advertisement
Always there to help you
Register your product and get support at www.philips.com/welcome
Contact
Philips
SBT310/37
User manual
2
Contents
1 Important
2 Your Bluetooth Speaker
3 Get started
4 Play
5 Product information
6 Troubleshooting
EN
3
1 Important
4
EN
Safety
Know these safety symbols
This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Important Safety instructions
a
Read these instructions.
b
Keep these instructions.
c
Heed all warnings.
d
Follow all instructions.
e
Do not use this apparatus near water.
f
Clean only with dry cloth.
g
Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
h
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
j
Only use attachments/accessories specified by the manufacturer.
k
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. l
Unplug this apparatus during lightning storms or when unused for long periods of time. m
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
n
Battery usage CAUTION – To prevent battery leakage which may result in bodily
injury, property damage, or damage to the unit:
• Install all batteries correctly, + and - as marked on the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
o
Apparatus shall not be exposed to dripping or splashing. p
Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
q
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device, the disconnect device shall remain readily operable.
Warning
•
Never remove the casing of this apparatus.
•
Never lubricate any part of this apparatus.
•
Never place this apparatus on other electrical equipment.
Notice
Any changes or modifications made to this device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
Caution: Changes or modifications made to this equipment not expressly approved by
Philips may void your authorization to operate this equipment.
FCC & RSS compliance statement:
This device complies with Industry Canada licence-exempt RSS standard(s) and Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
( French )
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence et la partie 15 des
Règles FCC. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
RF Exposure info
This equipment complies with FCC’s and IC's
RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.
( French )
Cet appareil est conforme aux limites d’exposition au rayonnement RF stipulées par la FCC et l’IC pour une utilisation dans un environnement non contrôlé. Les antennes utilisées pour cet émetteur doivent être installées et doivent fonctionner à au moins 20 cm de distance des utilisateurs et ne doivent pas être placées près d’autres antennes ou
émetteurs ou fonctionner avec ceux-ci. Les installateurs doivent s’assurer qu’une distance de 20 cm sépare l’appareil (à l’exception du combiné) des utilisateurs.
FCC Section 15.105 statement:
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
EN
5
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
ICES-003 complies statement
This Class B digital apparatus complies with
Canadian ICES-003.
( French )
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
The correct disposal of these products helps prevent potentially negative consequences on the environment and human health.
Your product contains batteries, which cannot be disposed of with normal household waste.
Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially
6
EN negative consequences on the environment and human health.
Please visit www.recycle.philips.com for additional information on a recycling center in your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
The making of unauthorized copies of copyprotected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence.
This equipment should not be used for such purposes.
Note
•
The type plate is located on the bottom of the apparatus.
2 Your Bluetooth
Speaker
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Introduction
With this speaker, you can enjoy audio from the compatible Bluetooth device or other audio devices.
What's in the box
Check and identify the contents of your package:
• Main unit
• 1 x Adaptor
• Quick start guide f g h a
Overview of the main unit
• Switch the speaker between standby mode and working mode.
a b c d e b
/
• Adjust volume.
• Adjust time.
c
• In automatic standby mode:press for 2 seconds to wake up your speaker.
• In standby mode: press for over 2 seconds to start time set.
• Press repeatly to select different levels of display brightness when the AC power cord is plugged in.
• Press for 8 seconds to erase all pairing information.
d
DC IN 5V 1A
• Power supply socket e
MP3-LINK
• Connect an audio device.
f
Bluetooth indicator
• Steadily on when the speaker is connected with Bluetooth compatible device.
• Flashes when disconnected Bluetooth pairing .
g
Display screen
• Display time.
h
Battery level indicator
• Flashes when the battery level is low
EN
7
8
EN
3 Get started
Caution
•
Use of controls, adjustments, or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect power
This Bluetooth speaker can be powered by either AC power or batteries.
Battery power
Warning
•
Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
•
The battery contains chemical substances, so it should be disposed of properly.
•
Keep children away from the battery.
1
Open the battery compartment.
2
Insert AA batteries with correct polarity
(+/-) as indicated.
3
Close the battery compartment.
Caution
AC power
•
Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the speaker.
Connect the AC power adaptor to:
• the power supply socket on the back of the speaker.
• the wall power outlet.
Turn on
• Slide on the speaker to the right.
»
The Bluetooth indicator flashes (blue).
Switch to standby mode
The speaker switches to standby mode automatically in the following situations.
• In Bluetooth mode: no audio signal from your Bluetooth device over 15 minutes.
• In MP3 link mode: no audio signal detected over 15 minutes.
• The battery level is low.
Note
•
The Bluetooth connection will be terminated when the speaker enters standby mode, you can wake up the speaker by holding for 2 seconds.
You can also switch your speaker to standby mode manual by sliding to the left.
4 Play
Play from a Bluetooth device
You can listen to a Buetooth device through this speaker.
Note
•
The effective operation range between the speaker and your Bluetooth device is approximately 10 meters
(30 feet).
o
DoD
1
Slide to the right to turn on Bluetooth function of the speaker.
»
The Bluetooth indicator flashes.
2
Activate the Bluetooth function in your
Bluetooth device (see the device user manual).
3
Select "PHILIPS SBT310" on your device for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator stays steadily on.
• For elder devices, you need to input
"0000" as pairing password.
4
Start music play on your Bluetooth device .
PHILIPS SBT310 PIN
0000
EN
9
10 EN
Play from a PC
You can also listen to audio through Bluetooth in PC.
Note
•
Make sure that you have installed Bluetooth driver in your PC before pairing.
•
The steps below are only for windows 7 operating system. If you use other OS/IOS , refer to other OS/
IOS help.
1
Slide to the right to turn on Bluetooth function of the speaker.
»
The Bluetooth indicator flashes.
2
Activate the Bluetooth function in your PC.
3
Add a Bluetooth device in your PC and select "PHILIPS SBT310" for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator steadily on.
4
Set "PHILIPS SBT310" as default communication device in your PC.
1). Right click the speaker icon ( ) in the lower right corner of the Windows home screen and select "Playback Devices" from the option menu
2). Right click desired speaker and select
"Set as Default communnication Device".
5
Start music play on your PC .
Play from an external device
You can also listen to an external audio device through this speaker.
Note
•
Your speaker can play under MP3-LINK audio only when the Bluetooth paused or stopped.
1
Connect the MP3-LINK cable to:
• the MP3-LINK jack (3.5mm) on the back of the speaker.
• the headphone jack on an external device.
2
Start to play on the device.
Control play
During play,
• press VOL +/- to increase or decrease the volume level.
Adjust brightness
Note
•
You can adjust display brightness only when the AC power cord is plugged in.
Note
Press repeatedly to select different levels of display brightness.
Set time
•
You can set time only when the speaker is in standby mode.
1
Slide the left.
2
Hold on the speaker for more than two seconds.
»
[12] begins to blink.
3
Press to confirm.
» The hour digits begin to blink.
4
Press / to set hour.
5
Repeat steps 3-4 to set minute.
There is a spot on the lower right corner of the screen.
• The spot lights off when the time set before 12:00 at noon.
• The spot lights on when the time set after
12:00 at noon.
5 Product information
Note
•
Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output Power
Signal to Noise Ratio
Aux-in Link
2 x 2 W RMS
>67 dB
600 mV RMS 20 kohm
Bluetooth
Bluetooth version V2.1+ EDR
Frequency band 2.402-2.480 GHzISM Band
Rang 10m (free space)
General information
AC power (power adaptor)
Model:
ASUC12A-050100
Input: 100-240V~,
50/60Hz, 0.3A;
Output: 5V 1A;
3W Operation Power
Consumption
Standby Power
Consumption
Dimensions - Main Unit
(W x H x D)
Weight- Main Unit
<1W
300 x 116 x
156mm
1.2 kg
EN
11
6 Troubleshooting
Warning
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby and the model number and serial number are available.
No power
• Make sure that the AC power plug of the speaker is connected properly.
• Make sure that there is power at the AC outlet.
• Make sure that the batteries are inserted correctly.
No sound
• Adjust the volume.
No response from the speaker
• Restart the speaker.
12 EN
EN
13
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
SBT310_37_UM_V1.0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement