User manual

Turn on

• Slide on the speaker to the right.

»

The Bluetooth indicator flashes (blue).

Switch to standby mode

The speaker switches to standby mode automatically in the following situations.

• In Bluetooth mode: no audio signal from your Bluetooth device over 15 minutes.

• In MP3 link mode: no audio signal detected over 15 minutes.

• The battery level is low.

Note

•

The Bluetooth connection will be terminated when the speaker enters standby mode, you can wake up the speaker by holding for 2 seconds.

You can also switch your speaker to standby mode manual by sliding to the left.

4 Play

Play from a Bluetooth device

You can listen to a Buetooth device through this speaker.

Note

•

The effective operation range between the speaker and your Bluetooth device is approximately 10 meters

(30 feet).

o

DoD

1

Slide to the right to turn on Bluetooth function of the speaker.

»

The Bluetooth indicator flashes.

2

Activate the Bluetooth function in your

Bluetooth device (see the device user manual).

3

Select "PHILIPS SBT310" on your device for pairing.

» The speaker gives out 2 beeps and the

Bluetooth indicator stays steadily on.

• For elder devices, you need to input

"0000" as pairing password.

4

Start music play on your Bluetooth device .

PHILIPS SBT310 PIN

0000

EN

9