Pentax K200D Operating Manual
إعلان
إعلان
PENTAX Corporation
PENTAX Europe GmbH
(European Headquarters)
PENTAX U.K. Limited
PENTAX France S.A.S.
PENTAX Italia S.r.l.
2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.co.jp/)
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
112 Quai de Bezons, B.P. 204
95106 Argenteuil Cedex, FRANCE
(http://www.pentax.fr)
Via Dione Cassio 15, 20138 Milano, ITALY
(http://www.pentaxitalia.it)
PENTAX (Schweiz) AG Widenholzstrasse 1, 8304 Wallisellen, Postfach 367,
8305 Dietlikon, SWITZERLAND
(http://www.pentax.ch)
PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A.
(PENTAX Service Department)
12000 Zuni Street, Suite 100B Westminster, Colorado
80234, U.S.A.
(http://www.pentaximaging.com)
PENTAX Canada Inc.
PENTAX Trading
(SHANGHAI) Limited
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
23D, Jun Yao International Plaza, 789 Zhaojiabang Road,
Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn) http://www.pentax.co.jp/english
• Specifications and external dimensions are subject to change without notice.
53311 Copyright © PENTAX Corporation 2008
02-200802 Printed in Philippines
SLR Digital Camera
Operating Manual
For optimum camera performance, please read the Operating Manual before using the camera.
Thank you for purchasing this PENTAX x Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera capabilities.
Lenses you can use
In general, lenses that can be used with this camera are DA, D FA and FA J lenses and lenses that have an Aperture s (Auto) position.
To use any other lens or accessory, see p.45 and p.230.
Regarding copyrights
Images taken using the x that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright
Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
PENTAX and smc PENTAX are trademarks of PENTAX Corporation.
SD logo and SDHC logo are trademarks.
This product includes DNG technology under license by Adobe Systems Incorporated.
The DNG logo is either a registered trademark or trademark of Adobe Systems
Incorporated in the United States and/or other countries.
All other brands or product names are trademarks or registered trademarks of their respective companies.
To users of this camera
• There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields.
• The liquid crystal panel used in the monitor is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.
This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not
PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation.
The PRINT Image Matching logo is a trademark of Seiko Epson Corporation.
Regarding PictBridge
PictBridge allows the user to connect the printer and digital camera directly, using the unified standard for the direct printout of images. You can print images directly from the camera through a few simple operations.
• There is a possibility that the illustrations and the display screen of the monitor in this manual are different from the actual product.
FOR USING YOUR CAMERA SAFELY
We have paid close attention to the safety of this product. When using this product, we request your special attention regarding items marked with the following symbols.
Warning
Caution
This symbol indicates that violating this item could cause serious personal injuries.
This symbol indicates that violating this item could cause minor or medium personal injuries, or material losses.
1
ABOUT THE CAMERA
Warning
• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.
• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is the risk of electric shock.
• To avoid the risk of it being swallowed by mistake, keep the SD Memory
Card out of the reach of small children. Seek medical attention immediately if a memory card is accidentally swallowed.
• Wrapping the strap around your neck is dangerous. Take care that small children do not hang the strap over their necks.
• Do not look directly at the sun through the camera with a telephoto lens attached, as viewing the sun may damage your eyes. Viewing the sun directly with a telephoto lens may lead to a loss of eyesight.
• Be sure to store the batteries out of the reach of children. Placing in mouth may cause an electrical shock.
• Always use the AC adapter exclusively developed for this product, with the specified power and voltage. Using an AC adapter not exclusive to this product, or using the exclusive AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the batteries or the AC adapter, and contact your nearest PENTAX Service Center. Continued use could cause a fire or electric shock.
• During thunderstorms, unplug and discontinue use of the AC adapter.
Continued use could cause equipment failure, a fire, or electric shock.
2
Caution
• Do not short the batteries or dispose of the batteries in fire. Do not disassemble the batteries. The batteries could explode or catch fire.
• Of the batteries that can be used in this camera (AA Ni-MH batteries, AA lithium batteries and AA alkaline batteries), only the Ni-MH batteries can be recharged. Recharging other batteries can cause a fire or explosion.
• Remove the batteries from the camera immediately if they become hot or begin to smoke. Be careful not to burn yourself during removal.
• Some portions of the camera heat up during use. There is the risk of low temperature burns when holding such portions for long periods.
• Do not place your finger over or cover the flash with clothing when discharging the flash. Fingers or clothing may be burned.
• To reduce the risk of hazards, use only CSA/UL Certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a molded-on male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.
PRECAUTIONS FOR BATTERY USAGE
• Only use the specified batteries with this camera. Use of other batteries can cause a fire or explosion.
• Replace all the batteries at the same time. Do not mix battery brands, type or an old battery with a new one. It may cause explosion or a fire.
• The batteries should be inserted correctly with regard to polarity (+ and –) marked on the batteries and the camera. Not inserting batteries correctly may cause explosion or a fire.
• Do not disassemble the batteries. Of the batteries that can be used in this camera, only the Ni-MH batteries can be recharged. Disassembling the batteries or attempting to charge non-rechargeable batteries could result in explosion or leakage.
Care to be Taken During Handling
• When traveling, take the Worldwide Service Network that is included in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or during traveling). Pictures cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (SD Memory Card), etc.
• Do not clean the product with organic solvents such as thinner or alcohol benzene.
• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.
• Do not store the camera with preservatives and chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera.
Remove from the case and store in a dry and well-ventilated location.
• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.
• The temperature range for camera use is 0°C to 40°C (32°F to 104°F).
• The LCD display may appear black under high temperatures, but will return to normal as temperatures normalize.
• The LCD display may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a fault.
• Periodic inspections are recommended every one to two years to maintain high performance.
• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, removing the camera after temperature of the camera and surroundings are equalized.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts.
These could cause a camera breakdown. Wipe dry any rain or water drops on the camera.
• Refer to “Precautions When Using the SD Memory Card” (p.42) regarding
the SD Memory Card.
• Use a lens brush to remove dust accumulated on the lens or viewfinder.
Never use a spray blower for cleaning as it may damage the lens.
• Please contact PENTAX Service Center for professional cleaning of the
CCD. (This will involve a fee.)
• Please do not press forcefully on the monitor. This could cause breakage or malfunction.
• Depending on a user's physical condition, some users may experience itching, break out in a rash or suffer from eczema. If an abnormality occurs, immediately discontinue using the camera and seek medical attention.
3
4
Regarding Product Registration
In order to better serve you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or on the PENTAX website. Thank you for your cooperation.
Refer to the PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3 Operating
Manual (Windows users: p.9, Mac OS users: p.10) for more information.
Contents
FOR USING YOUR CAMERA SAFELY ...............................................1
ABOUT THE CAMERA.........................................................................1
PRECAUTIONS FOR BATTERY USAGE ............................................2
Care to be Taken During Handling .......................................................2
Composition of the Operating Manual ................................................11
Before Using Your Camera 13
x Camera Characteristics............................................. 14
Checking the Contents of the Package...................................... 16
Names and Functions of Working Parts .................................... 17
Capture Mode .....................................................................................18
Playback Mode ...................................................................................20
Display Indicators ........................................................................ 22
How to Operate the Menu............................................................ 30
Using the Mode Dial..................................................................... 32
Getting Started 35
Attaching the Strap ...................................................................... 36
Inserting the Batteries ................................................................. 37
Battery Level Indicator ........................................................................38
Approximate Image Storage Capacity and Playback Time
Using the AC Adapter (Optional) ........................................................40
Inserting/Removing the SD Memory Card ................................. 41
Recorded Pixels and Quality Level.....................................................43
Attaching the Lens....................................................................... 45
Adjusting the Viewfinder Diopter ............................................... 47
Turning the Camera On and Off.................................................. 48
Initial Settings .............................................................................. 49
Setting the Display Language.............................................................49
Setting the Date and Time ..................................................................52
5
6
Basic Operations 55
Basic Shooting Operation ........................................................... 56
Holding the Camera............................................................................56
Letting the Camera Choose the Optimal Settings ..............................57
Using a Zoom Lens...................................................................... 61
Using the Built-in Flash ............................................................... 62
Taking Pictures Using the Shake Reduction Function............. 67
Turning On the Shake Reduction Function.........................................68
Setting the Shake Reduction Function ...............................................69
Playing Back Still Pictures.......................................................... 70
Playing Back Images ..........................................................................70
Deleting Images ........................................................................... 72
Deleting a Single Image......................................................................72
Shooting Functions 73
How to Operate the Shooting Menus ......................................... 74
[A Rec. Mode] Menu Setting Items ...................................................74
[A Custom Setting] Menu Setting Items.............................................75
Shooting Fn Menu Setting Items ........................................................77
Selecting the Appropriate Capture Mode for Scenes ............... 78
Selecting the Shooting Scene.............................................................79
Setting the Exposure ................................................................... 81
Effect of Aperture and Shutter Speed.................................................81
Setting the Sensitivity .........................................................................83
Changing the Exposure Mode ............................................................85
Selecting the Metering Method ...........................................................98
Adjusting the Exposure.....................................................................100
Focusing ..................................................................................... 102
Using the Autofocus..........................................................................102
Setting the AF Mode .........................................................................104
Selecting the Focusing Area (AF Point)............................................105
Fixing the Focus (Focus Lock)..........................................................107
Adjusting the Focus Manually (Manual Focus).................................109
Shooting in Catch-in Focus Mode.....................................................111
Checking the Composition, Exposure and Focus Before
Shooting ..................................................................................... 112
Selecting the Preview Method ..........................................................112
Displaying the Preview .....................................................................113
Continuous Shooting................................................................. 115
Self-Timer Shooting ................................................................... 117
Remote Control Shooting (Remote Control F:
Sold Separately) ......................................................................... 120
Using Mirror Up Function to Prevent Camera Shake ............. 123
Changing the Shooting Conditions Automatically when
Shooting (Auto Bracket)............................................................ 124
Using the Flash 127
7
Compensating Flash Output ..................................................... 128
Allowing Shooting while Charging the Flash .......................... 129
Flash Characteristics in Each Exposure Mode ....................... 130
Distance and Aperture when Using the Built-in Flash ........... 132
Using an External Flash (Optional) .......................................... 134
Shooting Settings 143
Setting the Image Processing Method in Capture Mode
(Custom Image) .......................................................................... 144
Setting the File Format .............................................................. 146
Setting the JPEG Recorded Pixels ...................................................146
Setting the JPEG Quality Level ........................................................147
Setting the File Format .....................................................................148
Setting the RAW Button Function .....................................................149
Setting the White Balance ................................................................150
Setting the Color Space....................................................................155
8
Playback Functions 157
How to Operate the Menus During Playback........................... 158
[Q Playback] Menu Setting Items ...................................................158
[A Custom Setting] Menu Setting Items...........................................158
Playback Fn Menu Setting Items ......................................................159
Rotating Images ......................................................................... 160
Enlarging Playback Images ...................................................... 161
Displaying Multiple Images....................................................... 163
Displaying a Folder.................................................................... 165
Comparing Images..................................................................... 166
Slideshow ................................................................................... 167
Setting the Slideshow Display Interval..............................................169
Changing Playback Display Method ........................................ 170
Deleting Multiple Images ........................................................... 173
Deleting All Images...........................................................................173
Deleting Selected Images (from Multi-image Display)......................174
Deleting a Folder ..............................................................................176
Protecting Images from Deletion (Protect) .............................. 177
Connecting the Camera to AV Equipment............................... 179
Processing Images 181
Processing Images with Digital Filters .................................... 182
Editing RAW Images .................................................................. 185
Editing a RAW Image .......................................................................185
Specifying the Parameters................................................................186
Printing from the Camera 189
Setting the Printing Service (DPOF)......................................... 190
Printing Single Images......................................................................190
Settings for All Images......................................................................191
Printing Using PictBridge.......................................................... 193
Setting Transfer Mode ......................................................................194
Connecting the Camera to the Printer ..............................................195
Printing Single Images......................................................................196
Printing All Images............................................................................198
Printing Images Using the DPOF Settings........................................199
Disconnecting the USB Cable ..........................................................199
Camera Settings 201
How to Operate the [R Set-up] Menu ...................................... 202
[R Set-up] Menu Setting Items.........................................................202
Formatting the SD Memory Card .............................................. 203
Setting the Beep Setting, Date and Time, and Display
Language .................................................................................... 204
Turning the Beep On and Off............................................................204
Changing the Date and Time and the Display Style .........................205
Setting the World Time .....................................................................206
Setting the Display Language...........................................................209
Adjusting the Monitor and the Menu Display .......................... 210
Setting the Text Size.........................................................................210
Setting the Guide Display Time ........................................................210
Adjusting the Brightness of the Monitor ............................................211
Setting the Display for Instant Review and Digital Preview ..............211
Setting the Image Folder Naming Convention ........................ 213
Selecting the Folder Name ...............................................................213
Selecting the File Number Setting ....................................................213
Selecting the Video Output Format and Power Settings........ 214
Selecting the Video Output Format...................................................214
Setting Auto Power Off .....................................................................214
Selecting a Battery............................................................................215
Using Pixel Mapping .................................................................. 216
Selecting Capture Mode Settings to Save in the Camera ...... 217
Resetting to Default Settings 219
9
Set-up Menu ............................................................................... 220
Resetting the Custom Function Menu ..................................... 221
10
Appendix 223
Default Settings.......................................................................... 224
Functions Available with Various Lens Combinations .......... 228
Notes on [23. Using Aperture Ring] ......................................... 230
Cleaning the CCD....................................................................... 231
Removing Dust by Shaking the CCD................................................231
Detecting Dust on the CCD (Dust Alert) ...........................................231
Removing Dust with a Blower...........................................................233
Optional Accessories ................................................................ 235
Error Messages .......................................................................... 240
Troubleshooting......................................................................... 243
Main Specifications ................................................................... 246
Glossary...................................................................................... 250
WARRANTY POLICY.................................................................. 260
11
Composition of the Operating Manual
This Operating Manual contains the following chapters.
Explains camera characteristics, accessories and the names and functions of various parts.
Explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions.
Explains the procedures for taking and playing back still pictures.
Explains the shooting-related functions.
Explains how to use the built-in flash and the external flash.
Explains the procedures for configuring image processing and setting the save format.
Explains the procedures for playing back, deleting, and protecting still pictures.
Explains the procedures for using image filters and processing pictures taken in RAW format.
Explains the procedures for setting the print settings and printing still pictures while directly connected to a printer.
Explains the procedures for changing the camera settings, such as the monitor settings and the image file naming convention.
11 Resetting to Default Settings
Explains the procedure for resetting all settings to their default settings.
Explains troubleshooting, introduces optional accessories and provides various resources.
1
2
3
4
5
6
7
8
9
10
11
12
12
The symbols used in this Operating Manual are explained below.
1 Shows reference page number explaining a related operation.
Shows useful information.
Shows precautions to take when operating the camera.
1
Before Using Your
Camera
Check the package contents and names and functions of working parts before use.
x
Camera Characteristics .....................14
Checking the Contents of the Package ..............16
Names and Functions of Working Parts ............17
Display Indicators ................................................22
How to Operate the Menu ....................................30
Using the Mode Dial .............................................32
When using menus and Fn menu, items which cannot be changed due to camera settings appear gray and cannot be selected.
14 x
Camera Characteristics
1
• Features a 23.5×15.7 mm CCD with approximately 10.2 million effective pixels for high precision and a wide dynamic range.
• Features Shake Reduction (SR), an image sensor shifting shake reduction system. This enables you to capture sharp pictures with minimal camera shake regardless of the lens type.
• Features an AF sensor with 11 focusing points. The central 9 are wide cross area sensors.
• Features a viewfinder similar to that of a conventional 35 mm camera, with a magnification of approximately 0.85 and field of view of approximately 96%, for easier manual focusing. Also features a superimpose function in which the AF points on the viewfinder illuminate red.
• Features a large 2.7-inch monitor with approximately 230,000 dots, a wide viewing angle and brightness adjusting function for high-precision viewing performance.
• Uses AA lithium batteries, rechargeable AA Ni-MH batteries or AA alkaline batteries.
• A user-friendly design has been implemented in various parts of the camera. The large text, high-contrast monitor and easy-to-use menus make the camera easier to operate.
• Dials, buttons, body joints, and retractable parts of the camera are splash and dust resistant.
• The CCD features a special SP coating against dust deposit. The Dust
Removal function also shakes the CCD for removing collected dust.
• Supports the optional Battery Grip D-BG3 with the vertical shutter release button. If batteries are inserted in both the camera and grip, the battery set with more power is prioritized. This enables you to get the best camera performance for an extended period. A menu item also allows you to prioritize a battery set and use its full power before switching to the other.
• Features Custom Image which allows you to adjust settings while previewing the edited image, enabling a wider range of expression.
• Records in the versatile JPEG format or the high quality and fully editable RAW format. You can also select JPEG+RAW and record in both formats. Pictures taken in RAW format can be easily processed internally by the camera.
• Features Hyper-program and Hyper-manual modes that let you take pictures flexibly with the intended exposure. Also features Sensitivity
Priority mode K that automatically adjusts aperture and shutter speed according to the set sensitivity.
15
The captured area (view angle) will differ between the x and 35 mm
SLR cameras even if the same lens is used because the format size for 35 mm film and CCD are different.
Sizes for 35 mm film and CCD
35 mm film x CCD
: 36×24 mm
: 23.5×15.7 mm
Angles of view being equal, the focal length of a lens used with a 35 mm camera must be approximately 1.5 times longer than that of x. To obtain an angle of view framing the same area, divide the focal length of the 35 mm lens by 1.5.
Example) To capture the same image as a 150 mm lens attached to a 35 mm camera
150÷1.5=100
Use a 100 mm lens with the x.
Inversely, multiply the focal length of the lens used with x by 1.5 to determine the focal length for 35 mm cameras.
Example) If 300 mm lens is used with x
300×1.5=450
Focal length is equivalent to a 450 mm lens on a 35 mm camera.
1
Shake Reduction (SR)
Shake Reduction (SR) on the x features a PENTAX original system which uses magnetic force to move the image sensor at high speeds, compensating camera shake.
The camera may generate some operating noise when it is shaken, such as when changing the composition of a picture. It is not a malfunction.
16
Checking the Contents of the
Package
1
The following accessories are packaged with your camera.
Check that all accessories are included.
Hot shoe cover F
K
(Installed on camera)
Eyecup F
P
(Installed on camera)
ME Viewfinder cap
Body mount cover
(Installed on camera)
USB cable
I-USB17
Video cable
I-VC28
Software (CD-ROM)
S-SW74
Strap
O-ST53
Four AA lithium batteries
(2 packs)
Operating Manual
(this manual)
Quick Guide PENTAX PHOTO Browser 3/
PENTAX PHOTO Laboratory 3
Operating Manual
Names and Functions of Working
Parts
Camera
Hot shoe
Self-Timer lamp/
Remote control receiver
Card cover
Lens mount index
(red dot)
Lens unlock button
Diopter adjustment lever
Built-in Flash
Cable switch terminal
USB/Video terminal
DC input terminal
Terminal cover
Mirror
Strap lug
AF coupler
Lens information contacts
LCD panel
Viewfinder
Card access lamp
Monitor
17
1
Tripod socket
Battery grip connector terminal
Battery cover unlock lever
Battery cover
* In the illustrations above, the back and bottom sides of the camera are shown with the Eyecup F
P
removed.
18
Capture Mode
1
Functions of buttons, dials and levers used during shooting are noted.
The factory default settings are explained here. Depending on the button or
dial, these settings can be changed in the [A Custom Settings] menu (p.75).
5 1
2
3
6
7
4
8
9
0 a b c d e f g h
1 Green button
Sets the Exposure mode to
2 Shutter release button
Press to capture images.
3 Main switch
Move to turn the power on/off
4 Lens unlock button
5 mc button
Sets the EV compensation and
6 | button
Changes the file format temporarily. Press to switch to
RAW+ (saves both JPEG and
7 Focus mode lever
Switches between autofocus
8 Mode dial
Changes the Capture mode.
9 K button
Press to pop up the built-in
0 3 button
Displays the [A Rec. Mode]
four-way controller (5) to display [Q Playback] menu
a M button
Press to show shooting information on the monitor.
19 b Q button
Switches to the Playback
c e-dial
Sets the shutter speed, aperture, sensitivity and EV compensation values.
d L button
Locks the exposure before
e Four-way controller
(2345)
Use this to move the cursor or change items in menus and
Fn menu.
f 4 button
Saves the setting you selected in the menu.
Press when menu is not displayed to display the currently selected sensitivity in the LCD panel and viewfinder.
g Shake Reduction switch
Turns the Shake Reduction
h { button
Press to display the Fn menu.
1
20
Playback Mode
1
Functions of buttons, dials and levers used during playback are noted.
3
1
2
4
5
6
7
8
9
0 a b
1 Shutter release button
Press halfway to switch to
Capture mode.
2 Main switch
Move to turn the camera on
position to switch to Capture mode and preview.
3 mc button
Press in Enlarged view to increase the magnification.
4 3 button
Press to display the
Next, press the four-way controller (45) to display
[A Custom Setting] menu
5 i button
Press to delete images. (p.72)
6 M button
Press to show shooting information on the monitor.
21
7 Q button
Press to switch to Capture mode.
8 Z button
Press to protect images from being accidentally erased.
Press in enlarged view to decrease the magnification.
9 e-dial
Use it to enlarge an image
images at the same time
0 Four-way controller
(2345)
Use it to move the cursor or change items in menus, Fn menu and playback screen.
a 4 button
Saves the setting you selected in the menu or playback screen.
b { button
Press to display the Fn menu.
1
22
Display Indicators
1
Monitor
The following indicators appear on the monitor depending on the status of the camera.
Monitor
At Start-up or when Operating the Mode Dial
Guides appear on the monitor for 3 seconds (default setting) when the camera is switched on or the mode dial is turned.
Select Off for [Guide display] in [R Set-up] menu to not show indicators.
1 2 3 4 5 6 7
8
9
RAW
OK
/ / 2008 10 : 39AM
1 0
1 3 1 2 11
1 Flash mode
2
3
4
5
6
7
8
9
Capture mode, Scene mode (p.78)
10 Button/dial guide
* Indicators 3, 5, 6 and 7 only appear when a setting other than the default setting is selected. 8 only appears when Shake Reduction is Off. 13 only appears when World Time is On.
23
Capture Mode
Press the M button in Capture mode to display the capture function settings on the monitor for 30 seconds.
Press the four-way controller (23) while displayed to switch to explanation of set Shooting mode.
Detailed information display
1
F 2 . 8
2 0 0 - 1 6 0 0
G2 AdobeRGB
/
10
/ 2008 mm
1
10
11
2
16
14
17
20 21
29
3 4 5
6 7
13 12
18
22
15
19
23
30
8
9
24
25
26
27
28
31
1
2
3
4
5
6
7
8
9
13 Flash exposure compensation
15 ISO correction in AUTO (p.83)
17 GM compensation (Adjust White
18 BA compensation (Adjust White
21 JPEG recorded pixels (p.146)
25 Saturation/Filter Effect (p.144)
28 Sharpness/Fine Sharpness
* In order to explain the detailed information display, a screenshot with all the information displayed is shown here. Depending on the Capture mode, some of the information may not be displayed.
24
Explanation of Shooting Mode
1
1
Fn
RAW
OK
1
2 Capture mode explanation
3 Button/dial guide
2
3
25
Playback Mode
Every time you press the M button during playback, the camera switches screen displays in the following order: Standard display, Histogram display,
Detailed information display and No information display (image only).
You can change the information initially displayed by pressing the Q button.
1
Detailed information display
/
10
/ 2008
1 3 14
2
4
11
7
12
23
27 28 29
31
8
5 6
9 10
13
24 25 26
30
15 16
17
18
19
20
21
22
1 Rotation information
2 Captured image
3 Protect
4 Capture mode
5 AE metering
6 Flash mode
7 Shutter speed
8 Shake Reduction
9 Drive mode
10 Exposure bracket
11 Aperture
12 EV compensation
13 Flash exposure compensation
14 Folder No./File No.
15 Focus mode
16 AF point position
17 Lens focal length
18 Image Tone
19 Saturation/Filter Effect
20 Hue/Toning
21 Contrast
22 Sharpness/Fine Sharpness
23 Sensitivity
24 White balance
25 GM compensation (Adjust White
Balance)
26 BA compensation (Adjust White
Balance)
27 File format
28 JPEG recorded pixels
29 JPEG quality
30 Color Space
31 Shooting date/time
* Indicators 6 and 13 only appear for images in which the flash was discharged.
26
Histogram Display
The x features two histogram displays. The “Brightness histogram” shows the distribution of brightness and the “RGB histogram” shows the distribution of color intensity. Press the four-way controller
(23) to switch between “Brightness histogram” and “RGB histogram”.
1
1 2 1 4 3 2
3
4
23
7
8
9
6
23
6
5
Brightness histogram
5
RGB histogram
1 File Format
2
3
4
5
Histogram (Brightness) (p.170)
6 Switch Brightness histogram/
RGB histogram
7 Histogram (R)
8 Histogram (G)
9 Histogram (B)
* Indicator 3 only appears for images with Protect setting and indicator 4 only appears for images with DPOF settings.
Areas where blooming or dark portions blink if [Bright/Dark area] warning is set
to O (On) in [Playback display] in the [Q Playback] menu. (p.171)
27
Viewfinder
The following information appears in the viewfinder.
2 3
4 5 6
1 1
7 8 9 10 11 12
13
1
2
3
4
Lit: when flash is available.
Blinks: when flash is recommended but not set.
5
Appears when AF Mode is set to k (Continuous mode) or \.
6
Picture/Scene mode icon (p.78)
Icon for Picture mode or Scene mode in use appears.
\ (Moving Object), q (Macro), = (Portrait), U (Normal mode in I),
.
(Night Scene Portrait), s (Landscape), H (Scene)
7
Shutter speed when capturing or adjusting.
Underlined when shutter speed can be adjusted with the e-dial.
8
Aperture value when capturing or adjusting.
Underlined when aperture value can be adjusted with the e-dial.
1
28
1
9
Lit: when image is focused.
Blinks: when the subject is not in focus.
Appears during AE lock.
11 Number of recordable images/EV compensation/Sensitivity
Displays the number of recordable images with current quality and recorded pixel setting.
The difference from the appropriate exposure value appears if exposure
m
Underlined when EV compensation can be adjusted with the e-dial while the mc button is pressed.
o : Sensitivity
Underlined when sensitivity can be adjusted with the e-dial
Appears when the Shake Reduction function is activated.
Displays the image save format in RAW/RAW+ format.
Not displayed in JPEG format.
• The AF point in use for autofocus is superimposed in red when the shutter
release button is pressed halfway. (p.105)
• When [12. OK button when shooting] in the [A Custom Setting] menu is set to [Sensitivity/No. of Shots] and Sensitivity Priority Mode is set, the number of recordable images is displayed in 11 while the 4 button is pressed.
When set to another mode, ISO sensitivity is displayed in 11 while the 4
• [999] is the maximum number of recordable images that can be displayed in the viewfinder. Even if the number of recordable images is 1000 or more,
[999] is displayed.
LCD Panel
The following information appears in the LCD panel on top of the camera.
29
1
1 2 3
4
10
5
6
7 8 9
1
2
3
(Not displayed when set to Auto)
O : White balance correction
4 Battery level
5
b : Built-in flash is ready
(when blinking, flash should be used) a : Flash off
E : Auto discharge
> : Red-eye reduction flash on
6
9 : Single frame shooting j : Continuous shooting g : Self-timer shooting
V : Auto bracket shooting
W : Remote control shooting
7
No indicator: Auto
V
M
: Select
: Center
8
No indicator: Multi-segment metering
M : Center-weighted metering
: Spot metering N
9 Recordable image no. (up to
[999]) / EV compensation (p.100)/
Sensitivity / PC (mass storage),
Pb (PictBridge)
1 : RAW capture
1 P : RAW+JPEG capture
No indicator : JPEG
30
How to Operate the Menu
1
This section explains operation methods for [A Rec. Mode] menu,
[Q Playback] menu, [R Set-up] menu and [A Custom Setting] menu.
Displaying the Menu screen
1
Press the 3 button in
Capture mode.
The [A Rec. Mode] menu appears on the monitor.
R e c . M o d e
A F M o d e
A E M e t e r i n g
S e l e c t A F p o i n t
F i l e F o r m a t
J P E G R e c . P i x e l s
J P E G Q u a l i t y
MENU E x i t
AF.S
JPEG
10
2
Press the four-way controller
(5).
The [Q Playback] menu, [R Set-up] menu and [A Custom Setting] menu appear in order each time the four-way controller is pressed. (The screen for the [R Set-up] menu is shown on the right.)
You can use the e-dial to switch the menus.
S e t - u p
F o r m a t
B e e p
D a t e A d j u s t
Wo r l d Ti m e
L a n g u a g e
Te x t S i z e
MENU E x i t
E n g l i s h
S t d .
Selecting and Setting a Menu Item
Procedure to set the [JPEG Quality] on the [A Rec. Mode] menu is explained as an example.
3
Use the four-way controller
(23) to choose an item.
R e c . M o d e
A F M o d e
A E M e t e r i n g
S e l e c t A F p o i n t
F i l e F o r m a t
J P E G R e c . P i x e l s
J P E G Q u a l i t y
MENU E x i t
AF.S
JPEG
10
4
Press the four-way controller (5).
Quality levels available when recording in
JPEG format are displayed.
Press the four-way controller (5) to move to the pop-up menu if there is one.
AF.S
128
A F M o d e
A E M e t e r i n g
S e l e c t A F p o i n t
F i l e F o r m a t
J P E G R e c . P i x e l s
J P E G Q u a l i t y
MENU C a n c e l OK O K
5
Use the four-way controller (23) to select a setting.
When the quality level is changed, the number of recordable images at that quality level appears at the top right of the screen.
6
Press the 4 button.
The camera returns to the menu screen. Next, set other items.
Press the 3 button to return to Capture or Playback mode.
1
31
Even after you press the 3 button and close the menu screen, your settings will not be saved if the camera is turned off improperly (such as by removing the battery while the camera is on).
If the 3 button is pressed in Capture mode, the [A Rec. Mode] menu appears. If the 3 button is pressed in Playback mode, the [Q Playback] menu appears.
32
Using the Mode Dial
Dial indicator
1
You can switch the Capture mode by setting the icons on the mode dial to the dial indicator.
Page Mode
I (Auto Picture)
= s q
\
(Portrait)
(Landscape)
(Macro)
(Moving Object)
.
(Night Scene Portrait) a (Flash OFF)
H (Scene)
Characteristics
The optimal capture mode is automatically selected from Portrait, Landscape, Macro and
Moving Object modes or standard settings
(Normal mode).
Optimal for capturing portraits.
Deepens the focus range, emphasizes contour and saturation of trees and the sky, and produces a bright image.
Lets you take vibrant pictures of flowers or other small subjects at short distances.
Lets you take sharp pictures of a quickly moving subject, such as a sporting event.
Lets you capture people against a night view or at dusk.
The built-in flash is deactivated. Other settings are the same as the Normal mode in I.
Selects from 8 situations depending on the shooting conditions.
For . (Night Scene Portrait), the shutter speed becomes slower in dark places, even if the built-in flash is used. To prevent camera shake, either use the Shake Reduction function or mount the camera on a tripod.
33 e
K (Sensitivity Priority) b c a p (Bulb)
Mode
(Program)
(Shutter Priority)
(Aperture Priority)
(Manual)
Characteristics
Automatically sets shutter speed and aperture to the proper exposure according to Program line when taking pictures.
Automatically sets the shutter speed and aperture to the proper exposure according to the set sensitivity.
Lets you set the desired shutter speed to freeze or emphasize subject movement. Take pictures of fast moving subjects that look still or subjects that give a sense of movement.
Lets you set the desired aperture for controlling the depth of field. Use it to obtain a blurred or sharp background.
Lets you set shutter speed and aperture to capture the picture with creative intent.
Lets you capture images that require slow shutter speeds such as fireworks and night scenes.
Page
1
In this manual, Capture modes are referred to as follows.
Picture mode
H (Scene) mode
Exposure mode
I (Auto Picture)/ = (Portrait)/ s (Landscape)/ q (Macro)/ \ (Moving Object)/ . (Night Scene
Portrait)/ a (Flash OFF)
A (Night Scene)/ i (Surf & Snow)/ K (Food)/
K (Sunset)/ C (Kids)/ E (Pet)/ D (Candlelight)/
E (Museum) e (Program)/ K (Sensitivity Priority)/ b (Shutter
Priority)/ c (Aperture Priority)/ a (Manual)/ p
(Bulb)
34
Memo
2
Getting Started
This chapter explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions.
Attaching the Strap ..............................................36
Inserting the Batteries .........................................37
Inserting/Removing the SD Memory Card .........41
Attaching the Lens ...............................................45
Adjusting the Viewfinder Diopter ........................47
Turning the Camera On and Off ..........................48
Initial Settings .......................................................49
36
Attaching the Strap
2
1
Pass the end of the strap through the strap lug, then secure it on the inside of the clasp.
2
Pass the other end of the strap through the other strap lug on the camera, then secure it on the inside of the clasp.
Inserting the Batteries
Insert batteries into the camera. Use four AA lithium batteries, AA Ni-MH batteries, or AA alkaline batteries.
This camera is packaged with AA lithium batteries for checking the camera functionality but some other kinds of batteries are also compatible. Use the compatible batteries according to the intended purpose.
2
AA lithium batteries Provided with the camera. Recommended in cold climates.
AA Ni-MH rechargeable batteries
AA alkaline batteries
These are rechargeable and are economical.
A commercially available battery charger that is compatible with the batteries is required.
These are easily obtainable when your usual batteries run out but they may not support all the camera functions under certain conditions. We do not recommend their use except in emergencies and checking the camera functionality.
• The use of Ni-Mn batteries is not recommended as the batteries’ voltage characteristics may cause a malfunction.
• AA lithium batteries and AA alkaline batteries that can be used in this camera are not rechargeable.
• Do not open the battery cover or remove the batteries while the power is on.
• Remove the batteries when you will not use the camera for a long while. The batteries may leak.
• If the date and time settings have been reset when you insert new batteries
after a long time, follow the procedure for “Setting the Date and Time” (p.52).
• Insert batteries correctly. Batteries inserted incorrectly may cause a camera breakdown. Wipe the electrodes of the batteries before inserting.
• Replace all the batteries at the same time and do not mix battery types, brands or old batteries with new ones. Otherwise, malfunctions, such as the battery level not being displayed properly, may occur.
1
Push and hold the battery cover unlock lever as shown in
the illustration (1), and slide the battery cover toward the
lens (2), and then flip open.
1
2
37
38
2
Insert the batteries according to the +/– indicators in the battery chamber.
2
3
Press down on the batteries
with the battery cover (1) and slide it as shown in the
illustration (2) to close.
1
2
Be sure to fully close the battery cover. The camera will not turn on if the battery cover is open.
• Use the AC adapter D-AC76 (optional) when using the camera for a
• Check the battery orientation if the camera does not operate properly after replacing the batteries.
Battery Level Indicator
You can confirm remaining battery level by checking the { displayed on the LCD panel.
: Battery is full.
{ lit
¶
} lit
¶
?
lit
¶
?
blink
: Battery is running low.
: Battery is almost empty.
: The camera turns off after displaying a message.
• } may appear even when the battery level is sufficient if the camera is used at low temperatures or when performing continuous shooting consecutively. Turn the camera off and on again. If { appears, you can use the camera.
• { does not appear on the LCD panel when using the AC adapter D-AC76
(optional).
39
Approximate Image Storage Capacity and
Playback Time (new batteries)
Batteries
AA lithium batteries
AA rechargeable batteries
(NiMH 2500mAh)
(Temperature)
Normal recording
(23°C) 1100
( 0°C)
(23°C)
( 0°C)
900
700
500
Flash photography
50% use 100% use
550
440
400
280
350
250
240
190
Playback time
700 minutes
600 minutes
480 minutes
400 minutes
AA Alkaline batteries
(23°C)
( 0°C)
200
Not applicable
80
Not applicable
50
Not applicable
300 minutes
200 minutes
The picture storage capacity (normal recording and flash use 50%) is based on measuring conditions in accordance with CIPA standards and the others are based on PENTAX measuring conditions. Some deviation from the above figures may occur in actual use depending on shooting mode and shooting conditions.
• Battery performance temporarily decreases as the temperature decreases.
When using the camera in cold climates, have extra batteries on hand and keep them warm in your pocket. Battery performance will return to normal when returned to room temperature.
• Have extra batteries ready when traveling overseas, taking pictures in cold climates, or when you will be taking a lot of pictures.
2
40
Using the AC Adapter (Optional)
4
2
2
1
3
We recommend using the AC adapter D-AC76 (optional) when using the monitor for a long time or when connecting to your PC.
1
Make sure the camera is turned off before opening the terminal cover.
2
Connect the DC terminal on the AC adapter to the DC input terminal on the camera.
3
Connect the AC plug cord to the AC adapter.
4
Plug the AC cord into the power outlet.
• Make sure the camera is turned off before connecting or disconnecting the
AC adapter.
• Make sure connections are secure between the camera, AC adapter, AC plug cord terminal and the power outlet. SD Memory Card and data will be corrupted if disconnected while camera is recording or reading data.
• Be sure to read the AC adapter D-AC76 Operating Manual when using the
AC adapter.
• The rechargeable batteries in your camera will not charge when connected to the AC adapter.
Inserting/Removing the SD Memory
Card
This camera uses either an SD Memory Card or an SDHC Memory Card. (Both cards are referred to as SD Memory Cards hereafter.) Make sure the camera is turned off before inserting or removing the SD Memory Card (market product).
• Do not remove the SD Memory Card while the card access lamp is lit.
• Use this camera to format (initialize) an SD Memory Card that is unused or
has been used on other cameras or digital devices. Refer to “Formatting the
SD Memory Card” (p.203) for details on formatting.
1
Slide the card cover in the
direction of the arrow (1) and
then lift open (2).
1
2
2
41
2
Insert the card all the way with the SD Memory Card label toward the monitor.
Push the SD Memory Card in once to remove.
3
Close the card cover (1) and then slide it in the direction of
the arrow (2).
Be sure to fully close the card cover. The camera will not turn on if the card cover is open.
2
1
42
2
Precautions When Using the SD Memory Card
• The SD Memory Card is equipped with a write-protect switch. Setting the switch to
LOCK protects the existing data by prohibiting recording of new data, deletion of existing data or formatting of the card.
Write-protect switch
• Care should be taken when removing the SD Memory Card immediately after using the camera because the card may be hot.
• Do not remove the SD Memory Card or turn the camera off while data is being saved to the card, images are being played back, or the camera is connected to a computer with the USB cable. This may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.
• Do not remove the SD Memory Card during formatting. The card may be damaged beyond use.
• Data on the SD Memory Card may be deleted in the following circumstances.
PENTAX does not accept any liability for data that is deleted if
(1) the SD Memory Card is mishandled by the user.
(2) the SD Memory Card is exposed to static electricity or electrical interference.
(3) the card has not been used for a long time.
(4) the card is ejected or the battery is removed while the data on the card is being recorded or accessed.
• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.
• Avoid using or storing the card where it may be exposed to static electricity or electrical interference.
• Avoid using or storing the card in direct sunlight or where it may be exposed to rapid changes in temperature or to condensation.
• For information on compatible SD Memory Cards, visit the PENTAX website.
• Format new SD Memory Cards. Also format SD Memory Cards used with other cameras.
1
Formatting the SD Memory Card (p.203)
• Please note that formatting the SD Memory Card will not necessarily delete the data so that it cannot be recovered using off the shelf data recovery software. If you are going to discard, give away or sell your SD Memory Card you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information. There are off the shelf secure data deletion software programs available that will completely delete the data.
In any case the data on your SD Memory Card should be managed at your own risk.
43
Recorded Pixels and Quality Level
When the File Format is JPEG
Choose the number of pixels (size) and quality level (JPEG data compression rate) of pictures according to how you intend to use the pictures you have taken.
Pictures with larger recorded pixels or more Es are clearer when printed.
The number of pictures that can be taken (the number of pictures that can be recorded on an SD Memory Card) decreases with larger file sizes.
The quality of the captured photo or printed picture depends on the quality level, exposure control, resolution of the printer and a variety of other factors so you do not need to select more than the required number of pixels. For example, to print in postcard size, i (1824×1216) is adequate. Set the appropriate recorded size and quality level depending on purpose.
2
Choose the appropriate number of recorded pixels and quality level for
JPEG images on the [A Rec. Mode] menu.
1
Setting the JPEG Recorded Pixels (p.146)
1
Setting the JPEG Quality Level (p.147)
JPEG Recorded Pixels, JPEG Quality and Approximate Image
Storage Capacity
JPEG Quality
JPEG Rec. Pixels
J (3872×2592)
P (3008×2000) i (1824×1216)
C
Best
202
335
902
D
Better
343
570
1549
E
Good
586
974
2627
• The above table shows the approximate image storage capacity when using a 1
GB SD Memory Card.
• The above figures may vary depending on the subject, shooting conditions, shooting mode and SD Memory Card, etc.
When the number of storable images exceeds 500, captured images are divided into folders of 500 images each. However, in Auto Bracket shooting, images will be stored in the same folder until shooting is completed, even if the number of images exceeds 500.
44
2
When the File Format is RAW
With x, you can record in the versatile JPEG format or the high quality and editable RAW format. For RAW file format, you can select the
PENTAX original PEF format or general-purpose DNG (Digital Negative) format designed by Adobe Systems. On a 1 GB SD Memory Card, you can record up to 58 images in PEF format or DNG format.
1
Setting the File Format (p.148)
Attaching the Lens
All camera exposure modes are available when using DA, D FA, FA J or other lenses with an Aperture s (Auto) position. Some functions are restricted when lenses are not set to the Aperture s position. Also see
“Notes on [23. Using Aperture Ring]” (p.230). Other lenses and
accessories will not be available with factory default settings. To allow
2
Turn the camera off before attaching or removing the lens to prevent unexpected lens movement.
1
Check that the camera is turned off.
2
Remove the body mount cover
(1) and lens mount cover (2).
Be sure to put the lens down with the lens mount side facing upward to protect the lens mount from damage after removal.
3
Align the Lens mount index
(red dots) on the camera and the lens, and secure by turning the lens clockwise until it clicks.
After attaching, turn the lens counterclockwise to check that the lens is locked in place.
45
46
4
Remove the front lens cap by pushing the indicated portions inward.
2
To detach the lens, hold down the lens unlock button (3) and turn the lens counterclockwise.
3
• The body mount cover (1) is a cover to prevent scratches and block dust when shipped. Body Mount Cap K is sold separately and has a lock function.
• We assume no responsibility nor liability for accidents, damages and malfunctions resulting from the use of lenses made by other manufacturers.
• The camera body and lens mount incorporate lens information contacts and an AF coupler. Dirt, dust, or corrosion may damage the electrical system.
When necessary, clean the contacts with a soft dry cloth.
Adjusting the Viewfinder Diopter
Adjust the viewfinder to suit your eyesight.
If it is difficult to see the viewfinder image clearly, slide the diopter adjustment lever sideways.
You can adjust the diopter from approximately –2.5 to +1.5 m
–1
.
1
Look through the viewfinder and point the camera at a white wall or other bright and consistent surface. Slide the diopter adjustment lever left or right.
Adjust the lever until the AF frame in the viewfinder is focused.
47
2
AF frame
• The F
P
Eyecup is attached to the viewfinder portion when the camera leaves the factory. Diopter adjustment is available with the F
P
Eyecup attached.
However, adjustment is easier with the eyecup removed.
• To remove the F
P
Eyecup, pull it out in the direction of the arrow.
To attach the F
P
Eyecup, align it with the groove on the viewfinder eyepiece and push it into position.
• If it is difficult to see the viewfinder image clearly even if you set the diopter adjustment lever, use the optional diopter correction lens adapter M. However, the
Eyecup F
P
must be removed to use this
48
Turning the Camera On and Off
2
1
Move the main switch to [ON] position.
The camera will turn on.
Move the main switch to [OFF] position to turn off the camera.
• Always turn the camera off when not in use.
• The power will automatically turn off when you do not perform any operations within a set period of time. To reactivate the camera after the camera turns off automatically, turn it on again or perform any of the following.
• Press the shutter release button halfway.
• Press the Q button.
• Press the M button.
• By default, the camera is set to power off automatically after 1 minute of inactivity. You can change the setting with [Auto Power Off] on the [R Set-up]
Initial Settings
The first time the camera is turned on after purchasing, the [Language/ ] screen appears on the monitor. Follow the procedure below to set the language displayed on the monitor and the current date and time. Once setting is done, these will not need to be set again when turning your camera on.
If the Date Adjust screen appears, set the date
and time by following the procedure in “Setting the Date and Time” (p.52).
MENU C a n c e l OK O K
D a t e A d j u s t
D a t e S t y l e m m / d d / y y 24h
D a t e
Ti m e
0 1 / 0 1
00 : 00
/ 2 0 0 8
MENU C a n c e l OK O K
Setting the Display Language
You can choose the language in which the menus, error messages, etc. are displayed from the following: English, French, German, Spanish, Portuguese,
Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish,
Russian, Korean, Chinese (traditional/simplified) and Japanese.
1
Use the four-way controller
(2345) to select the desired language.
The default setting is English.
2
MENU C a n c e l OK O K
2
Press the 4 button.
The [Initial Setting] screen for the selected language appears.
Press the four-way controller (3) twice and proceed to Step 10 if [Hometown] does not have to be adjusted.
I n i t i a l S e t t i n g
Language E n g l i s h
N e w Yo r k
Te x t S i z e
MENU C a n c e l
S t d .
OK O K
49
50
2
3
Press the four-way controller (3).
The cursor moves to W .
4
Press the four-way controller (5).
The [ W Hometown] screen appears.
5
Use the four-way controller
(45) to select the city.
Hometown
New York
DST
MENU Cancel OK
6
Press the four-way controller (3).
The cursor moves to [DST] (daylight saving time).
7
Use the four-way controller (45) to select O (On) or P (Off).
8
Press the 4 button.
The camera returns to the [Initial Setting] screen.
9
Press the four-way controller (3).
The cursor moves to [Text Size].
10
Press the four-way controller
(5) and use the four-way
controller (23) to select [Std.] or [Large].
I n i t i a l S e t t i n g
Language
N e w Yo r k
E n g l i s h
Selecting [Large] magnifies the selected menu item.
Te x t S i z e
S t d .
L a r g e
MENU C a n c e l OK O K
11
Press the 4 button twice.
The [Date Adjust] screen appears.
In this manual, the menu screens hereafter are described with [Text Size] set to [Std.].
When an Incorrect Language is Set
When you mistakenly select a language in the [Language/ ] screen and proceed to the [Date Adjust] screen, you can perform the following operations to set the correct language.
If you have proceeded to switch the camera to Capture mode (and the camera is ready to take a picture), perform the following operations from
Step 2 to set the correct language.
1
Press the 3 button once to
display the guides (p.49) on the
monitor.
The screen shown on the right is an example of the guides displayed. The displayed screen will vary depending on the selected language.
The guides appear on the monitor for 3 seconds.
2
Press the 3 button once.
AUTO PICT
RAW
OK
2008 01 / 01
A is displayed in the upper tab. ([A Rec. Mode] menu)
3
Press the four-way controller (5) twice.
R is displayed in the upper tab. ([R Set-up] menu)
4
Use the four-way controller (3) to select [Language/ ].
5
Press the four-way controller (5).
The [Language/ ] screen appears.
6
Use the four-way controller (2345) to select the
desired language and press the 4 button.
The [R Set-up] menu for the selected language appears.
Refer to the following pages and set the desired city for [Hometown] and the current date and time as necessary.
• To change Hometown: “Setting the World Time” (p.206)
• To change date and time: “Changing the Date and Time and the Display
2
51
When [Hometown] and the date and time are not set, the [Initial Setting] screen or [Date Adjust] screen will be displayed when the camera is turned on again.
If you have not proceeded to the [Date Adjust] screen, you can reselect the language using the four-way controller (5) in the [Language/ ] screen.
52
Setting the Date and Time
Set the current date and time and the display style.
2
1
Press the four-way controller
(5).
The frame moves to [mm/dd/yy].
D a t e A d j u s t
D a t e S t y l e m m / d d / y y 24h
D a t e
Ti m e
0 1 / 0 1
00 : 00
/ 2 0 0 8
MENU C a n c e l OK O K
2
Use the four-way controller (23) to choose the date style.
3
Press the four-way controller
(5).
D a t e A d j u s t
D a t e S t y l e m m / d d / y y 24h
The frame moves to [24h].
D a t e 0 1 / 0 1 / 2 0 0 8
00 : 00 Ti m e
MENU C a n c e l OK O K
4
Use the four-way controller (23) to select 24h (24-hour display) or 12h (12-hour display).
5
Press the four-way controller (5).
The frame returns to [Date Style].
6
Press the four-way controller (3).
The frame moves to [Date].
7
Press the four-way controller
(5).
The frame moves to the month.
D a t e A d j u s t
D a t e S t y l e m m / d d / y y 24h
D a t e
Ti m e
0 1 / 0 1
00 : 00
/ 2 0 0 8
MENU C a n c e l OK O K
8
Use the four-way controller (23) to set the month.
Set the day and year in the same manner.
Next, set the time.
If you select [12h] in Step 4, the setting switches between am and pm depending on the time.
9
Press the 4 button.
The camera is ready to take a picture.
If you set the date and time with the menu operations, the screen will return to the [R Set-up] menu. Press the 4 button again.
Pressing the 3 button while adjusting the date cancels the settings made so far and switches the camera to Capture mode. If the power is turned on without the date and time set, the [Date Adjust] screen is displayed if Initial
Setting has been performed. You can also set the date later by menu
• When you finish the settings and press the 4 button, the camera clock is reset to 00 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 00 seconds.
• You can change the language and date and time settings with the menu
53
2
54
Memo
3
Basic Operations
This chapter explains basic operations for shooting by setting mode dial to I (Auto Picture) to ensure successful capturing.
For information about advanced functions and settings for taking pictures, refer to chapter 4 and onward.
Basic Shooting Operation ...................................56
Using a Zoom Lens ..............................................61
Using the Built-in Flash .......................................62
Taking Pictures Using the Shake Reduction
Function ................................................................67
Playing Back Still Pictures ..................................70
Deleting Images ....................................................72
56
Basic Shooting Operation
3
Holding the Camera
How you hold the camera is important when taking pictures.
• Hold the camera firmly with both hands.
• Press the shutter release button gently when taking a picture.
Horizontal position Vertical position
• To reduce camera shake, support your body or the camera on a solid object such as a table, tree, or wall.
• Although there are individual differences among photographers, the shutter speed for a handheld camera is generally 1/(focal length ×1.5). For example, it is 1/75 of a second for a focal length of 50 mm and 1/150 of a second for
100 mm. Use a tripod or the Shake Reduction function (p.67) when using a
lower shutter speed.
• When using a telephoto lens, a tripod that is heavier than the total weight of the camera and lens is recommended to avoid camera shake.
• Do not use the Shake Reduction function when using the camera on a tripod.
Letting the Camera Choose the Optimal Settings
The x features various Capture modes, Focus modes, and Drive modes suited for your intentions. This section explains how to take pictures by simply pressing the shutter release button.
1
Set the mode dial to I.
The camera will select the optimal capture mode for the subject.
1
Selecting the Appropriate Capture
3
57
2
Set the focus mode lever to =.
The focus mode changes to l
(Autofocus/Single) mode.
In l, the lens automatically focuses when the shutter release button is pressed halfway. When the image is focused, the shutter can be
58
3
Look through the viewfinder to view the subject.
A zoom lens can be used to change the size of the subject in the viewfinder.
3
4
Position the subject inside the
AF frame and press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when the subject comes into focus.
When set to I (Auto Picture) mode, the optimal capture mode is automatically selected from Portrait, Landscape,
Macro, and Moving Object modes or standard settings (Normal mode).
The flash pops up automatically when necessary. (Push the K button and manually lift the flash when Flash mode is not set to [Auto discharge] or [Auto flash+Redeye reduct]).
1
Operating the shutter release button
1
Subjects that are Difficult to Focus on
Flash status
1
Using the Built-in Flash (p.62)
1
Selecting the Focusing Area (AF Point) (p.105)
Focus indicator
You can preview the image in the monitor and check the composition,
exposure, and focus before taking the picture. (p.112)
5
Press the shutter release button fully.
The picture is taken.
6
Review the captured image on the monitor.
Image appears for 1 second on the monitor after capturing (Instant
Review).
1
Setting the Instant Review (p.211)
1
1
Bright/Dark Area Display (p.211)
You can magnify the image during
Instant Review with the e-dial. (p.162)
You can delete the image during
Instant Review by pressing the i button.
1
Operating the shutter release button
The shutter release button has two working positions.
Not pressed Pressed halfway
(first position)
Pressed fully
(second position)
Pressing it down halfway (first position) turns on the viewfinder and
LCD panel indicators and the autofocus system operates. Pressing it fully (second position) takes the picture.
• Press the shutter release button gently when taking a picture to prevent camera shake.
• Practice pressing the shutter release button halfway to learn where the first position is.
• The viewfinder indicators stay on while shutter release button is pressed halfway. The indications stay on for about 10 seconds (default setting) while the exposure metering timer is on after the button is
59
3
60
3
Subjects that are Difficult to Focus on
The autofocus mechanism is not perfect. Focusing may be difficult when taking pictures under the following conditions ((a) to (f) below). These also apply to manual focusing using the focus indicator ] in the viewfinder.
If the subject cannot be focused automatically, set the focus mode lever to
\ and use the manual focus mode to focus on the subject with the aid
of the matte field in the viewfinder. (p.110)
(a) Extremely low-contrast subjects such as a white wall in the focusing area.
(b) Subjects which do not reflect much light within the focusing area.
(c) Fast moving objects.
(d) Strongly reflected light or strong backlighting (bright background).
(e) If repeating vertical or horizontal line patterns appear within the focusing area.
(f) Multiple subjects in the foreground and background within the focusing area.
Subject may not be focused even when ] (focus indicator) is displayed when
(e) and (f) above apply.
Using a Zoom Lens
Enlarge the subject (telephoto) or capture a wider area (wide angle) with a zoom lens. Adjust the subject to the desired size and take the picture.
1
Turn the zoom ring to the right or left.
Turn the zoom ring clockwise for telephoto and counterclockwise for wide angle.
3
61
Wide Angle Telephoto
• The smaller the number of the displayed focal length, the wider the angle.
The larger the number, the more magnified the image appears.
• Power Zoom functions (Image Size Tracking, Zoom Clip, and Auto Zoom
Effect) are not compatible with this camera.
62
Using the Built-in Flash
3
Use the following procedures to take a picture in low light or backlit conditions or when you want to manually use the built-in flash.
The built-in flash is optimum at about 0.7 m to 5 m from the subject.
Exposure will not be properly controlled and vignetting may occur when used at a distance closer than 0.7 m (this distance varies slightly
depending on the lens being used and set sensitivity (p.132)).
Compatibility of built-in flash and lens
Vignetting (darkening of the corners of the image due to a lack of light) may occur depending on the lens being used and the capture conditions. We recommend taking a test shot to confirm this.
1 DA, D FA, FA J, FA and F Lens Compatibility with the Built-in Flash
• When using the built-in flash, remove the lens hood before shooting.
• The built-in flash fully discharges for lenses without a function to set aperture lens ring to s (Auto).
g b i
D r
Flash Mode
Auto discharge
Flash On
Auto flash+Redeye reduct
Flash On+Red-eye
Wireless Mode
Function
Camera automatically determines ambient light and built-in flash pops up. The flash pops up and discharges automatically when necessary, such as when using a shutter speed likely to cause camera shake or in backlit conditions. The flash may pop up but may not discharge if the camera determines that the flash is not necessary.
Discharges flash manually. Discharges when the flash is popped up, does not discharge when retracted.
Lights a red-eye reduction light before automatic flash.
Discharges flash manually. Lights a red-eye reduction light before discharging the flash.
You can synchronize a dedicated external flash
(AF540FGZ or AF360FGZ) without using a sync cord.
Selecting Flash Mode
1
Press the { button.
The Fn menu appears.
2
Press the four-way controller (3).
Fn
OK
Fn
The [Flash Mode] screen appears.
OK
3
63
64
3
Use the four-way controller (45) to choose a flash mode.
Turn the e-dial to perform Flash exposure compensation. (p.128)
When the mode dial is set to e, K, b, c, a or p, g and i appear gray and cannot be selected.
4
Press the 4 button.
The camera is ready to take a picture.
3
Using Auto Discharge g, i (Automatic Flash Popup)
1
Set the mode dial to H, I, =, q, \ or ..
The flash is deactivated when A (Night Scene), K (Sunset),
D (Candlelight) or E (Museum) is selected in H (Scene) mode.
2
Press the shutter release button halfway.
The built-in flash pops up if necessary and begins charging. When the flash is fully charged, b appears in the LCD
panel and viewfinder. (p.27, p.29)
Switch between Auto discharge mode and Flash On mode by pressing the K button while the built-in flash is popped up. If Auto discharge is set, E appears on the LCD panel.
3
Press the shutter release button fully.
The picture is taken.
4
Push down on the portion indicated in the illustration to retract the flash.
Using Flash On Mode
b
, D
1
Press the K button.
The built-in flash pops up and begins charging. Flash On mode is used regardless of the flash mode settings.
When the flash is fully charged, b appears in the LCD panel and
When Flash mode is set to g or i and you pop up the built-in flash, you can switch between Auto discharge mode and Flash On mode by pressing the K button under the following conditions.
• Shooting mode is set to I, =, s, q , \, or ..
• H mode is set to i, K, C, or E.
2
Press the shutter release button fully.
The flash discharges and the picture is taken.
3
Push the flash down to retract.
65
3
66
3
Using Red-eye Reduction Flash
“Red-eye” is the phenomenon where eyes look reddish in photographs taken in dark environments with a flash. This is caused by the reflection of the electronic flash in the retina of the eye. Red-eye occurs because pupils are dilated in dark environments.
This phenomenon cannot be averted but the following measures can be used to combat it.
• Brighten the surroundings when shooting.
• Set to wide angle and move closer to the subject if a zoom lens is in use.
• Use a flash that supports red-eye reduction.
• Position the flash as far away from the camera as possible when using an external flash.
The red-eye reduction function on this camera reduces red-eye by discharging the flash twice. With the red-eye reduction function, the pre-flash is discharged just before the shutter is released. This reduces pupil dilation. The main flash is then discharged while the pupils are smaller, reducing the red-eye effect.
To use the red-eye reduction function in Picture mode or H mode, select D
(Auto flash+Redeye reduct) or F (Flash On+Red-eye). Set to F (Flash
On+Red-eye) in other modes.
Daylight-Sync Shooting
In daylight conditions, the flash will eliminate shadows when a portrait picture is taken with a person’s face cast in shadow. Use of the flash in this way is called Daylight-Sync Shooting. Flash On is used when shooting with Daylight-Sync Shooting.
Taking pictures (Auto Picture mode)
1 Pop up the flash manually and confirm that the flash mode is set to E
2 Confirm that the flash is fully charged.
3 Take the picture.
The picture may be overexposed if the background is too bright.
Without Daylight-Sync With Daylight-Sync
Taking Pictures Using the Shake
Reduction Function
67
You can easily take sharp pictures using the Shake Reduction function by simply turning on the Shake Reduction switch.
Shake Reduction
The Shake Reduction function reduces camera shake that occurs when the shutter release button is pressed. This is useful for taking pictures in situations where camera shake is likely to occur. The Shake
Reduction function allows you to take pictures at approximately 4 steps slower shutter speed without the risk of camera shake.
The Shake Reduction function is ideal when taking pictures in the following situations.
• When taking pictures in dimly lit locations, such as indoors, at night, on cloudy days and in the shade
• When taking telephoto pictures
Blurred picture
Picture taken with the Shake Reduction function
3
• The Shake Reduction function does not compensate for blurring caused by subject movement. To take pictures of a moving subject, increase the shutter speed.
• The Shake Reduction function may not fully reduce camera shake when taking close-up shots. In this case, it is recommended that the Shake
Reduction function be turned off and the camera be used with a tripod.
• The Shake Reduction function will not fully work when shooting with a slower shutter speed, for example when shooting a moving subject or night scenes. In this case, it is recommended that the Shake Reduction function be turned off and the camera be used with a tripod.
Shake Reduction Function and Lens Focal Length
The Shake Reduction function operates by acquiring the lens information such as focal length.
If the camera uses a DA, D FA, FA J, FA or F lens, the lens information is automatically acquired when the Shake Reduction function is activated.
[Focal Length] cannot be set on the [Input Focal Length] menu in the [A
Rec. Mode] (The menu items cannot be selected).
If another type of lens is used, the lens information cannot be automatically acquired even when the Shake Reduction function is activated.
In this case, the [Input Focal Length] setting menu appears. Set [Focal
Length] manually on the [Input Focal Length] setting menu.
1
Setting the Shake Reduction Function (p.69)
68
3
Turning On the Shake Reduction Function
1
Turn on the Shake Reduction switch.
When the shutter release button is pressed halfway, k appears in the viewfinder and the Shake Reduction function turns on.
• Be sure to turn off the Shake Reduction switch when using the camera with a tripod.
• The Shake Reduction function automatically turns off in the following situations.
When using self-timer, 2 sec. self-timer, remote control shooting, remote control (3 sec. delay) shooting, bulb shooting, or wireless mode with an external flash
• If a type of lens that does not support automatic acquisition of lens
information such as focal length is used (p.67), the [Input Focal Length] menu
appears. Set [Focal Length] manually on the [Input Focal Length] setting
menu. 1 Setting the Shake Reduction Function (p.69)
• Turn the Shake Reduction switch off if you will not use the Shake Reduction function.
• The Shake Reduction function will not fully work (for about 2 seconds) right after turning on the camera or restoring from Auto Power Off. Wait for the
Shake Reduction function to become stable before gently pressing the shutter release button to take a picture. Press the shutter release button halfway. The camera is ready to take pictures when k appears in the viewfinder.
• Shake Reduction is available with any x compatible PENTAX lens.
However, when the aperture ring is set at other than the s (Auto) position or a lens without an s position is used, the camera does not operate unless [23.
Using aperture ring] (see p.76; see p.30 - p.31 for operation method) is set to
[Permitted] in the [A Custom Setting] menu. Set this beforehand. Note that some functions are restricted when [23. Using aperture ring] is set to
[Permitted] in the [A Custom Setting] menu. Refer to “Notes on [23. Using
Aperture Ring]” (p.230) for details.
Setting the Shake Reduction Function
The [Input Focal Length] setting menu appears when the camera is turned on with the Shake Reduction switch on and a type of lens that does not support automatic acquisition of lens information such as focal length
Set [Focal Length] manually on the [Input Focal Length] setting menu.
69
• The [Input Focal Length] setting menu does not appear when using a lens that supports automatic acquisition of lens information such as focal length because [Focal Length] is set automatically.
• When using a lens without the s position on the aperture or with the aperture set to a position other than the s position, set [23. Using aperture ring] on
the [A Custom Setting] (p.76) menu to [Permitted].
1
Use the four-way controller
(45) or the e-dial to set [Focal
Length].
Select from the following 34 focal length values. (The default setting is 35.)
8 10 12 15 18 20 24 28 30 35
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
I n p u t F o c a l L e n g t h
F o c a l L e n g t h
100
120
135
MENU C a n c e l OK O K
3
• If the focal length for your lens is not listed above, select the value closest to the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
• When using a zoom lens, select the actual focal length at the zoom setting in the same manner.
• Effect of Shake Reduction is influenced by the shooting distance as well as focal length information. The Shake Reduction function may not perform as expected when shooting at close ranges.
2
Press the 4 button.
The camera is ready to take a picture.
To change the Focal Length setting, use [Input Focal Length] on the [A Rec.
70
Playing Back Still Pictures
Playing Back Images
You can play back captured still pictures with the camera.
Use the included “PENTAX PHOTO Browser 3” software to play back using a
PC. Refer to the “PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3
Operating Manual” for details.
3
1
Press the Q button after taking a picture.
The most recently captured image
(image with the largest file number) is displayed on the monitor.
Press the M button during playback to switch the information display such as the image data for the displayed image.
Refer to p.25 - p.26 for display
information details.
M
1/2000
F2.8
Standard
M M
No info. display
M
/
10
/ 2008
Detailed information display
2
Press the four-way controller
(45).
4 : The previous image appears.
5 : The next image appears.
Refer to “Playback Functions” (p.157) for playback mode details.
71
3
72
Deleting Images
Deleting a Single Image
You can delete one image at a time.
• Deleted images cannot be restored.
• Protected images cannot be deleted.
3
1
Press the Q button and use the four-way controller (45) to select an image to delete.
2
Press the i button.
The Delete screen appears.
3
Use the four-way controller
(23) to select [Delete].
Select the file format to delete for images saved in RAW+ format.
Delete JPEG Deletes only the JPEG image.
Delete RAW Deletes only the RAW image.
Delete
RAW+JPEG
Deletes both file formats.
4
Press the 4 button.
The image is deleted.
D e l e t e
OK
When deleting multiple images, refer to “Deleting Multiple Images” (p.173).
4
Shooting Functions
This chapter describes the various basic and advanced shooting functions available with the x.
How to Operate the Shooting Menus .................74
Selecting the Appropriate Capture Mode for
Scenes ...................................................................78
Setting the Exposure ...........................................81
Focusing .............................................................102
Checking the Composition, Exposure and Focus
Before Shooting .................................................112
Continuous Shooting .........................................115
Self-Timer Shooting ...........................................117
Remote Control Shooting (Remote Control F: Sold
Separately) ..........................................................120
Using Mirror Up Function to Prevent Camera
Shake ...................................................................123
74
How to Operate the Shooting Menus
Press the 3 button in Capture mode. The [A Rec. Mode] menu appears.
[A Rec. Mode] Menu Setting Items
4
Perform settings related to capturing in the [A Rec. Mode] menu.
Item
AF Mode
AE Metering
Select AF point
File Format
JPEG Recorded
Pixels
JPEG Quality
RAW file format
Color Space
| button
Memory
Input Focal Length
Function
Selects the autofocus mode.
Selects the part of the screen to use for measuring brightness and determining exposure.
Selects the part of the screen to focus on.
Sets the file format.
Sets the recording size of images for JPEG shooting.
Sets the image quality for JPEG shooting.
Sets the file format for RAW shooting.
Sets the color space to use.
Sets the | button function.
Sets the settings to save when the power is turned off.
Sets the focal length when using a lens for which focal length information cannot be acquired.
Page
75
[A Custom Setting] Menu Setting Items
Set custom functions to fully use the functions of a SLR camera with the
Custom Setting Menu. The default setting does not change custom function.
The [A Custom Setting] menu settings are activated when [Setting], the first item, is O (On).
Item
Setting
1. EV Steps
Function
Sets to change custom function.
Sets the adjustment steps for exposure.
2. Sensitivity Steps Sets the adjustment steps for ISO sensitivity.
3. Meter Operating
Time
4. L with AF locked
5. Link AF Point and
AE
6. Auto Bracketing order
7. Adjust White
Balance
8. Superimpose AF
Area
Sets the exposure metering time.
Sets whether to lock the exposure value when the focus is locked.
Sets whether to link the exposure and AF point in the focusing area during multi-segment metering.
Sets the order for Auto bracket shooting.
Enables fine tuning the white balance.
9. AF in remote control
Sets whether to display the selected AF point
(focus position) in the viewfinder.
Sets whether to use Autofocus when shooting with remote control.
Shutter releases after AF activates if shutter is released from remote control when set to [On].
Shutter cannot be released until in focus.
AF does not activate at shutter release from remote control when set to [Off].
10. Slow Shutter
Speed NR
11. High-ISO Noise
Reduction
Sets whether to use Noise Reduction in slow speed shooting.
Sets whether to use Noise Reduction when shooting with a high ISO. Select from three levels.
12. 4 button when shooting
Sets the action for the 4 button when pressed during shooting.
13. e-dial in Program Sets the e-dial in e (Program) mode.
Page
-
4
76
4
Item
14. Green button in
Manual
15. Release when
Charging
16. Flash in Wireless
Mode
17. WB when using flash
18. Preview Method
19. Display
Sensitivity
20. Saving rotation info
21. Auto Image
Rotation
22. Catch-in focus
23. Using aperture ring
Reset Custom
Function
Function
Selects the exposure adjustment method when the Green button is pressed in a (Manual) mode.
Sets to release shutter while the built-in flash is charging.
Sets the built-in flash discharge method in wireless mode.
Sets whether to change the White Balance setting when using flash to [Flash].
Sets Preview Method when the main switch is turned to the preview position (|).
Sets whether to switch the number of recordable images in the LCD panel and viewfinder to the sensitivity display.
Sets whether to save rotation information when shooting.
Sets to automatically rotate images when playing back.
When set to [On], if the focus mode is set to l and a manual focus lens is attached, catch-in focus shooting is possible and the shutter is released automatically when the subject comes into focus.
Sets to enable shutter release when lens aperture ring is set at other than the s position.
Resets all the settings in the [A Custom Setting] menu to the defaults.
Page
-
–
–
77
Shooting Fn Menu Setting Items
Press the { button in Capture mode. The
Fn menu appears.
Fn CUSTOM IMAGE
OK
Fn
Press the four-way controller (2345) or the 4 button to set the operation.
Key or
Button
2
3
4
5
4
Item Function Page
Drive Mode
Flash Mode
White Balance
Sensitivity
Selects Continuous shooting, Selftimer, Remote control or Auto Bracket shooting.
Adjusts the method of flash discharge.
Adjusts the color balance to match the type of the light source illuminating the subject.
Sets the sensitivity.
Custom Image Sets image processing.
4
78
Selecting the Appropriate Capture
Mode for Scenes
Select = (Portrait), s (Landscape), q (Macro), \ (Moving Object),
.
(Night Scene Portrait), a (Flash OFF), H (Scene) with the mode dial if desired image is not captured in I (Auto Picture) mode.
The characteristics of the modes are as follows.
4
Dial indicator
I (Auto Picture)
= s q
Mode
(Portrait)
(Landscape)
(Macro)
Characteristics
The optimal capture mode is automatically selected from Portrait, Landscape, Macro and Moving Object modes or standard settings (Normal mode).
Optimal for capturing portraits.
Deepens the focus range, emphasizes contour and saturation of trees and the sky, and produces a bright image.
Lets you take vibrant pictures of flowers and other small subjects at short distances.
\ (Moving Object)
Lets you take sharp pictures of a quickly moving subject, such as at a sporting event.
.
(Night Scene Portrait) Lets you capture people against a night view or at dusk.
a (Flash OFF)
The flash is deactivated. Other settings are the same as the Normal mode in I.
H (Scene)
Lets you select from 8 shooting scenes depending on the shooting conditions.
For . (Night Scene Portrait), the shutter speed becomes slower in dark places, even if the built-in flash is used. To prevent camera shake, either use the Shake Reduction function or mount the camera on a tripod.
79
Selecting the Shooting Scene
By setting the mode dial to H (Scene), you can choose from the following 8 shooting scenes.
Mode
A (Night Scene) i (Surf & Snow)
K (Food)
K (Sunset)
C (Kids)
E (Pet)
D (Candlelight)
E (Museum)
Characteristics
Used for night scenes. Use a tripod, etc. to prevent shaking.
For capturing images of dazzling backgrounds, such as snowy mountains.
For capturing images of food. Saturation will be rather high to make it look appetizing.
For capturing the sunrise or sunset in beautiful colors.
For capturing moving kids. Reproduces healthy and bright skin tone.
For capturing moving pets.
For capturing scenes in candlelight.
For capturing images in places where a flash is prohibited.
4
The flash is deactivated in A (Night Scene), K (Sunset), D (Candlelight) and E (Museum) modes. To prevent camera shake, either use the Shake
Reduction function or mount the camera on a tripod.
How to Select a Shooting Scene
1
Set the mode dial to H (Scene).
2
Press the { button.
The Fn menu appears. The icon for the currently selected shooting scene appears in the Fn menu screen in
H (Scene) mode.
Fn
OK
Fn
80
3
Press the 4 button.
The mode palette appears.
SCN N i g h t S c e n e
INFO
4
4
Use the four-way controller
(2345) to choose a Scene mode.
SCN
Press the M button to display the custom image and use the four-way controller (45) to change the scene.
Settings, such as those for Image Tone, cannot be changed.
INFO
P e t
OK
OK
INFO OK
5
Press the 4 button.
The camera is ready to take a picture.
Set [Scene Display] in [Memory] to O (On) to display the picture in Step 3 in
the format last used (mode palette or custom image). Refer to “Selecting
Capture Mode Settings to Save in the Camera” (p.217) for details.
Setting the Exposure
81
Effect of Aperture and Shutter Speed
Correct exposure of the subject is determined by the combination of shutter speed and aperture setting. There are many correct combinations of shutter speed and aperture for a particular subject. Different combinations produce different effects.
Effect of Shutter Speed
The shutter speed determines the length of time that light is allowed to strike the CCD.
Using slower shutter speed
If the subject is moving, the image will be blurred because the shutter is open longer.
It is possible to enhance the effect of motion (rivers, waterfalls, waves, etc.) by intentionally using a slower shutter speed.
Using faster shutter speed
Choosing a faster shutter speed will allow freezing the action of a moving subject.
A faster shutter speed also helps preventing camera shake.
4
82
Effect of Aperture
Adjust the amount of light hitting the CCD by changing the aperture.
Opening the aperture (reduce the aperture value)
Objects closer and farther than the focused subject will be more out of focus. For instance, if you take a picture of a flower against a landscape with the aperture open, the landscape in front and behind the flower will be blurred, emphasizing only the flower.
4
Closing the aperture (increase the aperture value)
The range in focus expands forward and backward. For instance, if you take a picture of a flower against a landscape with the aperture narrowed, the landscape in front and behind the flower will be in focus.
Depth of Field
When you focus on a portion of the subject, there is a range in which both objects closer and farther will also be in focus. This focused range is called the depth of field.
• The depth of field for the x differs depending on the lens but compared to a 35 mm camera, the value is roughly one aperture setting lower (the focused range becomes narrower).
• The wider the wide-angle lens, and the farther away the subject, the deeper the depth of field is (some zoom lenses do not have a scale for depth of field because of their designs).
Depth of field
Area of focus
Aperture
Lens focal length
Distance to the subject
Shallow
Narrow
Open
(Smaller value)
Longer
(Telephoto)
Near
Deep
Wide
Close
(Larger value)
Shorter
(Wide-angle)
Far
Setting the Sensitivity
You can set the sensitivity to suit the brightness of the surroundings.
The sensitivity can be set to [AUTO] or within a sensitivity range equivalent to ISO 100 to 1600. The default setting is [AUTO].
Set [Sensitivity] in the Fn menu. (p.77)
83
Fn OK
• [Sensitivity] in the Fn menu cannot be used to set the sensitivity when the exposure mode is set to K (Sensitivity Priority). Turn the e-dial in Capture
mode to make the setting. (p.88)
• Captured images can show more noise if a higher sensitivity is set. You can reduce image noise by setting [11. High-ISO Noise Reduction] in the [A
• You can set whether to lock the ISO sensitivity adjustment to increments of
1 EV or to coordinate it with the EV Steps (p.101) in [2. Sensitivity Steps] in
the [A Custom Setting] menu (p.75).
4
Setting the Range of Automatic Correction in AUTO
Set range to automatically correct sensitivity when Sensitivity is set to
[AUTO]. The sensitivity is automatically corrected in the range of [ISO 100-
400] by default.
Turn the e-dial to set the upper sensitivity limit in [Sensitivity] in the Fn menu.
When the exposure mode is set to a (Manual) or p (Bulb), the sensitivity cannot be set to [AUTO].
84
Checking the Sensitivity in Capture Mode
Press the 4 button in Capture mode. The set sensitivity is displayed on the LCD panel and in the viewfinder.
You can display the number of recordable images by pressing the 4 button when the exposure mode is set to K (Sensitivity Priority).
4
Expanding the Dynamic Range
Dynamic range is the ratio that indicates the light level expressed by the
CCD pixels from bright areas to dark areas.
By using the Expand Dynamic Range function, you can expand the light level expressed by the CCD pixels, making it more difficult for bright areas to occur in the image.
Press the { button for the [Sensitivity] setting in the Fn menu to turn this function on or off.
Fn OK
When the dynamic range is expanded, the sensitivity range is reduced to ISO
200 to 1600.
85
Noise Reduction
When you use a digital camera to shoot with a long exposure or high sensitivity setting, image noise (image roughness or unevenness) becomes noticeable.
You can reduce image noise by using Noise Reduction. Images shot with Noise Reduction take longer to save.
Slow Shutter Speed NR
Reduces noise during long exposures.
Select from [On] or [Off] for [10. Slow Shutter Speed NR] in the
[A Custom Setting] menu (p.75).
High-ISO Noise Reduction
Reduces noise at high sensitivity (ISO) settings.
Select from [Off], [Weakest], [Weak], or [Strong] for [11. High-ISO
Noise Reduction] in the [A Custom Setting] menu (p.75).
4
Changing the Exposure Mode
This camera features the following six exposure modes.
Use the mode dial (p.32) to change the exposure mode. The settings
available for each exposure mode are as follows.
Exposure
Mode
Description e
(Program)
K
(Sensitivity
Priority) b
(Shutter
Priority)
Automatically sets shutter speed and aperture to the proper exposure according to
Program line when taking pictures.
Automatically sets the shutter speed and aperture to the proper exposure according to the set sensitivity.
Lets you set the desired shutter speed for expressing moving subjects.
EV Compensation
Change
Shutter
Speed
Change
Aperture
Change
Sensitivity
Page
Yes
Yes
Yes
#*
No
Yes
#*
No
No
Yes
Other than
Auto
Yes
86
4
Exposure
Mode
Description
EV Compensation
Change
Shutter
Speed
Change
Aperture
Change
Sensitivity
Page c
(Aperture
Priority) a
(Manual) p (Bulb)
Lets you set aperture for controlling the depth of field.
Lets you set shutter speed and aperture to capture the picture with creative intent.
Lets you capture images that require slow shutter speeds such as fireworks and night scenes.
Yes
No
No
No
Yes
By user’s action
Yes
Yes
Yes
Yes
Other than
Auto
Other than
Auto
* In [13. e-dial in Program] in the [A Custom Setting] menu, you can set to change either the shutter speed or aperture when the e-dial is turned.
Using the e (Program) Mode
Automatically sets shutter speed and aperture to the proper exposure according to Program line when taking pictures.
Use the e-dial to change the shutter speed or aperture while maintaining
the proper exposure (Hyper-program) (p.88).
1
Set the mode dial to e.
2
Turn the e-dial while pressing
the mc button and adjust the exposure.
The EV Compensation is displayed in the viewfinder and on the LCD panel.
The shutter speed and aperture value are also displayed while adjusting the exposure.
EV Compensation
• Set EV Compensation in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps]
in the [A Custom Setting] menu. (p.101)
• You can automatically correct the sensitivity if appropriate exposure cannot
be set with the set criteria. Set [Sensitivity] to [AUTO] in the Fn menu. (p.83)
• When using a lens with an aperture ring, set the aperture to the s position while holding down the auto-lock button on the lens.
4
87
88
4
e
(Program) mode and e-dial
You can set the action for the e-dial when turned in e (Program) mode. Set in [13. e-dial in Program] in the [A Custom Setting] menu.
1 Program shift
2
3
4 b c
Off
Automatically adjusts the aperture value and shutter speed in order to obtain the appropriate exposure.
• Press the Green button to return to Program
Automatic Exposure.
Switches to Shutter Priority Automatic Exposure when the e-dial is turned.
• You can set a shutter speed to a value that will give a correct exposure with the aperture range of the lens being used.
• If the brightness changes and the aperture value is outside the relative range, the aperture value will blink in the viewfinder and on the LCD panel.
• When a picture is taken with b shift, b is displayed for the exposure mode in the image information.
• Press the Green button to return to Program
Automatic Exposure.
Switches to Aperture Priority Automatic Exposure when the e-dial is turned.
• You can set the aperture to a value that will give a correct exposure within the range of available shutter speeds.
• If the brightness changes and the shutter speed is outside the relative range, the shutter speed will blink in the viewfinder and on the LCD panel.
• When a picture is taken with c shift, c is displayed for the exposure mode in the image information.
• Press the Green button to return to Program
Automatic Exposure.
Disables e-dial operation while Program Automatic
Exposure is set.
Using the K (Sensitivity Priority) Mode
You can set the sensitivity to suit the brightness of the subject.
The shutter speed and aperture are automatically set according to the selected sensitivity to obtain the appropriate exposure.
1
Set the mode dial to K.
2
Turn the e-dial and adjust the sensitivity.
The shutter speed, aperture value and sensitivity are displayed in the viewfinder and on the LCD panel.
• You can set the sensitivity to values equivalent to ISO 100 to 1600. [AUTO] is not available.
• Turn the e-dial while pressing the mc button to change the EV
• Set the sensitivity in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps] in the
[A Custom Setting] menu. (p.101)
• You cannot set the sensitivity in [Sensitivity] in the Fn menu.
• When using a lens with an aperture ring, set the aperture to the s position while holding down the auto-lock button on the lens.
4
89
90
Using the b (Shutter Priority) Mode
Lets you set the desired shutter speed for expressing moving subjects.
When taking pictures of a fast moving subject, you can increase the shutter speed to make the subject look still or decrease the shutter speed to have the subject show movement.
Aperture value is automatically set to give the appropriate exposure depending on the shutter speed.
1 Effect of Aperture and Shutter Speed (p.81)
1
Set the mode dial to b.
4
2
Turn the e-dial and adjust the shutter speed.
The shutter speed can be set within the range of 1/4000 to 30 seconds.
The shutter speed and aperture value are displayed in the viewfinder and on the
LCD panel.
• Turn the e-dial while pressing the mc button to change the EV
• Set the shutter speed in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps]
in the [A Custom Setting] menu. (p.101)
• You can automatically correct the sensitivity if appropriate exposure cannot
be set with the set criteria. Set [Sensitivity] to [AUTO] in the Fn menu. (p.83)
• When using a lens with an aperture ring, set the aperture to the s position while holding down the auto-lock button on the lens.
91
Exposure Warning
If the subject is too bright or too dark, the aperture value will blink in the viewfinder and on the LCD panel. If the subject is too bright, choose a faster shutter speed. If it is too dark, choose a slower shutter speed. When the aperture value indication stops blinking, you can take the picture with proper exposure.
Use an ND (Neutral Density) filter if the subject is too bright. Use a flash if it is too dark.
4
92
Using the c (Aperture Priority) Mode
Set aperture for controlling the depth of field. The depth of field is deeper and the front and back of the focused object is clear when aperture is set to a large value. The depth of field is shallower and the front and back of the focused object is blurred when aperture is set to a small value.
Shutter speed is automatically set to appropriate exposure depending on the aperture value.
1 Effect of Aperture and Shutter Speed (p.81)
1
Set the mode dial to c.
4
2
Turn the e-dial and adjust the aperture value.
The shutter speed and aperture value are displayed in the viewfinder and on the LCD panel.
• Turn the e-dial while pressing the mc button to change the EV
• Set the aperture value in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps]
in the [A Custom Setting] menu. (p.101)
• You can automatically correct the sensitivity if appropriate exposure cannot
be set with the set criteria. Set [Sensitivity] to [AUTO] in the Fn menu. (p.83)
• When using a lens with an aperture ring, set the aperture to the s position while holding down the auto-lock button on the lens.
93
Exposure Warning
If the subject is too bright or too dark, the shutter speed will blink in the viewfinder and on the LCD panel. If the subject is too bright, set the aperture smaller (larger number), and when too dark, open the aperture further (smaller number). Once blinking stops, you can take the picture with the proper exposure.
Use an ND (Neutral Density) filter if the subject is too bright. Use a flash if it is too dark.
4
94
Using a (Manual) Mode
You can set the shutter speed and aperture value. This mode is suitable to take pictures of your choice by combining them. This mode is convenient for taking pictures using the same combination of the shutter speed and aperture settings or taking intentionally underexposed (darker) or over-exposed (brighter) photographs.
1
Effect of Aperture and Shutter Speed (p.81)
1
Set the mode dial to a.
4
2
Turn the e-dial and adjust the shutter speed.
3
Turn the e-dial while pressing
the mc button and adjust the aperture.
95
The shutter speed and aperture value are displayed in the viewfinder and on the LCD panel. Of the shutter speed and aperture value, the value being adjusted is underlined in the viewfinder. While adjusting the shutter speed or aperture value, the difference from the appropriate exposure (EV value) appears in the viewfinder. The appropriate exposure is set when
[0.0] is displayed.
Difference from the appropriate exposure
• When the sensitivity is set to [AUTO] and exposure mode is set to a
(Manual) mode, the sensitivity is set to a value equivalent to ISO 100 if the
Dynamic Range is set to [Off] and ISO 200 if set to [On].
• Set the shutter speed and aperture values in increments of 1/2 EV or 1/3 EV.
Set in [1. EV Steps] in the [A Custom Setting] menu. (p.101)
• When using a lens with an aperture ring, set the aperture to the s position while holding down the auto-lock button on the lens.
4
Exposure Warning
While adjusting the shutter speed or aperture value, the difference from the appropriate exposure blinks when it becomes larger than ±3.0.
96
Combining with L
Press the L button (p.101) to record the exposure value in a
(Manual) mode. If the shutter speed or aperture is then changed, the combination of shutter speed and aperture changes while exposure is retained.
Example: If the shutter speed is 1/125 sec and aperture is F5.6 and is recorded with the L button, and the shutter speed is changed to 1/30 sec with the e-dial, the aperture automatically changes to F11.
4
About the Green Button
The aperture and shutter speed are automatically adjusted to the appropriate exposure at that moment if the Green button is pressed in a (Manual) mode. You can set the adjustment methods in [14.
Green button in Manual] in the [A Custom Setting] menu.
1
2
3
4
Program Line b Shift c Shift
Off
The aperture and shutter speed are adjusted automatically.
The aperture is locked and the shutter speed is adjusted automatically.
The shutter speed is locked and the aperture is adjusted automatically.
Disables Green button operation while Manual
Exposure is set.
Shutter speed is adjusted to appropriate exposure according to lens aperture when lens aperture is not set to s position.
1
Notes on [23. Using Aperture Ring] (p.230)
Using the p (Bulb) Mode
This mode is useful for the long exposures required for shooting night scenes and fireworks.
The shutter remains open as long as the shutter release button is kept pressed.
1
Set the mode dial to p.
97
EV compensation, Continuous shooting and Exposure Bracket are not available in p (Bulb) mode.
• Turn the e-dial to adjust the aperture value.
• Set the aperture value in increments of 1/2 EV or 1/3 EV. Set in [1. EV Steps]
in the [A Custom Setting] menu. (p.101)
• The Shake Reduction function is automatically turned off when exposure mode is set to p (Bulb) mode.
• Use a sturdy tripod and the cable switch CS-205 (optional) to prevent camera shake when using p (Bulb) mode. Connect the cable switch to the cable
• Bulb shooting is available when using the remote control shooting mode
(p.120). The shutter remains open as long as the shutter release button of
the optional remote control is held down.
• Noise reduction is a process to reduce noise (image roughness or
unevenness) caused by slow shutter speed. Set in [10. Slow Shutter Speed
NR] in the [A Custom Setting] menu. (p.85)
• When the sensitivity is set to [AUTO] and exposure mode is set to p (Bulb) mode, the sensitivity is set to a value equivalent to ISO 100 if the Dynamic
Range is set to [Off] and ISO 200 if set to [On].
4
98
Selecting the Metering Method
4
Choose the part of the screen to use for measuring brightness and determining exposure. L (Multi-segment metering), M (Center-weighted metering) or N (Spot metering) mode can be selected. The default setting is L (Multi-segment metering).
L Multi-segment
M
N
Centerweighted
Spot Metering
Segments the viewfinder in 16 parts, meters each portion and determines the appropriate exposure.
Measures the entire viewfinder with an emphasis on the center and determines the exposure.
Measures only the center of the viewfinder and determines exposure.
Set in [AE Metering] in the [A Rec. Mode] menu (p.74).
R e c . M o d e
A F M o d e
A E M e t e r i n g
S e l e c t A F p o i n t
F i l e F o r m a t
J P E G R e c . P i x e l s
J P E G Q u a l i t y
MENU C a n c e l
AF.S
10
OK O K
Using the Multi-Segment Metering
The scene in the viewfinder is metered in
16 different zones as shown in the illustration when using the multi-segment metering. Even in backlit locations, this mode automatically determines what level of brightness is in which portion and automatically adjusts exposure.
Multi-segment metering mode is not available when using a lens other than a
DA, D FA, FA J, FA, F or A lens, or when lens aperture ring is set at other than s .
99
Linking AF Point and AE During Multi-Segment
Metering
In [5. Link AF Point and AE] of the [A Custom Setting] menu (p.75),
you can link the exposure and AF point in the focusing area during multi-segment metering. The default setting is [Off].
1
2
Off
On
Exposure is set separately from AF point.
Exposure is set in accordance with AF point.
Using the Center-Weighted Metering
Metering is weighted at the center of the screen.
Use this metering when you want to compensate the exposure by experience, instead of leaving it to the camera. The illustration shows that sensitivity increases as the pattern height increases (center). This mode does not automatically compensate for backlit scenes.
Using the Spot Metering
With spot metering, brightness is measured only within a limited area at the center of the screen as shown in the illustration. You can use this in combination with the AE lock
(p.101) when the subject is extremely small
and proper exposure is difficult to obtain.
Setting the Meter Operating Time
Sets the exposure metering time in [3. Meter Operating Time] in the
[A Custom Setting] menu (p.75). The default setting is [10 sec].
1
2
3
10 sec Sets exposure metering timer to 10 seconds.
3 sec Sets exposure metering timer to 3 seconds.
30 sec Sets exposure metering timer to 30 seconds.
4
100
Adjusting the Exposure
This allows you to deliberately overexpose (brighten) or under-expose
(darken) your picture.
Select 1/2 EV or 1/3 EV in [1. EV Steps] in the [A Custom Setting] menu.
You can adjust the EV compensation from –2 to +2 (EV).
1
Set the compensation by turning the e-dial while the mc button is pressed.
mc button
4 m is displayed in the viewfinder and on the LCD panel during compensation.
Press the mc button to confirm the compensation value on the LCD panel.
Compensation value
Exposure compensation is not available when the exposure mode is set to a
(Manual) or p (Bulb) mode.
• The EV compensation cannot be canceled by turning the camera off or by setting any other exposure mode.
• The EV compensation value is reset to [0] when the Green button is pressed while the mc button is pressed.
Changing the Exposure Steps
Set Exposure Steps in [1. EV Steps] in the [A Custom Setting] menu to
increments of 1/2 EV or 1/3 EV.
1. E V S t e p s
1 / 2 E V S t e p s
1 / 3 E V S t e p s
101
E x p o s u r e s e t t i n g s t e p s a r e s e t t o 1 / 2 E V
Recording the Exposure Before Shooting (AE Lock)
AE Lock is a function that memorizes the exposure prior to taking the picture. Use this when the subject is too small or backlit and a proper exposure setting cannot be obtained.
1
Press the L button.
The camera memorizes the exposure
(brightness) at that instant.
Press it again to unlock.
4
• @ is displayed in the viewfinder while the AE lock is engaged. (p.27)
• The exposure remains locked as long as the L button is kept pressed or the shutter release button is kept pressed halfway. The exposure remains in memory for a period between 0.5× to 2× the metering timer after releasing the L button.
• You will hear a beep when the L button is pressed. The beep can be
• AE lock is not available when the exposure mode is p (Bulb) mode.
• The combination of shutter speed and aperture value changes depending on the zooming position even while the AE lock is engaged when using a zoom lens for which the maximum aperture varies depending on the focal length.
However, the exposure value does not change and the picture is taken at the brightness level set by the AE lock.
• Exposure can be locked when focus is locked. Set in [4. L with AF
locked] in the [A Custom Setting] menu. (p.108)
102
Focusing
You can focus with the following methods.
= Autofocus
\ Manual focus
The camera is focused when the shutter release button is pressed halfway.
Manually adjust the focus.
Using the Autofocus
4
You can also choose the autofocus mode from l (Single mode) where the shutter release button is pressed halfway to focus on the subject and the focus is locked at that position, and k (Continuous mode) where the subject is kept in focus by continuous adjustment while the shutter release button is pressed halfway.
1
Set the focus mode lever to
=.
2
Look through the viewfinder and press the shutter release button halfway.
The focus indicator ] appears and you will hear a beep when the subject comes into focus. (When blinking, the subject is not in focus.)
1
Subjects that are Difficult to Focus on (p.60)
Focus Indicator
Using the 4 Button to Focus on the Subject
You can set the camera so that the focusing is not performed when the shutter release button is pressed halfway and is performed when the 4 button is pressed. Use this setting when the autofocus by pressing the shutter release button halfway is not desired.
Set [Enable AF] in [12. 4 button when shooting] in the [A Custom
12. OK button when shooting
S e n s i t i v i t y / N o . o f S h o t s
C e n t e r o f A F P o i n t
E n a b l e A F
C a n c e l A F
A F w i t h s h u t t e r r e l e a s e b u t t o n d i s a b l e d s o A F p e r f o r m e d w i t h O K b u t t o n
4
103
104
• When [Sensitivity/No. of Shots] is selected, press the 4 button to display the currently selected sensitivity in the viewfinder. When [Sensitivity] is set to
[AUTO] in the Fn menu, the automatically selected value is displayed.
• When [Select AF point] is set to S (Select) and [Center of AF Point] is selected, the AF point can be set to the center by pressing the 4 button.
• Select [Cancel AF]. \ appears in the viewfinder while the 4 button is pressed. Autofocus does not activate when the shutter release button is pressed (take your finger off the 4 button to immediately return to AF mode).
Setting the AF Mode
4 You can choose from the following two autofocus modes. The default setting is l (Single mode).
l k
Single mode
Continuous mode
When the shutter release button is pressed halfway to focus on the subject, the focus is locked at that position.
The subject is kept in focus by continuous adjustment while the shutter release button is pressed halfway.
Even if the subject is not in focus, the shutter can be released when the shutter release button is pressed fully.
Set “AF Mode” in the [A Rec. Mode] menu (p.74).
R e c . M o d e
A F M o d e
A E M e t e r i n g
S e l e c t A F p o i n t
F i l e F o r m a t
J P E G R e c . P i x e l s
J P E G Q u a l i t y
MENU C a n c e l
AF.S
AF.C
JPEG
10
OK O K
105
• Setting cannot be changed in Picture mode and
• k (Continuous mode) can be set when the mode dial is set to e, K, b, c , a or p. The autofocus mode is set to k in \ (Moving Object) of
Picture mode or C (Kids) or E (Pet) of H mode.
• In l (Single mode), the focus is locked (focus lock) while the focus indicator ] is displayed in the viewfinder. To focus on another subject, take your finger off the shutter release button first.
• During \ (Moving Object) mode, when the H mode is set to C (Kids) or
E (Pet) or when k (Continuous mode) is set, focus is adjusted continuously, tracking the moving object as long as the shutter release button is kept pressed halfway.
• The shutter cannot be released until the subject is in focus in l (Single mode). If the subject is too close to the camera, move back and take the
picture. Adjust the focus manually if the subject is difficult to focus (p.60).
• In l (Single mode), press the shutter release button halfway. The built-in flash will discharge automatically several times, enabling the autofocus to focus on the subject more easily if the subject is in a dark area and the builtin flash is available.
• Regardless if the camera is set to l (Single mode) or k (Continuous mode), the camera automatically tracks the subject if it is determined to be a moving object.
4
Selecting the Focusing Area (AF Point)
Choose the part of the viewfinder to set focus to. The default setting is
N (Auto).
The selected AF point lights red in the viewfinder. (Superimpose AF Area)
N
S
O
Auto
Select
The camera selects the optimum AF point even if the subject is not centered.
Sets the focusing area to one of the eleven points in the AF area.
Center Sets the focusing area to the center of the viewfinder.
106
Set in [Select AF point] in the [A Rec. Mode] menu (p.74).
R e c . M o d e
A F M o d e
A E M e t e r i n g
S e l e c t A F p o i n t
F i l e F o r m a t
J P E G R e c . P i x e l s
J P E G Q u a l i t y
MENU C a n c e l
AF.S
0.0
OK O K
4
• AF point is not displayed in the viewfinder when [Off] is selected for [8.
Superimpose AF Area] in the [A Custom Setting] menu (p.75).
• The AF point is fixed to the center position regardless of this setting with lenses other than DA, D FA, FA J, FA or F lenses.
Setting the Focus Position in the Viewfinder
1
Select S (Select) in [Select AF point] in the [A Rec.
Mode] menu.
2
Look through the viewfinder and check the position of the subject.
3
Use the four-way controller (2345) to select the desired
AF point.
The AF point lights red in the viewfinder (Superimpose AF Area) and you can check where you set the AF point.
Fixing the Focus (Focus Lock)
If the subject is outside the range of the focusing area, the camera cannot automatically focus on the subject. In this situation, set [AF Mode] to l
(Single mode). You can aim the focusing area toward the subject, use focus lock and recompose the picture.
1
Frame the desired composition for your picture in the viewfinder.
Use focus lock function when the subject you wish to focus on is not inside the focusing area.
4
107
(Example) The person is out of focus and the background is focused instead.
2
Center the subject to focus in the viewfinder and press the shutter release button halfway.
The focus indicator ] appears and you will hear a beep when the subject comes into focus. (When blinking, the subject is not in focus.)
3
Lock the focus.
Keep the shutter release button pressed halfway. The focus will remain locked.
108
4
Re-compose the picture while keeping the shutter release button pressed halfway.
4
• The focus is locked while the focus indicator ] is lit.
• Turning the zoom ring in focus lock mode may cause the subject to be out of focus.
• The beep that sounds when the image is focused can be turned off. (p.204)
• You cannot set focus lock when the [AF Mode] in the [A Rec. Mode] is set to k (Continuous mode), the Picture mode is set to \ (Moving Object) or H mode is set to C (Kids) or E (Pet). In k (Continuous mode), \
(Moving Object) mode or C (Kids) or E (Pet) of H mode, the autofocus continues to focus on the subject until the shutter is released (Continuous
Autofocus).
Locking Exposure when Focus is Locked
Set [4. L with AF locked] in the [A Custom Setting] menu (p.75) to
lock the exposure value while focus is locked. Exposure is not locked by default during focus lock.
1
2
Off
On
Exposure is not locked when focus is locked.
Exposure is locked when focus is locked.
4. A E - L w i t h A F l o c k e d
O f f
O n
A E i s n o t l o c k e d w h e n t h e f o c u s i s l o c k e d
Adjusting the Focus Manually (Manual Focus)
When you adjust the focus manually, you can either check with the focus indicator in the viewfinder or use the viewfinder matte field to adjust focus.
Using the Focus Indicator
The focus indicator ] appears in the viewfinder when the subject is in focus even during manual focus.
You can manually adjust the focus using the focus indicator ].
1
Set the focus mode lever to
\ .
4
109
2
Look through the viewfinder, press the shutter release button halfway and turn the focusing ring.
The focus indicator ] appears and you will hear a beep when the subject comes into focus.
Focus Indicator
110
• Focus manually using the matte field in the viewfinder when the subject is
difficult to focus (p.60) and the focus indicator will not stay lit.
• The beep that sounds when the image is focused can be turned off. (p.204)
Using the Viewfinder Matte Field
You can manually adjust the focus using the viewfinder matte field.
1
Set the focus mode lever to
\ .
4
2
Look through the viewfinder and turn the focusing ring until the subject looks sharp on the focusing screen.
111
Shooting in Catch-in Focus Mode
When [22. Catch-in focus] is set to On in the [A Custom Setting] menu
(p.76), if the focus mode is set to l and one of the following types of
lenses is attached, catch-in focus shooting is possible and the shutter is released automatically when the subject comes into focus.
• Manual focus lens
• DA or FA lens that has a = and \ setting on the lens (the setting on the lens must be set to \ before shooting)
How to Take Pictures
1 Attach a proper lens to the camera.
2 Set the focus mode lever to =.
3 Set [AF mode] in the [A Rec. Mode] menu to l.
4 Set focus on a position the subject will pass.
5 Press the shutter release button fully.
The shutter is released automatically when the subject comes into focus in the set position.
4
It is useful to use the optional cable switch CS-205 when shooting in Catch-in focus mode.
112
Checking the Composition, Exposure and Focus Before Shooting
You can use the preview function to check the depth of field, composition, exposure and focus before taking a picture. There are two preview methods.
Digital Preview
Optical Preview
For checking the composition, exposure and focus in the monitor.
For checking the depth of field with the viewfinder.
4
Selecting the Preview Method
Choose whether to use Digital Preview or Optical Preview when the main switch is turned to the preview position (|).
The default setting is Digital Preview.
Set in [18. Preview Method] in the [A Custom Setting] menu (p.76).
18. P r e v i e w M e t h o d
D i g i t a l P r e v i e w
O p t i c a l P r e v i e w
F o r c h e c k i n g e x p o s u r e , c o m p o s i t i o n a n d f o c u s w / L C D b e f o r e s h o o t i n g
Displaying the Preview
Displaying the Digital Preview
1
Focus on the subject, then compose the picture in the viewfinder and move the main
switch to |.
The icon (|) appears in the monitor during preview and you can check the composition, exposure and focus.
Press the shutter release button halfway to end Digital Preview and start focusing.
4
• You can display the histogram or Bright/Dark area warning in Digital Preview.
Set in [Digital Preview] (p.212) in the [Q Playback] menu.
• The maximum display time for Digital Preview is 60 seconds.
• You can magnify the image during Digital Preview with the e-dial. (p.162)
• Press the { button during Digital Preview to save the preview image as a
JPEG image. The image save confirmation screen appears. Select [Save as] and press the 4 button.
113
Displaying the Optical Preview
1
Position the subject inside the
AF frame and press the shutter release button halfway to focus on the subject.
114
2
Turn the main switch to | while looking through the viewfinder.
You can check the depth of field in the viewfinder while the main switch is on |.
• No shooting information is displayed in the viewfinder, and the shutter cannot be released while the main switch is in the preview position (|).
• You can check the depth of field in all Capture modes.
4
Continuous Shooting
Pictures can be taken continuously while the shutter release button is held down.
Two types of Continuous shooting are available. With g (Continuous shooting (Hi)), pictures are taken continuously at the fastest frame rate until the camera buffer memory becomes full. With h (Continuous shooting (Lo)), pictures are taken continuously at the same interval.
g Continuous shooting (Hi) h Continuous shooting (Lo)
When JPEG quality is set to J (Quality Level
C ), up to 4 frames are taken continuously at approximately 2.8 fps. The shooting interval will increase as the camera buffer memory fills up.
When JPEG quality is set to J (Quality Level
C ), pictures are taken continuously at approximately 1.1 fps until the SD Memory Card is full.
4
When saving in RAW format, a maximum of 4 frames can be taken continuously in either Continuous shooting mode.
1
Press the { button.
The Fn menu appears.
Fn CUSTOM IMAGE
OK
Fn
2
Press the four-way controller
(2).
The [Drive Mode] screen appears.
115
OK
116
3
Use the four-way controller
(45) to select g.
4
OK
4
Press the four-way controller (3) and use the four-way
controller (45) to select g or h.
5
Press the 4 button.
The camera is ready to take pictures continuously.
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
7
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully pressed. Take your finger off the shutter release button to stop.
• If the AF mode is set to l (Single mode), the focus position is locked on the first frame and pictures are taken continuously at the same interval.
• Focusing is continuously active when the AF Mode is set to k
(Continuous mode), when Picture mode is set to \ (Moving Object) or H mode is set to C (Kids) or E (Pet). Note that the shutter will be released even if the focusing is not complete.
• The shutter cannot be released until charging is complete when using the built-in flash. You can set the camera to enable shutter release before the built-in flash is ready in [15. Release when Charging] in the [A Custom
• Select a setting other than g or h in the [Drive Mode] screen to cancel continuous shooting. The setting is canceled when the camera is turned off if
[Drive Mode] in [Memory] (p.217) of the [A Rec. Mode] menu is set to P
(Off).
Self-Timer Shooting
This camera has two types of self-timers: g and Z.
g
Z
Shutter will be released after about 12 seconds. Use this mode to include the photographer in the picture.
A mirror pops up immediately after shutter release button is pressed.
Shutter is released after about 2 seconds. Use this mode to avoid camera shake when the shutter release button is pressed.
1
Mount the camera onto a tripod.
4
117
2
Press the { button.
The Fn menu appears.
Fn
OK
CUSTOM IMAGE
Fn
3
Press the four-way controller
(2).
The [Drive Mode] screen appears.
4
Use the four-way controller (45) to select g.
OK
118
5
Press the four-way controller (3) and use the four-way controller
(45) to select g or Z.
OK
4
6
Press the 4 button.
The camera is ready to take a picture.
7
Confirm in the viewfinder that the subject you wish to shoot is properly framed and press the shutter release button halfway.
The focus indicator ] appears in the viewfinder when the subject is in focus.
8
Press the shutter release button fully.
For g, the front self-timer lamp starts blinking slowly and blink rapidly 2 seconds before the shutter is released.
The beep is heard and the rate increases.
The shutter will be released about 12 seconds after the shutter release button is pressed fully.
For Z, the shutter will be released about 2 seconds after the shutter release button is pressed fully.
• You can set the camera so that the beep does not sound. (p.204)
• Exposure may be affected if light enters the viewfinder. Attach the provided
ME viewfinder cap or use the AE lock function (p.101). (The light entering the
viewfinder has no effect on the exposure when the exposure mode is set to a
119
Removing the Eyecup F
P
Attaching the ME Viewfinder cap
• Select a setting other than g or Z in the [Drive Mode] screen to cancel selftimer shooting. The setting is canceled when the camera is turned off if [Drive
Mode] in [Memory] of [A Rec. Mode] menu (p.217) is set to P (Off).
• The Shake Reduction function is automatically turned off when g or Z is set.
4
120
Remote Control Shooting (Remote
Control F: Sold Separately)
The shutter can be released from a distance by using the optional remote control unit. You can select h (immediate shutter release) or i (3 sec. delayed release) for remote control shooting.
h i
The shutter will be released immediately after the shutter release button on the remote control unit is pressed.
When the shutter release button on the remote control unit is pressed, the shutter is released after about 3 seconds.
4
1
Mount the camera onto a tripod.
2
Press the { button.
The Fn menu appears.
Fn CUSTOM IMAGE
OK
3
Press the four-way controller (2).
The [Drive Mode] screen appears.
4
Use the four-way controller (45) to select h.
Fn
5
Press the four-way controller (3) and use the four-way controller
(45) to select hor i.
The self-timer lamp will blink to let you know that the camera is in remote control wait status.
OK
6
Press the 4 button.
The camera is ready to take a picture.
7
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
• You cannot focus with the remote control unit in default settings. Focus on the subject first with the camera before operating with the remote control.
You can set [9. AF in remote control] to [On] in the [A Custom Setting] menu
• When using the remote control unit, flash does not pop up automatically even when set to g (Auto discharge). Pop up the flash manually beforehand.
121
4
8
Point the remote control unit towards the remote control receiver on the front of the camera and press the shutter release button on the remote control.
5 m
The operating distance of the remote control unit is about 5 m from the front of the camera.
For h, the shutter will be released immediately after the shutter release button is pressed.
For i, the shutter will be released in three seconds after the shutter release button is pressed.
After the picture is taken, the self-timer lamp lights for 2 seconds and then returns to blinking.
122
• Exposure may be affected if light enters the viewfinder. Attach the provided
ME viewfinder cap or use the AE lock function (p.101). (The light entering the
viewfinder has no effect on the exposure when the exposure mode is set to a
4
Removing the Eyecup F
P
Attaching the ME Viewfinder cap
• Select a setting other than hor i in the [Drive Mode] screen to stop the remote control operation after it has been activated. The setting is canceled
when the camera is turned off if [Drive Mode] in [Memory] (p.217) of [A Rec.
Mode] menu is set to P (Off).
• The Shake Reduction function is automatically turned off when hor i is set.
• The remote control may not operate in backlit conditions.
• The remote control does not work while the flash is being charged.
• The remote control unit battery can send a remote control signal about
30,000 times. Contact PENTAX Service Center to replace the battery (this will involve a fee).
Using Mirror Up Function to Prevent
Camera Shake
Use the Mirror Up function if camera shake is evident even when cable switch (optional) or remote control unit (optional) is used with a tripod.
When shooting with the 2 sec. Self-Timer, the mirror pops up and the shutter is released 2 seconds after you press it, thereby avoiding the vibration of the mirror.
Follow the procedure below to take a picture with the Mirror Up function.
1
Mount the camera onto a tripod.
2
In the Drive Mode, select
Z
(2 sec. Self-Timer).
3
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
4
Press the shutter release button fully.
The mirror pops up and the picture is taken 2 seconds later. AE lock is enabled with the exposure value set immediately before the mirror goes up.
4
123
The Shake Reduction function is automatically turned off when shooting with the 2 sec. Self-Timer.
124
Changing the Shooting Conditions
Automatically when Shooting (Auto Bracket)
Shooting in Exposure Bracket Mode
You can take continuous pictures with different exposure when the shutter release button is pressed. The first frame is exposed with no compensation, the second frame is underexposed (negative compensation) and the third is overexposed (positive compensation).
4
Normal exposure Underexposure Overexposure
You can set [6. Auto Bracketing order] in the [A Custom Setting] menu
Auto Bracketing order 0 ´ – ´ +, – ´ 0 ´ +, + ´ 0 ´ –, 0 ´ + ´ –
1
Press the { button in Capture mode.
The Fn menu appears.
Fn CUSTOM IMAGE
OK
Fn
2
Press the four-way controller (2).
The [Drive Mode] screen appears.
3
Use the four-way controller (5)
to select l (Auto Bracket).
OK
4
Turn the e-dial to set the EV compensation value.
The following EV compensation values can be set according to the step
interval set in [1. EV Steps] (p.101) in the [A Custom Setting] menu.
Step interval
1/2 EV
1/3 EV
EV compensation value
±0.5, ±1.0, ±1.5, ±2.0
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0
5
Press the 4 button.
The camera is ready to take a picture and ] is displayed on the LCD panel.
4
6
Press the shutter release button halfway.
The focus indicator ] and EV compensation value appear in the viewfinder when focused.
7
Press the shutter release button fully.
Three continuous pictures will be taken, the first with no compensation, the second with negative compensation, and the third with positive compensation.
125
126
4
• When the AF mode is set to l (Single mode), the focus is locked in the first frame position and used for subsequent continuous frames.
• When you release your finger from the shutter release button during Auto
Bracket, the Auto Bracket exposure setting will remain effective for twice as much time as the exposure metering timer (default setting is 20 seconds)
(p.99) and you can take a picture at the next compensation value. In this
case, auto focusing works for each frame. After about twice as much time as the exposure metering timer, the camera returns to settings for taking the first picture.
• You can combine Auto Bracket with the built-in flash or external flash (P-TTL auto only) to change only the flash output continuously. However, when using an external flash, holding the shutter release button down to take three continuous frames may cause the second and third frame to be taken before the flash is fully recharged. Always take one frame at a time after confirming that charging is complete.
• Exposure Bracket is not available when the exposure mode is set to p (Bulb) mode.
Taking Only Overexposed or Underexposed Pictures
You can use Auto Bracket mode for only underexposure or overexposure shots by combining the operation with EV
compensation (p.100). Auto Bracket is performed in both cases on
the basis of the specified EV compensation value.
5
Using the Flash
This chapter provides details on the built-in flash of x and describes how to take pictures with the external flash.
Compensating Flash Output .............................128
Allowing Shooting while Charging the Flash ..129
Flash Characteristics in Each Exposure Mode
..............................................................................130
Distance and Aperture when Using the Built-in
Flash ....................................................................132
Using an External Flash (Optional) ...................134
128
Compensating Flash Output
You can change the flash output in a range of –2.0 to +1.0. The flash compensation values are as follows for 1/2 EV and 1/3 EV.
Step interval
1/2 EV
1/3 EV
Flash compensation
–2.0, –1.5, –1.0, –0.5, 0.0, +0.5, +1.0
–2.0, –1.7, –1.3, –1.0, –0.7, –0.3, 0.0, +0.3, +0.7, +1.0
* Set interval of steps in [1. EV Steps] (p.101) in the [A Custom Setting] menu.
Set the flash compensation value by turning the e-dial in the [Flash Mode]
5
OK
• If the maximum flash output is exceeded when corrected to the plus (+) side, no compensation will be effective.
• Compensating to the minus (–) side may not effect the image if the subject is too close, aperture is low or sensitivity is high.
• This flash compensation is also effective for external flash units which support P-TTL auto flash mode.
• Pressing the Green button on the [Flash Mode] screen resets the flash exposure compensation to the default setting [0.0].
Allowing Shooting while Charging the
Flash
You can set to enable shooting while the flash is being charged.
Set [On] for [15. Release when Charging] in the [A Custom Setting] menu
(p.76). Pictures cannot be taken while the flash is charging by default.
15. R e l e a s e w h e n C h a r g i n g
O f f
O n
129
E n a b l e s s h u t t e r r e l e a s e w h i l e t h e b u i l t - i n f l a s h i s c h a r g i n g
5
130
Flash Characteristics in Each
Exposure Mode
Using the Flash in b (Shutter Priority) Mode
• When taking a moving subject, you can use the flash to change the blur effect.
• Any desired shutter speed 1/180 sec. or slower can be set for taking a flash photograph.
• The aperture value automatically changes according to the ambient brightness.
• The shutter speed is locked at 1/180 sec. when lens other than DA, D
FA, FA J, FA, F or A is used.
5
Using the Flash in c (Aperture Priority) Mode
• You can set the desired aperture to take a flash photograph when you want to change the depth of field or shoot a subject farther away.
• The shutter speed automatically changes with the ambient brightness.
• The shutter speed shifts automatically anywhere from 1/180 sec. to a
slow shutter speed (p.56) that reduces camera shake. The slowest
shutter speed depends on the focal length of the lens in use.
• The shutter speed is locked at 1/180 sec. when lens other than DA, D
FA, FA J, FA or F is used.
131
Using Slow-Speed-Sync
You can use slow-speed-sync when shooting portraits with the sunset in the background. Both the portrait and the background are captured beautifully.
• Slow-speed-sync slows the shutter speed. Use the Shake Reduction function or turn off the Shake Reduction function and use a tripod to avoid camera shake. The picture will also blur if the subject moves.
• Slow-speed-sync shooting can also be performed with an external flash.
Using b (Shutter Priority) Mode
1 Set the mode dial to b.
b (Shutter Priority) mode is set.
2 Use the e-dial to set the desired shutter speed.
The background is not properly exposed if aperture value is blinking when shutter speed is set. Set the shutter speed so that aperture value does not blink.
3 Press the K button.
The flash pops up.
4 Take the picture.
Using a (Manual) Mode
1 Set the mode dial to a.
a (Manual) mode is set.
2 Set the shutter speed (under 1/180 sec.) and aperture value to obtain correct exposure.
3 Press the K button.
The flash pops up.
In a (Manual) mode, you can raise the flash at any time prior to shooting.
4 Take the picture.
5
132
Distance and Aperture when Using the Built-in Flash
A set criteria is necessary between the guide number, aperture and distance when shooting with the flash to obtain the correct exposure.
Calculate and adjust the shooting conditions if flash output is not sufficient.
Built-in flash guide number
ISO Sensitivity
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
Built-in flash guide number
Approx. 13
Approx. 18.4
Approx. 26
Approx. 36.8
Approx. 52
5
Calculating Shooting Distance from Aperture Value
The following equation calculates the distance of the flash for aperture values.
Maximum flash distance L1 = Guide number ÷ Selected aperture
Minimum flash distance L2 = Maximum flash distance ÷ 5*
* The value 5 used in the formula above is a fixed value which applies only when using the built-in flash alone.
Example
When sensitivity is [ISO 100] and aperture value is F2.8
L1 = 13 ÷ 2.8 = approx. 4.6 (m)
L2 = 4.6 ÷ 5 = approx. 0.9 (m)
Therefore, the flash can be used in a range of about 0.9 m to 4.6 m.
The flash cannot be used when the distance is 0.7 m or less. When the flash is used at closer than 0.7 m, it causes vignetting in the picture corners, light is distributed unevenly and the picture may be over-exposed.
Calculating Aperture Value from Shooting Distance
The following equation calculates the aperture value for shooting distances.
Aperture value used F = Guide number ÷ Shooting distance
Example
When sensitivity is [ISO 100] and shooting distance is 3 m, aperture value is:
F = 13 ÷ 3 = 4.3
If the resulting number (4.3, in the above example) is not available as a lens aperture, the smaller number that is closest (4.0, in the above example) is generally used.
DA, D FA, FA J, FA and F Lens
Compatibility with the Built-in Flash
133
Depending on the lens used with the x, even if a lens without a hood is attached, the use of the built-in flash may not be possible or may be limited due to vignetting.
DA, D FA, FA J, and FA lenses not listed below can be used without problems.
* Following are evaluated without a hood.
Unavailable due to vignetting
Lens Name
DA Fish-eye 10-17mm F3.5-4.5ED (IF)
DA12-24mm F4ED AL
DA14mm F2.8ED (IF)
FA300mm F2.8ED (IF)
FA600mm F4ED (IF)
FA250-600mm F5.6ED (IF)
5
Available depending on other factors
Lens Name
F Fish-eye 17-28mm F3.5-4.5
DA16-45mm F4ED AL
DA16-50mm F2.8ED AL (IF) SDM
DA18-250mm F3.5-6.3ED AL (IF)
FA28-70mm F2.8AL
FA Soft 28mm F2.8
FA Soft 85mm F2.8
Compatibility
Vignetting may occur if focal length is less than
20 mm.
When the focal length is less than 28 mm or when the focal length is 28 mm and the shooting distance is 1 m or less, vignetting may occur.
When the focal length is 20 mm or less or when the focal length is 35 mm and the shooting distance is less than 1.5 m, vignetting may occur.
Vignetting may occur if the focal length is less than 35 mm.
Vignetting may occur if focal length is 28 mm and the shooting distance is less than 1 m.
Built-in flash always discharges fully.
Built-in flash always discharges fully.
134
Using an External Flash (Optional)
5
Using the optional external flash AF540FGZ, AF360FGZ or AF200FG enables a variety of flash modes, such as P-TTL auto flash mode, depending on the external flash being used. See the chart below for details.
(Yes: Available #: Restricted No: Not available)
Camera Function
Red-eye reduction flash
Flash
Automatic flash discharge
After the flash is charged, the camera automatically switches to the flash sync speed.
Aperture is automatically set in e (Program) mode and b (Shutter Priority) mode.
Built-in
Flash
Yes
Yes
Yes
Yes
AF540FGZ
AF360FGZ
Yes
Yes
Yes
Yes
AF200FG
Yes
Yes
Yes
Yes
Auto check in the viewfinder No No No
P-TTL auto flash (appropriate sensitivity:
ISO 100 to 1600)
Slow-speed sync
Yes
*1
Yes
*1
Yes
*1
Yes Yes Yes
Flash exposure compensation
AF illuminator
Trailing curtain sync
*2
Contrast-control-sync flash mode
Yes
Yes
Yes
# *3
Yes
Yes
Yes
Yes
Yes
No
No
# *5
Slave flash
Multiple flash
No
No
Yes
No
No
No
High-speed flash sync
Wireless flash
No
# *5
Yes
Yes *4
No
No
*1 When using DA, D FA, FA J, FA, F or A lens.
*2 Shutter speed of 1/90 sec. or slower.
*3 When combined with the AF540FGZ or AF360FGZ, 1/3 of the flash discharge can be output by the built-in flash and 2/3 can be output by the external flash.
*4 Multiple AF540FGZ or AF360FGZ units or a combination of an AF540FGZ/AF360FGZ unit and the built-in flash is required.
*5 Only available when combined with the AF540FGZ or AF360FGZ.
135
About the LCD Panel Display for AF360FGZ
The AF360FGZ does not have the function to set the FORMAT size to
[DIGITAL], but the difference in angle of view between standard 35 mm format and the x is automatically calculated based on the focal length of the lens used (when using DA, D FA, FA J, FA or F lenses).
The conversion indicator appears and the format size indicator disappears when the exposure metering timer of the x is on (it returns to 35 mm format display when the exposure metering timer is turned off).
Lens focal length
AF360FGZ
LCD panel
Exposure metering timer
Off
Exposure metering timer
On
85mm 77mm 50mm 35mm 28mm 24mm 20mm 18mm
85mm
58mm
70mm 50mm
48mm 34mm
35mm
24mm
28mm 24mm
19mm 16mm *
*
* Using wide-angle panel
Using P-TTL Auto Mode
Use this flash mode with the AF540FGZ, AF360FGZ or AF200FG flash unit. When the flash mode is set to [P-TTL auto], the flash pre-flashes before the actual flash and confirms the subject (the distance, brightness, contrast, whether it is backlit, etc.) using the camera 16-segment metering sensor. The flash output for the actual flash is adjusted based on the information obtained from the pre-flash, enabling flash photography with more appropriate exposure for the subject than with normal TTL auto.
P-TTL auto is available in wireless flash mode when two or more
AF540FGZ or AF360FGZ units are used.
5
1 Remove the cover of the hot shoe and attach the external flash
(AF540FGZ or AF360FGZ).
2 Turn on the camera and the external flash.
3 Set the external flash mode to [P-TTL auto].
4 Confirm that the external flash is fully charged and then take the picture.
136
• P-TTL auto is only available with the AF540FGZ, AF360FGZ or AF200FG flash unit.
• The b will light in the viewfinder when the flash is ready (fully charged).
• For details such as operation method and effective distance, please read the external flash manual.
• The flash does not discharge when the subject is bright enough when Flash
Mode is g or i. Therefore, it may not be suitable for daylight-sync shooting.
• Never press the K button when any external flash unit is attached to the camera. The built-in flash will hit the external flash. If you want to use both at
once, see p.140 for the connection method.
5
Using High-Speed Flash Sync Mode
With the AF540FGZ or AF360FGZ, you can discharge the flash to take a picture at a shutter speed faster than 1/180 second. High-speed flash sync can be used with the flash attached to the camera, or wireless.
Attaching and Using the AF540FGZ or AF360FGZ
1 Remove the cover of the hot shoe and attach the external flash
(AF540FGZ or AF360FGZ) to the camera.
2 Turn the mode dial and set the exposure mode to b or a.
3 Turn on the camera and the external flash.
4 Set the external flash sync mode to HSb (high-speed flash sync).
5 Confirm that the external flash is fully charged and then take the picture.
• The b will light in the viewfinder when the flash is ready (fully charged).
• High-speed flash sync is only available when the shutter speed is faster than
1/180 sec.
• High-speed flash sync is not available when the exposure mode is set to p
(Bulb).
Using in Wireless Mode
By using two external flashes (AF540FGZ or AF360FGZ) or using the built-in flash with an external flash, you can shoot in P-TTL flash mode without connecting the flash units with a cord. High-speed sync mode is also available for wireless shooting.
• Set the power switch of the external flash to WIRELESS.
• Set the wireless mode of the external flash not directly connected to the camera to SLAVE.
Setting the Channel for the External Flash
First set the channel for the external flash unit.
1 Set the channel for the external flash unit.
2 Attach the external flash to the camera hot shoe.
3 Turn on the camera and the external flash, and press the shutter release button halfway.
The built-in flash is set to the same channel as the external flash unit.
• When set to r mode, the channel currently set for the built-in flash is displayed on the LCD panel for 10 seconds.
• Be sure to set all the flashes to the same channel. Refer to the AF540FGZ or
AF360FGZ operating manual for details on how to set the channel on the external flash.
Using the Built-in Flash in Wireless Mode
Set the camera to wireless flash mode when using an external flash in combination with the built-in flash.
1 Press the { button and press the four-way controller (3).
The [Flash Mode] screen appears.
2 Use the four-way controller (45) to select r mode.
Press the 4 button to return to Capture mode.
137
5
OK
When Drive Mode is set to i or the lens aperture is not set to the s position, r appears gray and cannot be selected.
138
Changing the Built-in Flash Discharge Method
You can change the built-in flash discharge method in wireless mode.
1
2
On
Off
Discharges the built-in flash.
Discharges the built-in flash as a control flash.
Set in [16. Flash in Wireless Mode] in the [A Custom Setting] menu (p.76).
HSb (High-speed sync) is not available when the camera is set to discharge the built-in flash.
Wireless Shooting
5
Using a Combination of the Built-in Flash and an External Flash
Unit
1 Remove the external flash unit after the channel was set on the camera, and place at the desired location.
2 Set the camera flash to r mode, and pop up the built-in flash.
3 Confirm that both flashes are fully charged and then take the picture.
Using a Combination of External Flash Units
1 Set the wireless mode of the external flash directly connected to the camera to [MASTER] or [CONTROL].
MASTER
CONTROL
Discharges both the flash directly connected to the camera and the wireless flash unit.
The flash directly connected to the camera is discharged as a control flash only and does not discharge as main flash.
2 On the wireless remote flash unit, set the wireless flash mode to
[SLAVE] and set the channel to the same channel as the flash directly connected to the camera. Then, place at the desired location.
3 Confirm that both flashes are fully charged and then take the picture.
Shake Reduction is not available in Wireless mode.
139
Wireless Flash Control (P-TTL Flash Mode)
When using external flash units (AF540FGZ or AF360FGZ) for wireless shooting, the following information is exchanged between the flash units before the flash is discharged.
Press the shutter release button fully.
1 The flash unit directly connected to the camera emits a control flash (relays the flash mode of the camera).
2 The wireless remote flash unit emits a test flash (relays confirmation of subject).
3 The flash unit directly connected to the camera emits a control flash (relays flash output to the wireless remote flash unit).
* The flash unit directly connected to the camera will emit a control flash one more time after this to relay the flash duration time when
HSb (High-speed sync) is set.
4 The wireless remote flash unit discharge as main flash.
When the wireless mode of the external flash directly connected to the
camera is set to [MASTER] or [16. Flash in Wireless Mode] (p.138) is set
to [On] for the built-in flash, all the flash units will discharge simultaneously.
5
Red-Eye Reduction
As with the built-in flash, red-eye reduction is available with an external flash. This may not be available on some flashes or may have restrictions
for usage conditions. See the chart on p.134.
• The red-eye reduction feature works even when only an external flash is
• If red-eye reduction of the built-in flash is used when the external flash is set as the slave unit or with the wireless function, the preflash for red-eye reduction will trigger the external flash. Do not use red-eye reduction when using a slave unit.
140
Trailing Curtain Sync
When using the built-in flash with an external flash (AF540FGZ or
AF360FGZ) that is set to the Trailing curtain sync function, the built-in flash will also use this mode. Confirm that both flash units are fully charged before shooting.
Using the Built-in Flash with the External Flash
As shown in the illustration below, attach the Hot Shoe Adapter F
G
(optional) to the camera hot shoe and an Off-Camera Shoe Adapter F
(optional) to the bottom of the external flash, and connect these with the
Extension Cord F5P (optional). The Off-Camera Shoe Adapter F can be mounted using the tripod screw to your tripod.
Only the P-TTL auto flash can be used in combination with the built-in flash.
5 When combining with the built-in flash
Discharging Multiple Flashes
You can combine two or more external flashes (AF540FGZ, AF360FGZ or
AF200FG) or you can use two or more external flashes in combination with the built-in flash. You can use the extension cord connection terminal on the flash to connect the AF540FGZ. You can connect AF360FGZ or
AF200FG units as shown in the illustration below. Connect an external flash and the Hot Shoe Adapter F (optional) to the Off-Camera Shoe
Adapter F (optional) and then connect another Off-Camera Shoe Adapter
F with external flash using the Extension Cord F5P (optional).
Refer to the flash manual for details.
• Do not combine with accessories that have a different number of contacts such as a Hot Shoe Grip as a malfunction may occur.
• Combining with flashes from other manufacturers may cause equipment breakdown. We recommend using the AF540FGZ, AF360FGZ or AF200FG.
141
5
When combining two or more external flashes
When using multiple external flashes or an external flash with the built-in flash,
P-TTL is used for flash control.
142
Contrast-Control-Sync Flash
Combining two or more external flashes (AF540FGZ, AF360FGZ or
AF200FG) or using an external flash in combination with the built-in flash allows multiple flash photography (contrast-control-sync flash photography). This is based on the difference between the amounts of light discharged from multiple units.
• The AF200FG must be combined with the AF540FGZ or AF360FGZ.
• Do not combine with accessories that have a different number of contacts such as a Hot Shoe Grip as a malfunction may occur.
• Combining with flashes from other manufacturers may cause equipment breakdown. We recommend using PENTAX automatic flashes.
5
1 Connect the external flash to the camera indirectly. (p.140)
2 Set the sync mode for the external flash to the contrast-control-sync mode.
3 Turn the mode dial and set the exposure mode to e, b, c or a.
4 Confirm that both the external flash and built-in flash are fully charged and then take the picture.
• When using two or more external flashes and the contrast-control-sync mode is set on the external master flash unit, the flash output ratio is 2 (master unit)
: 1 (slave units). When external flash is used in combination with the built-in flash, the flash output ratio is 2 (external flash) : 1 (built-in flash).
• When using multiple external flashes or an external flash with the built-in flash, P-TTL is used for flash control.
6
Shooting Settings
This chapter describes how to set the save format for pictures taken and other settings.
Setting the Image Processing Method in Capture
Mode (Custom Image) ........................................144
Setting the File Format ......................................146
144
Setting the Image Processing Method in Capture Mode (Custom Image)
6
You can set Custom Image when the exposure mode is set to e
(Program), K (Sensitivity Priority), b (Shutter Priority), c (Aperture
Priority), a (Manual) or p (Bulb). By using Custom Image to change the
[Image Tone], you can adjust settings such as the color and contrast before shooting an image.
Select from the following six modes for Image Tone: Bright, Natural,
Portrait, Landscape, Vibrant and Monochrome. The default setting is
[Bright].
You can adjust the following items for Image Tone.
Saturation
Hue
*1
Contrast
Sharpness
*1
Filter Effect
Toning
*2
*2
Sets the color saturation. (Available settings: –4 to +4)
Sets the color. (Available settings: –4 to +4)
Sets the image contrast. (Available settings: –4 to +4)
Sets the sharpness of the image outlines. (Available settings: –4 to +4)
Changes the contrast to appear as if a B&W color filter was used. Sets the filter color. (Available settings: [None],
[Green], [Yellow], [Orange], [Red], [Magenta], [Blue], [Cyan],
[Infrared Color])
Sets the level for cold tone adjustment (– direction) and warm tone adjustment (+ direction). (Available settings:
–4 to +4)
*1 This can be set when any mode other than [Monochrome] is selected.
*2 This can be set when [Monochrome] is selected.
1
Press the { button in Capture mode.
The Fn menu appears.
Fn CUSTOM IMAGE
OK
Fn
2
Press the 4 button.
The Custom Image screen appears.
After the power is turned on, the last image taken is displayed in the background. Set the main switch to | to change the background image to the
Digital Preview image.
3
Use the four-way controller
(45) to choose the Image Tone.
OK
BW
OK
4
Use the four-way controller (23) to choose the item you want to change ([Saturation], [Hue], [Contrast],
[Sharpness]).
When Image Tone is set to [Monochrome], you can change the settings for [Filter Effect], [Toning], [Contrast], and [Sharpness].
5
Use the four-way controller (45) to change the setting.
The background image changes according to the setting.
You can visually check the saturation and hue with the radar chart.
For [Sharpness], turn the e-dial to switch between [Fine Sharpness] and
[Sharpness]. The image outlines are even thinner and sharper with [Fine
Sharpness], making it suited for capturing fine subjects such as hair.
Press the Green button to reset the setting.
6
Press the 4 button.
The camera returns to the Capture mode.
6
• In Picture mode or H (Scene) mode, you can confirm the custom image, however, the settings cannot be changed.
• When Image Tone is set to [Monochrome], the radar chart is not displayed.
145
146
Setting the File Format
Setting the JPEG Recorded Pixels
You can select the number of recorded pixels from J, P and i. The more pixels there are, the larger the picture and the bigger the file size.
The file size will also differ according to the [JPEG Quality] setting. The default setting is J 3872×2592.
Recorded Pixels
J
P i
Pixels
3872×2592
3008×2000
1824×1216
Paper Size
10"×12" / A3 paper
8"×10" / A4 paper
5"×7" / A5 paper
6
The paper sizes above are references for optimal printing by recorded pixels. The quality of the captured photo or printed picture depends on the quality level, exposure control, resolution of the printer and a variety of other factors.
You can set the JPEG recorded pixels in [JPEG Recorded Pixels] in the
When the number of recorded pixels is changed, the number of recordable images appears at the top right of the screen.
Recordable image no.
A F M o d e
A E M e t e r i n g
S e l e c t A F p o i n t
F i l e F o r m a t
JPEG Recorded Pixels
J P E G Q u a l i t y
AF.S
10
2
MENU C a n c e l OK O K
Setting the JPEG Quality Level
You can set the image quality level. The file size will also differ according to the [JPEG Rec. Pixels] setting. The default setting is C (Best).
Images will be clearer but file size will be larger.
C
D
E
Best
Better
Good Images will be grainier but file size will be smaller.
147
You can set the JPEG quality level in [JPEG Quality] in the [A Rec. Mode] menu (p.74).
When the quality level is changed, the number of recordable images at that quality level appears at the top right of the screen.
Recordable image no.
A F M o d e
A E M e t e r i n g
S e l e c t A F p o i n t
F i l e F o r m a t
J P E G R e c . P i x e l s
J P E G Q u a l i t y
MENU C a n c e l
AF.S
128
OK O K
6
148
Setting the File Format
You can set the format of image files. The default setting is JPEG.
JPEG
RAW
Captures images in JPEG format. You can change the number of recorded pixels from [JPEG Rec. Pixels] in the [A Rec. Mode] menu, and the image quality level from [JPEG Quality] in the [A Rec. Mode] menu.
The file size varies according to the settings.
RAW data is CCD output data saved without processing.
Effects such as White Balance, Custom Image and Color Space are not applied to the image but such information is saved. Use RAW Display
(p.185) or transfer to a PC, apply effects with the enclosed PENTAX
PHOTO Laboratory 3 and create JPEG image.
6
Set [File Format] in the [A Rec. Mode] menu (p.74).
When the file format is changed, the number of recordable images appears at the top right of the screen.
128
Recordable image no.
A F M o d e
A E M e t e r i n g
S e l e c t A F p o i n t
F i l e F o r m a t
J P E G R e c . P i x e l s
J P E G Q u a l i t y
MENU C a n c e l
AF.S
JPEG
RAW
RAW+
OK O K
Setting the RAW File Format
You can select PEF or DNG format in [RAW file format] in the [A Rec.
Mode] menu (p.74) when images are captured in RAW format. The default
setting is PEF format.
PEF PENTAX original RAW file format
DNG General-purpose, publicly available RAW file format designed by Adobe Systems
R e c . M o d e
R AW f i l e f o r m a t
C o l o r S p a c e
R AW b u t t o n
M e m o r y
I n p u t F o c a l L e n g t h
PEF
DNG
MENU C a n c e l OK O K
Setting the RAW Button Function
You can set the function when the | button (p.19) is pressed in
Capture mode.
The following settings are available.
Cancel each time
File Format
O (On)/P (Off)
File format selected when the | button is pressed in
Capture mode.
1
Select [| button] in the [A Rec. Mode] menu.
2
Press the four-way controller
(5).
R AW b u t t o n
C a n c e l e a c h t i m e
J P E G
R AW
R AW +
R AW +
R AW +
R AW +
MENU
3
Use the four-way controller (45) to select O (On) or P
(Off) for [Cancel each time].
When set to O (On), the recording format each time a picture is taken returns to the [File Format] setting in the [A Rec. Mode] menu. The default setting is O (On).
When [Cancel each time] is set to P (Off), the | button settings are canceled under the following conditions.
• the | button is pressed again
• the camera is turned off
• the mode dial is turned.
• a menu is displayed
• the camera is in Playback mode
4
Use the four-way controller (23) to choose a file format.
The left side is the [File Format] setting in the [A Rec. Mode] menu and the right side is the file format when the | button is pressed.
6
149
150
5
Press the four-way controller (5), and use the four-way
controller (23) to select the file format when the | button is pressed.
6
Press the 4 button.
7
Press the 3 button twice.
The camera returns to the Capture mode or Playback mode.
Setting the White Balance
6
White balance is a function for adjusting the color of an image so that white objects appear white. Set the white balance if you are not satisfied with the color balance of pictures taken with white balance set to F (Auto), or to intentionally apply a creative effect to your images. The default setting is F (Auto).
F
Auto
Automatically adjusts the white balance. (About 4000 to
8000K)
G
H
^
J
I b
K
Daylight
Shade
Cloudy
Fluorescent
Light
Tungsten
Light
Flash
Manual
For use when taking pictures in sunlight. (About 5200K)
For use when taking pictures in the shade. It reduces the bluish color tones in a picture. (About 8000K)
For use when taking pictures on cloudy days. (About
6000K)
For use when taking pictures under fluorescent lighting.
Select the type of fluorescent light, from W (white) (about
4200K), N (neutral white) (about 5000K), and D (daylight)
(about 6500K).
For use when taking pictures under light bulb or other tungsten light. It reduces the reddish color tones in a picture. (About 2850K)
For use when taking pictures using the built-in flash.
(About 5400K)
Use this to manually adjust the white balance according to the lighting so that white objects appear as a natural white.
* The color temperature (K) is an estimate. This does not indicate precise colors.
1
Press the { button in Capture mode.
The Fn menu appears.
Fn CUSTOM IMAGE
OK
Fn
2
Press the four-way controller
(4).
The [White Balance] screen appears.
OK
3
Press the four-way controller (23) and set.
Set the main switch to | to display Digital Preview with the set White
Balance.
Fine-tuning White Balance is easier with Digital Preview.
4
Press the 4 button.
The camera is ready to take a picture with the set White Balance.
• White balance cannot be adjusted in Picture mode and
• Refer to p.152 for manual adjustment method.
• Preview is Digital Preview, regardless of the [18. Preview Method] setting in the [A Custom Setting] menu.
• Because the light source changes when the flash discharges, you can set the white balance for when the flash discharges. Select [Flash] or [Unchanged]
in [17. WB when using flash] in the [A Custom Setting] menu (p.76).
6
151
152
Color Temperature
The color of light shifts towards blue as the color temperature rises, and towards red as the color temperature falls. Color temperature describes this change in light color in terms of absolute temperature (K: Kelvin).
This camera is capable of setting the white balance to enable taking pictures with natural coloring under a variety of lighting conditions.
Red tint Blue tint
2000 3000 4000 5000 6000 8000 10000 12000 [ K ]
6
Adjusting the White Balance Manually
You can adjust the white balance depending on the light source when taking pictures. With Manual White Balance, the camera can store delicate shades that cannot be precisely adjusted with the white balance preset values provided in the camera. This provides the optimum white balance for your surroundings.
1
Set the mode dial to e, K, b, c, or a.
2
Press the { button.
The Fn menu appears.
3
Press the four-way controller (4).
The [White Balance] screen appears.
4
Use the four-way controller (3)
to select K (Manual).
SHUTTER OK
5
Under the light to measure the white balance, fully display a white sheet of paper in the viewfinder or select a white area as the subject.
6
Press the shutter release button fully.
Slide the focus mode lever to \ when the shutter cannot be released.
The screen to select the measuring range is displayed.
OK
7
Use the e-dial to select the entire screen or spot area for the measuring range.
8
When a spot area is selected, use
the four-way controller (2345) to move the frame to the area you want to measure.
6
OK
9
Press the 4 button.
The camera returns to the [White
Balance] screen.
Tune using steps in “Fine-Tuning the
White Balance” if fine-tuning is
SHUTTER OK
153
154
10
Press the 4 button.
The camera is ready to take a picture with the set White Balance.
• No image is recorded when the shutter release button is pressed to adjust the white balance.
• [NG] appears when measuring is unsuccessful. Press the 4 button while displayed to return to the [Adjust White Balance] screen for remeasuring.
• If the picture is extremely overexposed or underexposed, white balance may not be adjusted. In this case, adjust appropriate exposure and adjust the white balance.
Fine-Tuning the White Balance
You can fine tune the White Balance setting.
6
1
Set [7. Adjust White Balance] in the [A Custom Setting] menu to [On].
2
Perform desired settings in Steps 1 to 3 of “Setting the
White Balance”.
3
Press the four-way controller (5).
The [Adjust White Balance] screen appears.
4
Use the four-way controller
(2345) to fine tune White
Balance.
Seven levels and 225 patterns are available on the G-M and B-A axes.
OK MENU
GM compensation
BA compensation
Adjusts the tone of the colors between green and magenta.
Adjusts the tone of the colors between blue and amber.
Press the Green button to reset the GM compensation and BA compensation to [0].
23
45
5
Press the 4 button.
The camera returns to the [White Balance] screen.
6
Press the 4 button.
The camera is ready to take a picture with the set White Balance.
• If [7. Adjust White Balance] in the [A Custom Setting] menu is set to [Off] after
White Balance is adjusted, the adjusted values become invalid. Set [7. Adjust
White Balance] to [On] again to enable the values used previously.
• White Balance can also be manually measured in the [Adjust White Balance] screen.
155
Setting the Color Space
You can set the color space to use. The default setting is [sRGB].
1
2 sRGB Sets to sRGB color space.
AdobeRGB Sets to AdobeRGB color space.
Set [Color Space] in the [A Rec. Mode] menu (p.74).
R e c . M o d e
R AW f i l e f o r m a t
C o l o r S p a c e
R AW b u t t o n
M e m o r y
I n p u t F o c a l L e n g t h
PEF sRGB
AdobeRGB
MENU C a n c e l OK O K
File names differ depending on the color space setting as shown below.
For sRGB : IMGPxxxx.JPG
For AdobeRGB : _IGPxxxx.JPG
[xxxx] indicates the file number. This is displayed as a four-digit sequential
6
156
Color Space
Color ranges for various input/output devices, such as digital cameras, monitors, and printers, differ.
This color range is called the Color Space.
To recreate different color spaces in different devices, standard color spaces have been proposed. This camera supports sRGB and
AdobeRGB.
sRGB is mainly used for devices such as a PC.
AdobeRGB covers a wider area than sRGB and is used for occupational uses such as industrial printing.
An image created in AdobeRGB may appear lighter than an image created in sRGB when output from an sRGB compatible device.
6
7
Playback Functions
This chapter describes how to use the various playback functions in Playback mode.
How to Operate the Menus During Playback ...158
Rotating Images .................................................160
Enlarging Playback Images ...............................161
Displaying Multiple Images ...............................163
Displaying a Folder ............................................165
Comparing Images .............................................166
Slideshow ............................................................167
Changing Playback Display Method .................170
Deleting Multiple Images ...................................173
Protecting Images from Deletion (Protect) ......177
Connecting the Camera to AV Equipment .......179
158
How to Operate the Menus During
Playback
Press the 3 button in Playback mode. The [Q Playback] menu appears.
[Q Playback] Menu Setting Items
Perform settings related to playing back images in the [Q Playback] menu.
Item
Playback display
Instant Review
Digital Preview
Slideshow
Function
Sets whether to display the Bright/Dark area warning in Playback mode and also sets the initial magnification when enlarging images.
Sets how long to display Instant Review and whether to display histogram and Bright/Dark area warning.
Sets whether to display Bright/Dark area warning and histogram during Digital Preview.
Plays back recorded images one after another.
Page
7
[A Custom Setting] Menu Setting Items
Set custom functions to fully use the functions of a SLR camera with the Custom
Function Menu. The default setting does not change Custom Function.
The [A Custom Setting] menu settings are activated when [Setting], the first item, is O (On).
Setting
Item
20. Saving rotation info
21. Auto Image
Rotation
Reset Custom
Function
Function
Sets to change Custom Function.
Sets whether to save rotation information when shooting.
Sets to automatically rotate images when playing back.
Resets all the settings in the [A Custom Setting] menu to the defaults.
Page
–
–
–
159
Playback Fn Menu Setting Items
Press the { button during playback. The Fn menu appears.
Fn
OK
Fn
Press the four-way controller (2345) or the 4 button to set the operation.
Key or
Button
2
3
4
5
4
Item Function Page
DPOF Settings Sets the DPOF settings.
RAW Display
Digital Filter
Slideshow
Image
Comparison
Converts RAW images to JPEG format. p.185
Changes the color tone of captured images, adds softening and slimming effects, or adjusts the brightness.
Plays back recorded images one after another.
You can display two images side-byside.
7
• RAW Display (3) cannot be selected when displaying a JPEG image.
• DPOF Settings (2) and Digital Filter (4) cannot be selected when displaying a RAW image.
160
Rotating Images
The x features a function that uses a sensor to rotate and correct the direction of the image when an image is captured.
You can also rotate the captured image 90° counterclockwise at a time with the steps below.
1
Press the Q button.
Use the four-way controller (45) to display the image you want to rotate.
2
Press the four-way controller (3).
The image is rotated 90° counterclockwise each time the button is pressed.
3 3
OK
7
3
Press the 4 button.
Image rotation information is saved.
OK
You cannot save image rotation information for a protected image or an image
taken with [21. Auto Image Rotation] in the [A Custom Setting] menu (p.158)
set to Off.
Enlarging Playback Images
Images can be magnified up to 16 times in playback mode.
161
1
Press the Q button and use the
four-way controller (45) to select an image.
7
162
2
Turn the e-dial to the right
(toward y).
Image enlarges at each calibration (1.2 times* to 16 times).
7
Fn
Operations available during Enlarged view
Four-way controller
(2345) e-dial (toward right)/ mc button e-dial (toward left)/
L (Z) button
4 button
M button
{ button
*2
Moves area to enlarge
Enlarges image (up to 16 times)
Reduces image (up to 1.2 times
*1
)
Returns to the original size
Switches information display On/Off
Retains magnification and magnification area and shows image comparison
*1 The default setting for the first click (minimum magnification) on the e-dial (toward
right) is 1.2 times. You can change this in [Playback display] in [Q Playback]
*2 During Instant Review, Enlarged view is ended and the camera returns to the
Shooting Fn menu. During Digital Preview, the preview image can be saved as a
JPEG image.
• You can enlarge the image by following the same procedure during Instant
Review (p.59) or Digital Preview (p.113).
• The initial full display of vertical images is displayed with a magnification of
0.75 times that of horizontal images, therefore, magnification at the first click starts at 1.0 times.
Displaying Multiple Images
You can display 4, 9 or 16 images on the monitor at the same time.
163
The default setting is 9-image display. The number of images can be changed but 9-image display is explained here.
1
Press the Q button.
7
2
Turn the e-dial to the left (toward f ).
The multi-image display screen appears.
Up to nine thumbnail images will be displayed at once. Use the four-way controller (2345) to select an image. A scroll bar appears at the right of the screen.
With an image selected in the bottom row, pressing the four-way controller (3) displays the next nine images.
[?] appears for an image that cannot be displayed.
Frame
S e l e c t & D e l e t e 100-0046
Scroll bar
164
3
Turn the e-dial to the right
(towards y) or press the 4 button.
A full screen display of the selected image appears.
Selecting the Number of Images to Display
1
In the multi-image display
screen, press the { button.
The multi-image options screen appears.
OK
Fn
7 2
Use the four-way controller (425) to select the number of images to display at once.
4
2
5
4 images
9 images
16 images
The camera returns to the multi-image display screen.
Displaying a Folder
You can display the contents of folders in the multi-image display screen.
1
Turn the e-dial to the left (toward f ) in the multi-image display screen.
165
D e l e t e
2
Use the four-way controller (2345) to select the folder
you want to display and press the 4 button.
The images in the folder are displayed according to the number selected in the multi-image options screen.
Press the i button to delete all images in the selected folder. (p.176)
7
166
Comparing Images
You can display two images side-by-side.
1
Press the { button in Playback
mode, and then press the 4 button.
Two images are displayed side-by-side.
The same image is displayed on the left and right. Turn the e-dial to select the images to compare.
You can also press the { button in
Enlarged view to display image comparison.
Fn OK
7
Operations available during image comparison
4 button
Four-way controller
(2345)
Green button e-dial
M button i button
The selection frame changes to both images, left image, and right image each time the button is pressed.
Moves area to enlarge. When the selection frame is selecting both images, you can operate both images at the same time.
Returns the enlarged display position to the center.
When the selection frame is selecting the left or right image, the previous/next image is displayed.
When the selection frame is selecting both images, you can enlarge or reduce both images simultaneously in the same magnification.
Switches information display On/Off.
When the selection frame is selecting the left or right image, the selected image is deleted.
2
Press the { button.
The camera returns to the normal Playback mode.
Slideshow
You can play back all images recorded on your SD Memory Card successively. To start continuous playback, use the menu screen displayed on the monitor.
167
1
Press the Q button and use the four-way controller (45) to select an image to be displayed first.
2
Press the { button.
The Fn menu appears.
Fn
7
OK
Fn
168
3
Press the four-way controller
(5).
Start screen is displayed and slideshow begins.
OK
7
Operations available during a slideshow
4 button
Four-way controller (4)
Four-way controller (5)
Four-way controller (3)
Operations available when paused
Pause
Shows previous image
Shows next image
Stop
4 button
Four-way controller (4)
Four-way controller (5)
Four-way controller (3)
Resumes playback (Restart)
Shows previous image
Shows next image
Stop
4
Stop the slideshow.
Slideshow ends when one of the following is performed during playback or when paused.
• Four-way controller (3) is pressed
*1
• Q button is pressed
*1
• 3 button is pressed
*1
• Shutter release button is pressed halfway or fully
*2
• Main switch is turned to the | position
*2
• Mode dial is turned
*2
*1 After slideshow ends, the camera switches to normal Playback mode.
*2 After slideshow ends, the camera switches to Capture mode.
Set the display time for slideshow in the [Q Playback] menu. Alternatively,
start the slideshow from the [Q Playback] menu. (p.169)
Setting the Slideshow Display Interval
Set image display interval for slideshow to [3 sec], [5 sec], [10 sec] or [30 sec]. The default setting is [3 sec].
Set whether or not to play back repeatedly. The default setting is [Off].
1
Select [Slideshow] in the
[Q Playback] menu.
P l a y b a c k
P l a y b a c k d i s p l a y
I n s t a n t R e v i e w
D i g i t a l P r e v i e w
S l i d e s h o w
1s e c
3sec
169
OK S t a r t MENU E x i t
2
Press the four-way controller (5).
3
Press the four-way controller
(5), use the four-way controller
(23) to select the image display
interval, and then press the 4 button.
S l i d e s h o w
I n t e r v a l
R e p e a t P l a y b a c k
3s e c
5s e c
10s e c
3 0 s e c
MENU C a n c e l OK O K
4
Use the four-way controller (3) to select [Repeat Playback].
5
Use the four-way controller
(45) to select O (On) or P (Off).
Slideshow
Interval
Repeat Playback
3sec
7
MENU
6
Press the 3 button.
The camera returns to the [Q Playback] menu.
Press the 4 button to start slideshow.
170
Changing Playback Display Method
The camera switches display information when you press the M button in the Playback screen.
Standard Captured image and indicators are displayed.
Histogram display Images and histogram (Brightness/RGB) are displayed.
Detailed information display
No info. display
Shooting information appears with a small image in the upper left.
Only captured images are displayed.
• Refer to p.25 for various display information details.
• The information that is shown first during playback is the same as that of the last playback in the previous session. The [Standard] screen can always be
displayed first by setting [Memory] (p.217) in the [A Rec. Mode] menu.
7
Using the Histogram
A histogram shows the brightness distribution of an image. The horizontal axis represents brightness (dark at the left and bright at the right) and the vertical axis represents the number of pixels.
The x features two histogram displays. The “Brightness histogram” shows the distribution of brightness
(Dark) ←Brightness→
Dark portions Bright portions and the “RGB histogram” shows the distribution of color intensity.
1
(Bright)
The shape of the histogram before and after shooting tells you whether the brightness and contrast are correct or not, and lets you decide if you need to use EV compensation and take the picture again.
1
Adjusting the Exposure (p.100)
Understanding Brightness
If the brightness is correct, the graph peaks in the middle. If the image is too dark, the peak is on the left side, and if it is too bright, the peak is on the right side.
171
Dark image Correct image Bright image
When the image is too dark, the part to the left is cut off (dark portions with no detail) and when the image is too bright, the part to the right is cut off
(bright portions with no detail).
Bright portions blink red on the monitor and dark portions blink yellow when [Bright/Dark area] is On.
1
1
Setting the Display for Instant Review and Digital Preview (p.211)
Understanding Contrast
The graph peaks gradually in the middle for images in which contrast is balanced. The graph peaks on both sides but sinks in the middle for images with a large difference in contrast and low amounts of mid-level brightness.
Understanding Color Balance
Distribution of color intensity is displayed for each color in the RGB histogram. The right side of the graphs look similar for images that have
White Balance adjusted well. If only one color is lopsided to the left, that color is too intense.
1
Setting the White Balance (p.150)
7
172
Setting the Playback Display
You can set whether or not to display the Bright/Dark area warning in
Playback mode and set the initial magnification when enlarging images.
1
Select [Playback display] in the [Q Playback] menu.
2
Press the four-way controller
(5).
P l a y b a c k d i s p l a y
B r i g h t / D a r k a r e a
Q u i c k Z o o m O f f
7
MENU
3
Use the four-way controller (45) to select O (On) or P
(Off).
4
Use the four-way controller (3) to select [Quick Zoom].
5
Press the four-way controller (5) and use the four-way controller
(23) to select the magnification.
Playback display
Bright/Dark area
Quick Zoom
Select from [Off], [×2], [×4], [×8] or [×16].
Off
×2
×4
×8
×16
OK MENU Cancel
6
Press the 4 button.
7
Press the 3 button twice.
The camera is ready to take or play back images.
Deleting Multiple Images
Deleting All Images
You can delete all saved images at once.
Deleted images cannot be restored.
A confirmation screen appears when there are protected images.
1
Press the Q button.
The single-image playback screen appears.
2
Press the i button twice.
The Delete All screen appears.
173
7
3
Use the four-way controller
(23) to select [Delete All].
MENU
D e l e t e A l l
OK
174
4
Press the 4 button.
All images are deleted.
A confirmation screen appears when there are protected images. Press the four-way controller (23) to select
[Delete All] or [Leave All] and press the
4 button.
D e l e t e A l l
OK
Deleting Selected Images (from Multi-image
Display)
You can delete multiple images from the multi-image display at once.
Deleted images cannot be restored.
7
• Protected images cannot be deleted.
• You can select up to 100 images at a time.
1
Press the Q button.
The single-image playback screen appears.
2
Turn the e-dial to the left (toward f ).
The multi-image display screen appears.
S e l e c t & D e l e t e 100-0046
3
Press the i button.
9 appears on the images.
4
Use the four-way controller
(2345) to move to the images
to delete and press the 4 button.
Image is selected and O appears.
Protected images cannot be selected.
5
Press the i button.
The Delete confirmation screen appears.
6
Use the four-way controller
(23) to select [Select&Delete].
MENU D e l e t e OK
7
MENU
S e l e c t & D e l e t e
OK
7
Press the 4 button.
The selected images are deleted.
175
176
Deleting a Folder
You can delete all images in a selected folder.
1
Turn the e-dial to the left (toward f ) in Playback mode to display the folders.
7
D e l e t e
2
Press the four-way controller
(2345) to select the folder to
delete and press the i button.
The Delete Folder confirmation screen appears.
D e l e t e
OK MENU
3
Use the four-way controller (23) to select [Delete].
The folder and all images in the folder are deleted.
A confirmation screen appears when there are protected images. Press the four-way controller (23) to select [Delete All] or [Leave All] and press the 4 button.
Protecting Images from Deletion
(Protect)
You can protect images from being accidentally deleted.
Even protected images are deleted if the inserted SD Memory Card is formatted.
1
Press the Q button and use the four-way controller (45) to select an image to protect.
Select an image in the single-image playback screen.
2
Press the Z button.
The Protect screen appears.
177
3
Use the four-way controller
(23) to select [Protect].
P r o t e c t
4
Press the 4 button.
The selected image is protected.
• Select [Unprotect] in Step 3 to cancel the Protect setting.
• The Y icon is displayed when playing back protected images. (p.25)
OK
7
178
Protecting All Images
1
Press the Q button.
The single-image playback screen appears.
2
Press the Z button twice.
The Protect all images screen appears.
7
3
Press the four-way controller
(23) to select [Protect] and
press the 4 button.
All images saved in the SD Memory Card are protected.
MENU
P r o t e c t
OK
Select [Unprotect] in Step 3 to cancel the Protect setting on all of the images.
Connecting the Camera to AV
Equipment
By using the provided video cable (I-VC28), you can play back images using a TV or other device with a video IN jack as your monitor. Make sure that both the TV and the camera are turned off before connecting the cable.
1 Selecting the Video Output Format (p.214)
179
1
Open the terminal cover, face the arrow on the provided
video cable toward the S mark on the camera, and connect the video cable to the USB/Video terminal.
2
Connect the other end of the video cable to the video IN jack on the AV device.
3
Turn the AV device and camera on.
7
• If you intend to use the camera continuously for a long period, use of the AC
adapter D-AC76 (optional) is recommended. (p.40)
• For AV equipment with multiple video IN jacks (such as TVs), check the operating manual of the AV device, and select the video IN jack to which the camera is connected.
• Depending on the country or region, images may fail to be played back if the video output format is set different from the one in use there. If this happens,
change the video output format setting. (p.214)
• The camera monitor turns off while the camera is connected to the AV device.
180
Memo
8
Processing Images
This chapter describes how to process pictures taken and edit RAW images.
Processing Images with Digital Filters .............182
Editing RAW Images ..........................................185
182
Processing Images with Digital
Filters
You can edit shot images using digital filters. Processed images are saved under a different name.
RAW images cannot be processed using the digital filter.
8
1
Select an image in Playback mode.
2
Press the { button.
The Fn menu appears.
Fn
OK
Fn
3
Press the four-way controller
(4).
The screen for selecting the filter appears.
MENU
4
Use the four-way controller (23) to select a filter.
Select a filter and preview the effects on the screen.
5
Adjust with e-dial and the four-way controller (45).
OK
HDR
183
HDR HDR
MENU
Color Filter
OK MENU
Slim Filter
OK
Filter name
B&W
Sepia
Color
Function
Converts to a black and white image.
Adds a vintage touch to photos by converting them to sepia color.
e-dial
—
—
Adds a color filter to the image.
Select from 18 filters (6 colors × 3 tones).
Density of each color
(3 levels)
Four-way controller
45
—
—
Red/
Magenta/
Cyan/Blue/
Green/
Yellow/
Soft
Illustration
Creates a soft image by lightly fading the entire image. Select from three levels.
Creates an image that looks as though it was drawn with a pencil.
Soft level
(3 levels)
—
—
—
8
184
Filter name Function e-dial
HDR
Slim
Brightness
Creates an image that looks as though it is a high dynamic range image. Select from three levels.
Changes the horizontal and vertical ratio of images. Adjust height or width up to two times the original size.
Changes the brightness of images. Adjust in a range of ±8 levels.
HDR level
(3 levels)
Left: Wide
Right: Slim
Left: Dark
Right: Light
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller
(23) to select [Save as].
Press the 3 button to return to the previous screen. Select [Cancel] and press the 4 button to return to the single-image playback screen.
S a v e a s
MENU
Four-way controller
45
—
—
—
OK
8
8
Press the 4 button.
The filtered image is saved under a different name.
Editing RAW Images
You can convert captured RAW files into JPEG files.
Only RAW files captured with this camera can be edited. RAW files and JPEG files captured with other cameras cannot be edited on this camera.
Editing a RAW Image
1
In Playback mode, select an image to edit.
2
Press the { button.
The Fn menu appears.
Fn
OK
Fn
3
Press the four-way controller
(3).
Use the four-way controller (45) to display another RAW image.
4
Press the 4 button.
The parameters recorded in the image file appear.
To specify the parameters, see
“Specifying the Parameters” (p.186).
MENU
MENU OK
OK
10
8
185
186
5
Press the 4 button.
The save confirmation screen appears.
S a v e a s
OK
6
Use the four-way controller (23) to select [Save as].
Press the 3 button to return to the previous screen. Select [Cancel] and press the 4 button to return to the single-image playback screen.
7
Press the 4 button.
The edited image is saved under a different name.
Specifying the Parameters
8
Specifies the parameters for editing RAW images.
1
Press the four-way controller
(23) in Step 4 of p.185 to choose
the parameter you want to change.
10
MENU OK
The following parameters can be changed.
Recorded Pixels
Quality Level
White Balance
Sensitivity
Image Tone
Saturation
*1
Hue
*1
Contrast
Sharpness
Filter Effect
*2
Toning
*2
J (3872×2592)/P (3008×2000)/ i (1824×1216)
C (Best)/D (Better)/E (Good)
F (Auto), G (Daylight), H (Shade), ^
(Cloudy), JN (Daylight white fluorescent lights),
J W (White light fluorescent lights), JD (Daylight colors fluorescent lights), I (Tungsten Light), E
(Flash), K (Manual)
–2.0~+2.0
Bright/Natural/Portrait/Landscape/Vibrant/
Monochrome
Available settings: –4 to +4
Available settings: –4 to +4
Available settings: –4 to +4
Available settings: –4 to +4
None/Green/Yellow/Orange/Red/Magenta/Blue/
Cyan/Infrared Color
Available settings: –4 to +4
*1 This can be set when any mode other than [Monochrome] is selected.
*2 This can be set when [Monochrome] is selected.
2
Use the four-way controller (45) to change the parameter.
To make settings for White Balance and Custom Image, see “Adjusting
the White Balance” (p.150) and “Setting the Image Processing Method in
Capture Mode (Custom Image)” (p.144).
187
8
• Measured white balance values stored in the camera are applied with Manual
White Balance. To re-measure the white balance, be sure to measure the white balance using the Shooting Fn menu beforehand. Refer to “Adjusting
the White Balance Manually” (p.152).
• For [Sharpness], turn the e-dial to switch between [Fine Sharpness] and
[Sharpness]. The image outlines are even thinner and sharper with [Fine
Sharpness], making it suited for capturing fine subjects such as hair.
188
3
Press the 4 button.
The save confirmation screen appears.
4
Use the four-way controller (23) to select [Save as] and
press the 4 button.
The RAW image is edited and saved as a new image.
8
9
Printing from the Camera
This chapter describes how to make the printing settings.
Setting the Printing Service (DPOF) .................190
Printing Using PictBridge ..................................193
190
Setting the Printing Service (DPOF)
You can order conventional photograph prints by taking the SD Memory
Card with recorded images to a store for printing.
DPOF (Digital Print Order Format) settings allow you to specify the number of copies and to imprint the date.
• DPOF settings cannot be applied to RAW images.
• You can make DPOF settings for up to 999 images.
Printing Single Images
Set the following items for each image.
Copies Selects the number of copies. You can print up to 99 copies.
Date Specifies whether you want the date inserted on the print or not.
9
1
Press the Q button and use the four-way controller (45) to select an image.
Select the image to set DPOF settings for in the single-image playback screen.
2
Press the { button.
The Fn menu appears.
Fn
OK
Fn
3
Press the four-way controller (2).
The DPOF screen appears.
If DPOF settings have already been made for an image, the previous number of prints and date setting (O (On) or
P (Off)) will be displayed.
Fn
C o p i e s
D a t e
00
OK
4
Use the four-way controller (45) to choose the number of
copies and press the four-way controller (3).
The frame moves to [Date].
5
Use the four-way controller
(45) to choose whether to
insert the date (O) or not (P).
O : The date will be printed.
P : The date will not be printed.
You can select the next or previous image by turning the e-dial. Repeat Steps
4 and 5 to set multiple images (up to 999).
Fn
C o p i e s
D a t e
01
OK
6
Press the 4 button.
The edited DPOF settings for all images are saved and the camera returns to the single-image playback screen.
191
Depending on the printer or printing equipment at the photo processing lab, the date may not be imprinted on the pictures even if the DPOF setting was made.
• To cancel DPOF settings, set the number of copies to [00] in Step 4 and press the 4 button.
• Press the 3 button while setting to cancel editing of all images.
9
Settings for All Images
1
Press the { button in Playback mode.
The Fn menu appears.
Fn
OK
Fn
192
2
Press the four-way controller
(2).
The DPOF screen appears.
Fn
C o p i e s
D a t e
00
OK
3
Press the { button.
The screen for making DPOF settings for all images appears.
00 C o p i e s
D a t e
OK MENU
4
Use the four-way controller (45) to choose the number of
copies and whether to insert the date (O) or not (P).
Refer to Steps 4 and 5 of “Printing Single Images” (p.191) for details of
how to make the settings.
5
Press the 4 button.
The DPOF settings for all images are saved and the camera returns to the single-image playback screen.
9
The number of copies specified in settings for all images applies to all the images. Before printing, check that the number is correct.
Settings for single images are canceled when settings are made for all images.
Printing Using PictBridge
193
This function lets you print images directly from the camera without using a PC (direct printing).
Connect the camera and PictBridge compatible printer with the included
USB cable (I-USB17) to print directly.
Select the images you want to print, the number of copies and whether to insert the date or not on the camera after connecting to the printer.
Direct printing is performed in the following steps.
Set Transfer mode on camera to [PictBridge] (p.194)
¶
Connect the camera to the printer (p.195)
¶
Set the printing options
Print with DPOF settings (p.199)
• Use of the AC adapter D-AC76 (optional) is recommended when connecting the camera to a printer. The printer may not work properly or the image data may be lost if the battery set runs out of power while the camera is connected to the printer.
• Do not disconnect the USB cable during data transfer.
• Depending on the type of printer, not all the settings made on the camera
(such as print settings and DPOF settings) may be valid.
• A printing error may occur if the selected number of copies exceeds 500.
• Printing an index of images, where multiple images appear on a single sheet, may not be possible unless the printer supports index printing. For index prints, you may need to use a PC.
• RAW images cannot be printed directly from the camera. Use [RAW display]
(p.185) to convert to a JPEG image or transfer to a PC and use PENTAX
PHOTO Browser 3 to print RAW images.
• See the “PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3
Operating Manual” when connecting to a PC.
9
194
Setting Transfer Mode
9
1
Press the 3 button.
The [A Rec. Mode] menu or [Q Playback] menu appears.
2
Use the four-way controller
(45) to select the [R Set-up] menu.
S e t - u p
F o r m a t
B e e p
D a t e A d j u s t
Wo r l d Ti m e
L a n g u a g e
Te x t S i z e
MENU E x i t
3
Use the four-way controller (23) to select [USB
Connection].
E n g l i s h
S t d .
4
Press the four-way controller (5).
A pop-up menu appears.
5
Use the four-way controller (23) to select [PictBridge].
S e t - u p
G u i d e d i s p l a y
B r i g h t n e s s L e v e l
Vi d e o O u t
U S B C o n n e c t i o n
A u t o P o w e r O f f
F o l d e r N a m e
MENU C a n c e l
3s e c
0
NTSC
P C
PictBridge
D a t e
OK O K
6
Press the 4 button.
The setting is changed.
7
Press the 3 button.
Connecting the Camera to the Printer
1
Turn off the camera.
2
Face the arrow on the provided USB cable toward the S mark on the camera, and connect the camera and
PictBridge compatible printer.
The PictBridge logo is displayed on PictBridge compatible printers.
195
3
Turn the printer on.
4
After the printer start-up, turn the camera on.
The PictBridge menu appears.
S i n g l e I m a g e
A l l I m a g e s
D P O F A U TO P R I N T
OK
PictBridge menu is not displayed if [USB Connection] is set to [PC].
9
196
Printing Single Images
1
Use the four-way controller
(23) to select [Single Image] on the PictBridge menu.
S i n g l e I m a g e
A l l I m a g e s
D P O F A U TO P R I N T
OK
2
Press the 4 button.
The Print single image screen appears.
3
Use the four-way controller
(45) to choose an image to print.
9
MENU
Fn
OK
4
Use the four-way controller (23) to choose the number of copies.
You can print up to 99 copies.
5
Use the { button to choose whether to insert the date (O) or not (P).
O : The date will be printed.
P : The date will not be printed.
6
Press the 4 button.
The print settings confirmation screen appears.
Proceed to Step 12 to print the images using the default setting.
To change the print settings, go to Step 7.
Fn
MENU
S e t t i n g
S e t t i n g
_Setting
_Setting
OK
7
Press the { button.
The screen for changing print settings appears.
P i c t B r i d g e
P a p e r S i z e
P a p e r Ty p e
Q u a l i t y
B o r d e r S t a t u s
_Setting
_Setting
_Setting
_Setting
MENU
8
Select [Paper Size] and press the four-way controller (5).
The [Paper Size] screen appears.
9
Use the four-way controller
(2345) to choose the paper size.
You can only choose a size that is supported by your printer.
When [_ Setting] is selected, images are printed according to the printer settings.
P a p e r S i z e
_Setting
C a r d
L
1 0 0 × 1 5 0
P o s t c a r d
4 ″×6″
MENU C a n c e l
2 L
8
″×10″
A 4
L e t t e r
11
″×17″
A 3
OK O K
10
Press the 4 button.
11
Repeat Steps 8 to 10 to set [Paper Type], [Quality] and
[Border Status].
The print settings change screen appears after each item has been set.
When [_ Setting] is selected for these print settings, images are printed according to the printer settings.
[Paper Type] with more Es supports higher quality paper.
[Quality] with more Es indicates higher print quality.
12
Press the 3 button.
The camera returns to the print settings confirmation screen in Step 6.
13
Press the 4 button.
The image is printed according to the settings.
Press the 3 button to cancel printing.
9
197
198
Printing All Images
9
1
Use the four-way controller
(23) to select [All Images] on the PictBridge menu.
S i n g l e I m a g e
A l l I m a g e s
D P O F A U TO P R I N T
OK
2
Press the 4 button.
The Print all images screen appears.
3
Choose the number of copies and whether to imprint the date or not.
The number of copies and the date setting that you choose apply to all of the images.
Refer to Steps 4 and 5 of “Printing Single
Images” (p.196) for details on how to
make the settings.
MENU
Fn
OK
Use the four-way controller (45) to check the images set to be printed.
4
Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 to 11 of “Printing Single Images” (p.197) for details on
how to change the settings.
5
Press the 4 button on the print settings confirmation screen.
All the images are printed according to the settings.
Press the 3 button to cancel printing.
Printing Images Using the DPOF Settings
1
Use the four-way controller (23) to select [DPOF
AUTOPRINT] on the PictBridge menu.
2
Press the 4 button.
The Print w/DPOF settings screen appears.
Use the four-way controller (45) to check the number of copies for each image, whether the date is imprinted or not, and total number of copies.
MENU OK
3
Press the 4 button.
The print settings confirmation screen appears.
Refer to Steps 7 to 11 of “Printing Single Images” (p.197) for details on
how to change the settings.
4
Press the 4 button on the print settings confirmation screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.
199
9
Disconnecting the USB Cable
Disconnect the USB cable from the camera and printer when you have finished printing.
1
Turn off the camera.
2
Disconnect the USB cable from the camera and printer.
200
Memo
10
Camera Settings
This chapter describes how to change the camera settings.
How to Operate the [R Set-up] Menu ...............202
Formatting the SD Memory Card ......................203
Setting the Beep Setting, Date and Time, and
Display Language ...............................................204
Adjusting the Monitor and the Menu Display
..............................................................................210
Setting the Image Folder Naming Convention
..............................................................................213
Selecting the Video Output Format and Power
Settings ...............................................................214
Using Pixel Mapping ..........................................216
Selecting Capture Mode Settings to Save in the
Camera ................................................................217
202
How to Operate the [R Set-up] Menu
Press the 3 button and use the four-way controller (45) to display the [R Set-up] menu.
[R Set-up] Menu Setting Items
Perform various settings related to the camera in the [R Set-up] menu.
10
Format
Beep
Item
Date Adjust
World Time
Language/
Text Size
Guide display
Brightness Level
Video Out
USB Connection*
Auto Power Off
Folder Name
Select battery
Pixel Mapping
Dust Alert
Dust Removal
Sensor Cleaning
Function
Formats the SD Memory Card.
Switches the beep tone on/off.
Sets the date format and time.
Sets display of local date and time of a specified city in addition to the present location on the monitor when traveling overseas.
Changes the language in which menus and messages appear.
Sets the size of the text selected in the menus.
Sets to display indicators in the monitor.
Changes the brightness of the monitor.
Sets the output format to the TV monitor.
Sets the USB cable connection (PC or printer).
Sets the time to turn off automatically.
Sets the method used to assign folder names for storing images.
Sets battery priority for when the optional Battery
Grip D-BG3 is attached.
Maps out and corrects for any defective pixels in the CCD.
Detects dust adhering to the CCD.
Cleans the CCD by shaking it.
Locks the mirror in the up position for cleaning the
CCD.
Resets all settings.
Page
Reset
* Refer to p.11 of the “PENTAX PHOTO Browser 3/PENTAX PHOTO Laboratory 3
Operating Manual” for details on connecting the camera to a PC.
Formatting the SD Memory Card
203
Use this camera to format (initialize) an SD Memory Card that is unused or has been used on other cameras or digital devices.
Formatting will delete all the data on the SD Memory Card.
• Do not open the card cover while formatting SD Memory Card. The card may be damaged beyond use.
• Formatting will delete all data, either protected or unprotected. Be aware.
1
Select [Format] in the [R Set-up] menu.
2
Press the four-way controller (5).
The [Format] screen appears.
3
Use the four-way controller
(23) to select [Format].
F o r m a t
A l l d a t a d e l e t e d
F o r m a t
C a n c e l
OK O K
4
Press the 4 button.
Formatting starts.
When formatting is completed, the monitor turns off and the camera is ready to take pictures.
10
204
Setting the Beep Setting, Date and
Time, and Display Language
Turning the Beep On and Off
You can turn the camera operation beep on or off. The default setting is all
O (On).
There are five items that you can set: In-focus, AE Lock, | button, Selftimer and Remote Control.
10
1
Select [Beep] in the [R Set-up] menu.
S e t - u p
F o r m a t
B e e p
D a t e A d j u s t
Wo r l d Ti m e
L a n g u a g e
Te x t S i z e
MENU E x i t
E n g l i s h
S t d .
2
Press the four-way controller
(5).
The [Beep] screen appears.
B e e p
S e t t i n g
I n - f o c u s
AE-L
R AW
S e l f - t i m e r
R e m o t e C o n t r o l
MENU
3
Select an item and use the four-way controller (45) to
select On (O) or Off (P).
You can turn all the beeps off by selecting [Setting] and using the fourway controller (45) to select Off (P).
4
Press the 3 button twice.
The camera is ready to take a picture.
Changing the Date and Time and the Display
Style
You can change the initial date and time settings. You can also set the display style. Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd]. Choose
[12h] (12 hour) or [24h] (24 hour) for time display method.
Set in [Date Adjust] in the [R Set-up] menu (p.202).
1 Setting the Date and Time (p.52)
D a t e A d j u s t
D a t e S t y l e m m / d d / y y 24h
D a t e
Ti m e
0 1 / 0 1
00 : 00
/ 2 0 0 8
MENU C a n c e l OK O K
205
10
206
Setting the World Time
The date and time selected in “Initial Settings” (p.49) serve as the date and
time of your present location.
Setting [World Time] enables you to display the local date and time on the monitor when traveling overseas.
1
Select [World Time] in the [R Set-up] menu.
2
Press the four-way controller
(5).
Wo r l d Ti m e
The [World Time] screen appears.
10
N e w Yo r k
N e w Yo r k
MENU 0 0 : 2 5
3
Use the four-way controller (45) to select X
(Destination) or W (Hometown).
This setting changes the date and time on the guide display screen.
4
Press the four-way controller (3).
The selection frame moves to X (Destination setting).
5
Press the four-way controller (5).
The screen for magnifying the Destination region appears.
6
Use the four-way controller
(45) to select the Destination city.
Turn the e-dial to change the region to magnify.
The current time, location and time difference of the selected city appears.
D e s t i n a t i o n
L o n d o n
D S T
MENU C a n c e l OK O K
+ 0 5 : 0 0
0 5 : 2 5
7
Use the four-way controller (3) to select [DST].
8
Use the four-way controller (45) to select O (On) or P
(Off).
Select O (On) if the Destination city uses daylight saving time (DST).
9
Press the 4 button.
The World Time setting is saved.
Wo r l d Ti m e
207
L o n d o n
N e w Yo r k
MENU 0 1 : 2 5
10
Press the 3 button twice.
The camera is ready to take a picture.
• See “List of World Time Cities” (p.208) for cities that can be specified as a
destination.
• Select W (Hometown setting) in Step 4 to set the city and DST setting.
• X appears on the guide display screen if World Time is set to X
• When you change World Time, the Video Out (p.214) setting changes to the
default setting for that city.
10
208
List of World Time Cities
10
Region
North
America
Central and
South
America
Europe
City
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Mexico City
Lima
Santiago
Caracas
Buenos Aires
Sao Paulo
Rio de Janeiro
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Warsaw
Athens
Helsinki
Moscow
Region
Africa/
West Asia
East Asia
City
Dakar
Algiers
Johannesburg
Istanbul
Cairo
Jerusalem
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Yangon
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho chi Minh
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
Region
Oceania
City
Perth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
Setting the Display Language
You can change the language in which the menus, error messages, etc. are displayed.
Set in [Language/ ] in the [R Set-up] menu (p.202).
You can choose from 18 languages: English, French, German, Spanish,
Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech,
Hungarian, Turkish, Russian, Korean, Chinese (Traditional/Simplified) and Japanese.
1
Setting the Display Language (p.49)
209
MENU C a n c e l OK O K
10
210
Adjusting the Monitor and the Menu
Display
Setting the Text Size
You can set the size of the text selected in the menus to [Std.] (normal display) or [Large] (magnified display).
Set in [Text Size] in the [R Set-up] menu (p.202).
S e t - u p
F o r m a t
B e e p
D a t e A d j u s t
Wo r l d Ti m e
L a n g u a g e
Te x t S i z e
MENU C a n c e l
S t d .
L a r g e
OK O K
Setting the Guide Display Time
Set the length of time that the guides are displayed on the monitor when
the camera is turned on or the exposure mode is changed. (p.22)
Select from [Off], [3 sec], [10 sec] and [30 sec]. The default setting is
[3 sec].
Set in [Guide display] in the [R Set-up] menu (p.202).
10
S e t - u p
G u i d e d i s p l a y
B r i g h t n e s s L e v e l
Vi d e o O u t
U S B C o n n e c t i o n
A u t o P o w e r O f f
F o l d e r N a m e
MENU C a n c e l
O f f
3s e c
10s e c
30s e c
1m i n
D a t e
OK O K
Adjusting the Brightness of the Monitor
You can adjust the brightness of the monitor. Adjust settings when the monitor is hard to see.
Set in [Brightness Level] in the [R Set-up] menu (p.202).
S e t - u p
G u i d e d i s p l a y
B r i g h t n e s s L e v e l
3s e c
0
211
MENU C a n c e l OK O K
Setting the Display for Instant Review and
Digital Preview
You can adjust the settings related to Instant Review and Digital Preview.
Setting the Instant Review
You can set the Instant Review display time and whether or not to display the histogram and Bright/Dark area warning. The default settings are [1 sec] for the display time and [Off] for the histogram and Bright/Dark area warning.
1
Select [Instant Review] in the [Q Playback] menu.
2
Press the four-way controller
(5).
The [Instant Review] screen appears.
I n s t a n t R e v i e w
D i s p l a y Ti m e
H i s t o g r a m
B r i g h t / D a r k a r e a
1s e c
10
MENU
212
3
Press the four-way controller (5) and use the four-way controller
(23) to select from [1 sec], [3 sec], [5 sec] or [Off], and then
press the 4 button.
I n s t a n t R e v i e w
D i s p l a y Ti m e
H i s t o g r a m
B r i g h t / D a r k a r e a
1s e c
3s e c
5s e c
O f f
MENU C a n c e l OK O K
4
Use the four-way controller (3) to select [Histogram].
5
Use the four-way controller (45) to select O (On) or P
(Off) for [Histogram].
6
Use the four-way controller (3) to select [Bright/Dark area].
7
Use the four-way controller (45) to select O (On) or P (Off).
8
Press the 3 button twice.
The camera is ready to take a picture.
Setting the Digital Preview
You can set whether or not to display the histogram and Bright/Dark area warning during Digital Preview. The default setting is [Off] for the histogram and Bright/Dark area warning.
10
1
Select [Digital Preview] in the [Q Playback] menu.
2
Press the four-way controller
(5).
D i g i t a l P r e v i e w
H i s t o g r a m
B r i g h t / D a r k a r e a The [Digital Preview] screen appears.
Proceed as from Step 4 in Instant
Review.
MENU
Setting the Image Folder Naming
Convention
213
Selecting the Folder Name
You can select the method for assigning the folder names for storing images. The default setting is [Date].
Date
PENTX
The two digits of the [month] and [day] on which the picture was taken are assigned as the folder name in the form of [xxx_MMDD]. [xxx] is a sequential number from 100 to 999. [MMDD] (month and day)
appears according to the display style set in [Date Adjust] (p.205).
(Example) 101_0125: for folders with pictures taken on January 25th
The folder name is assigned in the form of [xxxPENTX].
(Example) 101PENTX
Set in [Folder Name] in the [R Set-up] menu (p.202).
S e t - u p
G u i d e d i s p l a y
B r i g h t n e s s L e v e l
Vi d e o O u t
U S B C o n n e c t i o n
A u t o P o w e r O f f
F o l d e r N a m e
MENU C a n c e l
3s e c
0
NTSC
P C
D a t e
PENTX
OK O K
Selecting the File Number Setting
You can select the method for assigning the file number of an image when saved to a new folder. Select O (On) or P (Off) for [File No.] in [Memory]
in the [A Rec. Mode] menu. (p.217)
O (On)
P (Off)
The file number of the last image saved to the previous folder is saved and subsequent images are assigned sequential file numbers even if a new folder is created.
The file number of the first image saved to a folder returns to 0001 each time a new folder is created for saving images.
10
When the number of storable images exceeds 500, captured images are divided into folders of 500 images each. However, in Auto Bracket, images will be stored in the same folder until shooting is completed, even if the number of images exceeds 500.
214
Selecting the Video Output Format and Power Settings
Selecting the Video Output Format
When you connect the camera to AV equipment such as a TV, choose the appropriate video output format (NTSC or PAL) for playing back images.
Set in [Video Out] in the [R Set-up] menu (p.202).
1
Connecting the Camera to AV Equipment (p.179)
S e t - u p
G u i d e d i s p l a y
B r i g h t n e s s L e v e l
Vi d e o O u t
U S B C o n n e c t i o n
A u t o P o w e r O f f
F o l d e r N a m e
MENU C a n c e l
3s e c
0
NTSC
PAL
1m i n
D a t e
OK O K
The default video output format differs depending on the region. When you change the region set in World Time, the Video Out setting changes to the default setting for that city.
Setting Auto Power Off
10
You can set the camera to turn off automatically if unused after a certain length of time. Select from [1 min], [3 min], [5 min], [10 min], [30 min] or
[Off]. The default setting is [1 min].
Set in [Auto Power Off] in the [R Set-up] menu (p.202).
S e t - u p
G u i d e d i s p l a y
B r i g h t n e s s L e v e l
Vi d e o O u t
U S B C o n n e c t i o n
A u t o P o w e r O f f
F o l d e r N a m e
MENU C a n c e l
1m i n
3m i n
5m i n
10m i n
30m i n
O f f
OK O K
Auto Power Off will not work during slideshow playback or USB connection.
Selecting a Battery
You can set the battery priority to the camera or the battery grip when the
optional Battery Grip D-BG3 (p.235) is attached. The default setting is
[Auto Select].
1
Select [Select battery] in the [R Set-up] menu.
2
Press the four-way controller
(5).
S e l e c t b a t t e r y
A u t o S e l e c t
The [Select battery] screen appears.
215
MENU
3
Press the four-way controller (5).
4
Use the four-way controller (23) to select from [Auto Select],
[Body First] and [Grip First].
Auto Select: Priority is given to the battery set with more power.
Body First/Grip First: Priority is given to the selected battery set.
5
Press the 4 button.
6
Press the 3 button twice.
The camera is ready to take a picture.
S e l e c t b a t t e r y
A u t o S e l e c t
B o d y F i r s t
G r i p F i r s t
MENU C a n c e l OK O K
• If batteries are inserted into both the body and grip, the battery levels of both are checked when the power is turned on. Regardless of the [Select Battery] settings, both batteries are slightly used.
• When the currently selected battery set runs out as a result of the check,
[Battery depleted] appears on the monitor. Turn the camera off and on again, and the camera will switch to the battery set with power remaining.
10
216
Using Pixel Mapping
Pixel mapping is a function for mapping out and correcting for defective pixels in the CCD.
1
Select [Pixel Mapping] in the [R Set-up] menu.
2
Press the four-way controller
(5).
P i x e l M a p p i n g
F o r c h e c k i n g t h e i m a g e s e n s o r a s s e m b l y t o m a k e a d j u s t m e n t s
P i x e l M a p p i n g
C a n c e l
OK
3
Press the four-way controller (23) to select [Pixel
Mapping] and press the 4 button.
Defective pixels are mapped and corrected.
When the battery level is low, [Not enough battery remaining to activate Pixel
Mapping] is displayed on the monitor. Use the AC adapter D-AC76 (optional) or use batteries with ample power remaining.
10
Selecting Capture Mode Settings to
Save in the Camera
You can select which settings to save when the camera is turned off.
The following settings can be saved: Flash mode, Drive mode, White
Balance, Sensitivity, EV Compensation, Flash Exp. Comp., Playback
Display, Scene Display and File No. The default setting is [Off] for [Scene
Display], and [On] for the other settings.
1
Select [Memory] in the [A Rec. Mode] menu.
2
Press the four-way controller
(5).
The [Memory] screen appears.
M e m o r y
F l a s h M o d e
D r i v e M o d e
W h i t e B a l a n c e
S e n s i t i v i t y
E V C o m p e n s a t i o n
F l a s h E x p . C o m p .
MENU
3
Use the four-way controller (23) to choose an item.
4
Use the four-way controller (45) to select O (On) or P
(Off).
5
Press the 3 button twice.
The camera is ready to take a picture.
217
[File No.] sets whether to save a sequential number for the file name. See
“Selecting the File Number Setting” (p.213).
10
218
Memo
11
Resetting to Default
Settings
Resets the camera settings.
Resetting Rec. Mode/Playback/ Set-up Menu ..220
Resetting the Custom Function Menu ..............221
220
Resetting Rec. Mode/Playback/
Set-up Menu
Settings in [A Rec. Mode] menu, [Q Playback] menu and [R Set-up] menu can be reset to default settings.
However, Date Adjust, Language/
World Time city settings are not reset.
, Video Out, Text Size, and the
1
Select [Reset] in the [R Set-up] menu.
2
Press the four-way controller (5).
The [Reset] screen appears.
3
Use the four-way controller
(23) to select [Reset].
R e s e t
B a c k t o i n i t i a l s e t t i n g s
R e s e t
C a n c e l
OK O K
4
Press the 4 button.
The settings are reset and the camera is ready to take or play back images.
11
Resetting the Custom Function Menu
221
Reset settings in [A Custom Setting] menu to default settings.
1
Select [Reset Custom Function] in the [A Custom Setting] menu.
2
Press the four-way controller (5).
The [A Reset Custom Function] screen appears.
3
Use the four-way controller
(23) to select [Reset].
C R e s e t C u s t o m F u n c t i o n
R e t u r n s t h e c u s t o m f u n c t i o n s e t t i n g s t o i n i t i a l s e t t i n g s
R e s e t
C a n c e l
OK O K
4
Press the 4 button.
The settings are reset and the camera is ready to take or play back images.
11
222
Memo
12
Appendix
Default Settings ..................................................224
Functions Available with Various Lens
Combinations .....................................................228
Notes on [23. Using Aperture Ring] ..................230
Cleaning the CCD ...............................................231
Optional Accessories .........................................235
Error Messages ..................................................240
Troubleshooting .................................................243
Main Specifications ............................................246
Glossary ..............................................................250
Index ....................................................................255
WARRANTY POLICY ..........................................260
224
Default Settings
The table below lists the factory default settings.
The current setting (last memory) is saved when the camera is turned off.
Reset Setting
Yes : The setting returns to the default setting with the reset function
No : The setting is saved even after reset.
[A Rec. Mode] Menu
Item
AF Mode
AE Metering
Select AF point
File Format
JPEG Recorded Pixels
JPEG Quality
RAW file format
Color Space
| button
Cancel each time
JPEG/RAW/RAW+
File Format
Default Setting l
L (Multi-segment)
N (Auto)
JPEG
J (3872×2592)
C (Best)
PEF sRGB
O (On)
All RAW+
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
Memory
Input Focal Length
O (On) other than
[Scene Display]
35 (Focal Length)
Yes
Yes
12
[Q Playback] Menu
Playback display
Instant
Review
Item
Bright/Dark area
Quick Zoom
Display Time
Histogram
Bright/Dark area
Default Setting
P (Off)
P (Off)
1 sec
P (Off)
P (Off)
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Page
Reset
Setting
Yes
Yes
Yes
Yes
Page
225
Digital
Preview
Slideshow
Item
Histogram
Bright/Dark area
Interval
Repeat Playback
[R Set-up] Menu
Item
Format
Beep
Date Adjust
World Time setting
Hometown (City)
World Time
Hometown (DST)
Destination (City)
Destination (DST)
Language/
Text Size
Guide display
Brightness Level
Video Out
USB Connection
Auto Power Off
Folder Name
Select battery
Pixel Mapping
Dust Alert
Dust
Removal
Dust Removal
Start-up action
Default Setting
P (Off)
P (Off)
3 sec
P (Off)
Default Setting
—
All O (On)
According to default setting
W (Hometown)
According to default setting
According to default setting
Same as Hometown
Same as Hometown
According to default setting
According to default setting
3 sec
±0
According to default setting
PC
1 min
Date
Auto Select
—
—
—
P (Off)
No
Yes
Yes
No
Yes
Yes
Yes
Yes
—
—
—
Yes
Reset
Setting
—
Yes
No
Yes
No
Page
No
No
No
No
12
226
Item
Sensor Cleaning
Reset
Default Setting
—
—
[A Custom Setting] Menu
12
Item
Settings
1. EV Steps
2. Sensitivity Steps
3. Meter Operating Time
4. L with AF locked
5. Link AF Point and AE
6. Auto Bracketing order
7. Adjust White Balance
8. Superimpose AF Area
9. AF in remote control
10. Slow Shutter Speed NR
11. High-ISO Noise Reduction
12. 4 button when shooting
13. e-dial in Program
14. Green button in Manual
15. Release when Charging
16. Flash in Wireless Mode
17. WB when using flash
18. Preview Method
19. Display Sensitivity
20. Saving rotation info
21. Auto Image Rotation
22. Catch-in focus
23. Using aperture ring
Reset Custom Function*
* The [A Custom Setting] menu settings are reset.
Default Setting
P (Off)
1/2 EV Steps
1 EV Steps
10 sec
Off
Off
0 - +
Off
On
Off
On
Off
Sensitivity/
No. of Shots
Program shift
Program Line
Off
On
Flash
Digital Preview
Off
On
On
Off
Prohibited
—
Reset
Setting
—
—
Page
–
–
–
Page
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Fn Menu
Drive Mode
Item Default Setting
9 (Single frame shooting)
Flash Mode
White Balance
ISO Sensitivity
H (Scene) mode
Custom Image
DPOF Settings
Digital Filter*
Slideshow
RAW Display
Image Comparison
Depends on Capture mode
F (Auto)
AUTO
(ISO 100 - 400)
Night Scene
Bright
—
B&W
3 sec
Recorded Pixels: J
Quality Level: C
Sensitivity: ±0
—
* The filter color and frequency settings can be saved or reset.
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Reset
Setting
Yes
Page
Yes
—
227
12
228
Functions Available with Various
Lens Combinations
Lenses that can be used with this camera
Only DA and FA J lenses and D FA/FA/F/A lenses having an s (Auto) position on the aperture ring can be used with factory default settings.
Refer to Notes on [23. Using Aperture Ring] (p.230) in the [A Custom
Setting] menu for other lenses and D FA/FA/F/A lenses with aperture ring set to a position other than s.
Lens [Mount type]
Function
Autofocus (Lens only)
(With AF adapter 1.7×)
*1
Manual focus
(With the focus indicator)
*2
(With Matte field)
Eleven AF points
Power zoom
Aperture Priority Automatic Exposure
Shutter Priority Automatic Exposure
Manual Exposure
P-TTL Auto Flash
*4
Multi (16-segment) metering
Automatic lens focal length acquirement when using the Shake Reduction function
DA/D FA/
FA J/FA lens
[K
AF
, K
AF2
]
*3
Yes
—
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
F lens
[K
AF
]
*3
Yes
—
Yes
Yes
Yes
—
Yes
Yes
Yes
Yes
Yes
Yes
A lens
[K
A
]
—
Yes
*5
Yes
Yes
No
*5
—
Yes
Yes
Yes
Yes
Yes
No
Yes : Functions are available when the aperture ring is set to the s position.
No : Functions are unavailable.
12
*1 Lenses with a maximum aperture of f/2.8 or brighter. Only available at s position.
*2 Lenses with a maximum aperture of f/5.6 or brighter.
*3 To use an F/FA soft 85 mm f/2.8 lens or FA soft 28 mm f/2.8 lens, set [23. Using aperture
ring] (p.76) to [Permitted] in the [A Custom Setting] menu. Pictures can be taken with the
aperture you set, but only within manual aperture range.
*4 When using the built-in flash and AF540FGZ, AF360FGZ or AF200FG.
*5 The AF point becomes O (Center).
Lens names and mount names
DA lenses with an ultrasonic motor and FA zoom lenses with power zoom use the K
AF2
mount.
FA prime lenses (non-zoom lenses), DA lenses without ultrasonic motors and D FA, FA J and F lenses use the K
AF
mount.
See the lens manual for details. Note that this camera is not equipped with a power zoom function.
229
Lenses and accessories that cannot be used with this camera
When aperture ring is set at other than the s (Auto) position or a lens without an s position or accessories such as an auto extension tube or
Refer to “Notes on [23. Using Aperture Ring]” (p.230) for restriction that
apply when [23. Using aperture ring] is set to [Permitted] in the [A Custom
Setting] menu.
All camera exposure modes are available when using DA/FA J or lenses with an Aperture s position set to the s position.
Lens and Built-in Flash
The built-in flash cannot be regulated and fully fires when pre A lenses or soft focus lenses are used.
Note that the built-in flash cannot be used as an Auto Flash.
12
230
Notes on [23. Using Aperture Ring]
Aperture Ring Use
D FA, FA, F or A lens is not set to the s (Auto) position or a lens without an s position is attached. However, the features will be restricted as shown in the table below.
The camera operates in c (Aperture Priority) mode even if the mode dial is at
Picture mode, H (Scene) mode, e, K or b when the aperture is set to a value other than the s position.
12
Lens Used
D FA, FA, F, A, M (lens only or with auto diaphragm accessories such as auto extension tube K)
Exposure Mode c (Aperture
Priority) mode
Restriction
The aperture remains open regardless of the aperture ring position. The shutter speed changes in relation to the open aperture but an exposure error may occur. In the viewfinder, [F--] appears for the aperture indicator.
D FA, FA, F, A, M, S (with diaphragm accessories such as extension tube K)
Manual diaphragm lens such as reflex lens (lens only) c (Aperture
Priority) mode c (Aperture
Priority) mode
Pictures can be taken with the specified aperture value but an exposure error may occur. In the viewfinder, [F--] appears for the aperture indicator.
FA, F soft 85mm FA soft
28mm (lens only)
All lenses c (Aperture
Priority) mode a (Manual) mode
Pictures can be taken with the specified aperture value in the manual aperture range. In the viewfinder, [F--] appears for the aperture indicator. When depth of field is checked (Optical Preview),
AE Metering is switched on.
Exposure check is possible.
Pictures can be taken with the set aperture value and shutter speed.
In the viewfinder, [F--] appears for the aperture indicator. When depth of field is checked (Optical
Preview), AE Metering is switched on. Exposure check is possible.
Cleaning the CCD
Shadows may appear in the image for white backgrounds and other shooting conditions if the CCD becomes dirty or dusty. This indicates that the CCD must be cleaned.
Removing Dust by Shaking the CCD
The Dust Removal function shakes the CCD to remove dust that has collected.
1
Select [Dust Removal] in the
[R Set-up] menu and press the
four-way controller (5).
D u s t R e m o v a l
D u s t R e m o v a l
S t a r t - u p a c t i o n
231
MENU OK S t a r t
2
Press the 4 button.
The Dust Removal function is activated by shaking the CCD.
Select [Start-up action] and use the four-way controller (45) to select
O (On) to turn Dust Removal on every time the camera is turned on.
Detecting Dust on the CCD (Dust Alert)
Dust Alert is a function that detects dust adhering to the CCD and visually displays the location of the dust.
You can save the detected image and display it when performing sensor
The following conditions must be met before using the Dust Alert function:
• A DA, FA J lens or a D FA, FA and F lens that has an Aperture s (Auto) position is attached.
• The aperture is set to the s position when using a lens with an aperture ring.
• The focus mode lever is set to =.
12
232
1
Select [Dust Alert] in the [R Set- up] menu.
2
Press the four-way controller (5).
The [Dust Alert] screen appears.
3
Fully display a white wall or uniformly bright subject in the viewfinder and press the shutter release button fully.
After image processing is performed, the
Dust Alert screen appears.
4
Press the 4 button.
The image is saved and Dust Alert is exited.
S e t - u p
S e l e c t b a t t e r y
P i x e l M a p p i n g
D u s t A l e r t
D u s t R e m o v a l
S e n s o r C l e a n i n g
R e s e t
MENU E x i t
OK
• The exposure time may be extremely long when using the Dust Alert function. Note that if the direction of the lens is changed before processing is complete, dust will not be detected properly.
• Depending on the subject conditions or temperature, dust may not be detected properly.
• The Dust Alert image can only be displayed during sensor cleaning within 30 minutes from the time the image is saved. If 30 minutes elapse, save a new
Dust Alert image and then perform sensor cleaning.
• The saved Dust Alert image cannot be displayed in Playback mode.
• Dust Alert image cannot be saved when an SD Memory Card is not inserted.
12
• If [NG] is displayed in Step 3 and the camera is unable to detect dust, press the 4 button and take another picture.
• Regardless of the camera settings, a picture will be taken with specific shooting conditions in Step 3.
• Press the M button or turn the e-dial when displaying the Dust Alert image to view it at full screen display.
Removing Dust with a Blower
Raise the mirror up and open the shutter to clean with a blower.
Please contact PENTAX Service Center for professional cleaning because the CCD is a precision part. Cleaning services involve a fee.
You can use the Imagesensor Cleaning Kit O-ICK1 (optional) when cleaning the CCD.
• Do not use a spray type blower.
• Do not clean the sensor when the exposure mode is set to p (Bulb) mode.
• Always cap the lens mount area to prevent dirt and dust from accumulating on the CCD when no lens is on the camera.
• When the battery level is low, [Not enough battery remaining to clean sensor] is displayed on the monitor.
• If you are not using the AC adapter D-AC76 (optional), please use batteries with ample capacity remaining. If the battery capacity becomes low during cleaning, a message will be displayed on the monitor and a warning beep will sound. Please stop cleaning immediately.
• Do not put the tip of the blower inside the lens mount area. If the power is turned off, this could cause damage to the shutter, CCD or the mirror.
• It is recommended to use the AC adapter D-AC76 (optional) when cleaning the sensor.
• The self-timer lamp blinks and [Cln] appears on the LCD panel while cleaning the sensor.
• This camera features a CCD shifting shake reduction system, and it may generate a vibration sound while cleaning the CCD. It is not a malfunction.
1
Turn the camera off and remove the lens.
2
Turn the camera on.
3
Select [Sensor Cleaning] in the [R Set-up] menu.
233
12
234
4
Press the four-way controller (5).
The [Sensor Cleaning] screen appears.
5
Use the four-way controller
(23) to select [Mirror Up].
S e n s o r C l e a n i n g
Starts mirror lockup to clean the sensor. Turn the power off to finish
M i r r o r U p
C a n c e l
OK O K
6
Press the 4 button.
The mirror is locked in the up position.
If you used Dust Alert to detect dust on the sensor within the last 30 minutes, the Dust Alert image appears on the monitor. Clean the sensor while checking the location of the dust.
7
Clean the CCD.
Use a brush-less blower to remove dirt and dust from the CCD. Using a blower with a brush may scratch the CCD. Do not wipe the CCD with a cloth.
8
Turn off the camera.
9
Attach the lens after the mirror returns to its original position.
12
Optional Accessories
A number of dedicated accessories are available for this camera. Please contact a PENTAX Service Center for details regarding accessories.
Products marked with an asterisk (*) are the same as those supplied with the camera.
Battery Grip D-BG3
The Battery Grip has features such as a shutter release button and L button to accommodate shooting vertically.
235
Power Supply Accessories
AC Adapter D-AC76
Lets you power your camera with the outlet when combined with the AC plug cord.
AC plug cord (*)
12
236
Flash Accessories
Auto Flash AF540FGZ
Auto Flash AF360FGZ
The AF540FGZ and AF360FGZ are P-
TTL auto flash units with a maximum guide number of 54 and 36 (ISO 100/m), respectively. Their features include slave-sync flash, contrast-control-sync flash, auto flash, high-speed sync flash, wireless flash, slow-speed sync and trailing curtain sync flash.
AF540FGZ
AF360FGZ
Auto Flash AF200FG
The AF200FG is a P-TTL auto flash unit with a maximum guide number of 20
(ISO 100/m). It features contrastcontrol-sync flash and slow-speed sync flash when combined with the
AF540FGZ or AF360FGZ unit.
Hot Shoe Adapter F
G
Extension Cord F5P
12
Off-Camera Shoe Adapter F
Use the adapters and cords to use the external flash away from the camera.
AF200FG
Hot Shoe Adapter F
G
Off-camera Shoe Adapter F
Off-camera Shoe Clip CL-10
When using the AF540FGZ or
AF360FGZ as a wireless flash, this large clip is used for setting the external flash on a desk or table.
For Viewfinder
Magnifier Eyecup O-ME53
This viewfinder accessory is for magnifying up to 1.18 times.
When the eyecup is attached to the x with a viewfinder magnification of approximately 0.85 times, the combined magnification becomes 1.0 times, making manual focusing much easier.
Magnifier F
B
This viewfinder accessory is for magnifying the central area of the viewfinder 2×.
You can see the entire view by simply flipping up the accessory from the eyepiece, as it is a hinge-type magnifier.
Ref-converter A
This is an accessory that changes the viewfinder viewing angle at 90° intervals. The viewfinder magnification can be switched between 1× and 2×.
237
12
238
Diopter correction lens adapter M
This accessory adjusts the diopter.
Install it on the viewfinder.
If it is difficult to see the viewfinder image clearly, choose one of the eight correction lens adapter M of approximately –5 to +3 m
–1
(per meter).
ME Viewfinder Cap (*)
Eyecup F
P
(*)
Cable Switch CS-205
Connect to the cable switch terminal and operate the camera shutter release button. The cord length is 0.5 m.
Remote Control F
Lets you shoot pictures from within 5 m of the front of the camera.
Camera Case/Strap
12
Camera Case O-CC74
Camera Strap O-ST53 (*)
Imagesensor Cleaning Kit O-ICK1
Clean the optical parts such as the CCD and lens of this camera.
Others
Body Mount Cap K
Hot Shoe Cover F
K
(*)
USB Cable I-USB17 (*)
Video Cable I-VC28 (*)
239
12
240
Error Messages
12
Error Message
Memory card full
No image
Camera cannot display this image
No card in the camera
Memory card error
Card not formatted
Card locked
The card is electronically locked
This image cannot be enlarged
This image is protected
Battery depleted
Not enough battery remaining to clean sensor
Description
The SD Memory Card is full and no more images can be saved. Insert a new SD Memory Card or
delete unwanted images. (p.41, p.72)
You may be able to save new images by converting to JPEG format or changing the JPEG
record pixels or JPEG quality setting. (p.146,
There are no images for playback on the SD
Memory Card.
You are trying to play back an image in a format not supported by this camera. You may be able to play it back on another brand of camera or your computer.
The SD Memory Card is not inserted in the
The SD Memory Card has a problem, and image capture and playback are impossible. It may be viewable on a PC but not with this camera.
The SD Memory Card you have inserted is unformatted or has been formatted on a computer or other device and is not compatible with this camera. Use the card after formatting it
A locked SD Memory Card is inserted in the
camera. Unlock the SD Memory Card. (p.42)
Data is protected by the SD Memory Card security feature.
You are trying to enlarge an image that cannot be enlarged.
You are trying to delete an image that is protected. Remove protection from the image.
The batteries are exhausted. Install new
batteries in the camera. (p.37)
Appears during sensor cleaning if the battery level is insufficient. Replace the batteries with new ones or use an AC adaptor D-AC76
Error Message
Not enough battery remaining to activate
Pixel Mapping
Image folder cannot be created
The image is not stored
Settings not stored
NG
Rotation information cannot be saved to this image
No more images can be selected
This RAW file cannot be developed
This image cannot be filtered
No DPOF files
Printer error
No paper in the printer
Printer settings are changed
Low paper level in the printer
241
Description
Appears during pixel mapping if the battery level is insufficient. Replace the batteries with new ones or use an AC adaptor D-AC76 (optional).
The maximum folder number (999) and file number (9999) are being used, and no more images can be saved. Insert a new SD Memory
Card or format the card. (p.203)
The image could not be saved because of an SD
Memory Card error.
The DPOF settings or rotated image could not be saved because SD Memory Card is full. Delete unwanted images and perform DPOF settings or
The camera was unable to measure the manual white balance or detect dust on the sensor. Try
the operation again. (p.152, p.231)
New rotation information cannot be saved to an image without rotation information.
You cannot select 100 or more images to delete
RAW files captured with other cameras cannot be edited on this camera.
Appears when digital filter is started from Fn menu for images captured with other cameras.
No files are set with DPOF. Set DPOF and then
There is an error with the printer and the file cannot be printed. Fix all the errors and try printing again.
Printer has run out of paper. Put paper in the printer and print.
The camera received notification that the printer status has changed. Press the 4 button to reconnect to the printer.
Printer is running out of paper. This appears when this signal is received from the printer. After two seconds, the printer resumes printing.
12
242
Error Message
Low ink level in the printer
No ink in the printer
Paper stuck in the printer
Data error
Turn the power off
Description
Printer is running out of ink. This appears when this signal is received from the printer. After two seconds, the printer resumes printing.
Printer has run out of ink. Replace ink and print.
Paper is jammed in the printer. Remove paper and print.
A data error has occurred during printing.
This appears when exiting the PictBridge mode.
Turn the main switch off.
12
Troubleshooting
243
We recommend checking the following items before contacting a service center.
on
Problem
The camera does not turn
Cause
Batteries are not installed
Batteries are not installed properly
The battery power is low
The lens aperture ring setting is other than the s position
Remedy
Check if batteries are installed. If not, install charged batteries.
Check orientation of batteries.
Re-insert batteries according to the +-
Replace with charged batteries or use the
AC adapter D-AC76 (optional). (p.40)
Set the lens aperture ring to the s position
(p.87) or select [Permitted] in [23. Using aperture ring] in the [A Custom Setting]
The shutter does not release
The
Autofocus does not work
The flash is charging
There is no available space on the SD Memory
Card
Recording
Wait until charging is finished.
Insert an SD Memory Card with available
space or delete unwanted images. (p.41,
The subject is difficult to focus on
The subject is not in the focusing area
The subject is too close
The focus mode is set to \
Wait until recording is finished.
Autofocus cannot focus well on subjects that have low contrast (the sky, white walls), dark colors, intricate designs, rapidlymoving objects or scenery shot through a window or a net-like pattern. Lock focus on another object located at the same distance as your subject (press the shutter release button halfway), then aim at target and press the shutter release button fully.
Alternatively, use manual focus. (p.109)
Position the subject in the focus frame in the middle of the viewfinder. If the subject is outside the focusing area, aim the camera at the subject and lock the focus (press the shutter release button halfway), then compose a picture and press the shutter release button fully.
Move away from the subject and take a picture.
Set the focus mode lever to =. (p.102)
12
244
12
Problem Cause
The AF mode is set to k
(Continuous mode)
The subject is not in focus
The AE lock function does not operate
The flash does not discharge
The Capture mode is set to \
(Moving Object),
C (Kids) or E
(Pet) in H mode
The exposure mode is set to a
(Manual) mode or p (Bulb) mode
When the flash mode is set to [Auto discharge] or [Auto flash+Redeye reduct], the flash will not discharge if the subject is bright
Mode dial is set to a (Flash OFF)
H (Scene) mode is set to A (Night
Scene),
K (Sunset),
D (Candlelight) or
E (Museum)
The power zoom system does not function
The USB connection with a computer does not work properly
The USB connection with a printer does not work properly
The camera does not have the power zoom function
The Transfer Mode is set to
[PictBridge]
The Transfer Mode is set to [PC]
Remedy
Autofocus is not locked (focus lock) when the AF mode is set to k. The camera will continue focusing on the subject while the shutter release button is pressed halfway. If there is a subject that you wish to focus on, set the AF mode to l (Single mode) and use the focus lock.
Set the Capture mode to setting other than
\ (Moving Object), C (Kids) or E (Pet) in
Use AE lock with any setting other than a
(Manual) mode or p (Bulb) mode.
Set the flash mode to [Flash On] or [Flash
Set mode dial to any setting other than a
Set H (Scene) mode to any setting other than A (Night Scene), K (Sunset),
D (Candlelight) or E (Museum). (p.79)
Set [USB Connection] in the [R Set-up] menu to [PC].
Refer to p.11 of the “PENTAX PHOTO
Browser 3/PENTAX PHOTO Laboratory 3
Operating Manual” for details on connecting the camera to a PC.
Set [USB Connection] in the [R Set-up]
Problem
Shake
Reduction does not work
Cause
The Shake
Reduction function is off
Remedy
Turn on the Shake Reduction switch. (p.68)
The Shake
Reduction function is not set properly
If a lens for which focal length information cannot be acquired is used, set the [Focal
Length] on the [Input Focal Length] menu.
Shutter speed is too low for the
Shake Reduction function to be effective when panning or shooting night scenes, etc.
The subject is too close
Turn off the Shake Reduction function and use a tripod.
Move away from the subject, or turn off the
Shake Reduction function and use a tripod.
245
In rare cases, the camera may not operate correctly due to static electricity.
This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs.
12
246
Main Specifications
12
Type
Effective Pixels
Sensor
Recorded Pixels
TTL autofocus, auto-exposure SLR digital-still camera with built-in retractable P-TTL flash
Approx. 10.2 megapixels
Total pixels approx. 10.75 megapixels, Primary color filter, interline/interlace scan CCD
J (RAW: 3872×2592 pixels), J (JPEG: 3872×2592 pixels), P (3008×2000 pixels), i (1824×1216 pixels)
Sensitivity
(Standard output sensitivity)
Auto, Manual (ISO 100 to 1600 (EV steps can be set to 1 EV,
1/2 EV or 1/3 EV))
File Format
JPEG Quality
Storage Medium
Number of Shots
RAW (PEF/DNG), JPEG (Exif 2.21), DCF 2.0 compliant,
DPOF compatible, Print Image Matching III compatible,
RAW+JPEG simultaneous capturing compatible
C (Best), D (Better), and E (Good)
SD Memory Card, SDHC Memory Card
Recorded
Pixels
J
3872×2592
File Format/
JPEG Quality
4GB 2GB
Capacity
1GB 512MB 256MB 128MB
| (PEF) Approx. 235 Approx. 119 Approx. 58 Approx. 29 Approx. 14 Approx. 7
| (DNG) Approx. 235 Approx. 119 Approx. 58 Approx. 29 Approx. 14 Approx. 7
J
3872×2592
P
3008×2000 i
1824×1216
C
Approx. 804 Approx. 409 Approx. 202 Approx. 101 Approx. 50 Approx. 26
D Approx. 1371 Approx. 698 Approx. 343 Approx. 171 Approx. 86 Approx. 44
E
Approx. 2320 Approx. 1181 Approx. 586 Approx. 293 Approx. 147 Approx. 75
C Approx. 1340 Approx. 682 Approx. 335 Approx. 167 Approx. 84 Approx. 43
D
Approx. 2277 Approx. 1159 Approx. 570 Approx. 284 Approx. 143 Approx. 73
E Approx. 3893 Approx. 1982 Approx. 974 Approx. 487 Approx. 245 Approx. 125
C
Approx. 3549 Approx. 1807 Approx. 902 Approx. 450 Approx. 227 Approx. 116
D Approx. 6034 Approx. 3073 Approx. 1549 Approx. 774 Approx. 390 Approx. 200
E
Approx. 10057 Approx. 5121 Approx. 2627 Approx. 1313 Approx. 662 Approx. 339
JPEG Quality (Compression): C (Best) = 1/4.5, D (Better) = 1/8, E (Good) = 1/16
White Balance
Monitor
Auto, Daylight, Shade, Cloudy, Fluorescent Light (D: Daylight,
N: Neutral White, W: White), Tungsten Light, Flash, Manual, fine tuning available
2.7 inch wide viewing field TFT color LCD with approx. 230,000 dots, brightness adjustment function
247
Playback Function
Digital Filter
Exposure Mode
Shutter
Lens Mount
Lens Used
Autofocus System
Viewfinder
Viewfinder Indication
LCD Panel Display
Single frame, 4-image display, 9-image display, 16-image display, zoom display (up to 16 times, scrolling possible), image comparison, rotating, folder display, slideshow, histogram, bright/dark area
B&W, Sepia, Color, Soft, Illustration, HDR, Slim, Brightness
(only for processing after shooting) e Program, K Sensitivity priority, b Shutter priority, c Aperture priority, a Manual, p Bulb
Picture mode I Auto Picture, = Portrait, s Landscape, q Macro, \ Moving Object, . Night Scene
Portrait, a Flash OFF
Scene mode A Night Scene, i Surf & Snow, K Food,
K Sunset, C Kids, E Pet, D Candlelight,
E Museum
Electronically controlled vertical-run focal-plane shutter, Speed range (1) Auto 1/4000 to 30 sec. (stepless), (2) Manual 1/4000 to 30 sec. (1/2 EV step or 1/3 EV step), Bulb, Electromagnetic release, Shutter lock by setting Main switch in OFF position
PENTAX K
AF2
bayonet mount (AF coupler, lens information contacts, K-mount with power contacts)
PENTAX K
AF2
mount lenses (power zoom not available), K
AF mount lenses, K
A
mount lenses
TTL phase-matching autofocus system (SAFOX VIII), AF operational brightness range: EV –1 to 18 (at ISO 100 with f/1.4 lens), Focus lock available, Focus Mode: l (Single)/k
(Continuous)/\, Adjustable AF point
Penta-mirror viewfinder, Natural-Bright-Matte II focusing screen,
Field of view: approx. 96%, Magnification: approx. 0.85× (with
50 mm f/1.4 lens at ∞ ), Diopter: approx. –2.5 to +1.5m
-1 (per meter)
Focus information: ] is lit when in-focus and blinking when unable to focus, b is lit = Built-in flash ready, b is blinking =
Flash should be used, Shutter speed, Confirm Sensitivity,
Aperture value, e-dial enabled indicator, @ = AE lock, Capacity remaining, m = EV compensation, k=Continuous mode, \
= Manual focus, Picture mode icon, Scene mode icon, Shake
Reduction display, RAW/RAW+ b is lit = Built-in flash ready, b is blinking = Flash should be used, E = Auto discharge, > = Redeye reduction,
9 =Single frame shooting, j = Continuous shooting, g = Selftimer, h= Remote control shooting, ? = Battery exhaustion warning, ] = Auto bracket exposure (EV steps can be set to 1/
2 EV or 1/3 EV), M=Center-weighted metering, N=Spot metering, V=AF Point Select, M=Center of AF Point, Confirm sensitivity, Shutter speed, Aperture value, White Balance,
Remaining capacity, m = EV compensation, PC (mass storage)/
Pb (PictBridge) appears when the USB cable is connected,
1 , 1P
12
248
12
Preview Function
Continuous shooting
(Hi/Lo)
Self-timer
Remote Control
Mirror
Custom Image
Exposure Bracket
Exposure Meter/
Exposure Range
EV Compensation
AE Lock
Built-in Flash
External Flash Sync
Custom Function
Time Function
Shake Reduction
Function
Dust Removal
Power
Digital Preview: Composition, exposure, focus and white balance confirmation
Optical Preview:Depth of field confirmation (electronically controlled and usable in all exposure modes)
Approx. 2.8 fps (JPEG (10M, C, Hi): up to 4 frames, RAW: up to 4 frames)
Approx. 1.1 fps (JPEG (10M, C, Lo): until SD Memory Card is full, RAW: up to 4 frames)
Electronically controlled with delay time of 12 sec./2 sec. (with mirror up function). Start by pressing the shutter release button.
Operation confirmation: Possible to set beep. Can be cancelled after activation
PENTAX Remote Control F (optional) Release shutter immediately or three seconds after pressing the remote control shutter button
Quick-return mirror, mirror up function (2 sec. self-timer)
Image Tone (6 types), Saturation/Filter Effect, Hue/Toning,
Contrast, Sharpness/Fine Sharpness
Three frames (underexposed, proper exposure and overexposed) are shot continuously with exposure bracketing.
(Selectable between 1/2 EV and 1/3 EV for EV steps)
TTL multi (16-segment metering), Exposure range from EV 0 to
EV 21 at ISO 100, with 50 mm f/1.4 lens, Center-weighted and
Spot metering mode can be set
±3 EV (1/2 EV Steps), ±2 EV (1/3 EV Steps), EV Steps can be selected
Button type (timer type: two times the meter operating time set in Custom Setting) Continuous as long as the shutter button is halfway pressed.
P-TTL built-in flash with serial control, GN approx. 13 (ISO 100),
Angles of coverage: 28 mm lens angle of view (35 mm equivalent), Flash synchronization speed range at 1/180 sec. and slower, Daylight-sync flash, Slow-speed-sync flash, ISO range = P-TTL: 100 to 1600, Auto-popup function
Hot shoe with M-contact, which couples with PENTAX dedicated auto flashes, ISO range = P-TTL: 100 to 1600,
Automatic flash, Red-eye reduction flash function, High-speedsync and wireless-sync with PENTAX dedicated flash
23 functions can be set
World Time settings for 75 cities (28 time zones)
CCD Image Sensor Shift, effective compensation range = up to
4 EV (dependent on the used lens type and shooting conditions)
SP coating and CCD operations for dust removal. Can be set to operate when the camera is turned on.
Four AA lithium, AA Ni-MH rechargeable, or AA alkaline batteries
Battery Exhaustion
Battery exhaustion symbol ? is lit. (The shutter is locked and no indication appears in the viewfinder when ? starts blinking.)
In/Out Port
USB/Video terminal (USB 2.0 (high speed compatible)), DC input terminal, Remote release terminal
Video Output Format NTSC/PAL
PictBridge
Dimensions and
Weight
Accessories
Languages
Compatible printer: PictBridge-compatible printer
Print mode: Single Image, All Images, DPOF
AUTOPRINT
Approx. 133.5 mm (W) × 95 mm (H) × 74 mm (D) (excluding protrusions) approx. 630 g (body only), approx. 690 g (including four AA lithium batteries and an SD Memory Card), approx. 725 g (including four AA alkaline batteries and an SD Memory Card)
Hot shoe cover F
K
, Eyecup F
P
, ME viewfinder cap, Body mount cover, USB Cable I-USB17, Video cable I-VC28, Software (CD-
ROM) S-SW74 (PENTAX PHOTO Browser 3/PENTAX PHOTO
Laboratory 3), Strap O-ST53, AA lithium batteries (four),
Operating Manual (this book), Quick Guide, PENTAX PHOTO
Browser 3/PENTAX PHOTO Laboratory 3 Operating Manual
English, French, German, Spanish, Portuguese, Italian, Dutch,
Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish,
Russian, Korean, Chinese (Traditional/Simplified) and
Japanese
249
12
250
Glossary
AdobeRGB
Color space recommended by Adobe Systems, Inc. for commercial printing. Wider range of color reproduction than sRGB. Covers most of the color range so colors only available when printed are not lost when editing images on a computer. When image is opened by non-compatible software, the colors look lighter.
AE Metering
Brightness of subject is measured to determine exposure. In this camera, select from [Multi-segment Metering], [Center-weighted Metering] and
[Spot Metering].
Aperture
The aperture increases or reduces the light beam (thickness) passing through the lens to the CCD.
Auto Bracket
For automatically changing exposure. When the shutter button is pressed, three images are shot. The first one has no compensation, the second is underexposed and the third is over-exposed.
Bright Portion
Overexposed area in the image loses contrast and appears white.
12
Camera Shake (Blur)
When the camera moves while the shutter is open, the entire image appears blurred. This occurs more often when shutter speed is low.
Prevent camera shake by raising the sensitivity, using the flash, and raising the shutter speed. Alternatively, use a tripod to stabilize the camera. As camera shake is mostly likely to occur when pressing the shutter release button, use the Shake Reduction function, the self-timer, the remote control unit, or the cable switch to prevent camera movement.
CCD (Charge Coupled Devices)
Photography element which converts the light entering through the lens into electric signals that create the image.
251
Color Space
A defined range of colors from the spectrum which are used. In digital cameras, [sRGB] is defined as the standard by Exif. In this camera,
[AdobeRGB] is also used because of the richer color expression over sRGB.
Color Temperature
This numerically expresses the color of the light source illuminating the subject. This is indicated in absolute temperature, using Kelvin (K) units.
The color of light shifts to a bluish color as the color temperature rises, and to a reddish color as the color temperature falls.
Dark Portion
Underexposed area in the image loses contrast and appears black.
DCF (Design Rule for Camera File System)
A digital camera file system standard established by the Japan Electronics and Information Technology Industries Association (JEITA).
Depth of field
Area of focus. This depends on the aperture, lens focal length, and distance to the subject. For example, select a smaller aperture (higher number) to increase the depth of field or use a larger aperture (smaller number) to decrease the depth of field.
DNG RAW file
DNG (Digital Negative) is a general-purpose RAW file format designed by
Adobe Systems. When images captured in proprietary RAW formats are converted to DNG format, support and compatibility for the images increases significantly.
DPOF (Digital Print Order Format)
Rules for writing information onto a card with recorded images regarding the specific images and number of copies to be printed. Prints can easily be made by taking images to a DPOF photo printing store.
12
252
Dynamic Range (D-Range)
Indicated with a value expressing the light level reproducible in an image.
This is the same as the term “Exposure latitude” used with silver halide film.
Generally, when the dynamic range is wide, it is difficult for bright and dark areas to be recorded in the image, and when the dynamic range is narrow, a sharp image can be obtained.
EV (Exposure Value)
Exposure value is determined by the combination of the aperture value and the shutter speed.
EV Compensation
Process of adjusting the image brightness by changing the shutter speed and/or aperture value.
Exif (Exchangeable image file format for digital still camera)
A standard digital camera file format established by the Japan Electronics and Information Technology Industries Association (JEITA).
Focus point
Position in the viewfinder that determines focus. In this camera, select from [Auto], [Select] and [Center].
Histogram
A graph that shows the darkest and brightest points in an image. The horizontal axis represents the brightness and the vertical axis represents the number of pixels. This is useful when you wish to refer to the exposure status of an image.
ISO Sensitivity
The level of sensitivity to light. With a high sensitivity, images can be shot with a high shutter speed even in dark places, reducing camera shake.
However, images with high sensitivity are more susceptible to noise.
12 JPEG
An image compression method. In this camera, select from C (Best),
D (Better), or E (Good). Images recorded in JPEG format are suited for viewing on your PC or for attaching to e-mail.
253
ND (Neutral Density) Filter
A filter available in different saturation levels that adjusts the brightness without affecting the color tone of pictures.
Noise Reduction
Process to reduce noise (image roughness or unevenness) caused by slow shutter speed or high sensitivity shooting.
NTSC/PAL
These are video output formats. NTSC is mainly used in Japan, North
America, and South Korea. PAL is mainly used in Europe and in China.
Quality Level
This refers to the image compression ratio. The lower the compression, the more detailed the image. The image becomes rougher as the compression rate rises.
RAW data
Unedited image data output from the CCD. RAW data is data before being internally processed by the camera. Camera settings at the time of capture, such as White Balance, Contrast, Saturation, and Sharpness can be set for each frame after shooting. In addition, RAW data is 12 bit data that contains 16 times the information of 8 bit JPEG data. Rich gradations are possible. Transfer RAW data to your computer and use the provided software to create image data with different settings, such as JPEG.
Recorded Pixels
Indicates the size of the image by the number of pixels. The more pixels that compose a picture, the larger the image size.
Shutter Speed
The length of time that the shutter is open and light strikes the CCD. The amount of light that strikes the CCD can be changed by altering the shutter speed.
sRGB (standard RGB)
International standard of color space established by the IEC (International
Electrotechnical Commission). This is defined from color space for PC monitors and is also used as the standard color space for Exif.
12
254
Vignetting
The picture edges are blackened when part of the light coming from the subject is blocked by the hood or filter ring, or when the flash is partially blocked by the lens.
White Balance
While shooting, color temperature is adjusted to match the light source so that the subject appears to have correct color.
12
Index
255
Symbols
Menu ......................75, 158, 226
i (Delete) button .............21, 72
button .......................19, 21, 100
K (Flash pop-up) button ...............................19, 62
button .........................19, 21, 70
[Q Playback] Menu ....158, 224
| Preview ............................113
(Protect) button .......21, 177
[A Rec. Mode] Menu .....74, 224
[R Set-up] Menu ..........202, 225
I Auto Picture ..................78
= Portrait ...............................78
s Landscape .........................78
q Macro .................................78
\ Moving Object ...................78
Night Scene Portrait ..........78
a Flash OFF ..........................78
A Night Scene ......................79
i Surf & Snow .....................79
K Food ...................................79
K Sunset .............................79
C Kids ...................................79
E Pet ....................................79
D Candlelight ........................79
E Museum ............................79
A
AC Adapter .............................40
Adding the Date ...................190
AdobeRGB ...........................155
AE Lock ................................101
AE Metering ...........................98
L button .................... 19, 96
= (Autofocus) .................... 102
AF Mode .............................. 104
AF200FG ............................. 134
AF360FGZ ........................... 134
AF540FGZ ........................... 134
..................................... 102, 104
Alkaline batteries .................... 37
Aperture ................................. 82
Aperture Priority Mode c ..... 92
Auto Bracket ........................ 124
Auto Picture I .................. 78
Auto Power Off ..................... 214
Autofocus = ...................... 102
Correction .............................. 83
c (Aperture Priority) mode ... 92
AV Equipment ...................... 179
B
p (Bulb) Mode ....................... 97
B&W (Digital Filter) .............. 183
Batteries ......................... 37, 215
Beep ..................................... 204
Bright/Dark area ................... 170
Brightness (Digital Filter) ...... 184
Brightness Level .................. 211
Brightness of the Monitor ..... 211
Built-in Flash .......................... 62
Bulb Mode p .......................... 97
C
Cable Switch .......................... 97
Candlelight D ........................ 79
Capture Information ......... 23, 25
Capture Mode .................. 32, 78
12
256
12
Card access lamp ..................17
CCD cleaning .......................231
Center-weighted .....................99
Cloudy (White Balance) .......150
Color (Digital Filter) ..............183
Color Space .........................155
Color Temperature ...............152
Continuous Autofocus ..........108
.............................102, 104
Continuous Shooting ............115
Contrast ................................144
(Flash) ..................................142
Correct exposure ....................81
Custom Image ......................144
Custom Setting ...............75, 158
Menu ......................75, 158, 226
D
Date Adjust .............................52
Date change .........................205
Daylight (White Balance) ......150
Daylight-Sync Shooting ..........66
Delete .............................72, 173
Delete All Images .................173
i (Delete) button .............21, 72
Delete Folder ........................176
Deleting a Single Image .........72
Depth of field ..........................82
Digital Filter ..........................182
Digital Preview .............113, 212
Diopter Adjust .........................47
Direct Printing .......................193
Display Language ................209
Display Style ........................170
DPOF AUTOPRINT .............199
DPOF Settings .....................190
Drive Mode .............................77
Dust Alert .............................231
Dust Removal ...................... 231
E
e-dial ................................ 19, 21
e-dial in Program .................... 88
Error Message ..................... 240
EV Compensation ................ 100
button ....................... 19, 21, 100
Expand Dynamic Range ........ 84
Exposure ................................ 81
Exposure Bracket ................. 124
Exposure metering timer ...... 126
Exposure Mode ...................... 85
Exposure Warning ..... 91, 93, 95
External flash ....................... 134
Eyecup ................................... 47
F
File Format ........................... 148
Filter ..................................... 182
Filter Effect ........................... 144
Fireworks ............................... 97
Fix Focus ............................. 107
Flash .............................. 62, 127
Flash (White Balance) .......... 150
Compensation ...................... 128
Flash Off ................................ 78
Flash OFF a ......................... 78
button ............................... 19, 62
(White Balance) ................... 150
{ button ............ 19, 21, 77, 159
{ Menu ................. 77, 159, 227
Focal Length .......................... 69
Focus Indicator .................... 109
Focus Lock ........................... 107
Focus Mode ......................... 102
Focus mode lever .................. 19
Focus point ...........................105
Focusing ...............................102
Folder Name ........................213
Food K ...................................79
Format ..................................203
(2345) ........................19, 21
G
Green button ..........................18
Green button in Manual ..........96
Guide display .................22, 210
H
HDR (Digital Filter) ...............184
High-ISO Noise Reduction .....85
Mode ....................................136
Histogram .......................26, 170
Hue .......................................144
Hyper-program .......................88
I
Illustration (Digital Filter) ......183
Image Comparison ...............166
Image Tone ..........................144
M button ........19, 21, 23, 70
Initial Settings .................49, 224
Input Focal Length .................69
Instant Review ......................211
ISO sensitivity ........................83
J
JPEG Quality ..................43, 147
Pixels ..............................43, 146
K
Kids C ...................................79
L
Landscape s .........................78
257
Language Setting ................... 49
LCD panel .............................. 29
Lens ............................... 45, 228
Lens unlock button ........... 18, 46
Lithium batteries ..................... 37
Lock Exposure ..................... 108
M
a (Manual) Mode .................. 94
Macro q ................................. 78
Main switch ................ 18, 21, 48
Manual focus \ ................ 109
Manual Mode a ..................... 94
Manual White Balance ......... 152
Matte Field ........................... 110
Memory ................................ 217
3 button ............. 19, 21, 30
Menu Operation ..................... 30
Meter Operating Time ............ 99
Metering mode ....................... 98
\ (Manual focus) .............. 109
Mirror Up ...................... 123, 234
Mode dial ................... 19, 32, 78
Mode Palette .......................... 80
Monitor ................................... 22
Moving Object \ ................... 78
Multiple Flashes ................... 141
Multi-segment ........................ 98
Museum E ............................ 79
N
Night Scene (Bulb Mode) ....... 97
Night Scene A ...................... 79
Night Scene Portrait . .......... 78
Ni-MH ..................................... 37
Ni-MH rechargeable batteries ................................. 37
Nine-Image Display .............. 163
Noise Reduction ..................... 85
NTSC ................................... 214
12
258
12
O
4 button ........................19, 21
4 button when shooting ....103
Optical Preview ....................113
Optional Accessories ...........235
P
e (Program) Mode ................86
PAL ......................................214
Pet E ....................................79
PictBridge .............................193
Pixel Mapping .......................216
Pixels ....................................146
Playback ...........................25, 70
button .........................19, 21, 70
Playback display ..................172
[Q Playback] Menu ....158, 224
Playback Time ........................39
Portrait = ...............................78
Power .....................................48
Press fully ...............................59
Press halfway .........................59
Preview | ............................113
Preview Method ...................112
Print All Images ....................198
Print Service .........................190
Print Single Image ................196
Printer connection ................195
Program Mode e ...................86
Protect ..................................177
(Protect) button .......21, 177
P-TTL (Flash) .......................139
P-TTL Auto (Flash) ...............135
Q
Quality Level ..................43, 147
R
RAW .....................................148
| button ............19, 148, 149
RAW Display ........................ 185
RAW file format .................... 148
RAW+ .................................. 148
[A Rec. Mode] Menu .... 74, 224
Recorded Pixels ............. 43, 146
Red-eye reduction .......... 66, 139
Remaining image storage capacity .................................. 39
Remote Control .................... 120
Reset .................................... 219
Rotate .................................. 160
S
Saturation ............................. 144
Scene H .............................. 79
H (Scene) ........................... 79
SD Memory Card ................... 41
Select battery ....................... 215
Select&Delete ...................... 174
Self-timer .............................. 117
Sensitivity ............................... 83
K ......................................... 88
Sensor Cleaning .................. 233
Sepia (Digital Filter) ............. 183
[R Set-up] Menu .......... 202, 225
Shade (White Balance) ........ 150
Shake Reduction .................... 67
Shake Reduction switch ... 19, 68
Sharpness ............................ 144
Show Sensitivity ................... 104
Shutter Priority Mode b ........ 90
................................... 18, 21, 59
Shutter Speed ........................ 81
Single mode l ........ 102, 104
Slideshow ..................... 167, 169
Slim (Digital Filter) ................ 184
Slow Shutter Speed NR ......... 85
Slow-Speed-Sync ................ 131
Soft (Digital Filter) ................ 183
259
Spot Metering .........................99
sRGB ....................................155
Strap .......................................36
Sunset K .............................79
Superimpose AF Area ....28, 105
Surf & Snow i .....................79
Mode ......................................88
T
Text Size ..............................210
Toning ..................................144
Trailing curtain sync .............140
(White Balance) ....................150
TV .........................................179
b (Shutter Priority) mode ......90
U
USB cable ............................195
USB Connection ...................194
Using aperture ring ...............230
V
Video cable ..........................179
Video Output Format ............214
Viewfinder ........................27, 47
Vignetting .............................254
W
White Balance ......................150
Wireless Mode (Flash) .........136
World Time ...........................206
Z
Zoom Display .......................161
Zoom Lens .............................61
12
260
WARRANTY POLICY
All PENTAX cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by nonauthorized PENTAX service facilities.
12
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer. If there are no representatives of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner.
If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your PENTAX returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when
required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
261
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
The CE Mark is a Directive conformity mark of the European
Union.
12
262
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
12
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply.
The lithium battery used in this camera contains perchlorate material, which may require special handling.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We: PENTAX Imaging Company
A Division of PENTAX of America, Inc.
Located at: 600 12 Street, Suite 300
Golden, Colorado 80401 U.S.A.
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: PENTAX Digital Still Camera
Model Number: x
Contact person: Customer Service Manager
Date and Place: February, 2008, Colorado
Information on disposal for users
1. In the European Union
If your product is marked with this symbol, it means that used electrical/electronic products should not be mixed with general household waste. There exists a separate collection system for these products.
Used electric/electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Following the implementation by member states, private households within the EU states may return their used electrical/electronic equipment to designated collection facilities free of charge*. In some countries your local retailer may also take back your old product free of charge if you purchase a similar new one.
*Please contact your local authority for further details.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don’t purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
Memo
PENTAX Corporation
PENTAX Europe GmbH
(European Headquarters)
PENTAX U.K. Limited
PENTAX France S.A.S.
PENTAX Italia S.r.l.
2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.co.jp/)
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
112 Quai de Bezons, B.P. 204
95106 Argenteuil Cedex, FRANCE
(http://www.pentax.fr)
Via Dione Cassio 15, 20138 Milano, ITALY
(http://www.pentaxitalia.it)
PENTAX (Schweiz) AG Widenholzstrasse 1, 8304 Wallisellen, Postfach 367,
8305 Dietlikon, SWITZERLAND
(http://www.pentax.ch)
PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A.
(PENTAX Service Department)
12000 Zuni Street, Suite 100B Westminster, Colorado
80234, U.S.A.
(http://www.pentaximaging.com)
PENTAX Canada Inc.
PENTAX Trading
(SHANGHAI) Limited
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
23D, Jun Yao International Plaza, 789 Zhaojiabang Road,
Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn) http://www.pentax.co.jp/english
• Specifications and external dimensions are subject to change without notice.
53311 Copyright © PENTAX Corporation 2008
02-200802 Printed in Philippines
SLR Digital Camera
Operating Manual
For optimum camera performance, please read the Operating Manual before using the camera.
تنزيل
تم تحديث الرابط العام
رابط عام للمستند
إعلان