DANGER

READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT.

Failure to follow these safety instructions may result in ELECTRICAL SHOCK,

EXPLOSION, FIRE, which may result in a SERIOUS INJURY, DEATH, or PROPERTY

DAMAGE.

Electrical Shock.

Product is an electrical device that can shock and cause serious injury. Do not submerge in water or get wet.

Explosion.

Never short-circuit the battery terminals. Do not use with an incompatible charging device. Do not attempt to jump start, charge, or discharge the battery if damaged or frozen.

Never charge or discharge the product outside its operating temperatures. Never over-charge or over-discharge the battery. Never exceed the maximum charging currents of the battery. Never incinerate.

Fire.

The product is an electrical storage device that can emit heat. Do not cover product or place objects on top of the product. Keep the product away from combustible materials.

Eye Injury.

Wear eye protection when operating product. Batteries can explode and cause flying debris. In the case of contamination of eyes or skin, flush affected area with running clean water and contact poison control immediately.

User Guide & Warranty

For more information and support visit:

Important Safety Warnings

Proposition 65. WARNING: This product can expose you to chemicals including lead and exhaust fumes, which are known to the

State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.

ca.gov. Personal Precaution.

Only use the product as intended. In case of an emergency, have someone nearby while using this product. Wear complete eye protection and protective clothing while working near a battery. Always wash hands after handling batteries and related materials. Do not handle or wear any metal objects when working with batteries, including; tools, watches, or jewelry. If metal is dropped onto the battery, it may spark or create a short-circuit resulting in electrical shock, fire, explosion, which may result in injury, death, or property damage. Minors. If the product is intended by "Purchaser" to be used by a minor, the purchasing adult agrees to provide detailed instructions and warnings to any minor before use. The "Purchaser" agrees to indemnify NOCO for any unintended use or misuse by a minor. Choking Hazard.

Accessories for the product may present a choking hazard to children. Do not leave children unattended with the product or any accessory. The product is not a toy. Handling.

Handle the product with care.

The product can become damaged if impacted. Do not use a damaged product, including, but not limited to, cracks to the casing.

Humidity and liquids may damage the product. Do not handle products or any electrical components near any liquid. Store product in dry locations. Do not operate the product if it becomes wet. If the product is already operating and becomes wet, discontinue use immediately. Modifications. Do not attempt to alter, modify, or repair any part of the product. Disassembling the product may cause injury, death, or damage to property. If the product becomes damaged, malfunctions or comes in contact with any liquid, discontinue use, and contact NOCO. Never disable the internal battery management system (BMS) for any reason. Any modifications to the product void your warranty.

Operating. The operating temperature range is -4ºF (-20ºC) to 140ºF (60ºC). The charging temperature range is

14ºF (-10ºC) to 122ºF (50ºC). Do not operate outside of the recommended temperature ranges. Storage.

The recommended storage temperature range is -4ºF (-20ºC) to 140ºF (60ºC). Never exceed 140ºF (60ºC) under any circumstances. For optimal longevity, store at

77ºF (25ºC) and a state-of-charge (SOC) higher than seventy-percent (70%). The storage self-discharge rate is less than five-percent

(5%) per month. It is not recommended to store the battery for more than 6 months without charging. Ventilation. The product does not release gas during regular use, so there are no specific ventilation requirements. However, it is crucial to minimize temperature extremes or restricting airflow to the product. A minimum of 0.50” (12.7 mm) of space should be kept around the product to allow for adequate airflow. Disposal. The product must be recycled or disposed of separately from household waste. Disposal of the product in household

trash is unlawful under state and federal environmental laws and regulations. Always take the product to your local battery recycling center. Retrofit.

Lithium-ion batteries weigh substantially less than lead-acid batteries of comparable capacity. Some equipment is designed to utilize the weight of lead-acid batteries to achieve weight distribution. Using the product as a replacement battery could impact the weight distribution of the equipment. Understand the consequences of modified weight distribution and ensure safe weight distribution. You assume all responsibility and liability for any damages, injuries, or accidents that may occur due to degraded stability.

Charging. The product is a 12-volt lithium-ion battery. Do not use a charger that utilizes a pulse charge or a desulfation feature. For optimal performance, we recommend only using the 12-volt lithium mode on NOCO Genius chargers. If using a third-party charger, it must be compatible with 12-volt Lithium Iron Phosphate (LiFePO4) batteries with a charging voltage of 14.6-volts, and be certified under one or more of the following standards: IEC60601, UL1236, RCM, PSE or CE (LVD, EMC). Be cautious of using low-quality chargers, as they may present a severe electrical risk that can result in injury to person and property, as well as shorten the life of the product and cause the product to malfunction. NOCO is not responsible for the user’s safety when using accessories or chargers that are not approved by NOCO. During charging, if the battery becomes excessively warm, deforms, swells, or emits smoke or odor, discontinue use immediately and contact support. Connections. Make sure all connections to the product are secure. Use 70-90 inch-pounds of torque to secure the connections properly. Loose connections may cause reduced performance and increased heat due to resistance that may cause the melting of the enclosure or potentially a fire. Medical Devices.

The product may emit electromagnetic fields.

The product contains magnetic components that may interfere with pacemakers, defibrillators, or other medical devices. Consult with your physician before use if you have any medical device. If you suspect the product is interfering with a medical device, stop using the product immediately, and consult your physician. Cleaning.

Disconnect and remove the product before cleaning. Immediately dry the product if it comes in contact with liquid or any contaminant. Use a soft, lint-free (microfiber) cloth. Do not use a pressure washer to clean the battery. Explosive Atmospheres. Obey all signs and instructions. Do not operate the product in any area with a potentially explosive atmosphere, including fueling areas or areas which contain chemicals or particles such as grain, dust, or metal powders. High-Consequence Activities.

Do not use the product where the failure of the product could lead to injury, death, or severe environmental damage. Radio Frequency Interference.

This product complies with regulations governing radio frequency emissions. Such emissions from the product may negatively affect the operation of other electronic equipment, possibly causing them to malfunction.

EN

Installation

Before installing the product, make sure it's fully charged. Visually inspect the product for any signs of damage (e.g., cracks, dents).

Make sure the battery terminals are free from dirt, oxidation, or corrosion. Install the product in any horizontal or vertical orientation, except with the terminals facing downward. Follow the below steps for the installation process:

1.

Remove the original battery following the manufacturer's guidelines.

2.

Compare the height of the original battery to the product. If the original battery dimensions are larger than the product, use the included spacers and foam to adjust the height to match the original battery as closely as possible. For more information on fitment, see our battery fitment guide.

3.

Securely fasten the battery to the battery tray/box, making sure the battery cables reach both battery terminals.

4.

Using the included fastening hardware, attach the positive (+) battery cable to the positive (+) battery terminal and the negative (-) battery cable to the negative (-) battery terminal. Make sure the battery cables connect to the correct polarity.

5.

Securely fasten to the battery by using 70-90 inch-pounds of torque. Do not overtighten.

Battery Fitment

The following table provides the battery fitment and the corresponding spacers and foam needed to achieve proper height, width and length for retrofit applications.

Model

NLP5

NLP9

NLP14

NLP20

NLP30

Battery Fitment

BTZ5S

BTX4L-BS

BTX5L-BS

BTX7L-BS

BTX7A-BS

BTX9-BS

BTX12-BS

BTX14-BS

BTX16-BS

B16A-AB

BTZ10S

BTX20L-BS

B50-N18L-A3

B16CL-B

BTX30L

Spacers

None

None

(1) 20mm

(1) 20mm, (1) 24mm

None

(1) 12.5mm

(1) 12.5mm, (1) 25mm

(2) 25mm

(1) 17mm, (2) 25mm

(1) 12.5mm, (3) 25mm

None

(1) 12mm, (1) 15mm

(2) 15mm, (4) 7.5mm Foam

(3) 15mm, (3) 7.5mm Foam

None

EN

Troubleshooting

Dynamic BMS.

The product utilizes a dynamic Battery Management System (BMS) that monitors the internal lithium-ion cells and disconnects them if a fault occurs. The BMS protects against over-charge, over-discharge, over-current, short-circuit, over-temperature, and undertemperature fault conditions. The BMS also includes cell balancing to maintain voltage balance between individual cells to ensure optimal battery performance. The BMS automatically recovers from fault conditions without user intervention.

In extremely cold temperatures, the battery may be slow to provide power initially. If this occurs, attempt to start the equipment again.

Repeated attempts will self-heat the lithium cells and allow them to provide sufficient power. In order to protect the lithium cells, the

BMS will not allow charging below -10ºC (14.0°F). Once the battery temperature reaches -10ºC (14.0°F) or higher, charging will be allowed.

In order to protect the lithium cells, the BMS will not allow charging or discharging when the battery temperature reaches 60ºC

(140°F). This situation can occur with high ambient temperature and repeated starting attempts which self-heat the battery. Once the battery cools the BMS will allow charging and discharging.

Protection

Over-Charge

Over-Discharge

Over-Current

Short-Circuit

Over-Temperature

Under-Temperature

Recovery Process

Recovers when an external load is applied.

Recovers when a charger is applied.

Recovers when an external load is removed.

Recovers when an external load is removed.

Recovers when returning to its operating temperature range.

Recovers when returning to its operating temperature range.

Charging

To recharge the product, connect a compatible lithium-ion charger to the positive (+) and negative (-) battery terminals. The recommended charging voltage is 14.6-volts. The product uses advanced lithium-ion technology that allows for the rapid charging of the internal lithium-ion cells. This is a table of the charging times, based on 100% depth-of-discharge (DOD), using recommended

NOCO Genius Smart Battery Chargers:

Recharge Times Using NOCO GENIUS Chargers.

NLP5

NLP9

NLP14

NLP20

NLP30

GENIUS1

2hr

3hr

4hr

7hr

8hr

GENIUS2

1hr

1.5hr

2hr

3.5hr

4hr

GENIUS5

24min

36min

48min

1.4hr

1.6hr

GENIUS10

-

-

24min

42min

48min

EN

Technical Specifications

BCI Size

Type

Chemistry

Nominal Voltage (V)

Amp-Hours

Watt-Hours (Wh)

Starting Current

Continuous Current

Charging Voltage (V)

Charging Current (A)

Operating Temperature

Charging Temperature

Storage Temperature

Housing Protection

Dimensions: Inches (cm)

Weight: Lbs (kg)

NLP5 NLP9

5

2

25.6

250

20A

14.6V

9

Lithium - Ion

Lithium Iron Phosphate (LiFePO4)

12.8

3

38.4

400

30A

9A (Max) 6A (Max)

-20ºC to 60ºC

-10ºC to 50ºC

-20ºC to 60ºC

IP66 waterproof rated

3.35x4.45x2.76

(8.5x11.3x7.01)

1.5 (0.69)

3.66x5.87x3.43

(9.29x14.9x8.71)

2.29 (1.03)

NLP14

14

4

51.2

500

40A

12A (Max)

NLP20

20

7

89.6

600

70A

21A (Max)

3.66x 5.87x3.43

(9.29x14.9x8.71)

2.58 (1.17)

5.0x6.9x3.4

(12.7x17.5x8.6)

3.73 (1.7)

NLP30

30

7.8

99.84

700

80A

24A (Max)

7.0x6.5x5.0

(17.7x16.5x12.7)

5.0 (2.27)

NOCO Five (5) Year Limited Warranty.

NOCO warrants that this product (the “Product”) will be free from defects in material and workmanship for a period of Five (5) Years from the date of purchase (the “Warranty Period”). For defects reported during the Warranty Period, NOCO will, at its discretion, and subject to NOCO’s technical support analysis, either repair or replace defective products. Replacement parts and products will be new or serviceably used, comparable in function and performance to the original part and warranted for the remainder of the original

Warranty Period.

NOCO’S LIABILITY HEREUNDER IS EXPRESSLY LIMITED TO REPLACEMENT OR REPAIR. TO THE MAXIMUM EXTENT PERMITTED

BY LAW, NOCO SHALL NOT BE LIABLE TO ANY PURCHASER OF THE PRODUCT OR ANY THIRD PARTY FOR ANY SPECIAL,

INDIRECT, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, PROPERTY DAMAGE

OR PERSONAL INJURY, RELATED IN ANY WAY TO THE PRODUCT, HOWSOEVER CAUSED, EVEN IF NOCO HAD KNOWLEDGE

OF THE POSSIBILITY OF SUCH DAMAGES. THE WARRANTIES SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND THOSE ARISING FROM COURSE OF DEALING, USAGE OR

TRADE PRACTICE. IN THE EVENT THAT ANY APPLICABLE LAWS IMPOSE WARRANTIES, CONDITIONS OR OBLIGATIONS THAT

CANNOT BE EXCLUDED OR MODIFIED, THIS PARAGRAPH SHALL APPLY TO THE GREATEST EXTENT ALLOWED BY SUCH LAWS.

This Warranty is made solely for the benefit of the original purchaser of the Product from NOCO or from a NOCO approved reseller or distributor and is not assignable or transferable. To assert a warranty claim, the purchaser must: (1) request and obtain a return merchandise authorization (“RMA”) number and return location information (the “Return Location”) from NOCO Support by emailing [email protected] or by calling 1.800.456.6626; and (2) send the Product, including RMA number, and receipt to the Return Location.

DO NOT SEND IN PRODUCT WITHOUT FIRST OBTAINING AN RMA FROM NOCO SUPPORT.

The original purchaser is responsible (and must prepay) all packaging and transportation costs to ship products for warranty service.

EN

NOTWITHSTANDING THE ABOVE, THIS HASSLE-FREE WARRANTY IS VOID AND DOES NOT APPLY TO PRODUCTS THAT: (a) are misused, mishandled, subjected to abuse or careless handling, accident, improperly stored, or operated under conditions of extreme voltage, temperature, shock, or vibration beyond NOCO’s recommendations for safe and effective use; (b) improperly installed, operated or maintained; (c) are/were modified without the express written consent of NOCO; (d) have been disassembled, altered or repaired by anyone other than NOCO; (e) the defects of which were reported after the Warranty Period.

THIS HASSLE-FREE WARRANTY DOES NOT COVER: (1) normal wear and tear; (2) cosmetic damage that does not affect functionality; or (3) Products where the NOCO serial number is missing, altered, or defaced.

HASSLE-FREE WARRANTY CONDITIONS

These conditions apply only to product during the warranty period. The Hassle-Free Warranty is void either by elapsed time from date of purchase (elapsed time from serial number date, if no proof of purchase) or from the conditions listed earlier in this document.

Return product with the appropriate documentation.

With Receipt:

5 Year: No charge. With proof of purchase, the warranty period begins on date of purchase.

With NO Receipt:

5 Year: No charge. With no proof of purchase, the warranty period begins on the serial number date.

We recommend registering your NOCO product in order to upload proof of purchase and extend your effective warranty dates. You may register your NOCO product online at: no.co/register. If you have any questions regarding your warranty or product, contact NOCO

Support (email and phone number above) or write to: The NOCO Company, at 30339 Diamond Parkway, #102, Glenwillow, OH 44139

USA.

NLP10122022B

12V 2Ah NLP5

INSANE PERFORMANCE.

LITHIUM POWERSPORT BATTERY.

TM

2X

MORE POWER.

10X

MORE STARTS.

5X

LONGER LIFE.

DYNAMIC BMS.

Equipped with an auto-enabled, advanced battery management system that provides maximum protection, performance, and bi-directional cell equalization for long-lasting stability. No BMS reset needed.

ACTIVE PROTECTION.

Protects against over-charge, extreme-heat, short-circuit, over-discharge, extreme-cold, and over-current.

SHOCK ABSORPTION.

Designed with a custom rubber dampening base and foam inserts to extend the life of the battery and keep connections secure.

no.co

UNIVERSAL MOUNTING.

Modular spacers can be added to alter the size and allow the battery to be safely and securely mounted. A removable mounting block allows the battery to fit more applications.

The threaded insert enables direct-mounting for additional simplicity and security.

Removable

Mounting Block

Threaded Insert

M6-1 Thread Size.

Hex Screw

M6-1x16mm

FEMALE.

TOP.

SIDE.

FRONT.

COMPATABLE SIZES.

BCI SIZES

BTZ7S

BTZ8V

BTX4L-BS

BTX5L-BS

BTX7L-BS

BTZ5S

YUASA SIZES

YTZ7S

YTZ8V

YTZ5S-BS

YTX4L-BS

YTX5L-BS

YTX7L-BS

ETX SIZES

No Compatable Sizes.

MULTI-CONNECTION TERMINALS.

Equipped with premium IP66 waterproof copper PCB plates. NLP Terminals can be mounted from the front, side, or top, and can be removed altogether depending on the application.

NLP5 Battery

20mm Spacer

24mm Spacer

WHAT'S IN THE BOX

3.4"

(88mm)

*Accessories not to scale with NLP5

EXPLOSION, FIRE, which may result in a SERIOUS INJURY, DEATH, or PROPERTY

DAMAGE.

DAMAGE.

Electrical Shock.

Product is an electrical device that can shock and cause serious injury. Do not submerge in water or get wet.

User Guide & Warranty

Electrical Shock.

Product is an electrical device that can shock and cause serious injury. Do not submerge in water or get wet.

Never short-circuit the battery terminals. Do not use with an incompatible charging

User Guide & Warranty over-discharge the battery. Never exceed the maximum charging currents of the battery. Never incinerate.

Never charge or discharge the product outside its operating temperatures. Never over-charge or over-discharge the battery. Never exceed the maximum charging currents of the battery. Never incinerate.

DAMAGE.

objects on top of the product. Keep the product away from combustible materials.

Electrical Shock.

Eye Injury.

Product is an electrical device that can shock and cause serious injury. Do not

Wear eye protection when operating product. Batteries can explode and cause flying

Explosion.

Never short-circuit the battery terminals. Do not use with an incompatible charging

The product is an electrical storage device that can emit heat. Do not cover product or place

For more information

Eye Injury.

Wear eye protection when operating product. Batteries can explode and cause flying and contact poison control immediately.

For more information and support visit:

Never charge or discharge the product outside its operating temperatures. Never over-charge or over-discharge the battery. Never exceed the maximum charging currents of the battery. Never

Fire.

The product is an electrical storage device that can emit heat. Do not cover product or place objects on top of the product. Keep the product away from combustible materials.

Eye Injury.

Wear eye protection when operating product. Batteries can explode and cause flying and contact poison control immediately.

4.5"

(113mm)

(1) 0.8" 20mm Spacer

User Guide

DANGER

Failure to follow these safety instructions may result in ELECTRICAL SHOCK,

DAMAGE.

Electrical Shock.

Product is an electrical device that can shock and cause serious injury. Do not submerge in water or get wet.

Explosion.

Never short-circuit the battery terminals. Do not use with an incompatible charging device. Do not attempt to jump start, charge, or discharge the battery if damaged or frozen.

Never charge or discharge the product outside its operating temperatures. Never over-charge or over-discharge the battery. Never exceed the maximum charging currents of the battery. Never incinerate.

Fire.

The product is an electrical storage device that can emit heat. Do not cover product or place objects on top of the product. Keep the product away from combustible materials.

Eye Injury.

Wear eye protection when operating product. Batteries can explode and cause flying and contact poison control immediately.

User Guide & Warranty

Hex Key

2.8"

(70mm)

LxWxH Minimum.

4.5” x 2.8” x 3.4”

(113mm x 70mm x 88mm)

LxWxH Maximum.

4.5” x 2.8” x 4.3”

(113mm x 70mm x 132mm)

(1) 0.9" 24mm Spacer

RAPID RECHARGE.

Use the Lithium mode on a Genius charger to fully recharge an NLP battery in minutes. See Genius models and charging times below.

RECHARGE TIME

GENIUS1 120 Minutes

GENIUS2

GENIUS5

GENIUS10

60 Minutes

24 Minutes

N/A

TECHNICAL SPECIFICATIONS

BCI SIZE: 5

CHEMISTRY: Lithium Iron Phosphate (LiFePO4)

NOMINAL

VOLTAGE:

12.8

AMP-HOURS:

WATT-HOURS (WH):

STARTING

CURRENT:

CHARGING

VOLTAGE (V):

CHARGING

CURRENT (A):

OPERATING

TEMPERATURE:

CHARGING

TEMPERATURE:

STORAGE

TEMPERATURE:

2

25.6

250

14.6V

6A (Max)

-20ºC to 60ºC

-10ºC to 50ºC

-20ºC to 60ºC

WEIGHT: 1.5 lbs

(0.69 kg)

VOLUMETRICS: Retail Packaging:

Dimensions:

5.87” x 4.17” x 4.65”

Weight: 2.44 lbs

UPC: 0-46221-19007-6

Inner Carton:

Dimensions:

6.02” x 4.37” x 5.04”

Weight: 2.56 lbs

Master Carton:

Dimensions:

13.50” x 6.18” x 10.63”

Weight: 15.93 lbs

Quantity: 6

UCC: 10046221190073

Units Per Pallet:

378 Units

no.co