Meat Grinders Instruction Manual

Meat Grinders
Models MG-CN-0012-E, 0022-E
Items 21720, 21634
Instruction Manual
Revised - 10/21/2016
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: [email protected]
www.omcan.com
Table of Contents
Model MG-CN-0012-E / Model MG-CN-0022-E
Section
Page
General Information --------------------------------------------------------------------------- 3 - 4
Safety and Warranty -------------------------------------------------------------------------- 4 - 6
Technical Specifications -------------------------------------------------------------------------- 6
Assembly and Operation --------------------------------------------------------------------- 6 - 7
Maintenance and Cleaning ------------------------------------------------------------------ 7 - 8
Instructions Français ------------------------------------------------------------------------ 8 - 12
Instrucciones en Español ----------------------------------------------------------------- 12 - 16
Parts Breakdown ---------------------------------------------------------------------------- 17 - 19
Electrical Schematics ---------------------------------------------------------------------------- 20
Notes ------------------------------------------------------------------------------------------- 21 - 22
Warranty Registration ---------------------------------------------------------------------------- 23
2
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
--------------------------------------------------------------------------------------------------------------------------------------------------Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’influence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modification
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
3
Safety and Warranty
IMPORTANT SAFEGUARDS
When using any electrical appliances, basic safety precautions should always be followed including the
following:
•
•
Read all instructions.
To protect against risk of electrical shock do not put meat grinder in water or other liquid.
4
Safety and Warranty
•
•
•
•
•
•
•
•
•
•
Close supervision is necessary when any appliance is used near children.
Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
Avoid contacting moving parts. Never feed meat by hand. Always use the pusher.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Return appliance to the Omcan service facility for examination, repair
or electrical or mechanical adjustment.
The use of attachments not recommended or sold by Omcan may cause fire, electric shock or injury.
Do not use outdoors.
Do not let cord hang over edge of table or counter.
Do not let cord contact hot surface, including the stove.
Do not use fingers to scrape food away from discharge disc while appliance is operating.
SAVE THESE INSTRUCTIONS.
CAUTION
•
•
•
•
•
•
•
•
When carrying the unit, be sure to hold Motor Housing with both hands, do not hold only Hopper Plate. Be
careful to carry the unit, as it is very heavy.
Do not grind hard foods such as bones, frozen meat, nuts, or vegetables.
Do not grind ginger and other materials with hard fiber.
To avoid jamming, do not force to operate the unit with excessive pressure.
If the unit jams, switch off immediately and clean the unit. (See “Jamming”, page 7)
Always connect your device to a grounded electrical outlet.
Do not unplug the appliance by pulling on cord. To unplug, grasp the plug not the cord.
The appliance should be used strictly in accordance with these instructions as no liability can be accepted
for any damage caused by non-compliance with these instructions, or any other improper or handling.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures not
improper use.
Please see http://www.omcan.com/warranty.html for complete information.
WARNING:
The packaging components (cardboard, polyethylene, and others) are classified as normal solid urban waste
and can therefore be disposed of without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
5
Safety and Warranty
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Technical Specifications
Model
Horsepower
RPM
Amp
Electrical
Dimensions (DWH)
Item Number
MG-CN-0012-E
1 HP
MG-CN-0022-E
1.5 HP
200
8A
10A
110V/60/1
18” x 10.8” x 18.3”
457 x 273 x 464mm
21720
21” x 11.8” x 19.8”
533 x 298 x 502mm
21634
BEFORE USE
Make sure that the voltage and frequency indicated on the rated plate are the same as your local supply, and
that the mains are properly ground. Wash all the parts (except those that do not touch meat) in warm soapy
water. Before plugging in, ensure switch is off and unit is thoroughly dry.
Assembly and Operation
6
Assembly and Operation
TO MINCE / GRIND MEAT
Assembling
1. Place auger tube tightly onto opening of motor housing.
2. Holding tube with one hand, tighten locking knob clockwise.
3. Place auger into the tube, long end first, by turning auger slightly until it is set into motor housing and cover
the transmission shaft.
4. Place cutting blade onto auger with the blade facing the front as illustrated.
• If it is not fitted properly, meat will not be ground.
5. Place the desired cutting plate next to cutting blade, and align the pin with the plate.
6. Screw the locking ring onto the auger tube.
7. Do not over tighten. Place hopper plate on head and fix into position.
8. Position the unit on a firm surface.
• The air passage at the bottom and the side of motor housing should be kept free and not blocked,
maintain a minimum of 4”/10cm free space around the grinder.
Mincing / Grinding meat
Cut all boneless meat into pieces so that they fit easily into hopper opening. Plug in, then switch the machine
on.
1. Use the pusher to feed the meat into the grinder.
• After use, switch off and unplug.
TROUBLE SHOOTING:
If the minced meat is not discharged smoothly or in the form of paste, the causes and remedies could be:
• Screw cap is tightened too much thus, the cutting blade does not contact properly with the cutting plate.
Readjust it.
• The cutting plate is blocked. Clean it.
• Cutting blade edges is dull. Sharpen or replace it.
JAMMING
When the circuit breaker automatically stops the motor, or when the motor continues to function but no meat
comes out of cutting plate, due to jamming, switch off.
• Do not switch on. Press CIRCUIT BREAKER to reset. Turn switch to REVERSE to clear the jam.
• Reverse operation will continue for as long as REVERSE is held. Clean the unit.
Maintenance and Cleaning
ALWAYS UNPLUG THE MACHINE FROM THE ELECTRICAL SOCKET BEFORE PERFORMING ANY
MAINTENANCE OR CLEANING!
7
Maintenance and Cleaning
TO CLEAN
Disassembling
Make sure that the motor has stopped completely. Disconnect the plug from the power outlet.
Locking ring has 3 flat sides, convenient for unscrewing. If locking ring is too tight, please knock at the flat
sides with a soft-handle, then locking ring will be unscrewed easily.
Unscrew the locking knob, and take out the auger tube (with cutting plate, cutting blade and feed screw), then
point the auger tube mouth downward in order to take out cutting plate, cutting blade and feed screw.
Cleaning
Remove meat, etc. wash each part in warm soapy water.
• A bleaching solution containing chlorine will discolor aluminum surfaces.
• Do not immerse motor housing in water, but only wipe it with a damp cloth.
A little salad oil on the plate & knife after washing and drying will keep them lubricated.
REFERENCE
Item Number Model Number
21720
MG-CN-0012-E
21634
MG-CN-0022-E
Description
Meat Grinder #12 Aluminum
1 HP/746 W 110V/60/1 ETL cETLus
Meat Grinder #22 Aluminum
1.5 HP/1119 W 110V/60/1 cETLus
Manufacturer Model Number
FA12
FA22
8
ATTENTION
•
•
•
•
•
•
•
•
9
MG-CN-0012-E
1 HP
MG-CN-0022-E
1.5 HP
200
8A
10A
110V/60/1
18” x 10.8” x 18.3”
457 x 273 x 464mm
21720
21” x 11.8” x 19.8”
533 x 298 x 502mm
21634
ASSEMBLÉE ET FONCTIONNEMENT
10
ENTRETIEN ET NETTOYAGE
DÉBRANCHEZ TOUJOURS LA MACHINE DE LA PRISE ÉLECTRIQUE AVANT D’EFFECTUER TOUT
ENTRETIEN OU NETTOYAGE!
11
21720
MG-CN-0012-E
21634
MG-CN-0022-E
12
PRECAUCIÓN
•
•
•
•
•
•
•
•
13
MG-CN-0012-E
1 HP
MG-CN-0022-E
1.5 HP
200
8A
10A
110V/60/1
18” x 10.8” x 18.3”
457 x 273 x 464mm
21720
21” x 11.8” x 19.8”
533 x 298 x 502mm
21634
MONTAJE Y OPERACIÓN
14
MANTENIMIENTO Y LIMPIEZA
SIEMPRE DESENCHUFE EL EQUIPO DE LA TOMA DE CORRIENTE ANTES DE DAR MANTENIMIENTO
O LIMPIEZA!
15
21720
MG-CN-0012-E
21634
MG-CN-0022-E
16
Parts Breakdown
Model MG-CN-0012-E 21720
17
Parts Breakdown
Model MG-CN-0022-E 21634
18
Parts Breakdown
Model MG-CN-0012-E 21720
Item No.
Position
Item No.
Position
Item No.
Position
14663
Locking Hand Screw for FA12
1
76322
Washer for FA12
21
72254
Washer for FA12
39
14664
Auger for FA12
5
76323
High Temperature-Proof for FA12
22
72255
Bolt M4*10 for FA12
40
14665
Auger Tube for FA12
6
76324
Stainless Steel Washer 14*0.2 for FA12
23
76303
Washer 8*1 for FA12
41
14666
Locking Bolt for FA12
9
14673
Gear for FA12
24
45027
Washer for FA12
42
76319
Grinder Head for FA12
10
39060
Motor for FA12
25
45028
Bolt M8*24 for FA12
43
23763
Meat Tray for FA12
11
76325
Frame for FA12
26
14676
Capacitor (16uf,450VAC) for FA12
44
14667
Meat Pusher for FA12
12
23764
Chromed Back Cover for FA12
27
14677
Capacitor ( 75uf, 250VAC) for FA12
45
14668
Pin for FA12
13
76326
Screw M4*8 for FA12
28
45029
Screw M4*10 for FA12
46
14669
O-Ring B24*40*7 for FA12
14
76327
Electrical Cord for FA12
29
45030
Binder for FA12
47
14670
Bearing for FA12
15
76328
Cable Clip for FA12
30
45031
Bottom Cover for FA12
48
76320
O-Ring for FA12
16
76329
Base for FA12
31
45032
Nut M4 for FA12
49
44943
Pin 3*12 for FA12
17
14674
Switch for FA12
32 - 35
45033
Rubber Feet for FA12
50
14671
Gear for FA12
18
14675
Switch Knob for FA12
36
45034
Bolt M4*12 for FA12
51
14678
Grinder Head and Gear Box Assembly
for FA12
52
76321
Pin 3*16 for FA12
19
72252
Clip for FA12
37
14672
Gear for FA12
20
72253
Washer for FA12
38
Model MG-CN-0022-E 21634
Item
No.
Position
Item
No.
Position
Item
No.
Position
31592
Screw Cap for FA22
1
31610
Overcurrent Protection Fuse for FA22
20
31629
Capacitor Holder 39 for FA22
39
31593
Cutting Plate 5 for FA22
2
31611
Bolt M3x10 for FA22
21
31630
Capacitor Holder 42 for FA22
40
31594
Cutting Plate 8 for FA22
3
31612
Switch Knob for FA22
22
31631
Running Capacitor for FA22
41
11078
Cutting Blade for FA22
4
31613
Sunk Self Tapping Screw PT4x8 for FA22
23
31632
Starting Capacitor for FA22
42
31596
Hopper Plate for FA22
5
31614
Bolt M4x16 for FA22
24
31633
Washer 4x1.2 for FA22
43
31597
Food Pusher for FA22
6
31615
Switch Key Sets for FA22
25
31560
Rubber Underlay for FA22
44
31598
Socket Head Cap Screw M5x25 for FA22
7
31616
Switch for FA22
26
31634
Bolt M4x12 for FA22
45
31599
Spring Washer 5 for FA22
8
31617
Base Seat for FA22
27
31635
Feed Screw Assembly for FA22
100
31600
Washer 5 for FA22
9
31618
Washer 8 for FA22
28
31639
Transmission Case Cover Assembly
for FA22
200
31559
Locking Knob for FA22
10
31619
Spring Washer 8 for FA22
29
31640
Transmission Case Cover for FA22
201
31601
Stainless Steel Washer 22x14.2x0.8 for FA22
11
31620
Socket Head Cap Screw M8x25 for FA22
30
31641
Square Hole Shaft for FA22
202
31602
Twofoldgang Bevel Wheel for FA22
12
31621
Supply Cord Holder for FA22
31
31642
Seal Ring B30x40x7 for FA22
203
204
31603
Stainless Steel Plate for FA22
13
31622
Washer 4x0.8 for FA22
32
31643
Both Sides Sealed Bearing 6203-2RZ
for FA22
31604
Motor Assembly for FA22
14
31623
Spring Washer 4 for FA22
33
31644
Antiextrusion Ring for FA22
205
31605
Back Cover for FA22
15
31624
Bolt M4x10 for FA22
34
31645
Pin 3x11 for FA22
206
31606
Socket Head Cap Screw M4x8 for FA22
16
31625
Socket Head Cap Screw M4x8 for FA22
35
31646
Big Bevel Wheel for FA22
207
31607
Supply Cord for FA22
17
31626
Bolt M4x8 for FA22
36
31647
Pin 3x15 for FA22
208
31608
Supply Cord Back Up Ring for FA22
18
31627
Base Board for FA22
37
31648
Small Bevel Wheel for FA22
209
31609
Nickel Plating Screw M4x6 for FA22
19
31628
Nut for FA22
38
31649
Head Assembly for FA22
300
19
Electrical Schematics
Model MG-CN-0012-E 21720
Model MG-CN-0022-E 21634
20
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
21
Notes
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
22
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specified below. You can also register online by visiting:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécifié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
www.omcan.com/warrantyregistration.html
For mailing in Canada
For mailing in the US
Pour postale au Canada
Por correo en Canadá
OMCAN
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
Canada, L5L 4X5
USA, 14305
or email to: [email protected]

Purchaser’s Information
Name:
Company Name:
Address:
Telephone:
City:
Province or State:
Postal or Zip:
Country:
Email Address:
Type of Company:
Dealer from which Purchased:
Dealer City:
Dealer Province or State:
Restaurant
Bakery
Deli
Butcher
Supermarket
Caterer
Institution (specify):
Invoice:
Other (specify):
Model Number:
Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY):
Would you like to extend the warranty?
Date of Installation (MM/DD/YYYY):
Yes
No
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan
23