advertisement
Y
Parts Included:
New Aeron ® Seat Replacement
Tools Required:
Wrench 10 mm T27 Torx Driver
6mm Drill Bit M6 Hex Bit Torque Wrench
Seat
Steps:
1. Remove shoulder bolt and nut.
Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y , Z , Aeron are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
2. Use torx driver and 10mm wrench.
Part no. 1BH1VR rev B.
1
3. Follow previous steps to remove other side shoulder bolt and nut.
4. Use 6mm drill to remove the bolt from the swing arm.
Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y , Z , Aeron are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1BH1VR rev B.
2
5. Remove the other side bolt to detach the seat
6. Detach the seat.
Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y , Z , Aeron are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1BH1VR rev B.
3
Re-Assembly Steps:
7. Replace the new seat in place.
8. Install bolts on both side.
Note: If the bolt housing has a paint mark, orient the paint mark upward.
Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y , Z , Aeron are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
9. Use torque wrench and
6mm hex bit. Torque each bolt to 250 in-lbs.
Part no. 1BH1VR rev B.
4
10. Install shoulder bolt and nut.
11. Use T27 torx driver and 10mm wrench to install shoulder bolt and nut.
12. Install shoulder bolt and nut on both side.
Z
© 2016 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
® Y , Z , Aeron are among the registered trademarks of Herman Miller, Inc.
TM Sense, Setu, and Tu are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1BH1VR rev B.
5
advertisement
Related manuals
advertisement