ЕЛА: 10594 2
HR
HURRY:
FE :
88*176mm
8mm
88mm
176mm
TranyaGo
Smart Watch ЕВЕ
15-MONTH
EXTENDED WARRANTY
Bee
ag Tranya E
par rics ACTIVATE WITHIN 14 DAYS
|
D | SAT tranya.com/pages/register-product
SCAN QR CODE Email: tot
FOR EXTENDED WARRANTY EI EA m
Ш Package list
ie > | y
User Manual
Smart Watch x 1 User Manual x 1
Ea Y
Charging cable x 1
Ш Replace the band
charging port
switch
SO
short band
000000000000 )
|
а
switch long band
side button
If you buy new bands and want to replace, firstly, flip the switch and
take out the wrist band, then pick up the band you like, and flip the
switch into the end of the watch until you hear a click and then
snaps into place.
Note: Pay attention to the position of the long and short band and
the display screen, do not install them upside down.
—
%
Ш Charge your watch
Connect the USB-charging cable with the watch according to the
picture.
When the device is connected to the power
supply, it will vibrate.
Ш Wearing
Wear the device with a finger's distance from
the wrist bone and adjust the tightness of the
wrist band to a comfortable position.
aL
<=
1. Long press the side button for 4-5 seconds to power on. Or charge
Ш Power on/off
it to power on.
2. Switch to the Shutdown interface, and press it to power off. Or
press the side button for 4-5 seconds in the main interface to power
off.
Ш Install the App
1. Open your APP store and search “GloryFit” to install.
2. Or scan the following QR codes to install “GloryFit”. The QR code
can be found in the Setting.
Settings
Airplane Mode
8 WLAN Not Connected
dé LLLLLLLLELE CI
Bluetooth On
№.
| Cellular
Device requirement: i0S9.0 and
above, Android 4.4 and above to
support Bluetooth 4.0.
Note: Don't pair the watch directly with
the Bluetooth in your mobile phone's
settings.
~
Le
CS
QE —ы—ы ——> o Qee — —. eo — —u— CS — CS AA AAA CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS CS Ce AS mm
Ш Device connection
1. Turn on the Bluetooth in your phone;
2. Open the “GloryFit” in your phone;
3. Click “Device”;
4. Click "Add a new device”;
5. Click “Select device”;
6. Select the product model - TranyaGo;
"searching"
Please put the device close to the phone
as much as possible
TranyaGo(ID-330C)
MAC: 78:02:b7:22:33:00
7. Click “Pair” to complete connection. Bluetooth Pairing Request
"TranyaGo(ID-330C)" would like to
pair with your iPhone.
Cancel Pair
Note: If you can't find “TranyaGo” in stepé, please check whether the
device has been selected in the Bluetooth list of your mobile phone.
If so, please click “Ignore TranyaGo” and search again.
The GloryFit would save the Bluetooth address of your smart watch
after the above steps. Once the GloryFit is running, the watch will be
connected automatically next time.
Ш Operation
1. Raise your hand or press the side button to light up the screen.
2. The screen will turn off without operations in 5 seconds by default.
You can modify this default value in the GloryFit.
3. The heart rate monitoring function is on by default. You can turn it
off in the GloryFit.
4. Press the side button at any time to return back.
M Data synchronism
The watch can store 7 days of off-line data, and you can synchronize
the data on the App homepage manually. The more data, the longer
the synchronization time is, and the longest time is about 2 minutes.
>
~
App functions and settings
Ш Personal information and exercise goals
1. Open the App GloryFit to set your
personal information. Y
GloryFit
2. Setting your avatar, name, gender,
. . . Emall
age, height and weight, which can help ped Ems
to increase the accuracy of the [Code
monitoring data. ( = )
3. Set your daily exercise goals.
Ш App setting
Reminding GloryFit setting Display Operating Interface
When the phone Th b You can press and
Call © € name or numbers | hold the “Reject”
of the incoming call. for 2 seconds to
hang up the call.
When the phone ...
Display the content up
to 160 characters for Click to view
Message Phone has a ... IOS or 80 characters the message. /
for Android per
message.
© YouTube
Display the content up
A to 160 characters for
PP zt Snapchat 105 or 80 characters
for Android per
о Facebook
Click to view
the message.
message.
—
%
TranyaGo tH 3
Reminding GloryFit setting Interface Reminding GloryFit setting
How long is ...
h d, the screen will
. automatically light up
The start time Light Up
Sedentary
reminder The end time
12:00 noon to ...
Shake To Take Picture
M @ Find Device
. оге
Alarm 14:47 Settings Display Timeout
clock 16:35 © 24-Hour Time
x Device Language
Do Not Disturb: If the Do Not Disturb mode is on, the screen will not light
up when you raise your hand, as well as brakes vibrations and message
push will be off. Out of the time range, you can also set Vibration mode
off or Message off.
Basic
Ш Basic navigation
The home screen is the clock.
1. Swipe down to see the quick settings, such as Do Not Disturb,
Brightness, Find the Phone, Setting.
2. Swipe up to see the notifications.
3. Swipe right to see the Apps on your watch.
4. Swipe left to see the shortcut interfaces, such as Status, Heart rate,
Sleep, Weather.
5. Press the side button to return.
—_
~
IE ___ _ eo. _.o»-€.—o» Co N FE A AAA AAA AAA AAA AAA AAA AAA AAA AAA AAA AAA AAA AAA AAA AAA AAA AAA CS AAA AAA AAA AAA AAA AAA AAA CS AAA AAA AAA AAA AAA AAA ASA
%
Basketball Football Dance
Ш Main page function
This icon displays when the watch
and the phone are disconnected,
and disappears when they are
connected successfully.
Time 22:00° di
Date -08/27 Mon — 26°с/2у°с
Week Weather and temperature
There are a total of 24 pillars, from
H 0 o'clock to 24 o'clock, each
eart rate
representing an hourly average
heart rate.
100% 2245
у F
Battery Steps
Ш Switch main interface
22:00° ds
08/27 Mon —26°с/27°с
1. Long press the main interface for 4-5 seconds to switch.
2. Or [Setting]-[Dial] to switch.
Note: You can also choose more interfaces in the Dash Board of
GloryFit.
Ш Sports interface
Switch to the Sports interface, press the screen to enter the specific
Sports interface. Press the side button to pause, you can choose
whether to continue or exit.
о © ©
we UW Y
Running Cycling Swimming Badminton Ping Pong Tennis
Ш Status interface
Switch to the Status interface to check the steps, distances and
calories. The distances and calories are calculated based on the
current walking steps, the height and weight set in the App
individually.
Ш Heart Rate interface
Switch to the Heart Rate interface, click the screen to view the heart
rate data.
Note:
1. The heart rate monitoring is enabled by default. If you don't want
this function, you can turn it off in the "GloryFit” App.
2. If the heart rate monitoring function is on, the green light on the
back of the watch will keep flashing.
3. The sensor should be close to the skin to avoid the effect from
external light on the accuracy.
4. When you find that the heart rate data is inaccurate, you can restart
the watch to correct it.
Ш Sleep interface
Switch to the Sleep interface and check the sleep status. When you
fall asleep, the watch will determine to enter the sleep monitoring
mode automatically to calculate the length of your deep sleep/light
sleep/awake time all night, and evaluate your sleep quality. You can
only view sleep data on the App.
Note: The sleep date can only be recorded when you sleep with
the watch.
Ш Weather interface
Switch to the Weather interface, you can view the weather and
temperature.
Ш Music interface
You can play, pause or switch the songs playing in your cell phone.
Ш Message interface
In the Message interface, click the main screen to view the message,
slide the screen to turn the pages. Press the side button to exit.
Ш More
Stopwatch: Switch to the Stopwatch interface, click to enter the timing
interface.
Countdown: Switch to the Countdown interface, and click to choose
the time you want to count down. You can customize the time at the
bottom of the page. When the time is up, the watch will vibrate.
Flashlight: Switch to the Flashlight interface, and press the screen to
turn on the flashlight.
Find the Phone: Switch to the Find the Phone interface and touch the
icon, then the phone would ring.
Ш Setting
Dial (Main interface]: You can also press the main interface for 4-5
seconds to switch.
so Shut Down
м
Reset Brightness Do Not About Shut down
Disturb
Y
Y Weaken
UPDATED
—
QR code: Scan the QR codes to install the APP “GloryFit”.
Precautions
1. Please avoid strong impact, extreme heat and exposure to the watch.
2. Please do not disassemble, repair or transform the device on its own.
3. The use of the environment is 0 degrees ~45 degrees, and it is
forbidden to throw it into the fire so as not to cause an explosion.
4. Please wipe off the water with a soft cloth and then the watch can be
used for the charging operation, otherwise it will cause corrosion of
charging contact point and charging incident may occur.
5. Do not touch the chemical substances such as gasoline, clean solvent,
propanol, alcohol or insect repellent.
.
+.
FAILED UPDATING...
Upgrade
—
%
6. Please do not use this product in high pressure and high magnetic
environment.
7. If you have sensitive skin or tighten the wristband, you may feel
discomfortable.
8. Please dry the sweat drips on the wrist in time. The strap has long
contact with soap, sweat, allergies or pollution ingredients, which may
cause skin allergy itching.
9. If it is often used, it is recommended to clean the wristband every
week. Wipe with wet cloth and remove oil or dust with mild soap. It is not
appropriate to wear a hot bath with a wristband. After swimming, please
wipe the wristband in time so as to keep dry.
FAQ
Q: Can't find the smart watch when trying to
select device on the GloryFit App setting.
A: 1. Make sure the smart watch is on and close to
your phone;
2. Make sure the smart watch - “TranyaGo” is
NOT on the Bluetooth list of your phones;
3. Make sure the smart watch is not connected to
any other phones.
Search again and you would find “TranyaGo” in
your GloryFit App.
Q: Is the watch waterproof?
A: It supports IP68 waterproof and dust-proof level (IP68 standard is
35 degrees below water, 1 meter below 30 minutes).
Usually, you can wash your hands, take a cold shower, or wash car
with the smart watch.
Note: But be sure not to enter the steam room with your watch.
Such as sauna, hot spring, hot bath, etc.
Q: Why is the data of heart rate
monitoring inaccurate?
A: To calculate your heart rate, Heart Rate Monitoring utilizes
the LED lights to determine how much green and red light is
being detected from the skin of your wrist. If you don't keep
the watch close to your skin, there will be ambient light
reaching into the sensor, which will affect measurement
accuracy.
ht
= nn A A ee ES Sem SS EE EEE EEE EEE EEE Sehen SS SSE EEE ES SES Sem ESE EEE Eee SES en
%
Q: Why can’t | receive the message notification?
A: Android Phone:
Step 1: Be sure the watch is connected to the phone;
Step 2: Be sure the “GloryFit” App is running in your cell phones,
and keep it running in the background;
Step 3: Be sure the watch is not on “Do Not Disturb” mode;
Step 4: Be sure the related reminders in the GloryFit App are on;
Note: Currently, the GloryFit App may be killed in the background
for most Android Phones in every 10-15 minutes.
Regarding to a specific model of your phone, for example, pixel 5,
you can google “how to keep APPs running in the background
pixel 5”.
iPhone:
Step 1: Restart the phone and reconnect the smart watch;
Step 2: There will be a popping up “Bluetooth pairing request”
and clicking “Pair”;
Step 3: Be sure the “GloryFit” App is running in your cell phones,
and keep it running in the background;
Step 4: Be sure the watch is not on “Do Not Disturb” mode;
Step 5: Be sure the related reminders in the GloryFit App are on.
Basic parameter
1.69 Inch Full Touch
Type Smart Watch Battery Type Li-Polymer
Display Size 1.69Inch Battery Model 372026
Weight 54.59 Battery Capacity 200mAh
Length 25.5cm Battery Voltage DC 5.0V
Waterproof Level IP68 Battery Power 0.76Wh
Material TPU, PC+ABS Package Device, Manual,
Charging cable
—_
x. . ___ _ A o o. CS о ны
%
For more information, please visit:
www.tranya.com
For any assitance, email us:
[email protected]
Made in China
FE CE RoHs & X
=
">
