Kodak Automatic 35 B Instructions
Kodak Automatic 35B is a great choice for taking beautiful photos. It features automatic daylight exposure control, which sets the correct lens opening for you, making shooting faster, easier, and surer. It also has automatic flash exposure, eliminating computing and assuring good flash exposure. Just set the focus (5 to 25 feet), and the lens automatically adjusts to the correct opening. The built-in photoelectric exposure control sets the correct lens opening for you in daylight and flash pictures.
With its rugged, reliable Kodak construction, you can be sure that this camera will last for years to come. It's also easy to use, with a simple, straightforward design that makes it perfect for beginners and experienced photographers alike.
إعلان
إعلان
A U T O M A T I C
KodakSSB
C A M E R A
Your new Kodak Automatic 358 Camera ...
gives you correct exposure automatically for day l ight and flash pictures.
In addition to smart modern styling and rugged, reliable Kodak construction, its features inc l ude .
.
.
Automatic Daylight Exposur e-built-in photoelectric exposure co n trol sets the correct lens ope n ing for you. Because you don't have to determine exposure, it makes shooting faster, easier, surer.
Automatic Flash Exposur e-e l iminates computing and assures good flash exposure . Just set the focus (5 to 25 feet), and the lens automatically adjusts to the correct opening .
Automatic Zone Minder shows in the viewfinder if the lens is set for
CLOSE, GROUP, or
SCENE.
Before making any important pictures of a trip or some special event it is well to shoot a magazine of film outdoors, and indoors with flash .
This will give you practice in camera operation a nd provide a check on your equipment.
Kodak
A U T O M A T I C s s s
CAMERA
CONTENTS
Kodak Films 4
Loading 6
Unloading 8
Automatic Exposure Control ( Daylight) 9
Distance Settings 10
Low Light Indicator 12
Using the Viewfinder 12
Holding the Camera 13
Taking Pictures-Daylight 13
Flash Pictures 16
More About the Exposure Control 20
Photo Aids 22
Details of Kodak Automatic 35B Camera 23
IC
/
COLOR FILMS
KODAK FILMS
Kodachrome Film
For color transparencies, which can be projected on a screen or from which prints or enlargements can be made .
Two types are available : ( 1 ) The Kodachrome Film which has been supplied for many years( 2 ) Kodachrome II Film , which is faster , with improved sharpness and image quality . Either film , 2 0 or 36 exposures .
• Use Kodachrome Film for Daylight for daylight pictures .
• Use Kodachrome Film, Type F, for flash pictures with clear bulbs .
Use Kodachrome II Film for Daylight for both :
• p i ctures in daylight
• and flash pictures with blue flash bulbs .
Kodak ' Ektachrome Film
Like Kodachrome , Ektachrome Film produces lifelike color transparen cies for p r ojection or from which color prints and enlargements can be made . The speed of this film , however, is faster thzn both Kodachrome
Films. You can process Ektachrome film yourself or have it processed as described below .
Use Kodak Ektachrome Film for Daylight for exposure in dayli g ht , and Kodak Ektachrome Film, Type F, for pictures with clear flash bulbs .
2 0 exposures.
Kodak High Speed Ektachrome Film
W i th th i s new , extremely fast color film you can stop action in low illu mination and, at the same time, get faithful color rendition with exce llent definition. Available in Daylight Type and Type B. 20 exposures .
4 use Film Size
No . 135 Magazines
Kodacolor Film
The color film for color prints or transparencies.
Expose the same roll of film by daylight or clear flash. See below for processing. Enlargements as large as 11 by 14 inches can be ordered through your photo dealer. 20 exposures.
Your dealer can arrange to have the above color films processed by Kodak or any other laboratory offering such service tories, includin devic e this purpose. g
. Some labora-
Kodak, also provide direct mail service whereby you can mail exposed color film to the laboratory and have it returned directly to you. See your dealer for the special mailin g s required. Do not mail film without an overwrap or special mailing device intended for
BL.ACK-AND-WHITE FIL.MS
Kodak Panatom l c-X F il m
The film to use for bi g e nlar g ements when hi film s p ee d i s not a fa ct o r. It c ombi ne tremel y fin e d e t a i l. 2 0 or 36 exposures . g h s e xcep tionall y fine g rain a nd th e a bility to r eco rd e x-
Kodak P l u s-X P an Film
An e door x a ce ll e nt hi nd int e g h rior u sp ee se. d f
Th i e lm lo for gene r a l o ut w g l a r ge m e n ts. 20 o r 36 expos ur es . r a inin ess a nd h ig h re s o lvin g po we r p e rmit h ig h -q u a l ity en-
Kodak Trl-X Pan Film
A n extreme ly f as t pa n c hrom at i c fi l m o f m o d erate contrast , w i de ex p osure and deve l opment l at itud e, a n d co l o r sensitivity s uit able f or f l ash pict u res. 20 or 36 ex p osu r es.
Always in Subdued Light
Open the back by pushing the
LATCH BUTTON upward.
2
Push out the REWIND KNOB .
I
nsert
the film I118g8Zine in the
recess
next to the knob. Push the rewind knob III the way in, turning it slightly if necessary.
4
Swing out the RAPID WIND LEVER until the opening in the take up drum is up.
Insert the end of the film into the opening in the take-up drum. Swing out the rapid wind lever until the pins on the take up drum engage the film perforations and the film is wound halfway around the drum.
Close the back and make sure that it is latched.
6
Swing out the rapid wind lever until the mechanism locks-this takes several full strokes of the lever. The first frame of film will then be in position and the EXPO-
SURE COUNTER will be automatically set at "1." The counter will move a mark each time the film is advanced. It will show the number of exposu res made .
Note: Neither the exposure counter nor the shutter release will operate unless the film for exposure "1" is in position.
7
8
UNLOADING
f ~:~'~~ht
After the 20th or 36th exposure and before the back is opened, it is necessary to rewind the film into the magazine.
Pull the rewind
KNOB until you feel resistance (about Ys inch).
*
Push the rewind
RELEASE in its slot in the direction of the arrow and hold the rewind release while turning the rewind knob clockwise to wind the film toward the magazine.
While film is being rewound, a sma ll , round signal window on the bottom of the camera flashes alternately red and black. The film is completely rewound when, while turning the rewind knob, the signal window remains either red or black.
Open the camera back; this automatically returns the exposure counter to E
(Empty). Pull out the rewind knob all the way and remove the film magazine.
' Film will not rewind if the knob is pulled out too far . In this case, push in the knob completely : then pull it out the proper di s tance as indicated above.
AUTOMATIC EXPOSURE CONTROL
Daylight and
Available Light Pictures
Set Film Speed in ASA Window The small window, marked ASA, on the top of the camera, must show the daylight film speed
(exposure index) of the film in the camera to obtain proper exposure. The film speeds for
No. 135 Kodak Films can be found on the two Exposure Data Cards (under the heading
ASA) which can be slid out of the opening under the edge of the frame on the back of the camera, or in the instructions packed with the film. For example, the film speed of Kodachrome II Film for Daylight is 25 .
Set the film speed by turning the exposure index KNOB until the proper film speed appears opposite the arrow in the window, on the top of the camera, marked ASA.
9
Set Selector Ring at "OA YLlGHT" Press the selector ring LO C K and , at the same time , revolve the ring clockwise to snap-lock the green daylight arrow oppo site the green triangular INDEX. This automatically se l ects a shutter speed of 1 / 80 second .
DISTANCE SETTINGS
Handy Zone Focus -The focusing range of your camera is divided into three subject zones-each represented by a diamonds haped symbol on the lens mount. The diamond near 4 ft is the setting for CLOSE subjects, the diamond between 8 and 10 ft is the GROUP setting, the diamond between 25 and 50 ft is the SCENE setting. A
10
"Zone Minder," built into the viewfinder, shows at a glance which of the three zones is set on the focusing scale. Set the zone focus by rotating the LENS MOUNT until the proper diamond "click stops" opposite the focus INDEX. For example, the illustration shows the diamond mark for the GROUP zone set at the index mark.
The range of sharpness, which permits these zone settings, depends on the lens opening, as indicated by the red exposure meter NEEDLE, located in the curved window on the top of the shutter housing. The higher the / / number, the greater the range of sharpness. Zone settings will give acceptably sharp pictures at all three zones with //numbers f/5.6 or greater.
Careful Scale Focus -(I) When lighting conditions are such that an / / number less than / / 5.6 (1 / 4 or / / 2.8) is indicated in the curved window, setting the actual camera-to-subject distance on the focusing scale will give sharper pictures.
(2) With all flash pictures, setting the actual camera-to-subject distance on the focusing scale is necessary for proper focus and essential for proper exposure.
In both these cases, estimate the camera-to-subject distance carefully and rotate the lens mount until the figure representing the camera-to-subject distance is opposite the focus index. 11
LOW LIGHT INDICATOR
When the red exposure meter needle in the curved window moves into the red LOW LIGHT area at the extreme left of the window, it indicates insufficient available light to take a properly exposed picture and flash may be advisable. When the needle is in this area , it shows in the lower left corner of the viewfinder.
USING THE VIEWFINDER
Hold the camera close to your eye so that you can see the complete luminous view -fr ame. The image within this frame will be in the picture .
Note the parallax pointer on the right side, near the top of the view frame. When the camera is held hori-
12 zontally, this pointer indicates the
upper edge of the picture when the subject is 4 feet from the camera. An equivalent area eliminated at the top of the frame is added to the bottom of the frame.
Also seen in the viewfinder are two built-in signals the flash symbol, and either CLOSE, GROUP, or SCENE. The flash symbol indicates that the selector ring is set for flash, not daylight. The CLOSE, GROUP, or SCENE signal is the "Zone Minder," reminding you of the zone focus setting of the lens. 13
HOLDING THE CAMERA
The illustrations show two recommended ways of holding the camera.
Select a position that is convenient for you and assures steady camera holding while you press the EXPO-
SURE RELEASE. Do not obstruct the honeycomb-type exposure meter window or lens by your finger, or strap.
Don't face a main light so urce , such as the sun.
TAKING
The daylight film speed (exposure index) of the film loaded in the camera must be set in the window, marked ASA, on the top of the camera.
Make sure that the selector ring is locked at DAY-
LIGHT.
Rotate the lens mount to select the proper focus zone or camera-to-subject distance figure.
Sight through the viewfinder and compose the picture. Hold the camera close to your eye . Signals , provided in the viewfinder , show: (1) whether the camera is set for "Daylight" or "Flash ," (2) if there is sufficient light for proper exposure , and ( 3 ) the zone focus setti ng.
Hold the camera steady ; then press the shutter release all the way down with a slow, squeezing action. If the film has not been advanced to the next frame or if the film leader has not been wound off fully, you cannot press the shutter release.
To advance the film , swing out the rapid wind lever one full stroke or several short ones until it locks ; then let the lever return to its original position.
After the 20th or 36th exposure , and before opening the camera , the film must be rewound into the magazine. See Unloading, page 8.
FLASH PICTURES
Flasholders -
Flash pictures in black-and-white or color at distances of 5 to 25 feet are eas y to make. Just set the focus, and the correct len s opening is automatically set. Flash bulb s are fired when the camera shutter is released.
Synchronization-The camera shutter synchronizes flash bulbs , such as the AG-I ,
M-2 , M-5 , or M-25, and electronic flash
(requiring guide numbers of 35 or higher) .
The Kodak Automatic 35B Camera was designed to use flasholder s with Kodalite fittings such as the Kodalite Midget Flasholder, or Kodak
Supermite Flasholder. Attach the fla s holder to the camera by inserting the posts of the flasholder in the flash receptacles of the camera; then tighten the flasholder knob. Further instructions are packed with the flasholders .
SeHing the Flash Guide Number Flash guide numbers for Kodak films and flash bulbs are printed on the two Exposure Data Cards in the frame on the
16 back of the camera . Select the flash guide number for the film and flash bulb you
are using, then set this number on the camera as follows: Depress the selector ring
LOCK and revolve the selector RING counterclockwise until the blue flash arrowsnaplocks opposite the proper flash guide number on the lens mount
(if impossible to set, change focus setting). A guide number of 70 is set in the illustration.
Flash Exposures The flash exposure information provided in the Exposure Data
Cards app lie s to most flash situations. This information is based on exposures in an average-sized room with medium-light-colored walls.
Occasionally, however, flash pictures are taken under conditions which vary considerably from this standard, and better pictures will result if slight compensations are made. For example: With flash pictures in a small room with very light walls, better pictures are obtained by using the next higher guide number than recommended. Or, in very large rooms or outdoors , use the next lower guide number than recommended. 17
TAKING
F L
ASH PICTURES
Attach the flash older to the camera and insert a flash bulb in the reflector socket.
S et the Film S peed of the film loaded in the camera in the window labeled ASA. See Exposure
Data Cards or film instructions packed with Kodak films .
Set the Flash GuIde Number-Depress the selector ring LOCK and revolve the selector ring counterclockwise until the blue flash arrow snaplocks opposite the proper flash guide number on the lens mount. A shutter speed of 1/40 second is automatically set when the selector ring is set for "FLASH."
Focus the Camera Rotate the Lens Mount -
Selector Ring combination until the figure representing the camera-to subject distance in feet
(between 5 and 25 ) is opposite the focus index.
Be careful not to depress the selector ring lock while focusing.
NOTE : The focusing scale controls lens openings for fla s h in the 5 to 25-foot distance range , only . Distance limit s at which scale can be set are determined by the guide number.
Aim the Camera-Look through the viewfinder and compose the picture within the luminous viewframe of the viewfinder. The flash symbol should appear in the base of the view-trame-if not, check the setting of the selector ring.
NOTE : Disregard the possible appearance of the low light signal with nash pictures .
Release the Shutler-Hold the camera steady and press the shutter release down with a slow, sQueez ing action to take the picture. If film has not been advanced, or if film leader has not been wound off fully, you cannot press the shutter release.
Advance the Film-Swing out the rapid wind lever one full stroke, or several short ones, until it locks; then let the lever return to its original position. After the 20th or 36th exposure and before opening the camera, the film must be rewound into the magazine. See Unloading, page 8.
MORE ABOUT THE EXPOSURE CONTROL
With the se lector ring at DA YLJGHT, the photoelectric meter of the exposure control measures the over-all brightness of the light reflected by the subject.
Better results, especially with color films, are obtained when using flat or moderate side lighting with the principal illumination coming over your shoulder when taking the picture.
Scenes lacking great subject contrast: that is, when the differences in brightness between the dark and the bright areas are moderate , or when very bright and dark areas are of about the same size, but of equal picture interest, use the automatic exposure control without modification as described previously. Most pictures fall into this grouping.
Scenes with considerable subject contrast: for example, a person with light-colored clothing against a dark background.
A better exposed picture of the person may be obtained by making a "close-up" reading.
Move close to the subject so that the person fills the finder. Press down the shutter release until a slight resistance is felt about % of the way (not far enough to release shut-
20 ter); continue to hold the release in this position to maintain the exposure setting, then
step back and press the release down fu ll y to take the picture.
Modifying the ASA Setting : You may wish to slightly modify the recommended film speed (exposure index) to achieve a result which is more suitable for you. Using a higher speed results in denser transparencies, which some people prefer when using highwattage projectors and a small screen. A lower film speed gives lighter transparencies, for a low-wattage projector and large screen.
To modify the film speed setting when using filters with black-and-white films, divide the film speed by the filter factor ; use nearest film speed number.
CARE OF THE CAMERA
• Your Kodak Automatic 35B is a fine, ruggedly built camera, but yet a precision instrument. Protect it from dust and dirt and avoid rough handling. Use a rubber syringe to blowout any dust that may accumulate inside the camera. If the lens needs cleaning, first brush or blow away any grit or dust, then wipe the surface gently with Kodak Lens
Cleaning Paper. If necessary, use Kodak Lens Cleaner.
• Do not attempt to make any repairs or remove any parts from the shutter, lens, or camera . Never oil the shutter or any other parts of the camera. If you find that the camera requires service, return it to your photo dealer who will have repairs made locally, or send it to the Eastman Kodak Company. 21
PHOTO AIDS
Kodak Automatic 35 Fi , eld Case. This deluxe, top-grain leather case fits your camera and combines practical protection with dropawa y front convenience. Openings on the side of the case permit attaching the flasholder with the camera in its case.
Kodak Filters. The retaining ring on the lens mount of the camera unscrews to accept
Series 5 Kodak Filters and other len s attachments. Use a Kodak Skylight Fi lt er (No . IA) to add warmth to color pictures taken in the open shade or on overcast days. A Kodak
Daylight Filter for Kodak Type F Co lor Films (No. 85C) converts indoor (Type F) color films for outdoor use. A Kodak Daylight Filter for Kodak Type B Color Films
(No . 85B) converts Type B color films for outdoor use. There are a l so Kodak Filters for black-and-white films.
Other Lens AHachments. Kodak Portra Lenses, 1 +, 2+, and 3+, Series 5, extend the camera's picture-taking range down to 9% inches, len s -tos ubje ct distance, with an approximate field size of 4Ys x 7I,4 inch es. A Kodak Lens Hood, Series 5, is available .
Kodak Slide Projectors. The Kodak 500 Projector, Model B, and the Kodak Cavalcade Projector are compact , portable, ruggedly built projectors that show color slides big, bright, and sharp. The "500" is equipped with Re adymatic slide changer or a choice of two other changers. The Cavalcade is completely automa t ic. Just turn it on, and it
22 does the rest-changes slides automatically.
DETAILS OF KODAK AUTOMATIC 358 CAMERA
FILM
FILM SIZE-Kodak No. 135 , 20 or 36-exposure magazines
NEGATIVE SIZE-24 x 36mm
LENS
44mm, f / 2 .
S Kodak Ektanar
LENS OPENINGS-E / 2.S through E 32controlled by meter
COMBINATION LENS ATTACHMENTS-Use
Series 5 . Retaining ring suppned.
SHUTTER
KODAK AUTOMATIC FLASH SHUTTER-
Automatically set as film is advanced
SPEEDS" Dayli g ht " (l/ SO ) and " Flash"
( 1 / 40 ) se c ond
FLASH-Built in synchron i zation-Use No .
5 or 2 5 , M 2, AG 1 , M5 , or M25 flash bulbs at the " Flash" settin g, and Electronic flash
DOUBLE-EXPOSURE PREVENTION
Pt . No . 1611 2 8
EXPOSURE CONTROLS
Automatic for prevailing light-with photo e l ectric exposure control-ASA 10 to 320
Automatic for flash from 5 to 25 feet-Guide
Nos . 35 to 340
FOCUSING AND VIEWING
FOCUSING RANGE-3 feet to infinity-and zone focusi ng
VIEWFINDER-Optical , projected view frame type, with signals indicating "flash " setting , low l ig ht level and focus zone
OTHER
FEATURES
Sin g le Stroke Film Advance
Easy Drum Type Loading
Automatic Film Leader Wind Off
Tripod Socket-standard tripod thread
Exposur e Data Cards
Pr i nted i n the United Stat e s of Am eri ca
تنزيل
إعلان