. Place the disc with the label side up.

ID3 Tag on an MP3/WMA disc cannot be shown.

]

There are two types of ID3 Tag—Version 1 and Version 2.

This System can only show ID3 Tag Version 1.

Groups and tracks are not played back as you expect.

]

The playing order is determined when the groups and tracks were recorded. It depends on the writing application.

MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF or DivX files are not played back.

] The disc may include different types of tracks (MP3/

WMA files, JPEG files and MPEG-1/MPEG-2/ASF/

DivX files). In this case, you can only playback the files selected by the “FILE TYPE” setting (see page 33).

]

You have changed the “FILE TYPE” setting after the

System read the disc. In this case, reload the disc.

38

“NO AUDIO” appears.

]

This System cannot playback illegally produced DVD

Audio discs.

“LR ONLY” appears.

] Some DVD Audio discs prohibit downmixed output.

When you playback such a disc, this System plays back the left front and right front signals only.

The disc sound is discontinuous.

]

The disc is scratched or dirty.

No subtitle appears on the display though you have selected the initial subtitle language.

]

Some DVDs are programmed to always display no subtitle initially. If this happens, press SUBTITLE after starting playback (see page 18).

Audio language is different from the one you have selected as the initial audio language.

] Some DVDs are programmed to always use the original language initially. If this happens, press AUDIO/MPX after starting playback (see page 17).

The disc tray does not open or close.

]

]

The AC power cord is not plugged in.

Child Lock is in use. “LOCKED” appears in the display window (see page 22).

Tape Operations:

The cassette holder cannot be opened.

]

Power supply from the AC power cord has been cut off while the tape was running. Turn on the System.

USB Operations:

Unable to playback through the USB connection.

]

USB connection and setting is incorrect.

Playback stops.

]

]

]

Disconnect and connect the USB cable again.

Restart the music software on your PC.

Turn off and on the System.

Timer Operations:

Daily Timer does not work.

]

The System has been turned on when the on-time comes.

Timer starts working only when the System is turned off.

Daily Timer does not start playback.

]

]

The disc loaded is a DVD Video. Change the disc.

Title/group number and chapter/track number are not entered while setting the Daily Timer. Do not skip these steps when you want to play a disc using Daily Timer.


Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish

Bhutani

Greek

Esperanto

Estonian

Basque

Afar

Abkhazian

Afrikaans

Ameharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali, Bangla

DA

DZ

EL

EO

ET

EU

BO

BR

CA

CO

CS

CY

AY

AZ

BA

BE

BG

BH

BI

BN

AA

AB

AF

AM

AR

AS

Language Code List

Persian

Finnish

Fiji

Faroese

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Hebrew

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

IN

IS

IW

JI

JW

KA

KK

KL

HR

HU

HY

IA

IE

IK

FA

FI

FJ

FO

FY

GA

GD

GL

GN

GU

HA

HI

KM

KN

KO

KS

KU

KY

LA

LN

LO

LT

LV

MG

Cambodian

Kannada

Korean (KOR)

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laothian

Lithuanian

Latvian, Lettish

Malagasy

MI

MK

ML

MN

MO

MR

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

MS

MT

MY

Malay (MAY)

Maltese

Burmese

NA Nauru

NE Nepali

NL Dutch

NO Norwegian

OC Occitan

OM (Afan) Oromo

OR Oriya

PA Panjabi

PL Polish

PS Pashto, Pushto

PT Portuguese

QU Quechua

RM Rhaeto-Romance

RN Kirundi

RO Rumanian

RW Kinyarwanda

SA Sanskrit

SD Sindhi

SG Sangho

SH Serbo-Croatian

SI Singhalese

SK Slovak

SL Slovenian

SM Samoan

SN Shona

SO Somali

SQ Albanian

SR Serbian

SS Siswati

ST Sesotho

SU Sundanese

SV Swedish

SW Swahili

TA Tamil

TE Telugu

TG Tajik

TH Thai

TI Tigrinya

TK Turkmen

TL Tagalog

TN Setswana

TO Tonga

TR Turkish

TS Tsonga

TT Tatar

TW Twi

UK Ukrainian

UR Urdu

UZ Uzbek

VI Vietnamese

VO Volapuk

WO Wolof

XH Xhosa

YO Yoruba

ZU Zulu

Maintenance

To get the best performance of the System, keep your discs, tapes and mechanism clean.

Handling discs

• Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, extreme temperature, and moisture.

To clean the disc:

Wipe the disc with a soft cloth in a straight line from center to edge.

Cleaning the System

• Stains should be wiped off with a soft cloth. If the System is heavily stained, wipe it with a cloth soaked in waterdiluted neutral detergent and wrung well, then wipe clean with a dry cloth.

• Since the System may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following:

– DO NOT wipe it with a hard cloth.

– DO NOT wipe it forcefully.

– DO NOT wipe it with thinner or benzine.

– DO NOT apply any volatile substance such as insecticides to it.

– DO NOT allow any rubber or plastic to remain in contact for a long time.

To remove the speaker grilles:

Holes

Speaker grille

Projection

39


OPTICAL DIGITAL OUT Signals

DIGITAL AUDIO

OUTPUT

Playback disc

DVD Video with 48 kHz, 16/20/24 bit Linear PCM with 96 kHz, Linear PCM with Dolby Digital with DTS

DVD Audio with 48/96/192 kHz, 16/20/24 bit

Linear PCM with 44.1/88.2/176.4 kHz,

16/20/24 bit Linear PCM with Dolby Digital with DTS

DVD-R/-RW in DVD-VR format with 48 kHz, 16/20/24 bit Linear PCM with Dolby Digital

SVCD, VCD, CD

CD with DTS

MP3/WMA/MPEG-1/MPEG-2/DivX

ASF

STREAM/PCM

DTS bitstream

Output Signals

DOLBY DIGITAL/PCM

48 kHz, 16 bit Linear PCM*

48 kHz, 16 bit Linear PCM

Dolby Digital bitstream 48 kHz, 16 bit Linear PCM



44.1 kHz, 16 bit Linear PCM*

Dolby Digital bitstream

DTS bitstream

PCM ONLY





44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM

DTS bitstream 44.1 kHz, 16 bit Linear PCM

32/44.1/48 kHz, 16 bit Linear PCM


* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DVD OPTICAL

DIGITAL OUT terminal.

Operating JVC’s TVs Using the Remote Control

You can use the remote control to operate JVC’s TVs.

Remote control

TV Turn on/off TV.

While holding SHIFT, press...

TV CH ,

TV VOLUME + ,–

TV/VIDEO

Change the channels.

Adjust the volume.

Change the input mode.

TV CH ,

TV

TV/VIDEO

SHIFT

TV VOLUME

+,–

40


Specifications

Amplifier section—CA-UXG70

Output Power: 160 W (80 W+80 W) at 6

Ω

(10% THD)

Audio Input LINE IN:

500 mV/49 k Ω

250 mV/49 k

Ω

(at “L.IN LVL1”)

125 mV/49 k

Ω



Audio OutputLINE OUT:

1.0 Vrms (3 k

Ω)

500 mVrms (1.5 k

(at “L.OUT LVL1”)

Ω)

SUBWOOFER OUT: 260 mVrms/3.9 k

HEADPHONES OUT:


Ω

17 mW/32

Ω

Digital output: DVD OPTICAL DIGITAL OUT:

–21 dBm to –15 dBm (660 nm ±30 nm)

USB input:

Video output:

USB AUDIO

Color system: NTSC or PAL(interlaced/progressive)

VIDEO (composite): 1 V(p-p)/75

Ω

S-VIDEO:Y (luminance) 1 V(p-p)/75

Ω

C (chrominance, burst)

NTSC

PAL

COMPONENT: (Y)

Speaker impedance:

(P

B

Headphone impedance:

/P

R

)

0.286 V(p-p)/75

Ω

0.3 V(p-p)/75 Ω

1 V(p-p)/75

Ω

0.7 V(p-p)/75

Ω

6 Ω – 16 Ω

16

Ω

– 1 k

Ω

Tuner section

FM tuning range:

AM (MW) tuning range:

87.5 MHz – 108.0 MHz

531 kHz – 1 710 kHz (at 9 kHz intervals)


Tape section

Frequency response:

Wow and flutter:

60 Hz – 14 000 Hz

0.15 % (WRMS)

Disc player section

Playable disc: DVD Video/DVD Audio/CD/VCD/SVCD

CD-R/CD-RW (CD/SVCD/VCD/MP3/

WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX format)

DVD-R/-RW (DVD-VR/DVD Video/MP3/


+R/+RW(DVD Video format)

DVD-ROM (DVD Video format)

Dynamic range:

Horizontal resolution:

Wow and flutter:

80 dB

500 lines

Immeasurable

General

Power requirement:

Power consumption:

AC 240 V , 50 Hz

95 W (at operation)

18 W (at standby)

Dimensions (approx.):

3.9 W (at standby display OFF mode)

175 mm x 250 mm x 411 mm

(W/H/D)

Mass (approx.): 7.9 kg

Speakers—SP-UXG70

Speaker units: Tweeter:

Squawker:

1.5 cm dome x 1

4 cm cone x 1

Impedance:

Woofer:


13.5

cm cone x 1

6

Ω

166 mm x 250 mm x 232 mm

Mass (approx.):

(W/H/D)

2.8 kg each

Supplied Accessories

See page 3.

Design and specifications are subject to change without notice.

• Manufactured under license from Dolby Laboratories. “Dolby”,

“Pro Logic”, “MLP lossless”, and the double-D symbol are trademarks of Dolby Laboratories.

• “DTS” and “DTS 2.0+ Digital Out” are registered trademarks of

Digital Theater Systems, Inc.

• “Official DivX

®

Certified product” “Plays all versions of DivX video (including DivX

®

6) with standard playback of DivX

®

® media files” “DivX, DivX certified, and associated logos are trademarks of DivX, Inc. and are used under licence.”

• USE OF THIS PRODUCT IN ANY MANNER THAT

COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS

PROHIBITED, EXCEPT FOR USE BY A CONSUMER

ENGAGING IN PERSONAL AND NON-COMMERCIAL

ACTIVITIES.

• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE

WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE

DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625

PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS

RECOMMENDED THAT THE USER SWITCH THE

CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.

IF THERE ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD

PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE

CENTER.”

41


Parts Index

Remote control

Button

7777

¡

8888

,

AUDIO

TV

,

,

1

4

,

C.VOICE

,

(One-Touch Replay) a s w r v e

, ENTER/SET 8 t x

Number buttons

3D PHONIC

AHB PRO

ANGLE

AUDIO/MPX

A.STANDBY

BASS/TREBLE

1 y u

6 y d

.

CANCEL

CLOCK/TIMER

DIMMER

Disc tray selecting buttons

DISPLAY

DVD LEVEL

DVD/CD

FADE MUTING

FM/PLAY MODE

FM/AM

GROUP/TITLE

GROUP/TITLE SKIP

LINE

LINE OUT LEVEL

MENU/PL

ON SCREEN

PAGE

QP LINK

REPEAT

REPEAT A-B

RETURN

SCAN MODE

SET UP

SHIFT

SLEEP

SLOW

SOUND TURBO II

SUBTITLE

TAPE

TOP MENU/PG

TV CH

TV VOLUME + , –

TV/VIDEO

USB

VFP

VOLUME + , –

ZOOM

9

9

3

,

,

(

(

Page

7, 32

40

10, 11, 19, 21, 28, 29, 30

9, 11

9, 11, 21, 28

10, 19, 21, 27

9, 11, 14, 15, 16, 18, 19, 21, 24 – 28

19

19

9, 11, 19, 20, 25, 26

14

13

18

17

16

13 h i f

2 h u q

, n p

21, 31, 32

16, 31, 32

15

10

16

14

7, 10, 11, 21, 27, 30

13

8, 20, 21 x v z

5

7, 8, 9

10, 28

10, 28

7

14 k l n i b b

7

11, 26

24

18

12

22, 28

22

11

3

9 o

15

33

10, 11, 12, 14, 15, 16, 18, 19, 22, 28, 40 g 16 r 19

; 13 t 18 c 7, 9

7 11, 26

8 40 m 40 f 40

/ 7, 12

4 15 m 7, 13 j 19, 28

Main unit

Button

7777

& STANDBY lamp

Cassette holder

3

!

-

DISC 1 - 5 , PLAY , EJECT 9

Display

DVD/CD

FM/AM

#

DVD/CD

8888

2

6

5

LINE

LINE IN/OUT jacks

PHONES

7

$

&

0

REC

Remote sensor

SOUND TURBO II

TAPE

UP

¢

USB

¢

, DOWN

USB AUDIO jack

VOLUME + , –

4

Page

7, 8

8, 10, 22

9, 29

10, 22

6

7, 8, 10, 27, 30

10, 27

8

7

5

%

7

8

1

4

29, 30

5

13

= 7, 9

@~ 8, 9, 11, 21

#

^

12

12

13

Remote control

1

1

5

6

7

8

2

3

4

9

2

3 r t y u

4

5

6

7

8

9 p q w e i o

;

7

10

1

4

8

0

2

5

9

10

3

6

=

~

!

@

#

$

%

^

& l

/ z x c v b n m

,

.

f g h j k a s d

This remote control can also operate JVC’s TVs

(see page 40).

Main unit

0

-

42

Cover[A].fm Page 2 Wednesday, May 10, 2006 11:03 AM

EN

© 2006 Victor Company of Japan, Limited 0506WMKMDCJEM

Cover[UJ].fm Page 1 Monday, April 24, 2006 10:18 AM


UX-G70


SUPER VIDEO

INSTRUCTIONS

GVT0181-015A

[UJ]

Safty[U].fm Page 1 Friday, April 21, 2006 2:50 PM








CAUTION






2.


3.


CAUTION











Front view

15 cm

Side view

15 cm

15 cm 1 cm 1 cm 15 cm

15 cm


10 cm

CA-UXG70


G-1

UX-G70[UJ].book Page 1 Monday, May 8, 2006 1:35 PM

Introduction

Precautions

Installation






Power sources






• In a damp room



Internal heat



Others



Contents

Connections ..............................................................3




































Specifications .................................................................... 39

Parts Index ............................................................40



1




COMPACT

DIGITAL AUDIO






SVCD formats. MP3, WMA and JPEG files written in accordance with the “ISO 9660” format can also be played.

• DVD-R/-RW, +R/+RW: Recorded in the DVD Video format. MP3, WMA and JPEG files written in the UDF bridge format can also be played.

• DVD-RW/-ROM: Recorded in the DVD Video





CD-G (CD-Graphics), and DVD/CD Text.


• In this manual, “file” and “track” are interchangeably used for MP3/WMA/JPEG operations.



DVD players and DVDs have their own Region Code numbers. This System can playback only DVDs with Region

Code numbers including “1.”

EX.:


• Button and control operations are explained in the table below.

• Some related tips and notes are explained later in the sections “Learning More about This System” and

“Troubleshooting,” but not in the same section explaining the operations ( INFO indicates that the content has some information).


2

sec.

Indicates that you press the button briefly and repeatedly until an option you want is selected.


Indicates that you press and hold the button for a specified period.

Remote

ONLY

Main Unit

ONLY




Audio formats




Packing)








2


Connections





Rear panel



• FM antenna (x1)



• Core filters* (x2)


• Batteries (x2)

• AC plug adapter (x1)


~


See page 4.

Ÿ


See page 4.

!


See page 4.

⁄


See page 4.

Voltage selector: See page 5.

@


See page 5.

¤



• If the wall outlet does not match the AC plug, use the supplied AC plug adapter.

Front panel




From the video game: See page 12.


*

Attaching the core filter to the USB cable, LINE IN and LINE OUT cable to reduce interference

At the front panel

Stopper


Wind firmly the LINE IN and LINE OUT cable once.

• Keep close between the plug and the core filter.

• Do not damage the cable by applying excessive force when winding.


3


~



(not supplied)

SUB -

WOOFER

OUT



Ÿ

AM/FM antenna



Ω


!

TV/monitor


Red

Blue


AM loop antenna

(supplied)


(not supplied)


COMPONENT jacks.





⁄






Keep it connected.


(not supplied)


Protective cap


(not supplied)




4


@

Speakers


Insert

Press and hold

Red

Release




Before plugging in the System

Set the correct voltage for your area with the voltage selector on the rear.

220V

110V

VOLTAGE

SELECTOR

127V

230V-240V

Use a screwdriver to set the voltage selector to the same voltage as where you are plugging in the unit. (See also the back cover page.)

From right speaker

CAUTION:

Black

From left speaker







To the audio output

At the front panel


(not supplied)

R6(SUM-3)/AA(15F)







To the audio input

5





1 2 3 4 5 6 7 8 9 p


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO

SLEEP

B.S.P. BONUS REC 1 2 3 q w e r t y u i














4 PG/PL indicators






6 USB indicator


7 AHB PRO indicator







p SLEEP indicator


q Playback mode indicators




–

1


–

–

GROUP

1 DISC





w Main display




• While selecting “GAME”: “G1 SPORT,” “G2 RPG,”

“G3 ACT,” “G4 NIGHT” or “G5 MANUAL” appears

(depending on the setting).


e 3D PHONIC indicator r




t PRGR. (Progressive) indicator


y B.S.P. (Browsable Still Picture) indicator


u BONUS indicator


i Daily Timer indicators



6



—Playback

Remote control


ENTER/SET

TOP MENU/PG

RETURN

2

1 , ¡

QP LINK

SHIFT

1

2

3

TV VOLUME

VOLUME

1

Number buttons

MENU/PL

, , ,

GROUP/TITLE SKIP

4

,

¢

FM/PLAY MODE

3


GAME


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP



1






2




• If you press GAME, turn on the video game connected to the System.

3

4











4


7



INFO

Main Unit

ONLY





TUNER FM

TUNER AM

2







2 sec.

GROUP/TITLE SKIP

DOWN

2 sec.

UP


DOWN

AM 9KHZ

(9 kHz interval)





Remote

ONLY


PAGE

FM/PLAY MODE

(while holding...)

UP




AM 10KHZ

(10 kHz interval)

(while holding...)

8


Remote

ONLY



1

2





1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO SLEEP


3


Select a preset number for the station you store.

DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 3

3

DISC 5 A.STANDBY

5

VFP

8

6

SLEEP

9


10 0

ZOOM

10

Examples:


5.


10.


10, 1, then 5.


10, 3, then 0.


4

Store the station.

ENTER/SET


REC

1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

S.TURBO SLEEP



1

Select the band (FM or AM).

TUNER FM

Remote

ONLY

TUNER AM

2

Select the preset number for the station you stored.

DISC 1

1

DISC 4

4

SCAN MODE

DISC 2

2

DISC 3

3

DISC 5 A.STANDBY

5

VFP

6

SLEEP

9 7 8


10 0

ZOOM

10

Examples:


5.


10.


10, 1, then 5.


10, 3, then 0.


¡

or

1

button.

9



INFO


• DVD Video/DVD-VR comprises of “ Titles ” which includes “ Chapters ,” DVD Audio/MP3/WMA/JPEG comprises of “ Groups ” which includes “ Tracks ,” JPEG comprises of “ Groups ” which includes “ Files ,” and CD/

SVCD/VCD comprises of only “ Tracks .”

• For playback of MP3/WMA/JPEG, see also page 27.









, , , , ,


SCREEN GUIDE” on page 32.


Remote Control:

DISC 1

1

DISC 4

4

DISC 2

2

DISC 5

5

DISC 3

3

Playback starts.




DVD/CD

3





DVD/CD

(while holding...)

Main Unit:



Remote

ONLY

Playback starts.

GROUP/TITLE SKIP

To release, press

DVD/CD

3

.

• While playing DVD/SVCD/VCD/MP3/WMA: This

System can store the stop point, and when you start playback again by pressing DVD/CD 3 (even while on standby), it starts from the position where you have stopped—Resume Play. (“RESUME” appears on the display when you stop playback.)

To stop completely while Resume is activated, press 7 twice. (To cancel Resume, see “RESUME” on page 32.)



(while holding...)




• For VCD/SVCD, cancel PBC (see the next page).


GROUP/TITLE SKIP


10




– SLOW

+ x2 x5 x2 x5

Remote

ONLY x10 x10 x20 x20 x60 x60


WMA discs. For MP3/WMA discs, search speed and the indications on the TV are different.



3

.

Remote

ONLY




DISC 1

1

DISC 4

4

SCAN MODE

7


10

DISC 2

2

DISC 5

5

VFP

8

0

DISC 3

3

A.STANDBY

6

SLEEP

9

ZOOM

10

Examples:




1, then 5.


3, then 0.

7





Examples:




4 5 6


SCAN MODE VFP SLEEP

7 8


9

ZOOM

1, then 5.


10 0 10

3, then 0.


GROUP/TITLE SKIP




TOP MENU/PG

RETURN


7



TOP MENU/PG MENU/PL

RETURN

2 Select an item on the disc menu.

TV CH

TV CH

Remote

ONLY

ENTER/SET


(while holding...)


7



7



3

.


INFO




Remote

ONLY


QP LINK

CLOCK/TIMER

QPLINK ON

QPLINK OFF

(while holding...)


11



Changes the source to LINE automatically. (If you change from LINE to another source, QP link will be canceled.)




1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO

SLEEP





1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO

SLEEP



Enjoying a video game

INFO

By connecting a video game to this System instead of a TV, you can enjoy the image of the game with your TV and the dynamic sound with this System.

• Refer also to the manual of your video game and TV.

To connect the video game

Yellow

Video game

White


INFO




IMPORTANT






2



USB

Red

At the front panel

To enjoy powerful game sound

You can enjoy the sound effect for the genre or scene of the game by selecting one of the settings below.



At the front panel

PC

USB cable

GAME

G1 SPORT

(initial setting)

G2 RPG G3 ACT

G1 SPORT

G2 RPG

G3 ACT

G4 NIGHT

G5 MANUAL G4 NIGHT

For sport game (initial setting).

For RPG.

For action game.

For enjoying powerful game sound with low sound level.

G5 MANUAL You can adjust the bass and treble level manually with this setting. See “To adjust the tone” on page 13 for how to adjust it.

4


3 m .











12




Remote control

VFP

SCAN MODE

LINE OUT LEVEL

A.STANDBY

SLEEP

DIMMER

DISPLAY

, , ,

FADE

MUTING

Remote

ONLY



ENTER/SET

DVD LEVEL

AHB PRO

3D PHONIC

CLOCK/TIMER

SHIFT

SOUND TURBO

Main unit

SOUND

TURBO

DIMMER

BASS/TREBLE

VOLUME

+,–

FADE

MUTING

VOLUME +,–


INFO



Turbo II.

SOUND

TURBO

TURBO ON

TURBO OFF




Remote

ONLY


DVD LEVEL

AHB PRO

AHB ON

AHB OFF



Remote

ONLY





(VOL MAX).


BASS/

TREBLE

BASS TREBLE

Canceled


BASS/

TREBLE

VOLUME

BASS TREBLE

Canceled

TV VOLUME

VOLUME

TV VOLUME

VOLUME

TV VOLUME

VOLUME

13



—3D Phonic

Remote

ONLY


3D PHONIC

AUDIO/MPX

(while holding...)








Increase Level

Remote

ONLY


• This only functions for DVD Video.

DVD LEVEL

AHB PRO

NORMAL MEDIUM

HIGH

(initial setting)

(while holding...)

NORMAL

MEDIUM

HIGH






Remote

ONLY

If the sound from the component connected to the

LINE IN jack is too loud or is too quiet when changing from another source to LINE, you can change the audio input level through the LINE IN jack (without changing the volume level).

2 sec.

ENTER/SET

L.IN LVL1 L.IN LVL2

L.IN LVL3

(initial setting)

L.IN LVL1

L.IN LVL2

L.IN LVL3



Select this when listening to a portable audio device (initial setting).


Remote

ONLY



LINE OUT LEVEL

10

L.OUT LVL1

(initial setting)

L.OUT LVL2

(while holding...)

L.OUT LVL1

L.OUT LVL2



14




TV/VIDEO

DIMMER

DIMMER OFF

(Canceled)

DIMMER ON

AUTO DIM






Remote

ONLY

INFO





“PAL PROG.”

(while holding...)

NTSC

NTSC PROG

PAL

PAL PROG

SCAN MODE

7

PAL PAL PROG

NTSC PROG NTSC

ENTER/SET








TV CH

Remote

ONLY




VFP

8

NORMAL

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

0

0

0

0

0

0



NORMAL CINEMA

USER2 USER1

NORMAL

CINEMA

USER1/USER2







1

2




TV CH

ENTER/SET

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS







(–8 to +8).


15



TV CH

ENTER/SET


Remote

ONLY

Auto Standby

TV CH




A.STANDBY

6

On

Canceled


Remote

ONLY

INFO




1


QP LINK

CLOCK/TIMER


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO SLEEP


(while holding...)




Sleep Timer



2


Set the time.


ENTER/SET


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.


SLEEP

9

(while holding...)

10 20 30 60 90 120 150

Canceled







DISPLAY

CANCEL

(while holding...)

Disc type Clock

Source information

16


Remote control

Number buttons

ANGLE

, , ,

DVD/CD 3

8

SLOW ,

AUDIO/MPX

SHIFT



Remote

ONLY

INFO

For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to.


For DVD-VR and SVCD/VCD: When playing back a track, you can select the audio channel to play.


(see page 23).

3D PHONIC

AUDIO/MPX

ZOOM

ENTER

/SET

7

PAGE

C.VOICE

SUBTITLE


Ex.:

1/3

ENGLISH

2/3

FRENCH

1/3

ENGLISH

2/3

FRENCH

3/3

JAPANESE

3/3

JAPANESE

While playing a DVD Audio...

Ex.:

1/3 2/3

1 2

3/3

3

While playing a DVD-VR, or SVCD/VCD...

3D PHONIC

AUDIO/MPX

SVCD

ST1

R2

DVD-VR/VCD

ST

ST2

L2

L R

L1

R1

ST1/ST2/

ST

L1/L2/L

R1/R2/R





(ST1/ST2).

17



Remote

ONLY

For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV.





1

C. VOICE

SUBTITLE

1/3

ENGLISH

1/3

ENGLISH


Remote

ONLY




Ex.:

1/3

1

(while holding...)

2/3

2

ANGLE

0

3/3

3

1/3

1

2/3

2

3/3

3

2

TV CH

Ex.:

1/3

ENGLISH

1/3

ENGLISH

TV CH

2/3

FRENCH

2/3

FRENCH


C. VOICE

SUBTITLE

ON

ON


C. VOICE

SUBTITLE

3/3

3/3

JAPANESE

OFF

OFF


Remote

ONLY




(see page 23).

(while holding...)

PAGE

FM/PLAY MODE


(if available).


Remote

ONLY





1





18



DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 3

3

DISC 5 A.STANDBY

5

VFP

6

SLEEP

9 8

ANGLE

0

ENTER/SET



7

.


Remote

ONLY




C. VOICE

SUBTITLE

3D PHONIC

(On)

Off





– SLOW

+


1/32 1/16 1/8 1/4 1/2

Reverse slow motion

* starts.

1/32 1/16 1/8 1/4



1/2




DVD-VR.

While playing back..

GROUP/TITLE


(while holding...)


Pause playback

To pause:

Remote

ONLY

INFO


While playing...

DVD/CD

Zoom



ZOOM

10






(while holding...)


2


TV CH


TV CH



19


Remote control

Number buttons

ZOOM

TOP MENU/PG

, , ,

DVD/CD

3

8

¡

REPEAT A-B

REPEAT

SHIFT

Main unit

DVD/CD 8

DVD/CD #

EJECT


CANCEL

MENU/PL

ENTER/SET

ON SCREEN

7

4 , ¢

FM/PLAY

MODE


Program Play

Remote

ONLY

INFO



• Program play cannot be used for DVD-VR/JPEG.


1


PAGE

FM/PLAY MODE

PROGRAM

Canceled

RANDOM


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP


On the display

4 , 7 , ¢

PROGRAM

No

1

2

9

10

6

7

8

3

4

5




On the TV

2





3

4





2

3

Select tracks.



DISC 1

1

7

DISC 2

2

DISC 3

3

DISC 4

4

SCAN MODE

DISC 5 A.STANDBY

5

VFP

6

SLEEP

8 9


10 0

ZOOM

10

Examples:




1, then 5.


3, then 0.

20



DVD/CD


To skip a step:

GROUP/TITLE SKIP



Remote

ONLY


• Random Play cannot be used for DVD-VR/JPEG and some

DVDs.


PAGE

FM/PLAY MODE

PROGRAM RANDOM

Canceled

To release, press

DVD/CD

3

.



TV CH


TV CH



4

or

¢







Repeat step 2 .

DISPLAY

CANCEL



PAGE

FM/PLAY MODE

PROGRAM RANDOM

Canceled


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP



DVD/CD






4

.

To release, press

DVD/CD 3 .



PAGE

FM/PLAY MODE

PROGRAM RANDOM

Canceled

21



Remote

ONLY

INFO



• For MP3/WMA/JPEG, see page 28.

Repeat Play



While playing...

REPEAT A-B

REPEAT

Canceled

1 GROUP

DISC ALL



REPEAT A-B

REPEAT 1 1 DISC

Canceled DISC ALL

• For DVD-VR:


REPEAT A-B

REPEAT

1 GROUP 1 DISC

A-B Repeat


• A-B Repeat cannot be used for MP3/WMA and for some

DVDs.


REPEAT A-B

REPEAT




(while holding...)


(while holding...)

REPEAT A-B

REPEAT


•

TV.

A-B appears on the


¡ button.



Canceled DISC ALL


REPEAT A-B

REPEAT 1

Canceled

1

GROUP

1 DISC

DISC ALL

GROUP

DISC ALL



DVD-VR).


Repeats all discs.


Main Unit

ONLY




(while holding...)


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.




22



Remote

ONLY

INFO


On-screen bars

DVD Video

1

DVD-VIDEO

Dolby D

3/2.1ch

2

DISC 1

CHAP.

TITLE 14 CHAP 23

1 / 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

3

4

DVD Audio

1 2

DVD-AUDIO

TIME

LPCM

2/0.0ch

OFF

DISC 1

TRACK


1 / 3 PAGE 1 / 3

3

4

DVD-VR

1 2 3

DVD-VR

TIME

Dolby D

2/0.0ch

OFF


CHAP.

ST ON

4

SVCD

1

SVCD

2

TITLE 14

/ 1/3

CHAP 23

1/3

TOTAL 1:25:58

1/3

3

4

VCD

1

VCD

2

TITLE 14 CHAP 23

1/3

TOTAL 1:25:58

1/3

3

4

CD

1

CD

2

TITLE 14 CHAP

1/3

23

1/3

TOTAL 1:25:58

1/3

3

4

MP3/WMA/JPEG

1

FILE

2

CHAP 23 TOTAL 1:25:58

3


1 Disc type





DISC 1

TITLE 2

CHAP 3

GROUP

PG 2

PL 2

1

TRACK 14

TOTAL 1:25:58

Current disc

Current title

Current chapter

Current group



Current track

Time indications



Playback

/



Pause

Stop


Indication

TIME

OFF

Meanings



CHAP.

TRACK

1/3

1/3

1/3

PAGE 1 / 5






(see also page 18).


(see also page 18).


23






ON SCREEN

DVD-VIDEO

Dolby D

3/2.1ch


DVD-VIDEO

Dolby D

3/2.1ch


CHAP.

1 1/3 1 / 1/3


* This does not appear for MP3/WMA/JPEG discs.

*






DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14

CHAP.

1 /

CHAP

1/3

23

1 / 1/3

TOTAL 1:25:58

1 1/3

2

3



ENTER/SET

TIME 0:00:58

T. REM 0:35:24

REM 0:11:23

TOTAL 1:01:58

DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14

CHAP.

1 /

CHAP

1/3

23

1 / 1/3

TOTAL 1:25:58

1 1/3


ENTER/SET

DISC 1

CHAP.


1 1/3 1 / 1/3 1 1/3

ENGLISH


TV CH

DISC 1 TITLE 14

CHAP.

1

CHAP

1/3

23

2 / 1/3

TOTAL 1:25:58

1 1/3

TV CH

FRENCH


ENTER/SET



ON SCREEN

TIME

REM

TOTAL

T.REM



Elapsed disc time.



ON SCREEN

Repeat Play


2

3




DVD-VIDEO

Dolby D

3/2.1ch


CHAP.

1 / 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

OFF

24





GROUP

DISC





TRACK *

PG

PL

OFF








ENTER/SET

A-B Repeat


1

2

3



DVD-VIDEO

Dolby D

3/2.1ch


CHAP.

1 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

4


TV CH

TV CH

OFF

DVD-VIDEO

Dolby D

3/2.1ch

A–B

DISC 1 TITLE 14 C

CHAP.

1 1/3


Time Search


2

3



Select .


DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14

CHAP.

TIME _ : _ _ : _ _

1 /

CHAP

1/3

23

1 / 1/3

TOTAL 1:25:58

1 1/3



DISC 1

1

DISC 4

7

DISC 2

2

DISC 3

3

4

SCAN MODE

DISC 5 A.STANDBY

5

VFP

8

6

SLEEP

9

ANGLE

0

Examples:








5


ENTER/SET



ENTER/SET

DVD-VIDEO

A-

Dolby D

3/2.1ch

DISC 1 TITLE 14 CH

CHAP.

1 / 1/3

6


ENTER/SET



¡

button.



1

2

3


Select CHAP.

or TRACK


.

DVD-VIDEO

Dolby D

3/2.1ch

OFF


CHAP.

CHAPTER _

1 / 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3


25



DISC 1

1

DISC 4

7

DISC 2

2

DISC 3

3

4

SCAN MODE

DISC 5 A.STANDBY

5

VFP

8

6

SLEEP

9

ANGLE

0

Examples:







ENTER/SET






List:


MENU/PL TOP MENU/PG

RETURN



ORIGINAL PROGRAM

No Date

1 03/12/06

2 09/12/06

3 18/12/06

4 20/12/06

5 25/12/06

6 28/12/06

Ch

L

L

L

L

L

L

Time

12:15

23:05

08:17

07:47

19:38

14:20

Title

La fleur


BOOM!

Mr. Lawrence

Satisfy U





2

3

1 While playing a DVD Audio, display the entire onscreen bar.


DVD-AUDIO

TIME

LPCM

2/0.0ch

OFF

DISC 1

TRACK


1 / 3 PAGE 1 / 5

1


TV CH

TV CH


1 / 3 PAGE 3 / 5

3


ENTER/SET

1 2 3 4


5

PLAY LIST

No Date Chap Length

1 03/12/06 002 0:23:24

2 15/12/06 004 1:04:39

3 24/12/06 013 0:41:26

4 27/12/06 017 0:09:08

Title

Nebula G.

CDJ

Secret Garden

S. Walker

6

1 2 7 8

1

2

3

4

5

6

7

8

Listed number

Recording date

Recording channels

Recording time

Title


Chapters included

Playback time


TV CH

ENTER/SET

6

TV CH

26



Remote

ONLY

INFO

You can search for and play the desired items through the control screen for MP3/WMA/JPEG discs.

Control screen for MP3/WMA/JPEG discs

The control screen automatically appears on the TV screen when you load an MP3, WMA or JPEG disc.


1

6

7

8

9

2

3

4

Group : 2 / 3

Spring

Summer

Fall

Winter

Track Information

Title

Rain

Artist

Album



Cloudy.mp3

Fair.mp3

Fog.mp3

Hail.mp3

Indian summer.mp3

Rain.mp3

Shower.mp3

Snow.mp3

Thunder.mp3

Typhoon.mp3

Wind.mp3

Winter sky.mp3

0

-

5

1

2

3

4

5

6

7

8

9

0

-


Current group

Group list


MP3/WMA)

Current track

Repeat Play setting


(except for JPEG)

Operation mode icon


Highlight bar

Track list

• If files of different types (MP3, WMA and JPEG) are recorded on a disc, select the file type to play (see page 31).



For JPEG:

ENTER/SET




TV CH

TV CH





DVD/CD




ENTER/SET


• Pressing DVD/CD

3 also starts playback.

• Once you start playing back a JPEG track, the control screen disappears.


8

.

27


To select a group (for MP3/WMA/JPEG):

GROUP/TITLE SKIP






8


(while holding...)


GROUP/TITLE SKIP


ZOOM

10

ZOOM 1

ZOOM OFF

ZOOM 2




REPEAT A-B

REPEAT

1 GROUP

Canceled

1 DISC

DISC ALL

2

(while holding...)


TV CH

TV CH




REPEAT A-B

REPEAT GROUP

Canceled

1 DISC

DISC ALL

1

GROUP

1 DISC

DISC ALL




Repeats all discs.

28


Remote control

,

CLOCK

/TIMER


AUDIO

CANCEL

ENTER/SET


Remote

ONLY

INFO

Using Daily Timer, you can wake up with your favorite music.

You can store three Daily Timer settings; however, you can activate only one of the timers at the same time.




Daily Timer initial settings when shipped from the factory








DAILY 1 ON time, DAILY 2 ON time, or DAILY 3

ON time.

QP LINK

CLOCK/TIMER

Daily Timer 1

DAILY 1

ON (Time)

Canceled

Daily Timer 2

DAILY 2

ON (Time)

Daily Timer 3

DAILY 3

Clock setting

(see page 16)

ON (Time)


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.



2

• When the clock has not been set, pressing

CLOCK/TIMER makes the System enter the clock setting mode.



ENTER/SET


29


1

2

3

Set the hour then the minute for on-time.



“TUNER-AM,” “DISC,” or “LINE IN.”


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.





1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3) you want to cancel.

QP LINK

CLOCK/TIMER

3

4

5

For “TUNER-FM” and “TUNER-AM”: Select a preset channel.




(“0” to “40” and “VOL – –”).




Turn off the unit (on standby) if you have set the ontime.

Daily Timer 1

DAILY 1

ON (Time)

Canceled

Daily Timer 2

DAILY 2

ON (Time)

Daily Timer 3

DAILY 3

ON (Time)

Clock setting

(see page 16)


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.


Ex. To cancel Daily

Timer 1

2 Turn off the selected Timer.

DISPLAY

CANCEL











1 Select the Timer (DAILY 1, DAILY 2, or DAILY 3) you want to activate.

QP LINK

CLOCK/TIMER

Daily Timer 1

DAILY 1

ON (Time)

Canceled

Daily Timer 2

DAILY 2

ON (Time)

Daily Timer 3

DAILY 3

ON (Time)

Clock setting

(see page 16)


ENTER/SET


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO SLEEP



3 Wait until the indication disappears.

30


Remote Control

, , ,

SET UP


INFO


Remote

ONLY


1 Press SET UP.

LANGUAGE

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE


ENGLISH

ENGLISH

ENGLISH

ENGLISH

ENTER/SET

2 or ) to select the menu.

3

4

5




ENTER/SET.




Press SET UP.

LANGUAGE menu

Item

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE


PICTURE menu

Item

MONITOR TYPE

16:9 4:3 LB

4:3 PS

Contents




You can select “ENGLISH,” “FRENCH,” or “SPANISH” as the on-screen language.

Contents


16:9 (Wide television screen): For a wide-screen (16:9) TV.

4:3 LB (Letter Box conversion): For a conventional (4:3) TV. Displays a wide-screen picture to fit the width of the TV screen keeping the aspect ratio.

4:3 PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed in to fill the screen vertically and the left and right sides of the picture are cut off.

PICTURE SOURCE

SCREEN SAVER

FILE TYPE










31


AUDIO menu

Item


DOWN MIX


Contents






ONLY.”






OTHERS menu

RESUME

Item

ON SCREEN GUIDE

Contents





32




Connections






















(then stops)














Random Play.





Level 2.











33



















Enjoying a video game:

• When enjoying a game with your video game connected to this System, connect this System and your TV with the composite video cable.

• Connect your video game and this System with the cable compatible with your video game.

• Sound Turbo II, AHB Pro and BASS/TREBLE settings are not available when GAME is selected as the source.

However, you can adjust BASS/TREBLE setting with

“G5 MANUAL” selected.


• Check if your PC equipped with the CD-ROM drive is running on Windows R 98*, Windows R 98SE*,

Windows R Me*, Windows R 2000*, or Windows R XP* and prepare its CD-ROM.

*Microsoft R , Windows R 98, Windows R 98SE, Windows R

Me, Windows R 2000 and Windows R XP are registered trademarks of Microsoft corporation.






































34








Timer Priority:




General:


LANGUAGE menu:




• Even if “4:3 PS” is selected, the screen size may become

4:3 letter box while playing a disc. This depends on how the discs are recorded.

• When you select “16:9” for a picture whose aspect ratio is

4:3, the picture slightly changes due to the process for converting the picture width.




Maintenance

To get the best performance of the System, keep your discs and mechanism clean.

Handling discs

















Holes

Speaker grille

Projection

35


Troubleshooting

General:


]



]







]

]






]



]

Select “4:3 LB” for “MONITOR TYPE” (see page 31).



]

]

]






]

You have inserted a disc whose Region Code is not “1.”

(“REGION ERR” appears on the display.)

]

The disc is placed upside down. Place the disc with the label side up.


]




]


MP3, WMA or JPEG files are not played back.

]

The disc may include both type of tracks (MP3/WMA files and JPEG files). In this case, you can only playback the files selected by the “FILE TYPE” setting (see page 31).

]




]


Audio discs.


]

Some DVD Audio discs prohibit downmixed output.



] The disc is scratched or dirty.


]





]

]



USB Operations:


]


Playback stops.

]

]

]






]




]

]



36



EL

EO

ET

EU

FA

FI

FJ

FO

BO

BR

CA

CO

CS

CY

DA

DZ

AY

AZ

BA

BE

BG

BH

BI

BN

AA

AB

AF

AM

AR

AS

HY

IA

IE

IK

IN

IS

IW

JI

GU

HA

HI

HR

HU

FY

GA

GD

GL

GN

Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish

Bhutani

Greek

Esperanto

Estonian

Basque

Persian

Finnish

Fiji

Faroese

Afar

Abkhazian

Afrikaans

Ameharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali, Bangla

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Hebrew

Yiddish

KU

KY

LA

LN

LO

LT

LV

MG

JW

KA

KK

KL

KM

KN

KO

KS

MI

MK

ML

MN

MO

MR

MS

MT

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay (MAY)

Maltese

MY

NA

NE

NL

NO

Burmese

Nauru

Nepali

Dutch

Norwegian

OC Occitan

OM (Afan) Oromo

OR Oriya

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean (KOR)

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laothian

Lithuanian

Latvian, Lettish

Malagasy

SD

SG

SH

SI

SK

SL

PA

PL

PS

PT

QU

Panjabi

Polish

Pashto, Pushto

Portuguese

Quechua

RM

RN

Rhaeto-Romance

Kirundi

RO Rumanian

RW Kinyarwanda

SA Sanskrit

Sindhi

Sangho

Serbo-Croatian

Singhalese

Slovak

Slovenian

SV

SW

TA

TE

TG

TH

TI

TK

SM

SN

SO

SQ

SR

SS

ST

SU

TL

TN

TO

TR

TS

TT

TW

UK

Tagalog

Setswana

Tonga

Turkish

Tsonga

Tatar

Twi

Ukrainian

UR

UZ

VI

VO

Urdu

Uzbek

Vietnamese

Volapuk

WO Wolof

XH

YO

ZU

Xhosa

Yoruba

Zulu

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

37



DIGITAL AUDIO

OUTPUT

Playback disc






SVCD, VCD, CD

CD with DTS

MP3/WMA

STREAM/PCM

DTS bitstream

Output Signals









DTS bitstream

PCM ONLY












Remote control

TV Turn on/off TV.



TV CH ,


TV/VIDEO

Adjust the volume.


TV CH ,

TV

TV/VIDEO

SHIFT

TV VOLUME

+,–

38


Specifications


Output Power: 120 W per channel, min. RMS, driven into

6

Ω

at 1kHz with no more than 10% total harmonic distortion.


500 mV/49 k Ω (at “L.IN LVL1”)



GAME IN:

500 mV/49 k Ω

Audio Output LINE OUT:

1.0 Vrms (3 k Ω) (at “L.OUT LVL1”)

500 mVrms (1.5 k Ω) (at “L.OUT LVL2”)

SUBWOOFER OUT: 260 mVrms/3.9 k Ω

HEADPHONES OUT: 17 mW/32 Ω


USB input:

Video output:

–21 dBm to –15 dBm (660 nm ±30 nm)

USB AUDIO

Color system: NTSC or PAL (interlaced/progressive)

VIDEO (composite):

S-VIDEO:Y (luminance)

1 V(p-p)/75 Ω

1 V(p-p)/75 Ω


NTSC

PAL

COMPONENT: (Y)

Speaker impedance:

(P

B


/P

R

)

0.286 V(p-p)/75 Ω

0.3 V(p-p)/75 Ω

1 V(p-p)/75

Ω

0.7 V(p-p)/75

Ω

6

Ω

– 16

Ω

16

Ω

– 1 k

Ω

Tuner section

FM tuning range: 87.50 MHz – 108.00 MHz

AM tuning range:






WMA/JPEG format)


WMA/JPEG format)

+R/+RW (DVD Video format)


Dynamic range:


Wow and flutter:

80 dB

500 lines

Immeasurable

General

Power requirement:

AC 110 V/AC 127 V/AC 220 V/ AC 230 V-240 V

(adjustable with the voltage selector), 50 Hz/60 Hz

Power consumption: 90 W (at operation)


14 W (at standby)


175 mm x 250 mm x 411 mm

(W/H/D)

Mass (approx.): 7.6 kg


Speaker units: Tweeter:

Squawker:

1.5 cm dome x 1

4 cm cone x 1

Impedance:

Woofer:


13.5

cm cone x 1

6

Ω

166 mm x 250 mm x 232 mm

Mass (approx.):

(W/H/D)

2.8 kg each


See page 3.



















CENTER.”

39


Parts Index

Remote control

Button

7777

¡

8888

,

AUDIO

TV

,

,

1

4

,

C.VOICE

,


, ENTER/SET 8 t x

Number buttons

3D PHONIC

AHB PRO

ANGLE

AUDIO/MPX

A.STANDBY

BASS/TREBLE

1 y u

6 y d

.

CANCEL

CLOCK/TIMER

DIMMER


DISPLAY

DVD LEVEL

DVD/CD

FADE MUTING

FM/PLAY MODE

FM/AM

GAME

GROUP/TITLE


LINE

LINE OUT LEVEL

MENU/PL

ON SCREEN

PAGE

QP LINK

REPEAT

REPEAT A-B

RETURN

SCAN MODE

SET UP

SHIFT

SLEEP

SLOW

TV CH

(

SOUND TURBO II

TOP MENU/PG


TV/VIDEO

USB

VFP

9

3

,

,

VOLUME + , –

ZOOM

9 (

Page

7, 30

38

10, 11, 19, 21, 28

9, 11

9, 11, 21, 28

10, 19, 21, 27

9, 11, 14, 15, 16, 18, 19, 21, 24 – 31

19

19

9, 11, 19, 20, 25, 26

14

13

18

17

16

13 h i f

2 h u q

, n p

21, 29, 30

16, 29, 30

15

10

16

14

7, 10, 19, 27

13

8, 20, 21 c x v z

7, 8

12

10, 28

10, 28

7

5 k l n i b b

14

11, 26

24

18

11

22, 28

22

7

3

9

11

15

31 o g

10, 11, 14, 15, 16, 18, 19, 22, 28, 29, 38

16 r 19

; 13

7 11, 26

8 38 m 38 f 38

/ 7, 12

4 15 m 7, 13 j 19, 28

Main unit

Button

& STANDBY lamp

7777

DIMMER

3

!

8


Display

DVD/CD

#

DVD/CD

8888

2

6

5

FM/AM 7

GAME

GAME IN jacks

=

0

LINE


$

&

PHONES

Remote sensor

SOUND TURBO II

UP

USB

¢

, DOWN

USB AUDIO jack

VOLUME + , –

4

Page

7

10, 22

15

10, 22

6

7, 10, 27

10, 27

8

7, 12

12

7

5

-

1

#

7

5

4 13

~@ 8, 10, 21

12

^

%

12

13

Remote control

1

1

5

6

7

8

2

3

4

9

0

-

2

3 r t y u

4

5

6

7

8

9 p q w e i o

;

7

10

1

4

8

0

2

5

9

10

3

6

=

~

!

@

#

$

%

^

& l

/ z x c v b n m

,

.

f g h j k a s d


(see page 38).

Main unit

40

Cover[UJ].fm Page 2 Monday, April 24, 2006 10:18 AM

Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada,

Australia, and U.K.)

EN

© 2006 Victor Company of Japan, Limited

220V

110V

VOLTAGE

SELECTOR

127V

230V-240V

CAUTION for mains (AC) line

BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with the position of the voltage selector switch provided on the outside of this equipment and, if different, reset the voltage selector switch, to prevent from a damage or risk of fire/electric shock.

0606WMKMDCJEM

Cover[U].fm Page 1 Tuesday, March 28, 2006 4:08 PM


UX-G70


SUPER VIDEO

INSTRUCTIONS

GVT0181-008A

[US,UN,UG,UX]

Safty[U].fm Page 1 Wednesday, March 22, 2006 11:32 AM








CAUTION






2.


3.


CAUTION











Front view

15 cm

Side view

15 cm

15 cm 1 cm 1 cm 15 cm

15 cm


10 cm

CA-UXG70


G-1

UX-G70[U].book Page 1 Monday, April 17, 2006 5:18 PM

Introduction

Precautions

Installation






Power sources






• In a damp room



Internal heat



Others





Contents

Connections ..............................................................3






























Advanced Tape Operations ..................................29

Recording on a Tape ......................................................... 29

Synchronized Disc Recording........................................... 30

Enjoying Karaoke ..................................................31

Singing Along (Karaoke) .................................................. 31

Microphone Mixing .......................................................... 32

Reserving Karaoke Songs—Karaoke Program Play......... 33







Specifications .................................................................... 44

Parts Index ............................................................45

1




COMPACT

DIGITAL AUDIO


SVCD formats. MP3, WMA, JPEG, MPEG-1,

MPEG-2, ASF and DivX files written in accordance with the “ISO 9660” format can also be played.

• DVD-R/-RW, +R/+RW: Recorded in the DVD Video format. MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF and DivX files written in the UDF bridge format can also be played.

• DVD-R/-RW/-ROM: Recorded in the DVD Video





CD-G (CD-Graphics) and DVD/CD Text.


• In this manual, “file” and “track” are interchangeably used for MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF and

DivX operations.


About color system

This System accommodates the NTSC and PAL system and can playback discs recorded in either the NTSC or the PAL system.

• To change the color system, see page 15.


DVD players and DVDs have their own Region Code numbers. This System can playback only DVDs with an appropriate Region Code number.

For details, see “Specifications” on page 44.

EX.: For South East Asia









• Button and control operations are explained in the table

• below.

Some related tips and notes are explained later in the sections “Learning More about This System” and

“Troubleshooting,” but not in the same section explaining the operations ( INFO content has some information).

indicates that the


2

sec.

Remote

ONLY

Main Unit

ONLY

Indicates that you press the button repeatedly selected.

Indicates that you press and hold for a specified period.

briefly and

until an option you want is


the button




Audio formats




Packing)





2


Connections





Rear panel



• FM antenna (x1)



• Core filter* (x1)


• Batteries (x2)

• AC plug adapter (x1) (except for the Middle East)


~


See page 4.

Ÿ


See page 4.

!


See page 4.

⁄


See page 4.

Voltage selector: See page 5.

@


See page 5.

¤



• If the wall outlet does not match the AC plug, use the supplied AC plug adapter (except for the Middle East).

Front panel





*

Attaching the core filter to the USB cable to reduce interference

At the front panel

Stopper


• Keep close between the plug connected to the

System and the core filter.

• Do not damage the USB cable by applying excessive force when winding.


3


~



(not supplied)

SUB -

WOOFER

OUT



Ÿ

AM/FM antenna



Ω


!

TV/monitor


Red

Blue


AM loop antenna

(supplied)


(not supplied)


COMPONENT jacks.





⁄






Keep it connected.


(not supplied)


Protective cap


(not supplied)




4


@

Speakers


Insert

Press and hold

Red

Release




Before plugging in the System

Set the correct voltage for your area with the voltage selector on the rear.

220V

110V

VOLTAGE

SELECTOR

127V

230V-240V

Use a screwdriver to set the voltage selector to the same voltage as where you are plugging in the unit. (See also the back cover page.)

From left speaker


From right speaker

CAUTION:

Black






To the audio output

At the front panel


(not supplied)

R6(SUM-3)/AA(15F)







To the audio input

5





1 2 3 4 5 6 7 8 9 p q


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO

SLEEP

B.S.P. BONUS REC 1 2 3 w e r t y u i o ;














4 PG/PL indicators






6 USB indicator


7 AHB PRO indicator







p SLEEP indicator


q REC indicator

• Lights while recording.

w Playback mode indicators




–

1


–

–

GROUP

1 DISC





e Main display



• While selecting “TAPE”: “TAPE” appears.



r 3D PHONIC indicator t




y PRGR. (Progressive) indicator


u B.S.P. (Browsable Still Picture) indicator


i BONUS indicator


o Daily Timer indicators



• REC: lights when the Recording Timer stands by; flashes while working or being set.

; 2 3

(tape direction) indicators

– Lights to indicate the current tape running direction.

– Flashes slowly during playback and recording.

– Flashes quickly while rewinding or fast-forwarding a tape.

6



—Playback

Remote control


ENTER/SET

TOP MENU/PG

RETURN

2

1 , ¡

QP LINK

SHIFT

1

2

3

TV VOLUME

VOLUME

1

Number buttons

MENU/PL

, , ,

GROUP/TITLE SKIP

4

,

¢

FM/PLAY MODE

3


TAPE


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP



1

2




3

4
















4


7



INFO

Main Unit

ONLY





TUNER FM

TUNER AM

2







2 sec.

GROUP/TITLE SKIP

DOWN

2 sec.

UP


DOWN

AM 9KHZ

(9 kHz interval)





Remote

ONLY


PAGE

FM/PLAY MODE

(while holding...)

UP

(while holding...)

AM 10KHZ

(10 kHz interval)




Remote

ONLY



1

2





REC

1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

S.TURBO SLEEP



8


3 Select a preset number for the station you store.

DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 3

3

DISC 5 A.STANDBY

5

VFP

8

6

SLEEP

9


10 0

ZOOM

10

Examples:


5.


10.


10, 1, then 5.


10, 3, then 0.


¡

or

1

button.

4 Store the station.

ENTER/SET


REC

1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

S.TURBO SLEEP


Playing Back a Tape

To insert a tape

You can playback type I tapes.

Push Insert Close

To start:


To stop:


1 Select the band (FM or AM).

Remote

ONLY

TUNER FM

TUNER AM

2 Select the preset number for the station you stored.

DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 3

3

DISC 5 A.STANDBY

5 6

VFP

8


10 0

SLEEP

9

ZOOM

10

Examples:


5.


10.


10, 1, then 5.


10, 3, then 0.


When “TAPE” is not selected as the current source, press twice.

To rewind/fast-forward the tape:

Remote control:

GROUP/TITLE SKIP


Rewind the tape.

Main unit:

DOWN

Rewind the tape.

UP


9



INFO


• DVD Video/DVD-VR comprises of “ Titles ” which includes “ Chapters ,” DVD Audio/MP3/WMA/MPEG-1/

MPEG-2/ASF/DivX comprises of “ Groups ” which includes “ Tracks ,” JPEG comprises of “ Groups ” which includes “ Files ,” and CD/SVCD/VCD comprises of only

“ Tracks .”

• For playback of MP3/WMA/JPEG/MPEG-1/MPEG-2/

ASF/DivX, see also page 27.









, , , , ,


SCREEN GUIDE” in “OTHERS menu” on page 37.


Remote Control:

DISC 1

1

DISC 4

4

DISC 2

2

DISC 5

5

DISC 3

3

Playback starts.

(while holding...)

Main Unit:




DVD/CD

3







Remote

ONLY

Playback starts.

GROUP/TITLE SKIP

DVD/CD

To release, press

DVD/CD

3

.

• While playing DVD/SVCD/VCD/MP3/WMA/MPEG-1/

MPEG-2/ASF/DivX: This System can store the stop point, and when you start playback again by pressing DVD/CD

3

(even while on standby), it starts from the position where you have stopped—Resume Play. (“RESUME” appears on the display when you stop playback.)

To stop completely while Resume is activated, press

7 twice. (To cancel Resume, see “RESUME” on page 37.)



(while holding...)



10



• For VCD/SVCD, cancel PBC (see the right column).


GROUP/TITLE SKIP



7



TOP MENU/PG

RETURN ECHO

MENU/PL

Remote

ONLY



– SLOW + x2 x5

Remote

ONLY x10 x20

2

Select an item on the disc menu.

TV CH

KEY KEY

TV CH

ENTER/SET x60 x2 x5 x10 x20 x60


WMA/DivX discs. For MP3/WMA/DivX discs, search speed and the indications on the TV are different.



3

.

• For DivX, each time you press the > or < button, you can skip to a scene for 30 seconds or 5 minutes depending on the DivX file.

KEY KEY


7





Examples:




4 5 6


SCAN MODE VFP SLEEP

7 8


9

ZOOM

1, then 5.


10 0 10

3, then 0.

Remote

ONLY




DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 5

5

VFP

8


10 0

DISC 3

3

A.STANDBY

6

SLEEP

9

ZOOM

10

Examples:




1, then 5.


3, then 0.


GROUP/TITLE SKIP




TOP MENU/PG

RETURN

(while holding...)


7



7



3

.

11



INFO




Remote

ONLY


QP LINK

CLOCK/TIMER

QPLINK ON

QPLINK OFF

(while holding...)



Changes the source to LINE automatically. (If you change from LINE to another source, QP Link will be canceled.)




1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO

SLEEP





1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO

SLEEP




INFO




IMPORTANT






2



USB


At the front panel

PC

USB cable

4


3 m .











12




Remote control

VFP

SCAN MODE

LINE OUT LEVEL

A.STANDBY

SLEEP

DIMMER

DISPLAY

, , ,

FADE

MUTING

Remote

ONLY



ENTER/SET

DVD LEVEL

AHB PRO

3D PHONIC

CLOCK/TIMER

SHIFT

SOUND TURBO

Main unit

SOUND

TURBO

BASS/TREBLE

VOLUME

+,–

FADE

MUTING

VOLUME +,–


INFO



Turbo II.

SOUND

TURBO

TURBO ON

TURBO OFF




Remote

ONLY


DVD LEVEL

AHB PRO

AHB ON

AHB OFF



Remote

ONLY





(VOL MAX).


BASS/

TREBLE

BASS TREBLE

Canceled


BASS/

TREBLE

VOLUME

BASS TREBLE

Canceled

TV VOLUME

VOLUME

TV VOLUME

VOLUME

TV VOLUME

VOLUME

13



—3D Phonic

Remote

ONLY



3D PHONIC

AUDIO/MPX

(while holding...)








Increase Level

Remote

ONLY


• This only functions for DVD Video and DVD-VR format disc.

DVD LEVEL

AHB PRO

NORMAL MEDIUM

HIGH

(initial setting)

(while holding...)

NORMAL

MEDIUM

HIGH






Remote

ONLY

If the sound from the component connected to the LINE IN jack is too loud or is too quiet when changing from another source to LINE, you can change the audio input level through the LINE IN jack (without changing the volume level).

2 sec.

ENTER/SET

L.IN LVL1 L.IN LVL2

L.IN LVL3

(initial setting)

L.IN LVL1

L.IN LVL2

L.IN LVL3



Select this when listening to a portable audio device or recording the sound from it (initial setting).


Remote

ONLY



LINE OUT LEVEL

10

L.OUT LVL1

(initial setting)

L.OUT LVL2

(while holding...)

L.OUT LVL1

L.OUT LVL2



14




TV/VIDEO

DIMMER

DIMMER OFF

(Canceled)

DIMMER ON

AUTO DIM






Remote

ONLY

INFO





“PAL PROG.”

SCAN MODE

7

PAL PAL PROG

NTSC PROG NTSC

(while holding...)

NTSC

NTSC PROG

PAL

PAL PROG

ENTER/SET








TV CH

Remote

ONLY




VFP

8

NORMAL

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

0

0

0

0

0

0



KEY KEY

NORMAL CINEMA

USER2 USER1

NORMAL

CINEMA

USER1/USER2







1

2




TV CH

ENTER/SET

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS







(–8 to +8).


15



TV CH

ENTER/SET


Remote

ONLY

Auto Standby

TV CH


To erase the screen, press VFP again while holding SHIFT, or wait for more than 5 seconds.


Remote

ONLY




1


QP LINK

CLOCK/TIMER

INFO


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO SLEEP


A.STANDBY

6

On

Canceled

(while holding...)




Sleep Timer



2


Set the time.


ENTER/SET

KEY KEY


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.


SLEEP

9

(while holding...)

10 20 30 60 90 120 150

Canceled







DISPLAY

CANCEL

16

(while holding...)

Disc type

*

Clock

Source information

* This appears depending on the disc type.


Remote control

Number buttons

ANGLE

, , ,

DVD/CD 3

8

SLOW ,

AUDIO/MPX

SHIFT



Remote

ONLY

INFO

For DVD Video/DivX: While playing back a chapter containing audio languages, you can select the language to listen to.


For DVD-VR and Karaoke CD/SVCD/VCD: When playing back a track, you can select the audio channel to play.


(see page 23).

3D PHONIC

AUDIO/MPX

ZOOM

ENTER

/SET

7

PAGE

C.VOICE

SUBTITLE


Ex.:

1/3

ENGLISH

2/3

FRENCH

1/3

ENGLISH

2/3

FRENCH

3/3

JAPANESE

3/3

JAPANESE

While playing a DVD Audio/DivX...

Ex.:

1/3 2/3

1 2

3/3

3

While playing a DVD-VR, or Karaoke CD/SVCD/VCD...

3D PHONIC

AUDIO/MPX

SVCD

ST1

R2

ST2

L2

L1

R1

DVD-VR/Karaoke CD/VCD

ST L R

ST1/ST2/

ST

L1/L2/L

R1/R2/R





(ST1/ST2).

17



Remote

ONLY

For DVD Video/DivX: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV.




While playing a DVD Video/DivX...

1

C. VOICE

SUBTITLE

1/3

ENGLISH

1/3

ENGLISH


Remote

ONLY




Ex.:

1/3

1

(while holding...)

2/3

2

ANGLE

0

3/3

3

1/3

1

2/3

2

3/3

3

2

TV CH

Ex.:

1/3

ENGLISH

1/3

ENGLISH

TV CH

2/3

FRENCH

2/3

FRENCH


C. VOICE

SUBTITLE

ON

ON


C. VOICE

SUBTITLE

3/3

3/3

JAPANESE

OFF

OFF


Remote

ONLY




(see page 23).

(while holding...)

PAGE

FM/PLAY MODE


(if available).


Remote

ONLY





1





18



DISC 1

1

DISC 4

4

SCAN MODE

7

DISC 2

2

DISC 3

3

DISC 5 A.STANDBY

5

VFP

6

SLEEP

9 8

ANGLE

0

ENTER/SET



7

.


Remote

ONLY




C. VOICE

SUBTITLE

3D PHONIC

(On)

Off

(while holding...)


Pause playback

To pause:

While playing...

Remote

ONLY


DVD/CD

INFO






– SLOW

+


1/32 1/16 1/8 1/4 1/2

Reverse slow motion

* starts.

1/32 1/16 1/8 1/4



1/2




DVD-VR.

While playing back...

GROUP/TITLE


Zoom



ZOOM

10







(while holding...)


2


TV CH

KEY KEY

TV CH



19


Remote control

Number buttons

ZOOM

TOP MENU/PG

, , ,

DVD/CD

3

8

¡

REPEAT A-B

REPEAT

SHIFT

Main unit

DVD/CD 8

DVD/CD #

EJECT


CANCEL

MENU/PL

ENTER/SET

ON SCREEN

7

4 , ¢

FM/PLAY

MODE


Program Play

Remote

ONLY

INFO



• Program play cannot be used for DVD-VR/JPEG/

MPEG-1/MPEG-2/ASF/DivX.


1


PAGE

FM/PLAY MODE

PROGRAM

Canceled

RANDOM


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP


On the display

4 , 7 , ¢

PROGRAM

No

1

2

9

10

6

7

8

3

4

5




On the TV

2





3

4





2

3

Select tracks.



DISC 1

1

7

DISC 2

2

DISC 3

3

DISC 4

4

SCAN MODE

DISC 5 A.STANDBY

5

VFP

6

SLEEP

8 9


10 0

ZOOM

10

Examples:




1, then 5.


3, then 0.

20



DVD/CD


To skip a step:

GROUP/TITLE SKIP



Remote

ONLY


• Random Play cannot be used for DVD-VR/JPEG/

MPEG-1/MPEG-2/ASF/DivX and some DVDs.


PAGE

FM/PLAY MODE

PROGRAM RANDOM

Canceled

To release, press

DVD/CD

3

.



TV CH


TV CH



4

or

¢







Repeat step 2 .

DISPLAY

CANCEL



PAGE

FM/PLAY MODE

PROGRAM RANDOM

Canceled


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP



DVD/CD






4

.

To release, press

DVD/CD 3 .



PAGE

FM/PLAY MODE

PROGRAM RANDOM

Canceled

21



Remote

ONLY

INFO



• For MP3/WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX, see page 28.

Repeat Play



While playing...

REPEAT A-B

REPEAT

Canceled

1 GROUP

DISC ALL



REPEAT A-B

REPEAT 1 1 DISC

Canceled DISC ALL

• For DVD-VR:


REPEAT A-B

REPEAT

1 GROUP 1 DISC

A-B Repeat


• A-B Repeat cannot be used for MP3/WMA/MPEG-1/

MPEG-2/ASF/DivX and for some DVDs.


REPEAT A-B

REPEAT




(while holding...)


(while holding...)

REPEAT A-B

REPEAT


•

TV.

A-B appears on the


¡ button.



Canceled DISC ALL


REPEAT A-B

REPEAT 1

Canceled

GROUP

DISC ALL

1

GROUP

1 DISC

DISC ALL



DVD-VR).


Repeats all discs.


Main Unit

ONLY




(while holding...)


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.




22



Remote

ONLY

INFO


On-screen bars

DVD Video

1

DVD-VIDEO

Dolby D

3/2.1ch

2

DISC 1

CHAP.

TITLE 14 CHAP 23

1 / 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

3

4

DVD Audio

1 2

DVD-AUDIO

TIME

LPCM

2/0.0ch

OFF

DISC 1

TRACK


1 / 3 PAGE 1 / 3

3

4

DVD-VR

1 2 3

DVD-VR

TIME

Dolby D

2/0.0ch

OFF


CHAP.

ST ON

4

SVCD

1

SVCD

2

TITLE 14

/ 1/3

CHAP 23

1/3

TOTAL 1:25:58

1/3

3

4

VCD

1 2 3

VCD TITLE 14 CHAP 23

1/3

TOTAL 1:25:58

1/3

4

CD

1 2 3

CD TITLE 14 CHAP

1/3

23

1/3

TOTAL 1:25:58

1/3

4

MP3/WMA/JPEG/MPEG-1/MPEG-2/ASF/DivX

1 2 3

FILE CHAP 23 TOTAL 1:25:58


1 Disc type





DISC 1

TITLE 2

CHAP 3

GROUP

PG 2

PL 2

1

TRACK 14

TOTAL 1:25:58

Current disc

Current title

Current chapter

Current group



Current track

Time indications



Playback

/



Pause

Stop


Indication

TIME

OFF

Meanings



CHAP.

TRACK

1/3

1/3

1/3

PAGE 1 / 5






(see also page 18).


(see also page 18).


23






ON SCREEN

KARAOKE DVD-VIDEO

Dolby D

3/2.1ch


DVD-VIDEO

Dolby D

3/2.1ch


CHAP.

1 1/3 1 / 1/3


* This does not appear for MP3/WMA/JPEG/MPEG-1/

MPEG-2/ASF/DivX discs.

*


KEY KEY





DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14

CHAP.

1 /

CHAP

1/3

23

1 / 1/3

TOTAL 1:25:58

1 1/3

2

3



ENTER/SET

TIME 0:00:58

T. REM 0:35:24

REM 0:11:23

TOTAL 1:01:58

DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14

CHAP.

1 /

CHAP

1/3

23

1 / 1/3

TOTAL 1:25:58

1 1/3


ENTER/SET

DISC 1

CHAP.


1 1/3 1 / 1/3 1 1/3

ENGLISH


TV CH

DISC 1 TITLE 14

CHAP.

1

CHAP

1/3

23

2 / 1/3

TOTAL 1:25:58

1 1/3

TV CH

FRENCH


ENTER/SET



ON SCREEN

KARAOKE

TIME

REM

TOTAL

T.REM



Elapsed disc time.



ON SCREEN

KARAOKE

Repeat Play


2

3




DVD-VIDEO

Dolby D

3/2.1ch


CHAP.

1 / 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

OFF

24





GROUP

DISC





TRACK *

PG

PL

OFF








ENTER/SET

A-B Repeat


1

2

3



DVD-VIDEO

Dolby D

3/2.1ch


CHAP.

1 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

4


TV CH

TV CH

OFF

DVD-VIDEO

Dolby D

3/2.1ch

A–B

DISC 1 TITLE 14 C

CHAP.

1 1/3


Time Search


2

3



Select .


DVD-VIDEO

Dolby D

3/2.1ch

DISC 1 TITLE 14

CHAP.

TIME _ : _ _ : _ _

1 /

CHAP

1/3

23

1 / 1/3

TOTAL 1:25:58

1 1/3



DISC 1

1

DISC 4

7

DISC 2

2

DISC 3

3

4

SCAN MODE

DISC 5 A.STANDBY

5

VFP

8

6

SLEEP

9

ANGLE

0

Examples:








5


ENTER/SET



ENTER/SET

DVD-VIDEO

A-

Dolby D

3/2.1ch

DISC 1 TITLE 14 CH

CHAP.

1 / 1/3

6


ENTER/SET



¡

button.



1

2

3


Select CHAP.

or TRACK


.

DVD-VIDEO

Dolby D

3/2.1ch

OFF


CHAP.

CHAPTER _

1 / 1/3 1 / 1/3

TOTAL 1:25:58

1 1/3

25



DISC 1

1

DISC 4

7

DISC 2

2

DISC 3

3

4

SCAN MODE

DISC 5 A.STANDBY

5

VFP

8

6

SLEEP

9

ANGLE

0

Examples:






5


ENTER/SET






List:


TOP MENU/PG

RETURN ECHO

MENU/PL



ORIGINAL PROGRAM

No Date

1 03/12/06

2 09/12/06

3 18/12/06

4 20/12/06

5 25/12/06

6 28/12/06

Ch

L

L

L

L

L

L

Time

12:15

23:05

08:17

07:47

19:38

14:20

Title

La fleur


BOOM!

Mr. Lawrence

Satisfy U





2

3

1

While playing a DVD Audio, display the entire onscreen bar.


DVD-AUDIO

TIME

LPCM

2/0.0ch

OFF

DISC 1

TRACK


1 / 3 PAGE 1 / 5

1


TV CH

TV CH


1 / 3 PAGE 3 / 5

3


ENTER/SET

1 2 3 4


5

PLAY LIST

No Date Chap Length

1 03/12/06 002 0:23:24

2 15/12/06 004 1:04:39

3 24/12/06 013 0:41:26

4 27/12/06 017 0:09:08

Title

Nebula G.

CDJ

Secret Garden

S. Walker

6

1 2 7 8

1

2

3

4

5

6

7

8

Listed number

Recording date

Recording channels

Recording time

Title


Chapters included

Playback time


TV CH

ENTER/SET

6

TV CH

26



Remote

ONLY

INFO

You can search for and play the desired items through the control screen for MP3/WMA/JPEG/MPEG-1/MPEG-2/

ASF/DivX discs.

Control screen for MP3/WMA/JPEG/MPEG-1/

MPEG-2/ASF/DivX discs

The control screen automatically appears on the TV screen when you load an MP3, WMA JPEG, MPEG-1, MPEG-2,

ASF or DivX disc.


1

6

7

8

9

2

3

4

Group : 2 / 3

Spring

Summer

Fall

Winter

Track Information

Title

Rain

Artist

Album



Cloudy.mp3

Fair.mp3

Fog.mp3

Hail.mp3

Indian summer.mp3

Rain.mp3

Shower.mp3

Snow.mp3

Thunder.mp3

Typhoon.mp3

Wind.mp3

Winter sky.mp3

0

-

5

1

2

3

4

5

6

7

8

9

0

-


Current group

Group list


MP3/WMA)

Current track

Repeat Play setting


(except for JPEG)

Operation mode icon


Highlight bar

Track list

• If files of different types (MP3, WMA, JPEG,

MPEG-1, MPEG-2, ASF and DivX) are recorded on a disc, select the file type to play (see page 36).


KEY KEY




TV CH

TV CH





For JPEG:

ENTER/SET


DVD/CD




ENTER/SET


• Pressing DVD/CD

3 starts playback.

also

• Once you start playing back a JPEG/MPEG-1/MPEG-2/

ASF/DivX track, the control screen disappears.


8

.

27


To select a group (for MP3/WMA/JPEG/MPEG-1/

MPEG-2/ASF/DivX):

GROUP/TITLE SKIP






8


(while holding...)


GROUP/TITLE SKIP


ZOOM

10

ZOOM 1

ZOOM OFF

ZOOM 2

(while holding...)

2 Move the zoomed-in position.

TV CH




REPEAT A-B

REPEAT

1 GROUP 1 DISC

KEY

TV CH

KEY


Canceled DISC ALL



REPEAT A-B

REPEAT GROUP

Canceled

1 DISC

DISC ALL

To repeat MPEG-1/MPEG-2/ASF/DivX playback


REPEAT A-B

REPEAT

1 GROUP 1 DISC

Canceled

DISC ALL

1

GROUP

1 DISC

DISC ALL




Repeats all discs.

28


Remote control

FM/AM

DVD/CD 3

7

Main unit


IMPORTANT

It may be unlawful to record or playback copyrighted material without the consent of the copyright owner.

Recording on a Tape

INFO

You can use type I tapes for recording.

• To play a tape, see page 9.

1 Insert a recordable cassette.

Push Insert Close

USB

LINE

TAPE


2 Select and start playing the source—“FM,” “AM,”

“DVD/CD,” “USB,” or “LINE.”

• When recording a disc, you can also use “Synchronized

Disc Recording” (see page 30).


REC

To stop recording:

On the main unit

PUSH OPEN

0

REC

DVD/CD

8

DVD/CD #

FM/AM

TAPE

7

USB

LINE

29


Synchronized Disc Recording

INFO

You can start and stop both disc play and tape recording at the same time.

To record the entire disc

1 Load a disc and insert a recordable cassette.

• If the current playing source is not the disc player, press

DVD/CD

3

, then

7

.


REC

The System automatically creates 4-second blanks between the tunes recorded on the tapes.

On the main unit

• When either disc play* or recording ends, both disc player and the cassette deck stop at the same time.

* For DVD Video: When a title is finished playing.

To record Program Play

1 Select Program Play (and make a program), but do not start playback.

2 Press REC to start recording.

• When disc play stops, recording stops automatically.

To record only your favorite track

You can specify tracks to be recorded on the tape while listening to a disc (except for DVD Video/DVD-VR).

1 Start playing a disc.

DVD/CD

2 While a track you want to record on the tape is playing...

REC

On the main unit

The disc player returns to the beginning of that track and the track is recorded on the tape.

After recording the track, the disc player and cassette deck automatically stop.

3 Repeat steps 1 and 2 to record other tracks you want.

• You can change the disc if necessary.

To protect your recording

Cassettes have two small tabs on the back to protect from unexpected erasure or re-recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with adhesive tape.

30


Remote control

RESERVE

FM/AM

DVD/CD 3

7

AUDIO/MPX

SHIFT

Main unit

MIC jack

MIC VOLUME

REC

DVD/CD

8

DVD/CD

#

FM/AM

Enjoying Karaoke

ECHO

KARAOKE

LINE

TAPE

USB

IMPORTANT

Always set MIC VOLUME to MIN when connecting or disconnecting the microphone.

DO NOT keep the microphone connected while they are not in use.

Singing Along (Karaoke)

INFO

To sing along using the Karaoke discs

You can enjoy Karaoke using the Karaoke disc (except

Karaoke CD).

• By pressing REC, you can record your singing-along (for

SVCD/VCD without PBC).

1

Turn MIC VOLUME to MIN.

VOLUME

MIN MAX

2

Connect the microphone (not supplied) to the MIC jack.

MIC VOLUME

MIN

3

4

Insert and start playing a Karaoke disc.

Select an audio track.

3D PHONIC

AUDIO/MPX

MAX

TAPE

7

USB

LINE

VOLUME

5

6

• For details, see “Selecting the Audio Track” on page 17.

Sing into the microphone.

Adjust the MIC VOLUME and VOLUME.

VOLUME VOLUME

MIN MAX

31


To adjust the Key (disc playback only)

1

Activate Key Control.

ON SCREEN

KARAOKE

KEYCON V.MASKING

OFF

(Canceled)

2

(while holding...)

Adjust the Key

KEY KEY

To raise the key.

To lower the key.

(while holding...)

• Key Control cannot be activated for DVD Audio/

DVD-VR/MPEG-1/MPEG-2/ASF/DivX.

To deactivate Key Control, press KARAOKE (while holding SHIFT) to select “OFF.”

To apply echo to your voice

4 Activate Vocal Masking.

ON SCREEN

KARAOKE

KEYCON V.MASKING

OFF

(Canceled)

5

6

(while holding...)



VOLUME VOLUME

MIN MAX

• You can apply echo to your voice.

To deactivate Vocal Masking, select “OFF” in step 4 .

Microphone Mixing

You can enjoy microphone mixing while playing any source.

• By pressing REC, you can record your singing-along

(except when the playing source is “TAPE”).

1

Turn MIC VOLUME to MIN.

VOLUME

ECHO

MENU/PL

ECHO ON

ECHO OFF

(Canceled)

(while holding...)

To sing along using the stereo discs

—Vocal Masking

You can enjoy Karaoke while playing a stereo disc.

Vocal Masking reduces the lead vocal of any disc except

DVD Audio and DVD-VR.

1 Turn MIC VOLUME to MIN.

VOLUME

MIN MAX

2


3 Start playing the source—“FM,” “AM,” “DVD/CD,”

“USB,” “TAPE,” or “LINE.”

4

5



VOLUME VOLUME

MIN MAX

2


3

Insert and start playing a stereo disc.

DVD/CD

MIN MAX

• You can apply echo to your voice. While playing a disc, you can also adjust Key Control and apply echo.

32


Reserving Karaoke Songs

—Karaoke Program Play

Remote

ONLY

You can determine the playback order of the titles or tracks on the disc player. You can program up to 12 steps.

1

Change the source to “DVD/CD.”


DVD/CD



During Karaoke Program Play...

DVD/CD

SET UP

RESERVE

The Karaoke reserve screen appears.

2 Activate Karaoke Program Play.

(while holding...)

SET UP

RESERVE

(while holding...)

No

1

2

3

4

5

Disc Gr/Tt Tr/Chap

On the TV screen

3

• PRGM indicator flashes during this mode.

Select songs you want for Karaoke Program Play.

Press the number buttons to select a song in the following order.

1 Select a disc.

2 Select a title/group.

3 Select a chapter/track.

DISC 1

1

DISC 4

4

DISC 2

2

DISC 5

5

DISC 3

3

A.STANDBY

6

Examples:




SCAN MODE VFP SLEEP

7


10

8

0

9

ZOOM

10

1, then 5.


3, then 0.


While the Karaoke reserve screen is shown on the TV...

To remove the unwanted track:

TV CH

TV CH

DISPLAY

CANCEL


Repeat step 3 .


2 sec.

DISPLAY

CANCEL

To exit from Karaoke Program Play


SET UP

RESERVE

(while holding...)

During playback...

SET UP

RESERVE

(while holding...)

33


Remote control

,



REC TIMER (Recording Timer) ON time, DAILY 1

ON time, DAILY 2 ON time or DAILY 3 ON time.

QP LINK

CLOCK/TIMER

AUDIO

CANCEL

ENTER/SET

Recording Timer

REC TIMER

ON (Time)

Canceled

Daily Timer 1

DAILY 1

ON (Time)

Clock setting

(see page 16)

Daily Timer 2

DAILY 2

ON (Time)

ON (Time)

DAILY 3

Daily Timer 3


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.


CLOCK

/TIMER


2

• When the clock has not been set, pressing

CLOCK/TIMER makes the System enter the clock setting mode.



KEY KEY

ENTER/SET


Remote

ONLY

INFO

Using Daily Timer, you can wake up with your favorite music. On the other hand, with Recording Timer, you can make a tape of a radio broadcast or the sound from LINE IN automatically.

You can store three Daily Timer settings and one Recording

Timer setting; however, you can activate only one of the timers at the same time.




Recording Timer and Daily Timer initial settings when shipped from the factory

• REC TIMER: ON Time (6:00)/OFF Time (10:00)/








For Recording Timer:


2

3



4

“TUNER-AM,” or “LINE IN.”

For “TUNER-FM” and “TUNER-AM”: Select a

5 preset channel.



(“0” to “40” and “VOL – –”).


For Daily Timers:


2 Set the hour then the minute for off-time.

3 Select the playback source—“TUNER-FM,”

“TUNER-AM,” “TAPE,” “DISC,” or “LINE IN.”


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

REC

S.TURBO SLEEP


4 For “TUNER-FM” and “TUNER-AM”: Select a preset channel.

34


3

5




(“0” to “40” and “VOL – –”).




Turn off the unit (on standby) if you have set the on-time.




1 Select the Timer (REC TIMER, DAILY 1, DAILY 2, or DAILY 3) you want to cancel.

QP LINK

CLOCK/TIMER

Recording Timer

REC TIMER

ON (Time)

Canceled

Daily Timer 1

DAILY 1

ON (Time)

Clock setting

(see page 16)

Daily Timer 2

DAILY 2

ON (Time)

ON (Time)

DAILY 3

Daily Timer 3


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

REC

S.TURBO SLEEP

PRGR.


Ex. To cancel Daily

Timer 1










How Recording Timer works

When Recording Timer has been set, Timer ( ) indicator and the REC indicator are lit on the display.

Recording Timer works only once.


The System turns on, tunes in to the specified station or changes the source to “LINE”, and starts recording.


The System stops recording, and turns off (on standby).


2


1 Select the Timer (REC TIMER, DAILY 1, DAILY 2, or DAILY 3) you want to activate.

QP LINK

CLOCK/TIMER

Recording Timer

REC TIMER

ON (Time)

Canceled

Daily Timer 1

DAILY 1

ON (Time)

Clock setting

(see page 16)

Daily Timer 2

DAILY 2

ON (Time)

ON (Time)

DAILY 3

Daily Timer 3


ENTER/SET


1 DISC ALL A–B

GROUP RANDOM

QP Link

PRGM

PG PL USB

3D PHONIC

AHB PRO

PRGR.

A.STBY

REC

S.TURBO SLEEP


3

Turn off the selected Timer.

DISPLAY

CANCEL


Wait until the indication disappears.

35


Remote Control

, , ,

SET UP


INFO


Remote

ONLY


1 Press SET UP.

LANGUAGE

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE


ENGLISH

ENGLISH

ENGLISH

ENGLISH

ENTER/SET

2 or ) to select the menu.

3

4

5




ENTER/SET.




Press SET UP.

LANGUAGE menu

Item

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE


PICTURE menu

Item

MONITOR TYPE

16:9 4:3 LB

4:3 PS

PICTURE SOURCE

SCREEN SAVER

FILE TYPE

Contents




You can select “ENGLISH,” “CHINESE,” or “SPANISH” as the on-screen language.

Contents


16:9/16:9 MULTI (Wide television screen): For a wide-screen (16:9) TV.

4:3 LB/4:3 MULTI LB (Letter Box conversion): For a conventional (4:3) TV. Displays a wide-screen picture to fit the width of the TV screen keeping the aspect ratio.

4:3 PS/4:3 MULTI PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed in to fill the screen vertically and the left and right sides of the picture are cut off.

• For multi-color system TVs, select the [MULTI] option.










VIDEO: To play MPEG-1, MPEG-2, ASF and DivX files.

36


AUDIO menu

Item


DOWN MIX


Contents






ONLY.”






OTHERS menu

RESUME

Item

ON SCREEN GUIDE

DivX REGISTRATION

Contents





The System has its own Registration Code.

If necessary, you can confirm it.

Once you have played back a disc in which the Registration Code is recorded, the System’s

Registration Code is overwritten for copyright protection.

37




Connections






















(then stops)














Random Play.





Level 2.











38





• For MPEG-1/MPEG-2 playback...

– The stream format should conform to MPEG system/ program stream.

– 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is recommended for the highest resolution.

– This System also supports the resolutions of 352 x 576/

480 x 576/ 352 x 288 pixels (25 fps) and 352 x 480/ 480 x 480/ 352 x 240 pixels (30 fps).

– The file format should be MP@ML (Main Profile at

Main Level)/SP@ML (Simple profile at Main Level)/

MP@LL (Main Profile at Low Level).

– Audio streams should conform to MPEG1 Audio layer-2 or MPEG2 Audio Layer-2.

• For ASF playback...

– This System can play back ASF files with the extension code <.asf> (regardless of the letter case—upper/lower).

– This System supports ASF files whose resolution is

352 x 288 pixels or less.

– Some recorded files may not be able to playback depending on file characteristics, kind of digital camera/ video camera, or recording conditions.


Replay, Slow motion, A-B Repeat, Program Play and

Random Play.

• For DivX playback...


“Multi-border” is not supported.

– The System supports DivX files whose resolution is 720 x 480 pixels or less (30 fps), and 720 x 576 pixels or less

(25 fps).

– Audio stream should conform to MPEG1 Audio Layer-2 or MPEG Audio Layer-3 (MP3).

– This System can play back DivX files with the extension code <.divx> <.div> <.avi> (regardless of the letter case—upper/lower).

– The System does not support GMC (Global Motion

Compression).

– The file encoded in the interlaced scanning mode may not be played back correctly.


Replay, Slow motion, A-B Repeat, Program Play,

Random Play and on-screen operations.
















• Check if your PC equipped with the CD-ROM drive is running on Windows R 98*, Windows R 98SE*,

Windows R Me*, Windows R 2000*, or Windows R XP* and prepare its CD-ROM.

*Microsoft R , Windows R 98, Windows R 98SE,



















39
























Recording on a Tape:

• The recording level is automatically set correctly. Thus, you can adjust the sound you are actually listening to without affecting the recording level.

• There is leader tape which cannot be recorded onto at the start and end of cassette tapes. Thus, when recording CDs or radio broadcasts, wind the leader tape first to ensure that the recording will be made without any music part lost.

• If you start recording with no cassette inserted, “NO REC” appears on the display. If a protected tape has been inserted, “NO REC” appears.

• You cannot open or close the disc tray while recording a disc.

Synchronized Disc Recording:

• Synchronized recording does not function on the file format of MPEG-1, MPEG-2, ASF, and DivX.

Enjoying Karaoke


Singing Along (Karaoke):

• Karaoke mode setting (Key Control and Vocal Masking) can be used when selecting “DVD/CD” as the source, except for DVD-VR/DVD Audio/MPEG-1/MPEG-2/ASF/

DivX discs.

Even if the source is “DVD/CD,” Karaoke mode setting cannot be used while “NO DISC” appears on the display.

• Karaoke mode setting is automatically canceled when the source is changed.

• Even when the microphone is not used, Key Control and

Vocal Masking are available.

• Karaoke mode setting is also applied to the optical digital output signals.

• When Vocal Masking is activated, 3D Phonic will be canceled temporarily.

• On some music discs, Vocal Masking does not provide the correct effect.

• You can also use the microphone when selecting the source other than “DVD/CD.”







Timer Priority:




General:


LANGUAGE menu:




• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size may become 4:3 letter box while playing a disc. This depends on how the discs are recorded.

• When you select “16:9/16:9 MULTI” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.




40


Troubleshooting

General:


]



]







]

]






]



]

Select “4:3 LB/4:3 MULTI LB” for “MONITOR TYPE”

(see page 36).



]

]

]






]

You have inserted a disc whose Region Code is not correct. (“REGION ERR” appears on the display.)

] The disc is placed upside down. Place the disc with the label side up.


]




]


MP3, WMA, JPEG, MPEG-1, MPEG-2, ASF or DivX files are not played back.

] The disc may include different types of tracks (MP3/

WMA files, JPEG files and MPEG-1/MPEG-2/ASF/

DivX files). In this case, you can only playback the files selected by the “FILE TYPE” setting (see page 36).

]




]


Audio discs.


] Some DVD Audio discs prohibit downmixed output.



]

The disc is scratched or dirty.


]





]

]



Tape Operations:

The cassette holder cannot be opened.

]

Power supply from the AC power cord has been cut off while the tape was running. Turn on the System.

USB Operations:


]


Playback stops.

]

]

]






]




]

]



41


Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish

Bhutani

Greek

Esperanto

Estonian

Basque

Afar

Abkhazian

Afrikaans

Ameharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali, Bangla

DA

DZ

EL

EO

ET

EU

BO

BR

CA

CO

CS

CY

AY

AZ

BA

BE

BG

BH

BI

BN

AA

AB

AF

AM

AR

AS


Persian

Finnish

Fiji

Faroese

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Hebrew

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

IN

IS

IW

JI

JW

KA

KK

KL

HR

HU

HY

IA

IE

IK

FA

FI

FJ

FO

FY

GA

GD

GL

GN

GU

HA

HI

KM

KN

KO

KS

KU

KY

LA

LN

LO

LT

LV

MG

Cambodian

Kannada

Korean (KOR)

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laothian

Lithuanian

Latvian, Lettish

Malagasy

MI

MK

ML

MN

MO

MR

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

MS

MT

MY

NA

NE

NL

Malay (MAY)

Maltese

Burmese

Nauru

Nepali

Dutch

NO Norwegian

OC Occitan

OM (Afan) Oromo

OR Oriya

PA Panjabi

PL Polish

PS Pashto, Pushto

PT Portuguese

QU Quechua

RM Rhaeto-Romance

RN Kirundi

RO Rumanian

RW Kinyarwanda

SA Sanskrit

SD Sindhi

SG Sangho

SH Serbo-Croatian

SI Singhalese

SK Slovak

SL Slovenian

SM Samoan

SN Shona

SO Somali

SQ Albanian

SR Serbian

SS Siswati

ST Sesotho

SU Sundanese

SV Swedish

SW Swahili

TA Tamil

TE Telugu

TG Tajik

TH Thai

TI Tigrinya

TK Turkmen

TL Tagalog

TN Setswana

TO Tonga

TR Turkish

TS Tsonga

TT Tatar

TW Twi

UK Ukrainian

UR Urdu

UZ Uzbek

VI Vietnamese

VO Volapuk

WO Wolof

XH Xhosa

YO Yoruba

ZU Zulu

Maintenance

To get the best performance of the System, keep your discs, tapes and mechanism clean.

Handling discs

















Holes

Speaker grille

Projection

42



DIGITAL AUDIO

OUTPUT

Playback disc






SVCD, VCD, CD

CD with DTS

MP3/WMA/MPEG-1/MPEG-2/DivX

ASF

STREAM/PCM

DTS bitstream

Output Signals









DTS bitstream

PCM ONLY













Remote control

TV Turn on/off TV.


TV CH ,


TV/VIDEO


Adjust the volume.


TV CH ,

TV

TV/VIDEO

SHIFT

TV VOLUME

+,–

43


Specifications


Output Power: 160 W (80 W+80 W) at 6

Ω

(10% THD)


500 mV/49 k Ω

250 mV/49 k

Ω


125 mV/49 k

Ω



MIC:

1.6 mV/10 k

Ω

Audio Output LINE OUT:

1.0 Vrms (3 k Ω)

500 mVrms (1.5 k


Ω)

HEADPHONES OUT:


SUBWOOFER OUT: 260 mVrms/3.9 k

Ω

17 mW/32 Ω


USB input:

–21 dBm to –15 dBm (660 nm ±30 nm)

USB AUDIO

Video output:

Color system: NTSC or PAL(interlaced/progressive)

VIDEO (composite): 1 V(p-p)/75

Ω

S-VIDEO:Y (luminance) 1 V(p-p)/75

Ω


NTSC

PAL

COMPONENT: (Y)

Speaker impedance:

(P

B


/P

R

)

0.286 V(p-p)/75

Ω

0.3 V(p-p)/75

Ω

1 V(p-p)/75 Ω

0.7 V(p-p)/75

Ω

6

Ω

– 16

Ω

16 Ω – 1 k Ω

Tuner section

FM tuning range: 87.5 MHz – 108.0 MHz

AM (MW) tuning range:



For Saudi Arabia only:



Tape section

Frequency response:

Wow and flutter:

60 Hz – 14 000 Hz

0.15 % (WRMS)


Region codes: Middle East: 2

South East Asia: 3






+R/+RW(DVD Video format)


Dynamic range:


Wow and flutter:

80 dB

500 lines

Immeasurable

General

Power requirement:

AC 110 V/AC 127 V/AC 220 V/ AC 230 V-240 V

(adjustable with the voltage selector), 50 Hz/60 Hz

Power consumption: 95 W (at operation)


18 W (at standby)


175 mm x 250 mm x 411 mm

Mass (approx.):

(W/H/D)

7.9 kg


Speaker units: Tweeter: 1.5 cm dome x 1

Impedance:

Squawker:

Woofer:


4 cm cone x 1

13.5

cm cone x 1

6 Ω

166 mm x 250 mm x 232 mm

Mass (approx.):

(W/H/D)

2.8 kg each


See page 3.






• “Official DivX

®

Certified product” “Plays all versions of DivX

® video (including DivX

®

6) with standard playback of DivX

® media files” “DivX, DivX certified, and associated logos are trademarks of DivX, Inc. and are used under licence.”

• USE OF THIS PRODUCT IN ANY MANNER THAT

COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS

PROHIBITED, EXCEPT FOR USE BY A CONSUMER

ENGAGING IN PERSONAL AND NON-COMMERCIAL

ACTIVITIES.














CENTER.”

44


Parts Index

Remote control

Button

7777

¡

8888

,

AUDIO

TV

,

,

1

4

,

C.VOICE

,


, ENTER/SET 8 t x

Number buttons

3D PHONIC

AHB PRO

ANGLE

AUDIO/MPX

A.STANDBY

BASS/TREBLE

1 y u

6 y d

.

CANCEL

CLOCK/TIMER

DIMMER


DISPLAY

DVD LEVEL

DVD/CD 3

ECHO

FADE MUTING

FM/PLAY MODE

FM/AM

GROUP/TITLE


KARAOKE

KEY

LINE

LINE OUT LEVEL

MENU/PL

ON SCREEN

PAGE

QP LINK

REPEAT

REPEAT A-B

RESERVE

RETURN

SCAN MODE

SET UP

SHIFT

SLEEP

SLOW

SOUND TURBO II

SUBTITLE

TAPE

TOP MENU/PG

TV CH

9

,

(


TV/VIDEO

USB

VFP

9

,

(

VOLUME + , –

ZOOM

Page

7, 35

43

10, 11, 19, 21, 28, 29, 30, 33

9, 11

9, 11, 21, 28

10, 19, 21, 27

9, 11, 14, 15, 16, 18, 19, 21, 24 – 28, 33 – 36

19

19

9, 11, 19, 20, 25, 26, 33

14

13

18

17

16

13 h i f

2 h u q k

, n

21, 33, 34, 35

16, 34, 35

15

10

16

14

7, 10, 11, 21, 27, 30, 32, 33

32

13 p x v l

8, 20, 21

7, 8, 9

10, 28

10, 28

32

8 z

5 k l n i

32

7

14

11, 26

24

18

12 b b

9

22, 28

22

33

7

3

11

15

9 36 o 10, 11, 12, 14, 15, 16, 18, 19, 22, 28, 32, 33, 43 g 16 r 19

; 13 t 18 c 7, 9

7 11, 26

8 43 m 43 f 43

/ 7, 12, 32

4 15 m 7, 13 j 19, 28

Main unit

Button

& STANDBY lamp

7777

Cassette holder

4

#

~


Display

DVD/CD

FM/AM

#

DVD/CD 8888

3

7

6

8

LINE


^

(

MIC jack

MIC VOLUME

1

=

PHONES

REC

-

9

Remote sensor

SOUND TURBO II

2

5

Page

7, 8

8, 10, 22

9, 29

10, 22

6

7, 8, 10, 27, 30

10, 27

8

7

5

31, 32

31, 32

7

29, 30

5

13

TAPE

UP

¢

, DOWN

4

USB

USB AUDIO jack

VOLUME + , –

Remote control

1

Main unit

1

2

6

7

8

9

3

4

5

0

2

3 r t y u

4

5

6

7

8

9 p q w e i o

;

-

!

7, 9

@$ 8, 9, 11, 21

% 12

*

&

12

13, 31, 32

7

10

1

4

8

0

2

5

9

10

3

6


(see page 43).

=

~

!

@

#

$

%

^

&

*

( l

/ z x c v b n m

,

.

f g h j k a s d

45

Cover[U].fm Page 2 Tuesday, March 28, 2006 4:08 PM

Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada,

Australia, and U.K.)

EN

© 2006 Victor Company of Japan, Limited

220V

110V

VOLTAGE

SELECTOR

127V

230V-240V

CAUTION for mains (AC) line

BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with the position of the voltage selector switch provided on the outside of this equipment and, if different, reset the voltage selector switch, to prevent from a damage or risk of fire/electric shock.

0406WMKMDCJEM

No results