STMicroelectronics STP16NF06FP Datasheet
विज्ञापन
विज्ञापन
STP16NF06
STP16NF06FP
N-channel 60V - 0.08
Ω - 16A - TO-220/TO-220FP
STripFET™ II Power MOSFET
General features
Type
STP16NF06
STP16NF06FP
V
DSS
60V
60V
R
DS(on)
<0.1
Ω
<0.1
Ω
■
■
■
Exceptional dv/dt capability
Low gate charge at 100°C
Application oriented characterization
I
D
16A
11A
Description
This Power MOSFET is the latest development of
STMicroelectronics unique "Single Feature
Size™" strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.
Applications
■
Switching application
TO-220
1
2
3
1
2
3
TO-220FP
Internal schematic diagram
Order codes
Part number
STP16NF06
STP16NF06FP
Marking
P16NF06
P16NF06
Package
TO-220
TO-220FP
Packaging
Tube
Tube
February 2007 Rev 8 1/14
www.st.com
14
Contents
Contents
STP16NF06 - STP16NF06FP
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2/14
STP16NF06 - STP16NF06FP Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Parameter
V
DS
V
GS
P
I
D
I
D
I
DM
(2) tot
Drain-source voltage (V
Gate- source voltage
GS
= 0)
Drain current (continuous) at T
C
= 25°C
Drain current (continuous) at T
C
= 100°C
Drain current (pulsed)
Total dissipation at T
C
= 25°C
Derating factor
Peak diode recovery voltage slope dv/dt
(3)
E
AS
(4)
I
AR
Single pulse avalanche energy
Avalanche current, repetitive or notrepetitive
V
ISO
T stg
T j
Insulation withstand voltage (DC)
Storage temperature
Max. operating junction temperature
1.
Current limited by package’s thermal resistance
2.
Pulse width limited by safe operating area.
3.
I
SD
≤ 16A, di/dt ≤ 200A/µs, V
DD
≤ V
(BR)DSS
, Tj
≤ T
JMAX
4.
Starting T j
= 25 °C, I
D
= 8A, V
DD
= 30V
Value
16
11
64
45
0.3
TO-220
60
± 20
TO-220FP
11
(1)
7.5
(1)
44
(1)
25
0.17
20
130
16
-2500
-55 to 175
Unit
A
W
W/°C
V/ns mJ
A
A
V
V
A
V
°C
Table 2.
Thermal data
Rthj-case Thermal resistance junction-case max
Rthj-amb Thermal resistance junction-ambient max
T
J
Maximum lead temperature for soldering purpose
TO-220
3.33
62.5
300
TO-220FP
6 °C/W
°C/W
°C
3/14
Electrical characteristics STP16NF06 - STP16NF06FP
(T
CASE
=25°C unless otherwise specified)
Table 3.
Symbol
On/off states
Parameter
V
(BR)DSS
Drain-source breakdown voltage
I
DSS
I
GSS
V
GS(th)
R
DS(on)
Zero gate voltage drain current (V
GS
= 0)
Gate-body leakage current (V
DS
= 0)
Gate threshold voltage
Static drain-source on resistance
Test conditions
I
D
= 250µA, V
GS
=0
V
DS
= max ratings
V
DS
= max ratings,
T
C
= 125°C
V
GS
= ± 20V
V
DS
= V
GS
, I
D
= 250µA
V
GS
= 10V, I
D
= 8A
Min.
60
2
Typ.
Max.
Unit
V
1
10
0.08
±100
4
0.1
µA
µA nA
V
Ω
Table 4.
Symbol
Dynamic
Parameter Test conditions
g fs
C
C
C
(1) iss oss rss
Forward transconductance
Input capacitance
Output capacitance
Reverse transfer capacitance
V
V
V
DS
DS
GS
= 15V, I
= 25V, f = 1MHz,
= 0
D
= 8A t d(on) t r t d(off) t f
Turn-on delay time
Rise time
Turn-off delay time
Fall time
V
DD
R
G
= 30V, I
D
= 8A
= 4.7
Ω V
GS
= 10V
(see
Figure 15
)
Q g
Q gs
Q gd
Total gate charge
Gate-source charge
Gate-drain charge
V
V
DD
GS
= 48V, I
= 10V
(see
1.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5%.
D
= 16A,
Figure 16
)
Min.
Typ.
Max.
Unit
6.5
S
315
70
30
7
18
17
6
10
3.5
3.5
13 pF pF pF ns ns ns ns nC nC nC
4/14
STP16NF06 - STP16NF06FP Electrical characteristics
Table 5.
Symbol
Source drain diode
Parameter Test conditions
I
I t
SD
I
SDM
V
SD
Q rr rr
(1)
(2)
RRM
Source-drain current
Source-drain current
(pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
= 16A, V
GS
= 0
I
SD
= 15A, di/dt = 100A/µs,
V
DD
= 30V, T j
= 150°C
(see
Figure 17
)
1.
Pulse width limited by safe operating area.
2.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5%
Min.
Typ.
Max.
Unit
16
64
1.3
50
88
3.5
A
A
V ns nC
A
5/14
Electrical characteristics STP16NF06 - STP16NF06FP
Figure 1.
Safe operating area for TO-220 Figure 2.
Thermal impedance for TO-220
Figure 3.
Safe operating area for TO-220FP Figure 4.
Thermal impedance for TO-220FP
Figure 5.
Output characteristics Figure 6.
Transfer characteristics
6/14
STP16NF06 - STP16NF06FP
Figure 7.
Transconductance
Electrical characteristics
Figure 8.
Static drain-source on resistance
Figure 9.
Gate charge vs. gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage vs. temperature
Figure 12. Normalized on resistance vs. temperature
7/14
Electrical characteristics
Figure 13. Source-drain diode forward characteristics
STP16NF06 - STP16NF06FP
Figure 14. Normalized B
VDSS
vs. temperature
8/14
STP16NF06 - STP16NF06FP
3 Test circuit
Figure 15. Switching times test circuit for resistive load
Figure 16. Gate charge test circuit
Test circuit
Figure 17. Test circuit for inductive load switching and diode recovery times
Figure 18. Unclamped Inductive load test circuit
Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform
9/14
Package mechanical data
4 Package mechanical data
STP16NF06 - STP16NF06FP
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
10/14
STP16NF06 - STP16NF06FP
DIM.
F
F1
F2
G
G1
H
A
B
D
E
L5
L6
L7
L2
L3
L4
Ø
Package mechanical data
0.75
1.15
1.15
4.95
2.4
10
MIN.
4.4
2.5
2.5
0.45
28.6
9.8
2.9
15.9
9
3
TO-220FP MECHANICAL DATA
mm.
TYP
16
1
1.7
1.7
5.2
2.7
10.4
MAX.
4.6
2.7
2.75
0.7
30.6
10.6
3.6
16.4
9.3
3.2
MIN.
0.173
0.098
0.098
0.017
0.030
0.045
0.045
0.195
0.094
0.393
1.126
.0385
0.114
0.626
0.354
0.118
inch
TYP.
0.630
MAX.
0.181
0.106
0.108
0.027
0.039
0.067
0.067
0.204
0.106
0.409
1.204
0.417
0.141
0.645
0.366
0.126
L6
L7
L3
L2
L5
L4
1 2 3
11/14
Package mechanical data STP16NF06 - STP16NF06FP
DIM.
F
H1
J1
E e e1
A b b1 c
D
L
L1
L20
L30
øP
Q
MIN.
4.40
0.61
1.15
0.49
15.25
10
2.40
4.95
1.23
6.20
2.40
13
3.50
3.75
2.65
TO-220 MECHANICAL DATA
mm.
TYP MAX.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
MIN.
0.173
0.024
0.045
0.019
0.60
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
16.40
28.90
3.85
2.95
0.147
0.104
inch
TYP.
0.645
1.137
MAX.
0.181
0.034
0.066
0.027
0.620
0.409
0.106
0.202
0.052
0.256
0.107
0.551
0.154
0.151
0.116
12/14
STP16NF06 - STP16NF06FP
Table 6.
Date
Revision history
Revision
09-Sep-2004
28-Jun-2005
21-Jul-2005
09-Aug-2006
20-Feb-2007
4
5
6
7
8
Changes
Preliminary version
Complete version
ECOPACK label inserted
New template, no content change
Typo mistake on page 1
Revision history
13/14
STP16NF06 - STP16NF06FP
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
14/14
डाउनलोड
विज्ञापन