advertisement
UX-G70[UJ].book Page 3 Monday, May 8, 2006 1:35 PM
Connections
Do not connect the AC power cord until all other connections have been made.
• Connect VIDEO OUT directly to the video input of your
TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back a copyprotected disc. Connecting VIDEO OUT to an integrated
TV/VCR system may also interfere with your viewing.
Rear panel
Supplied accessories
Check to be sure that you have all the following items.
• FM antenna (x1)
• AM loop antenna (x1)
• Composite video cord (x1)
• Core filters* (x2)
• Remote control (x1)
• Batteries (x2)
• AC plug adapter (x1)
If any item is missing, consult your dealer immediately.
~
From the powered subwoofer
See page 4.
Ÿ
From AM/FM antenna
See page 4.
!
From the input of TV/monitor
See page 4.
⁄
From the digital input of digital audio component
See page 4.
Voltage selector: See page 5.
@
From the speakers
See page 5.
¤
To a wall outlet
Plug in the AC power cord only after all connections are complete.
• If the wall outlet does not match the AC plug, use the supplied AC plug adapter.
Front panel
Pull down the cover until you hear a clicking sound.
From the PC: See page 12.
From the portable audio device: See page 5.
From the video game: See page 12.
From the headphones: See page 7.
*
Attaching the core filter to the USB cable, LINE IN and LINE OUT cable to reduce interference
At the front panel
Stopper
Wind firmly the USB cable twice.
Wind firmly the LINE IN and LINE OUT cable once.
• Keep close between the plug and the core filter.
• Do not damage the cable by applying excessive force when winding.
Close the core filter until you hear a clicking sound.
3
UX-G70[UJ].book Page 4 Monday, May 8, 2006 1:35 PM
~
Powered subwoofer
From the powered subwoofer
(not supplied)
SUB -
WOOFER
OUT
The subwoofer connected can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the LFE signals in DVD multi-channel discs.
• Before plugging the unit to the main supply, make sure that the powered subwoofer is turned off.
Ÿ
AM/FM antenna
To assemble the AM loop antenna
• Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75
Ω
wire with coaxial type connector (IEC or DIN45325).
!
TV/monitor
Connect only component cord at one time.
Red
Blue
To connect AM/FM antenna
AM loop antenna
(supplied)
Green Component video cord
(not supplied)
• To select progressive scanning mode (see page 15), use
COMPONENT jacks.
S-video cord (not supplied)
Composite video cord (supplied)
• After connecting a TV, select the proper video signal mode according to the connection method. See “Changing the
Scanning Mode” on page 15.
⁄
Digital audio component
FM antenna (supplied)
Extend it so that you can obtain the best reception.
For better AM/FM reception
AM loop antenna (supplied)
Keep it connected.
Vinyl-covered wire
(not supplied)
Extend it horizontally.
Protective cap
FM outdoor antenna
(not supplied)
• Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 32). If the setting is incorrect, loud noise may be generated causing damage to the speakers.
• Digital audio signals are output from this System only when
“DVD/CD” is selected as the source.
4
UX-G70[UJ].book Page 5 Monday, May 8, 2006 1:35 PM
@
Speakers
• When connecting the speaker cords, match the polarity of the speaker terminals: red color to (+) and black color to (–).
Insert
Press and hold
Red
Release
• By using QP Link (Quick Portable Link), you can easily start playing back a portable audio device on this unit when connecting it to the LINE IN jack. See page 11 for details.
• Connect an audio component to the LINE OUT jack if the component is not equipped with a digital input terminal.
• If an external device is not equipped with a stereo mini plug audio output, use a plug adaptor to convert the stereo mini plug to the corresponding plug of the audio output.
Before plugging in the System
Set the correct voltage for your area with the voltage selector on the rear.
220V
110V
VOLTAGE
SELECTOR
127V
230V-240V
Use a screwdriver to set the voltage selector to the same voltage as where you are plugging in the unit. (See also the back cover page.)
From right speaker
CAUTION:
Black
From left speaker
Preparing the remote control
• DO NOT connect more than one speaker to each terminal.
• DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.
When connecting a portable audio device (LINE)
Portable audio device
(Digital Audio Player, etc.)
To the audio output
At the front panel
Stereo mini plug
(not supplied)
R6(SUM-3)/AA(15F)
• Dispose of batteries in the proper manner, according to federal, state, and local regulations.
DO NOT recharge, short, disassemble, heat the battery or dispose of it in a fire.
When using the remote control
Point the top of the remote control toward the remote sensor as directly as possible. If you operate it from a diagonal position, the operating range (approx. 5 m) may be shorter.
Portable audio device with the audio input
(Digital Audio Player, etc.)
To the audio input
5
advertisement