Poly Voyager Free 60 UC True Wireless Earbuds User Guide
Add to My manuals24 Pages
Poly Voyager Free are a pair of wireless earbuds that come with a basic charging case. Key features of the device include the ability to connect to your mobile phone and computer, as well as the ability to use sensors to control features such as volume and music playback. The earbuds also have a built-in microphone for making and taking calls, and they come with a variety of eartips to ensure a comfortable fit.
advertisement
▼
Scroll to page 2
of
24
Voyager Free 60 UC True Wireless Earbuds with Basic Charge Case User Guide Contents Your earbud system 3 Earbud button controls 4 Earbud swipe sensor controls 5 USB Bluetooth adapter 6 Load software 7 Update your Poly device 7 Fit 8 Replace eartips 8 Charge 9 Check battery level 9 Quick charge 10 Wireless charging (Qi charging) 10 Power 11 Power on/off your earbud system 11 DeepSleep mode 11 Connect and pair 12 Pair to mobile device 12 Connect to PC 12 Pair mode 13 The basics 14 Adjust the volume 14 Play or pause audio 14 Voice assistant (smartphone feature) 14 Use sensors 15 ANC and Transparency Mode 15 Launch Microsoft Teams (Teams model only) Make/Take/End Calls 16 Make a call 16 Answer or end a call 16 Mute 16 Answer a second call 16 Redial last outgoing call (smartphone feature) Answer calls from a second device 16 More Features 17 Customize your earbud swipe settings 17 ANC and Transparency Mode settings 17 Connect new earbud 18 Troubleshooting 19 Pairing 19 Audio 19 Calls 20 General 21 Safety warnings 22 Safety Instructions 22 Support 24 15 16 Your earbud system Your earbud system easily connects to your mobile phone and computer. The system includes: • Wireless earbuds with wearing sensors • USB Bluetooth adapter for connection to high-fidelity computer audio (design varies by model) • Charge case with battery-status LEDs • Soft case with a pocket for your USB Bluetooth adapter and charge cable 3 Earbud button controls Press an earbud button to control features on your earbud system. To press the raised button on the back of your earbud, pinch the earbud with your thumb and forefinger. Control features using either earbud's button. Note: Do not press the buttons on both earbuds at the same time. Your earbud features may not function properly. :04 Siri/Google Assistant Siri/ Google Assistant :02 Control Button action Call answer/end Click once Bluetooth pairing Press and hold for 4 seconds. For more, see Pair to mobile device. Pause/play media * Click once Microsoft Teams With earbuds idle, click to interact with Microsoft Teams (requires Teams model and Teams desktop app). Default phone assistant Press and hold for 2 seconds Note: *Functionality varies by application. May not function with web-based apps. 4 Earbud swipe sensor controls Swipe forward or backward on the earbud swipe sensor to control features on your earbud system. The swipe sensor is next to metallic windscreen on the top of each earbud stem. Swipe forward or backward to adjust levels or make changes. Control by swiping either earbud. Note: Do not press the buttons on both earbuds at the same time. Your earbud features may not function properly. By default, your earbud swipe controls vary by activity. To customize these settings, see Customize your earbud swipe settings. Control Activity Swipe sensor gesture Volume up Streaming media While streaming media, swipe backward. For more, see Adjust the volume. Volume down Streaming media While streaming media, swipe forward. Mute On a call During an active call, swipe to mute or unmute. For details, see Mute. ANC (Active Noise Canceling) / Transparency Mode Earbuds idle With earbuds idle, swipe to switch between ANC and Transparency Mode. For details, see ANC and Transparency Mode on page 15. 5 USB Bluetooth adapter Your high-fidelity Bluetooth USB adapter comes pre-paired to your Poly device. Plug it into your computer to connect to high-fidelity computer audio. Note: Adapter's USB connection and design may vary, but function is the same. Standard LEDs USB LEDs What they mean Flashing red and blue Pairing Solid blue Device connected Flashing blue On a call Solid red Mute active Flashing purple Streaming media from computer LEDs when Microsoft Teams* is detected USB LEDs What they mean Flashing red and blue Pairing Solid purple Microsoft Teams connected Flashing blue On a call Solid red Mute active Pulsing purple Microsoft Teams notification Note: *Requires Microsoft Teams desktop application. 6 Load software Download Poly Lens App to get the most out of your device. Some softphones require the installation of Poly software to enable device call control (answer/end and mute) functionality. • Download Poly Lens Desktop App at poly.com/lens. • Download Poly Lens Mobile App at poly.com/lens, the App Store or Google Play. Poly Lens Mobile App Poly Lens Desktop App Configure call control for softphones available for some softphones ✓ Change headset language ✓ ✓ Enable features ✓ ✓ Battery meter ✓ ✓ Update device firmware ✓ ✓ Manage notifications and alerts ✓ ✓ Schedule health and wellness reminders ✓ ✓ View user guide ✓ ✓ Find MyHeadset ✓ Update your Poly device Keep your firmware and software up-to-date to improve Poly device performance and add new features. Download the app at poly.com/lens. Update earbuds 1 To update your earbuds, first open the case to automatically power them on. 2 Go to Poly Lens Mobile App on your paired mobile device or to Poly Lens Desktop App on your connected computer. 3 Select your earbuds from the device list in Poly Lens App to view available updates. 4 Click the update button to wirelessly update earbud firmware or software. Update Bluetooth USB adapter Note: This device update requires Poly Lens Desktop App downloaded to your computer 5 With Poly Lens Desktop App downloaded, plug your Bluetooth USB adapter into your computer. 6 Select your Bluetooth USB adapter from the device list in Poly Lens Desktop App to view available updates. 7 Click the update button to update Bluetooth USB adapter firmware or software. 7 Fit Place earbud in your ear. Rotate down and forward for an optimal fit and sound experience. 1 Try the 3 eartips to find which size fits you comfortably while blocking external noise. 2 Listen to music and select the eartip that gives you the most bass response. 3 You may prefer a different size eartip in each ear. Replace eartips Change your eartips and lock them in place. 1 REMOVE: A Fold down the eartip's outer cone to reveal the eartip base connection to the earbud. B Loosen the notched eartip base from the earbud with your fingernail and remove. Ensure to loosen your eartip from the base so the outer cone isn't torn. C Alternatively, carefully twist the eartip base to remove. 2 REPLACE: A Place the eartip base on the earbud microphone column and press into place for a secure fit. B The eartip base clicks when locked into place. 8 Charge Your earbuds have up to 5.5 hours of talk time when fully charged and can be recharged twice by a fully charged case. 1 To charge your earbuds, place them in the charge case. Your earbuds begin charging when placed in the case. 2 To recharge the case, plug it into a computer or USB charging device using the supplied USB cable. Alternatively, recharge using a third-party wireless charger (not included). Tip: For fastest charging, plug your charge case into a power outlet. 3 Your charge case LEDs blink every 10 seconds when charging and turn off when fully charged. Charge time Device Charge time Charge case and earbuds Approximately 3 hours Earbuds only Approximately 2 hours Charge case only Approximately 2 hours Talk time Device Talk time Earbuds with ANC off Up to 5.5 hours Earbuds with ANC on Up to 5 hours Charge case Up to 11 hours Check battery level Check your earbud system battery level: • Listen to the battery level alert when you put on the earbuds. • View charge case LEDs. The center LED indicates the charge case battery level. Left and right LEDs show earbud battery level when earbuds are in the case. Note: To activate LEDs, open your case lid, press the case button, or connect/ remove the charge case from a power source. • View earbud and charge case battery level in Poly Lens App. Download at poly.com/ lens. 9 Voice alert Charge case LEDs Talk time "Battery high" Green 3 hours or more "Battery medium" Green 1 to 3 hours "Battery low" Yellow 10 minutes to 1 hour "Battery critical" Red Less than 10 minutes Quick charge Charge your earbuds for 15 minutes for up to a full hour of listening time. Wireless charging (Qi charging) Your charge case is compatible with third-party Qi wireless chargers. To charge wirelessly, place the earbuds in the charge case and place your case on your compatible wireless charger. Refer to your wireless charger user guide. Note: Your earbuds charge only when placed in the charge case. They do not charge if placed directly on the wireless charger. 10 Power Power on/off your earbud system Your earbuds and case power on and off automatically. To power on, do one of the following: • Open your charge case to automatically power on the earbuds. Conversely, place your earbuds in the case and close the lid to automatically power your earbuds off and start charging them. • Tip: If you don't hear a voice alert when you put on your earbud, click the earbud button once to power it on. DeepSleep mode If you leave your earbuds powered on but out of range of your paired device, they conserve power by entering DeepSleep mode after 90 minutes. To exit DeepSleep mode, power on by clicking each earbud button. 11 Connect and pair Pair to mobile device 1 Choose from 2 ways to put your earbuds in pair mode. • Press and hold your earbud button for 4 seconds until you hear "pairing." • With your earbuds in the charge case, open the lid and press the charge case button for 4 seconds. The charge case LEDs flash red and blue. 2 Activate Bluetooth® on your phone and set it to search for new devices. • iPhone Settings > Bluetooth > On* • Android™ Bluetooth: On > Scan for devices* Note: * Menus may vary by device. 3 Select " Poly VFree 60 Series." When your earbuds are successfully paired, you hear “pairing successful” and "phone connected." Reconnect With Bluetooth activated and in range, click your earbud to reconnect to your mobile device. Connect to PC Plug your USB Bluetooth adapter into your computer to get the best connection, softphone functionality and acoustic sound quality through your earbuds. The adapter comes pre-paired to your earbuds. 1 Put on your earbuds and insert the USB Bluetooth adapter into your laptop or PC. 2 The USB adapter LED flashes and then turns solid to indicate the earbuds are connected to the USB adapter. You hear “PC connected” to indicate the connection has been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid. 3 Load Poly Lens Desktop App by visiting poly.com/lens. This allows you to customize your earbud behavior through advanced settings and options. 12 Configure USB adapter for streaming media Your high-fidelity Bluetooth USB adapter comes ready to take calls. To stream media, configure your Bluetooth USB adapter. Windows 1 To configure your Bluetooth USB adapter for streaming media in your PC, go to Start menu > Control Panel > Sound > Playback tab. Select Poly BT700 set it as the Default Device and click OK. 2 To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter. Mac 1 To configure your Bluetooth USB adapter for streaming media on your Mac, go to System Preferences > Sound. On both the Input and Output tabs, select Poly BT700. Pair BT700 USB adapter again Typically, your USB Bluetooth adapter is pre-paired to your Poly audio device. In the event that your adapter is disconnected or bought separately, you will need to pair the adapter to your Poly device. Your USB adapter requires Poly Lens Desktop App to pair to a Poly audio device. Download: poly.com/lens. Note: Adapter design varies by USB connection. 1 Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it. 2 Put your Poly audio device in pair mode. 3 Launch Poly Lens Desktop App and navigate to Poly BT700. 4 Put your Bluetooth USB adapter into pair mode by selecting "Pair new device" on the adapter's main page or overflow menu. Your adapter flashes red and blue. Pairing is successful when you hear "pairing successful" and "PC connected" and the Bluetooth USB adapter LED is solid. Pair mode Put your earbuds in pair mode to connect to a new device or to pair again. • Press and hold your earbud button for 4 seconds until you hear "pairing." 13 The basics Adjust the volume Choose: • Adjust the volume on your connected mobile device or computer. • When streaming media, swipe your earbud sensor to adjust the volume. Swipe forward for volume down or backward for volume up. Each swipe changes the volume by one level. Note: By default, you may control volume on your earbuds only while streaming media. To customize your volume controls, see Customize your earbud swipe settings on page 17. Adjust earbud microphone volume (softphone) Place a test call and adjust earbud volume and softphone volume accordingly. Play or pause audio Choose a method to pause or resume streaming audio: • With active sensors, remove both earbuds to pause streaming audio. Put on one or both earbuds to resume audio.* Note: *Functionality varies by application. • Click your earbud button. Control with either earbud. Voice assistant (smartphone feature) Siri, Google Assistant™, Cortana Press and hold the earbud button for 2 seconds to activate your smartphone's default voice assistant. Wait for the phone prompt to activate voice dialing, search, and other smartphone voice controls. Note: The voice assistant feature is available when connected only to your smartphone. Ensure your USB Bluetooth adapter is unplugged from your computer to use this feature. 14 Use sensors Smart sensors respond when you put on or take off your headset. Customize in Poly Lens App. Below describes default settings. With active sensors Putting on earbuds will: Taking off earbuds will: Incoming call Answer the incoming call -- Music/streaming media Resume music/media* Pause music/media* Note: *Functionality varies by application. May not function with web-based apps. ANC and Transparency Mode Active Noise Canceling (ANC) reduces external noise and enhances your music and sound quality. Transparency Mode allows you to hear your surroundings while wearing your earbuds. To switch between ANC and Transparency mode, choose from one of the following: • Earbuds: With your earbuds idle, swipe your earbud's sensor to switch between your selected ANC Mode and your selected Transparency Mode. • Poly Lens App: Go to Settings > ANC: Tap to view and select your ANC Mode or Transparency Mode. For more about these settings, see ANC and Transparency Mode settings on page 17. Launch Microsoft Teams (Teams model only) You can easily open and use your Teams desktop application with your Microsoft Teamscertified earbud system. Click the button on the back of your earbud to do the following: • When not on a call, click your earbud button to view Microsoft Teams app on your computer. • When your connected Bluetooth USB adapter LED pulses purple, click your earbud button to view Teams notifications. • To raise or lower your hand during a Teams meeting, press and hold your earbud button for 2 seconds. Note: The purple multifunction button on the back of your earbud is also your Teams button. Note: Teams model and Teams desktop application required. Teams mobile application is not supported. 15 Make/Take/End Calls Make a call To make a call, dial using your computer softphone application or connected mobile device. Answer or end a call To answer or end a call, do one of the following: • Press once on the button on the back of your earbud. • Put on one or both earbuds to answer a call (with smart sensors active). • Use your connected mobile device or computer softphone application. Mute To mute your microphone during a call, do one of the following: • Swipe your earbud to mute or unmute your earbuds. • Mute from your connected mobile device or computer softphone. Answer a second call First, click the earbud button to end current call, then click the earbud button again to answer new call. Redial last outgoing call (smartphone feature) Double-click your earbud button to redial the last outgoing mobile call. Note: Control with either earbud. Answer calls from a second device It's easy to answer calls from two devices. When on a call, you hear a ringtone notification of the incoming call from the second paired device. To answer a second call from the other device, click your earbud button to end the current call and click the button again to answer the new call. If you choose to not answer the second call, it will go to voicemail. 16 More Features Customize your earbud swipe settings Customize your earbud swipe sensor settings in Poly Lens App. Download the app: poly.com/lens. By default, your earbud swipe controls vary by activity. To configure in Poly Lens App, go to Settings > Custom swipe sensor. Changes take effect immediately. Activity Earbuds are idle (not on a call or streaming media) On a call Streaming media or music Available swipe sensor settings • • • • Switch between ANC/Transparency Mode (default) Adjust volume Status check Do nothing • • • • • Switch between Mute/Unmute (default) Adjust volume Switch between ANC on/off Hold/resume call Do nothing • • • • Adjust volume (default) Switch between ANC/Transparency Mode Track forward/track backward Do nothing ANC and Transparency Mode settings Choose your preferred settings for ANC (Active Noise Canceling) and Transparency Mode. Choose settings in Poly Lens App. 17 Category Setting ANC Adaptive (default) ANC Standard ANC Off Transparency Mode Speech (default) Transparency Mode Environment Transparency Mode Off Description • Detects differences in user fit or movement while wearing and automatically adjusts to provide the best ANC experience • • Optimized to reduce external noise for office Provide a more natural audio experience and enhanced sidetone comfort • ANC powered off • Optimized for face-to-face communication while wearing your earbuds • • Best for busy streets Optimized to hear your surroundings while wearing your earbuds • Transparency Mode powered off Connect new earbud Connecting a replacement new earbud to your existing system is easy. 1 To connect your new earbud to the existing one, place them both in the charge case. 2 Close the case lid and wait for 10 or more seconds to complete the connection. 3 In some cases, you may need to pair your earbuds again to your Bluetooth USB adapter. The adapter plugs into your computer to connect to high-fidelity computer audio. To pair again , see Pair BT700 USB adapter again on page 13. 18 Troubleshooting Pairing Issue Resolution How do I pair my earbuds to a mobile device? See Pair to mobile device on page 12. How do I pair my earbuds to a computer or laptop? Plug in the hi-fidelity USB Bluetooth adapter to your computer or laptop. The adapter is paired to your earbuds and connects to computer audio. See Connect to PC. Why should I use the USB Bluetooth adapter instead of my computer's Bluetooth? Your USB Bluetooth adapter provides the best PC connection, softphone functionality and acoustic sound quality through your earbuds. See Connect to PC, Configure USB adapter for streaming media. How do I pair my USB Bluetooth adapter to another supported Poly audio device? Poly Lens Desktop App is required to pair your USB Bluetooth adapter to another device. Your Bluetooth adapter remembers up to 2 supported Poly audio devices, but connects to only one at a time. See Pair USB adapter again. I can't connect to my paired device or get error messages when I try to connect. • • • • Can I connect my earbuds to a mobile phone and computer at the same time? • Reconnect earbuds to your paired device by clicking either earbud button. Ensure that Bluetooth is enabled on your paired device. Ensure that your earbuds are removed from your case, powered on and paired to your mobile device. See Pair mode. Ensure that your earbud firmware is up-to-date in Poly Lens App. See Yes, your headset can connect to mobile and computer. Your headset remembers up to 8 devices, but connects to up to 2 devices at a time. That includes the USB Bluetooth adapter. Audio Issue Resolution I can't hear anything in one or both earbuds. • • • • • Check earbud volume level. See Adjust the volume. Check volume level on your paired mobile device. Check volume level on your connected computer. Power off and on to reset your earbuds. See Power on/off earbuds. Ensure that your earbuds are powered on and paired to your mobile device. See Pair to mobile device on page 12. 19 Issue How do I adjust the volume? Resolution • • I want to control volume from my earbuds at all times. The earbud audio is not working as expected when connected to my computer. • • • • During a call, nobody can hear me During a call, I can't hear anybody Music is not coming through my earbuds When I play music and a call comes in, the music is too loud or doesn't pause • By default, swiping your earbud adjusts your volume only when streaming media and not during other activities. Each swipe changes the volume one level. See Adjust the volume. To customize your earbud swipe controls, see Customize your earbuds. Customize your earbud settings to control volume at all times in Poly Lens App. By default, swiping your earbud adjusts your volume only when streaming media and not during other activities. See Customize your earbuds. Check the following: • • • • Plug in the hi-fidelity USB Bluetooth adapter to your computer or laptop. The adapter is paired to your earbuds and connects to computer audio. See Connect to PC. To configure the earbud sound on your computer, see Configure USB adapter for streaming media. Ensure that only one softphone application is opened at a time. For best performance, ensure your earbud system firmware is up-to-date. See Update your Poly device on page 7. Calls Issue Resolution My earbud call control is not working as expected when on a softphone call. Check the following: • • • • • How do I interact with Microsoft Teams? • • Ensure that only one softphone application is opened at a time. Power off and on your earbuds. To power off, place them in the charge case and close the lid. To power on, open the lid and remove the earbuds. If required to enable headset control (answer/end and mute) functionality, ensure you have Poly Lens Desktop App installed. See Load software. Select your softphone application in Poly Lens Desktop App. For best performance, ensure your earbud system firmware is up-to-date. See Update your Poly device on page 7. To interact with Microsoft Teams, tap the earbud button (Teams-certified model). Set your target phone by going to Poly Lens Desktop App > Softphones > Software Settings > Target Softphone 20 Issue Resolution Does my Microsoft Teams-enabled earbud system work with other softphones? Yes, while your headset is optimized for Microsoft Teams, it can be configured to use with other supported softphones. Set your target phone by going to Poly Lens Desktop App > Softphones > Software Settings > Target Softphone When you configure another softphone, the Call button: • • • doesn't interact with Teams doesn't go to Teams notifications will not launch Cortana General Issue Resolution Can I control features using either earbud? • • • I want to customize my earbud features. Yes, use the button or swipe controls on either earbud, but not on both earbuds at the same time. The button control is on the back of each earbud Learn more about Earbud button controls on page 4. The swipe sensor control is next to the metallic windscreen on the top of each earbud. Learn more about Earbud swipe sensor controls on page 5. • Customize your device settings with Poly Lens App. See Load software on page 7 and Customize your earbud swipe settings on page 17. The earbud sensors are not working as expected. • • • Understand your earbud wearing sensors. See Use sensors on page 15. Power off and on to reset your earbuds. See Power on/off earbuds. Ensure your computer is configured for streaming media: Configure USB adapter for streaming media. Customize or turn off your earbud wearing sensor settings in Poly Lens App. Download the app: poly.com/lens • A call is not automatically answered when I put on both of my earbuds Streaming media doesn't pause when I remove both earbuds • • Tip: For best audio performance while exercising, turn off wearing sensors in Poly Lens App. 21 Safety warnings Safety Instructions To reduce the risk of fire, electric shock, injury to persons and damage to property, read all operating instructions and the following safety instructions before using your Poly product. Operating, storage and charging temperature is 10˚C to 40˚C (50˚F to 104˚F). • Only use those Poly products and accessories designed for use with this product. • If you experience a skin irritation after using this product, discontinue use and contact Poly. • CHILDREN. Never allow children to play with the product-small parts may be a choking hazard. • Do not disassemble the product as this may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock or fire when the product is subsequently used. • Unplug, discontinue use and contact Poly if the product overheats or has a damaged outer casing, cord or plug. • Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your headset/ headphones with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset/headphones with different devices. The device you use and its settings affect the level of sound you hear. If you experience hearing discomfort, you should stop listening to the device through your headset/headphones and have your hearing checked by your doctor. To protect your hearing, some hearing experts suggest that you: 1 Set the volume control in a low position before putting your headset/headphones on your ears and use as low a volume as possible. 2 Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset/headphones in a quiet environment with low background noise. 3 Limit the amount of time you use headsets/headphones at high volume levels. 4 Turn the volume down if the sound from the headset/headphones prevent you from hearing people speaking near you. See poly.com/healthandsafety for more information on headsets/headphones and hearing. • If you use your headset/headphones while driving, check local laws regarding use of a mobile phone and headset, and ensure your attention and focus remain on driving safely. Use of a headset/headphones that covers both ears will impair your ability to hear other sounds and in most regions is illegal to use while operating a motor vehicle or riding a bicycle and may be a serious hazard for you and others. • If this product includes earbuds/eartips, install and use them in accordance with the instructions provided. Do not force earbuds/eartips down the ear canal. Consult a doctor if they become lodged in the ear canal. • Plug the mains adapter or charger into a socket-outlet that is near to the equipment and will be easily accessible. Battery Warnings for Wireless Products • If your product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and/or damage the 22 • • • • • • • • • • product. If your product has a replaceable battery, use only the battery type supplied by Poly. Remove a spent battery promptly. Replace rechargeable batteries after three years or 300 charge cycles, whichever occurs first. Do not dispose of the product or battery in a fire or heat above 40°C (104°F). Do not expose the battery to extremely high temperatures. It may result in an explosion or the leakage of flammable liquid or gas. Do not open, deform or mutilate the battery. There may be corrosive materials which can cause damage to eyes or skin and may be toxic if swallowed. Never put batteries in mouth. If swallowed, contact a physician or poison control center. Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Always store batteries where children cannot reach them. Do not allow any battery or its holder to contact metal objects such as keys or coins. RECYCLING: The product battery must be recycled or disposed of properly. Contact your local recycling center for battery removal and proper disposal. Use only the charger supplied by Poly to charge the product and follow the charging instructions provided. Alternatively, if your headset is designed to be charged with your cell phone charger, use only cell phone chargers approved and provided by your cell phone manufacturer. Do not use the charger for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use. 23 Support NEED MORE HELP? poly.com/support Manufacturer: Plantronics, Inc. 345 Encinal Street Santa Cruz, CA 95060 United States Plantronics B.V. Scorpius 171 2132 LR Hoofddorp Netherlands Plantronics Ltd. Building 4, Foundation Park Cannon Lane, Part 1st Floor Maidenhead, SL6 3UD United Kingdom © 2023 Poly. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All trademarks are the property of their respective owners. Manufactured by Plantronics, Inc. Model ID: Model IDs: earbuds F60T (F60TR, F60TL), adapter BT700/BT700C, charge case CBF60. 221719-06 03.23 24
advertisement
Key Features
- Wireless connection to mobile phone and computer
- Built-in microphone for calls
- Sensors for controlling volume and music playback
- Variety of eartips for a comfortable fit
Related manuals
Frequently Answers and Questions
How do I charge the earbuds?
The earbuds can be charged using the included charging case.
How do I connect the earbuds to my mobile phone?
To pair the earbuds to your mobile phone, press and hold the button on the back of either earbud for 4 seconds. The earbuds will then enter pairing mode and will be visible to your phone.
How do I use the sensors to control the earbuds?
The sensors on the earbuds can be used to control volume, music playback, and other features. To use the sensors, simply swipe forward or backward on the earbud stem.