Creating 3-dimentional Sound Field—3D Phonic. JVC SP-UXG70

UX-G70[UJ].book Page 14 Monday, May 8, 2006 1:35 PM

Creating 3-dimentional Sound Field

—3D Phonic

Remote

ONLY

While playing a disc...

3D PHONIC

AUDIO/MPX

(while holding...)

3D PHONIC ACTION 3D PHONIC DRAMA

3D PHONIC OFF 3D PHONIC THEATER

• The selected mode can only be shown on the TV.

ACTION Suitable for action movies and sports programs.

DRAMA Creates natural and warm sound. Enjoy movies in a relaxed mood.

THEATER Enjoy sound effects like in a major theater.

Presetting Automatic DVD Video Sound

Increase Level

Remote

ONLY

DVD Video sound is sometimes recorded at a lower level than other discs and sources. You can set the increase level for the currently loaded DVD Video, so you do not have to adjust the volume when you change the source.

• This only functions for DVD Video.

DVD LEVEL

AHB PRO

NORMAL MEDIUM

HIGH

(initial setting)

(while holding...)

NORMAL

MEDIUM

HIGH

Original recording level.

Output level is increased (less than “HIGH”).

Output level is increased (more than

“MEDIUM”). (initial setting)

Adjusting the Audio Input Level

Remote

ONLY

If the sound from the component connected to the

LINE IN jack is too loud or is too quiet when changing from another source to LINE, you can change the audio input level through the LINE IN jack (without changing the volume level).

2 sec.

ENTER/SET

L.IN LVL1 L.IN LVL2

L.IN LVL3

(initial setting)

L.IN LVL1

L.IN LVL2

L.IN LVL3

Select this when the sound is too loud with “L.IN LVL 2” selected. This setting is recommended when connecting an audio device other than a portable audio device to the LINE IN jack.

Select this when the sound is too loud with “L.IN LVL 3” selected.

Select this when listening to a portable audio device (initial setting).

Adjusting the Audio Output Level

Remote

ONLY

If the recorded sound on the device connected to the LINE

OUT jack is too loud or too quiet, you can change the audio output level through the LINE OUT jack (without changing the volume level).

LINE OUT LEVEL

10

L.OUT LVL1

(initial setting)

L.OUT LVL2

(while holding...)

L.OUT LVL1

L.OUT LVL2

Select this when recording the sound with a portable audio device (initial setting).

Select this when the recorded sound is too loud with “L.OUT LVL 1” selected.

14