advertisement
UX-G70[A].book Page 31 Wednesday, May 10, 2006 1:55 PM
Remote control
,
Timer Operations
1 Select one of the timer setting modes you want to set—
REC TIMER (Recording Timer) ON time, DAILY 1
ON time, DAILY 2 ON time or DAILY 3 ON time.
QP LINK
CLOCK/TIMER
AUDIO
CANCEL
ENTER/SET
Recording Timer
REC TIMER
ON (Time)
Canceled
Daily Timer 1
DAILY 1
ON (Time)
Clock setting
(see page 16)
Daily Timer 2
DAILY 2
ON (Time)
ON (Time)
DAILY 3
Daily Timer 3
MP3 WMA MONO ST TA NEWS INFO A.STBY
1 DISC ALL A–B
GROUP RANDOM
QP Link
PRGM
PG PL USB
3D PHONIC
AHB PRO
REC
S.TURBO SLEEP
PRGR.
B.S.P. BONUS REC 1 2 3
CLOCK
/TIMER
Ex. When Daily Timer 1 setting mode is selected
2
• When the clock has not been set, pressing CLOCK/
TIMER makes the System enter the clock setting mode.
Make the timer setting as you want.
Repeat the procedure for the following settings until finished:
ENTER/SET
Setting the Timer
Remote
ONLY
INFO
Using Daily Timer, you can wake up with your favorite music. On the other hand, with Recording Timer, you can make a tape of a radio broadcast or the sound from LINE IN automatically.
You can store three Daily Timer settings and one Recording
Timer setting; however, you can activate only one of the timers at the same time.
• To exit from the timer setting, press CLOCK/TIMER as required.
• To correct a mis-entry during process, press CANCEL.
You can go back to the previous step.
Recording Timer and Daily Timer initial settings when shipped from the factory
• REC TIMER: ON Time (6:00)/OFF Time (10:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 1: ON Time (6:00)/OFF Time (8:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 2: ON Time (12:00)/OFF Time (14:00)/
Source (TUNER FM 1)/Volume level (– –)
• DAILY 3: ON Time (18:00)/OFF Time (20:00)/
Source (TUNER FM 1)/Volume level (– –)
For Recording Timer:
1 Set the hour then the minute for on-time.
2
3
Set the hour then the minute for off-time.
Select the playback source—“TUNER-FM,”
4
“TUNER-AM,” or “LINE IN.”
For “TUNER-FM” and “TUNER-AM”: Select a
5 preset channel.
Select the volume level.
• You can adjust the volume level
(“0” to “40” and “VOL – –”).
If you select “VOL – –,” the volume is set to the last level when the unit has been turned off.
For Daily Timers:
1 Set the hour then the minute for on-time.
2 Set the hour then the minute for off-time.
3 Select the playback source—“TUNER-FM,”
“TUNER-AM,” “TAPE,” “DISC,” or “LINE IN.”
1 DISC ALL A–B
GROUP RANDOM
MP3 WMA MONO ST TA NEWS INFO
QP Link
PRGM
PG PL USB
3D PHONIC
AHB PRO
PRGR.
A.STBY
REC
S.TURBO SLEEP
B.S.P. BONUS REC 1 2 3
4 For “TUNER-FM” and “TUNER-AM”: Select a preset channel.
For “DISC”: Select the disc tray number, the title/ group number, then the chapter/track number.
31
UX-G70[A].book Page 32 Wednesday, May 10, 2006 1:55 PM
3
5 Select the volume level.
• You can adjust the volume level
(“0” to “40” and “VOL – –”).
If you select “VOL – –,” the volume is set to the last level when the unit has been turned off.
Once settings are complete, the Timer setting information appears in sequence.
• This function is not available for VCD with PBC activated.
Turn off the unit (on standby) if you have set the on-time.
To turn on or off the Timer
Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days.
To cancel the Timer
1 Select the Timer (REC TIMER, DAILY 1, DAILY 2, or DAILY 3) you want to cancel.
QP LINK
CLOCK/TIMER
Recording Timer
REC TIMER
ON (Time)
Canceled
Daily Timer 1
DAILY 1
ON (Time)
Clock setting
(see page 16)
Daily Timer 2
DAILY 2
ON (Time)
ON (Time)
DAILY 3
Daily Timer 3
MP3 WMA MONO ST TA NEWS INFO A.STBY
1 DISC ALL A–B
GROUP RANDOM
QP Link
PRGM
PG PL USB
3D PHONIC
AHB PRO
REC
S.TURBO SLEEP
PRGR.
B.S.P. BONUS REC 1 2 3
Ex. To cancel Daily
Timer 1
2 Turn off the selected Timer.
DISPLAY
CANCEL
How Daily Timer works
Once the Daily Timer has been set, the timer indicator
( ) and timer number indicator (1/2/3) are lit on the display. Daily Timer is activated at the same time everyday until the timer is turned off manually (see the next column) or another timer is activated.
When the on-time comes
The System turns on, tunes in to the specified station or starts playing the loaded disc with the specified chapter or track, and sets the volume level gradually to the preset level after about 30 seconds.
• While Daily Timer is working, the timer indicator ( ) and timer number indicator (1/2/3) flash on the display.
When the off-time comes
The System stops playback, and turns off (on standby) automatically.
• The timer setting remains in memory until you change it.
How Recording Timer works
When Recording Timer has been set, Timer ( ) indicator and the REC indicator are lit on the display.
Recording Timer works only once.
When the on-time comes
The System turns on, tunes in to the specified station or changes the source to “LINE”, and starts recording.
When the off-time comes
The System stops recording, and turns off (on standby).
• The timer setting remains in memory until you change it.
To turn on the Timer
1 Select the Timer (REC TIMER, DAILY 1, DAILY 2, or DAILY 3) you want to activate.
QP LINK
CLOCK/TIMER
Recording Timer
REC TIMER
ON (Time)
Canceled
Daily Timer 1
DAILY 1
ON (Time)
Clock setting
(see page 16)
Daily Timer 2
DAILY 2
ON (Time)
ON (Time)
DAILY 3
Daily Timer 3
2 Activate the selected Timer.
ENTER/SET
MP3 WMA MONO ST TA NEWS INFO A.STBY
1 DISC ALL A–B
GROUP RANDOM
QP Link
PRGM
PG PL USB
3D PHONIC
AHB PRO
PRGR.
REC
S.TURBO SLEEP
B.S.P. BONUS REC 1 2 3
Ex. When Daily Timer 1 (DAILY 1) is activated
3 Wait until the indication disappears.
32
advertisement