Parkside IAN 104473 User manual

PRESSURE WASHER
Translation of the original instructions
20.03.15 12:25
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
Originalbetriebsanleitung
Translation of the original instructions
4
16
20.03.15 12:25
A
1
2
3
4
5
6
7
8
14
9
13
12
11
10
B
11
6
10
12
2
1
14
10
3
DE
AT
•
•
4
DE
-
A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
D
15
F
16
AT
5
DE
AT
6
•
•
•
DE
•
•
•
•
•
•
•
•
AT
•
•
•
•
•
•
7
DE
•
•
•
•
AT
•
•
•
•
•
8
•
•
•
•
•
•
•
•
DE
B
•
•
•
•
C
•
•
•
AT
9
DE
•
•
D
•
verriegelt
offen
•
10
•
Betrieb beenden
•
•
•
DE
•
•
•
•
F
•
•
AT
E
11
DE
AT
Garantie
•
•
•
•
•
•
12
•
•
AT
13
DE
AT
Service-Center
Importeur
DE
AT
14
DE
AT
15
GB
Content
Introduction
Introduction ...............................16
Intendend purpose .....................16
General Description....................17
Extent of the Delivery ..................... 17
Overview ..................................... 17
Functional description .................... 17
Technical data ............................17
Notes on Safety .........................18
Explanation of symbols .................. 18
Symbols in the manual ................... 18
General notes on safety ................. 18
Initial Operation.........................20
Setting up .................................... 21
Mains connection.......................... 21
Operation .................................... 21
Interrupting operation .................... 22
Ending operation .......................... 22
Using detergents ........................... 22
Fixing the Wheels ......................... 22
Cleaning and Maintenance .........23
Cleaning ...................................... 23
Maintenance ................................ 23
Storage ......................................23
Waste Disposal and Environmental
Protection ...................................23
Guarantee .................................24
Repair Service ............................25
Service-Center ............................25
Importer ....................................25
Spare parts/Accessories .............26
Trouble shooting ........................27
Translation of the original
EC declaration of conformity ......28
Exploded Drawing .....................29
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it represents no cause for concern.
The operating instructions constitute part of
this product. They contain important information on safety, use and disposal.
Before using the product, familiarise yourself with all of the operating and safety
instructions. Use the product only as described and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intendend purpose
Only use the pressure washer in the following private home areas:
•
•
•
16
To clean machines, vehicles, buildings,
work tools, facades, terraces, gardening tools, etc. with a high-pressure
water jet.
Only use with original accessories and
spares.
Observe the manufacturer’s instructions
for the device that is to be cleaned.
GB
General Description
Extent of the Delivery
Unpack the pressure washer and verify the
contents:
-
Pressure washer
Gun
High-pressure hose
Jet lance
High-pressure nozzle
Adjustable flat-jet nozzle
Cleaning agent container with nozzle
Accessories holder
Nozzle cleaning pin
Translation of the original instructions
for use
The diagram of the most important functional elements can be
found on the foldout sides.
Overview
A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
High-pressure connection on the
gun side
High-pressure connection on the
washer side
High-pressure connection
Carrying handle
ON / OFF switch
Accessories holder
Nozzle cleaning pin
Power supply cable
Water connection with sieve insert (not visible)
Gun
Jet lance
Adjustable flat-jet nozzle
High-pressure nozzle
Cleaning agent container with
nozzle
D
F
15
Locking lever
16
Bolts
Functional description
The pressure washer is to be used for
washing with a high-pressure water jet. A
detergent can be added if this is required.
For the functions of the operating elements
please refer to the subsequent description.
Ensure that the safety instructions are always observed!
Technical data
Pressure Washer ......... PHD 100 E2
Mains connection ............. 230 V~, 50 Hz
Power consumption ....................1450 W
Mains cable .....................................5 m
Weight (incl. all parts) ...................5.7 kg
Safety class ...................................... II
Degree of protection ......................... IPX5
Inflow temperature (T in max)............40°C
Inflow pressure (p in max) .. 0.8 MPa (8 bar)
Operating pressure (p) ...... 7 MPa (70 bar)
Max. operating pressure
(p max) ....................... 10 MPa (100 bar)
Pumping rate, water (Q)............... 5 l/min
Max. pumping rate, water
(Q max) .................................. 6.6 l/min
Acoustic pressure level
(LPA) ..................81.8 dB(A); KPA=3.5 dB
Sound power level (LWA)
measured ......... 94.2 dB (A); KwA=3.5 dB
guaranteed ........................... 98 dB (A)
Vibration (ah) ....... 0.7 m/s2 ; K=0.15 m/s2
The operating conditions during measuring
and the procedures used for measuring in
accordance with EN 60335-2-79:2009.
17
GB
Technical and optical changes can be
carried out in the course of further development without notice. All dimensions, references and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
Notes on Safety
Information of the acoustic power
level LWA in dB.
Electric appliances should not be disposed of in the domestic garbage.
Safety class II
Symbols in the manual
Warning symbols (the danger
can be explained at the place
of the exclamation mark)
with information on damage
and injury prevention.
This Section is concerned with the basic
safety rules when working with the pressure washer.
Explanation of symbols
Instruction symbols (the instruction
can be explained at the place of
the exclamation mark) with information on preventing damage.
Attention!
Before beginning work, familiarise
yourself thoroughly with all the operating elements, particularly with
how they function and operate. Ask
a specialist if necessary.
Attention: Remove the plug from the
socket as soon as the power lead is
damaged or cut.
Help symbols with information on
improving tool handling.
General notes on safety
•
•
The pressure washer is not suitable
for direct connection to the drinking
water supply system.
CAUTION. pressure washers can be dangerous if
they are not operated correctly! The jet must never
be directed at people,
animals, electric equipment
connected to the power
supply or against the actual
pressure washer.
18
•
•
•
Children may not operate the device.
This device can be used by individuals
with reduced physical, sensory or mental capabilities or a lack of experience
or knowledge if they are supervised or
have been instructed in how to use the
device safely and understand the associated dangers. Children must not play
with the device.
Use the equipment only on a flat, stable surface.
The transport handle is exclusively for
transporting the equipment. The equipment is portable but not to be carried
during operation.
For your safety, it is recommended that
you wear safety glasses, safety boots
and gloves and, if necessary, ear pro-
GB
•
tection.
In the event of a fault or defect during operation, immediately switch off
and unplug the equipment. Then read
page 27 of the operating instructions
for possible fault causes or contact our
service centre.
•
•
•
Working with the equipment
Caution: to avoid accidents and
injuries:
CAUTION. pressure washers can be dangerous if
they are not operated correctly! The jet must never
be directed at people,
animals, electric equipment
connected to the power
supply or against the actual
pressure washer.
•
•
•
•
•
•
•
Do not direct the jet at yourself or others in order to clean clothes and shoes.
Do not operate the pressure washer
when other people are in the immediate vicinity, other than they are also
wearing protective clothes.
Always use the spray gun with both
hands. This will enable you to safely
counter the recoil force from the emerging water jet.
Take appropriate measures to keep
children away from the equipment
whilst it is running.
Dispose of the packaging material correctly.
Do not use the equipment in the vicinity
of flammable liquids or gases. Nonobservance will result in a risk of fire
or explosion.
Do not spray combustible liquids. Risk
of explosion.
Store the equipment in a dry place and
out of reach of children.
Children must be supervised in order
to ensure that they do not play with the
equipment.
Ensure that no exhaust emissions occur
within the vicinity of air inlets.
Caution! To avoid damage to the
equipment and any possible
person injury resulting from this:
•
•
•
•
•
•
•
Do not work with damaged or incomplete equipment, or with equipment
that has been converted without the
approval of the manufacturer. Before
initial operation, have a specialist
check that the required electrical protection measures are in place.
Never operate the pressure washer if
the power supply cable or other important parts, such as the high-pressure
hose or the gun, are damaged.
Protect the pressure washer from frost
and dry running.
Use only original accessories and do
not carry out conversion work on the
equipment.
Please read the notes in the operating
instructions on the topic of “maintenance and cleaning”. Any measures
above and beyond these, particularly
opening the equipment, are to be carried out by an electrician. In the case
of repairs, always contact our service
centre.
The washer was designed for operation with a neutral detergent based on
a biologically decomposable anionic
tenside. Other detergents or chemical
substances could impair the safety of
the washer and damage it.
If you come into contact with cleaning
agents, rinse with plenty of clean wa-
19
•
ter.
Water that has passed through a backflow preventer is classified as undrinkable.
High-pressure hoses, fittings and
couplings are important for machine
safety. Use only high-pressure hoses,
fittings and couplings recommended by
the manufacturer.
To ensure machine safety, use only
original replacement parts from the
manufacturer or replacement parts authorised by the manufacturer.
•
•
•
•
•
Electrical safety:
Caution: to avoid accidents and
injuries from electric shocks:
•
The plug and socket of an extension
cable must be water-tight!
Unsuitable extension cables can
be dangerous as people can be
harmed by an electric shock!
•
•
•
•
•
•
20
Protect the electric plug connections
against moisture.
If there is a risk of flooding, fix the
plug connections in an area that is safe
from flooding.
Ensure that the mains voltage matches
the specifications on the rating plate.
The electrical installation shall be according to national wiring rules.
Connection to the mains must be
carried out by an experienced electrician and meet the requirements of
IEC 60364-1.
The device must only be connected to
a mains socket via a residual-current
circuit breaker (RCD) with a rated leakage current of not more than 30 mA.
Fuse: at least 13 ampere.
•
•
•
Before each use, check the equipment,
cable and plug for damage.
If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified person in order to prevent hazards.
Do not pull the plug from the socket by
the cable. Protect the cable from heat,
oil and sharp edges.
Do not carry or fix the equipment by
the cable.
Use only extension cables that are protected from spray water and designed
for outdoor use. Always fully unroll a
cable drum before use. Check the cable for damage.
Before any work on the equipment,
during work breaks and in the case
of non-use, remove the plug from the
socket.
The cross-section of the power supply cable must not be less than
2 x 2,5 mm².
Wear sturdy footwear to protect
against electric shock.
Initial Operation
In keeping with current regulations
a pressure washer must never be
operated off the drinking water
mains supply without a controllable backflow preventer. A suitable
backflow preventer in conformity
with EN 12729 type BA must be
used.
Water that has passed through a backflow
preventer is classified as undrinkable.
A backflow preventer is available
from specialist retailers.
GB
•
Employ an ordinary garden hose for
the water intake and ensure sufficient
length.
Setting up
B
•
•
•
•
C
•
•
•
Insert the accessory holder
(6) into the attachment on the
reverse-side of the device (see
small image).
Screw the equipment side of the
high-pressure hose connection
(2) to the high-pressure hose connection (3) on the equipment.
Insert the high-pressure connection on the gun side (1) into the
spray gun (10).
Establish the water supply by
connecting the rapid-action water supply connector to the water
connection with sieve insert
( A 9).
Connect to the spray gun (10)
by inserting and screwing in the
jet tube (11).
If the jet pipe (11) is fitted, screw
in with the jet pipe (11) to connect either the adjustable fan
nozzle (12) or the high pressure
nozzle (13).
Screw in to connect the detergent container with nozzle ( A
14) directly to the spray gun
(10). With using the cleaning
agent container with the nozzle ( A 14), pour only cleaning
agent into the container. It is
sucked in automatically.
The width of the jet can be increased by
turning the end of the nozzle to the left. To
reduce the width of the jet, turn the end of
the nozzle to the right.
Mains connection
The pressure washer you have acquired is
already fitted with a mains plug. The pressure washer must only be connected to an
earthed socket 230 V ~ 50 Hz.
Only operate the pressure washer
after all the above points have been
observed.
•
•
Ensure that the pressure washer is
turned off by its ON/OFF switch ( A
5).
Insert the mains plug into the mains
socket
Operation
•
•
Connect the equipment to the water
tap. Observe the regulations for the
use of a system separator.
Turn on the water tap entirely.
Never operate the pressure washer
with a closed water tap. Dry running will damage the washer!
Be prepared for the recoil
force of the emitted water jet!
Ensure that you are standing
firmly and that you are holding the gun ( A 10) securely,
otherwise you could injure
yourself or other people.
•
•
Switch on the pressure washer with the
ON/OFF switch ( A 5).
Pull the lever of the gun ( A 10) to turn
on the washer.
Releasing the lever will switch
off the washer, but the pressure
within the system is retained.
21
GB
D
•
Lock / unlock the switch-on lever
of the gun (10) by depressing
the locking lever (15).
Lock the switch-on lever to prevent
the pressure washer from being inadvertently/accidentally started.
Locked
7. Depress the start lever on the spray
gun (10) until the pressure is released.
8. Please repeat steps 5. to 7. several
times until there is no further air in the
equipment.
Interrupting operation
•
•
Open
In case of leaks in the water
system, immediately switch
off the equipment at the on/
off switch (5) and disconnect
the mains cable (8) of the
equipment from the mains.
There is a risk of electric
shock. Start restoring the water connections (see “Initial
Operation – Setting up”).
If there is still air in the equipment,
please proceed as follows:
Bleed the supply hose:
1. Remove the quick connection for the
garden hose adapter on the water
connection (9) and open the water tap
until water with no bubbles emerges.
2. Close the water tap.
3. Connect the supply hose to the equipment with the aid of the quick connection for the garden hose adapter (9).
4. Fully open the water tap.
Bleed the equipment:
5. Switch on the equipment at the on/off
switch (5) until the pressure has built
up.
6. Switch off the equipment at the on/off
switch (5).
22
Release the lever of the gun ( A 10).
During prolonged work intervals turn
off the washer by its ON / OFF switch
( A 5).
Ending operation
•
•
•
•
•
•
•
After working with cleaning agents,
run the equipment with clean water to
completely rinse the cleaning agent
from the pipes.
Release the lever of the gun ( A 10).
Turn off the pressure by its ON / OFF
switch ( A 5).
Turn off the water tap.
Pull the lever of the gun ( A 10) to vent
the pressure existing within the system.
Pull the mains plug and wind up the
mains cable.
Disconnect the pressure washer from
the water mains.
Using detergents
The washer was designed for operation
with a neutral detergent based on a biologically decomposable anionic tenside.
Other detergents or chemical substances
could impair the safety of the washer and
damage it.
F
Fixing the Wheels
Both of the front wheels can be fastened
in order to prevent the unintentional rolling
away of the pressure washer.
To do so, press both bolts (16) downwards. The wheels are now no longer
able to turn.
To cancel the wheel fixing, push the
two bolts (16) upwards.
Cleaning and
Maintenance
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
Storage
•
Pull out the power plug before
every maintenance operation. There
is a risk of electrocution or of injury
from moving parts.
Cleaning
Never direct the water jet
against the washer, nor clean
the washer under flowing
water. This could give rise to
the danger of electric shock
and damage the washer! .
Always keep the washer clean. Do
not use any detergents or solvents.
•
•
•
E
Always keep the ventilation slots clean
and free.
Only clean the pressure washer with a
soft brush or a slightly moist cloth.
In case a nozzle of the jet tube ( A
12/13) is clogged up, use the nozzle
cleaning pin ( A 7) to remove the object from the nozzle.
If necessary, take off the water connection with the filter insert (9) and
clean the filter insert.
Maintenance
The pressure washer is maintenance free.
•
•
•
•
•
Drain all the water from the pressure
washer. Disconnect the unit from the
water supply. Press the On/Off switch
( A 5) to turn on the pressure washer
for no longer than 1 minute until no
more water escapes from the highpressure connection ( A 3). Turn off the
unit.
Wind up the mains cable.
Protect the pressure washer and its accessories from frost when they have not
been completely drained of all water.
Store the pressure washer and its accessories in a frost-free room.
To transport or put away the equipment, use only the carrying handle.
Store the equipment only in a horizontal position in order to protect it from
any damage.
Waste Disposal and Environmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recycling centre when you have finished with
them.
Electric appliances should not be disposed of in the domestic garbage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center about
this.
We can carry out a waste disposal of your
device free of charge.
23
GB
Guarantee
Dear Customer,
This equipment is provided with a 3-year
guarantee from the date of purchase.
In case of defects, you have statutory rights
against the seller of the product. These
statutory rights are not restricted by our
guarantee presented below.
Terms of Guarantee
The term of the guarantee begins on the
date of purchase. Please retain the original
receipt. This document is required as proof
of purchase.
If a material or manufacturing defect
occurs within three years of the date of
purchase of this product, we will repair or
replace – at our choice – the product for
you free of charge. This guarantee requires
the defective equipment and proof of purchase to be presented within the three-year
period with a brief written description of
what constitutes the defect and when it occurred.
If the defect is covered by our guarantee,
you will receive either the repaired product
or a new product. No new guarantee period begins on repair or replacement of the
product.
Guarantee Period and Statutory
Claims for Defects
The guarantee period is not extended by
the guarantee service. This also applies for
replaced or repaired parts. Any damages
and defects already present at the time of
purchase must be reported immediately after unpacking. Repairs arising after expiry
of the guarantee period are chargeable.
Guarantee Cover
The equipment has been carefully produced in accordance with strict quality
24
guidelines and conscientiously checked
prior to delivery.
The guarantee applies for all material and
manufacturing defects. This guarantee
does not extend to cover product parts that
are subject to normal wear and may therefore be considered as wearing parts (e.g.
filters or attachments) or to cover damage
to breakable parts (e.g. switches, batteries,
or parts made of glass).
This guarantee shall be invalid if the product has been damaged, used incorrectly or
not maintained. Precise adherence to all of
the instructions specified in the operating
manual is required for proper use of the
product. Intended uses and actions against
which the operating manual advises or
warns must be categorically avoided.
The product is designed only for private
and not commercial use. The guarantee
will be invalidated in case of misuse or
improper handling, use of force, or interventions not undertaken by our authorised
service branch.
Processing in Case of Guarantee
To ensure efficient handling of your query,
please follow the directions below:
• Please have the receipt and identification number (IAN 104473) ready as
proof of purchase for all enquiries.
• Please find the item number on the rating plate.
• Should functional errors or other defects occur, please initially contact the
service department specified below by
telephone or by e-mail. You will then
receive further information on the processing of your complaint.
• After consultation with our customer
service, a product recorded as defective
can be sent postage paid to the service
address communicated to you, with the
GB
proof of purchase (receipt) and specification of what constitutes the defect
and when it occurred. In order to avoid
acceptance problems and additional
costs, please be sure to use only the address communicated to you. Ensure that
the consignment is not sent carriage
forward or by bulky goods, express or
other special freight. Please send the
equipment inc. all accessories supplied
at the time of purchase and ensure adequate, safe transport packaging.
Repair Service
For a charge, repairs not covered by
the guarantee can be carried out by
our service branch, which will be happy to
issue a cost estimate for you.
We can handle only equipment that has
been sent with adequate packaging and
postage.
Attention: Please send your equipment to
our service branch in clean condition and
with an indication of the defect.
Equipment sent carriage forward or by
bulky goods, express or other special
freight will not be accepted.
We will dispose of your defective devices
free of charge when you send them to us.
Service-Center
Service Great Britain
Tel.: 0871 5000 720
(£ 0.10/Min.)
E-Mail: [email protected]
IAN 104473
Importer
Please note that the following address is
not a service address. Please initially contact the service centre specified above.
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
www.grizzly-service.eu
25
GB
Spare parts/Accessories
Spare parts and accessories can be obtained at
www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre via telephone (see
“Service-Center” page 25). Please have the order number mentioned below ready.
Item
A 1/2
A9
A 10
A 11
A 12
A 13
26
Description ............................................................... Order No.
High-pressure hose ................................................................. 91104126
Water connection .................................................................. 91097408
Gun..................................................................................... 91104125
Jet lance............................................................................... 91096768
Adjustable flat-jet nozzle ........................................................ 91096767
High-pressure nozzle ............................................................. 91096765
Cleaning agent ..................................................................... 30990010
GB
Trouble shooting
Problem
Washer
is not
operating
Washer
does not
transport
water
Possible cause
ON / OFF switch ( A 5) is
turned off
Check ON / OFF switch.
Damaged power supply cable
( A 8)
Check power supply cable ( A 8) for
damage. If necessary have the power
supply cable replaced by a qualified
electrician.
Mains fault
Check the electrical system for conformity with the data on the rating plate.
Air trapped in the pressure
washer
Air trapped in the pressure
Washer
does not ge- washer
nerate any
Drop in the water mains
pressure
pressure
Severe
pressure
fluctuations
Remedy
High-pressure nozzle ( A 13)
is dirty
Switch on the equipment and pull the
lever of the gun ( A 10).
Bleed the equipment, see steps 5. - 8.
Turn on the washer with high-pressure
hose until bubble-free water flows out of
the high-pressure connection ( A 3).
Check the water mains.
Rinse the high-pressure nozzle ( A
13) with water. If necessary clean the
nozzle hole with a needle.
Clean the high-pressure nozzle ( A 13)
with the nozzle cleaning pin.
27
GB
Translation of the
original EC declaration
of conformity
We hereby confirm that the
Pressure Washer
Design Series PHD 100 E2
Serial number
201504000001 - 201504170000
DE
AT
conforms with the following applicable rele- folgenden einschlägigen EU-Richtlinien in ihvant version of the EU guidelines:
rer jeweils gültigen Fassung entspricht:
2004/108/EC • 2000/14/EC
2006/42/EC • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as
national standards and stipulations have
been applied:
EN 60335-1:2012 • EN 60335-2-79:2012 • EN 62233:2008 • EN 55014-1/A2:2011
EN 55014-2:1997+A1:2001+A2:2008 • EN 61000-3-2/A2:2009 • EN 61000-3-3:2008
We additionally confirm the following in accordance with the 2000/14/EC emissions
guideline:
Guaranteed sound power level: 98 dB(A)
Measured sound power level: 94.2 dB(A)
Compliance evaluation process carried out
in accordance with Appendix V,
2000/14/EC
Die alleinige Verantwortung für die AusstelThis declaration of conformity is issued under
lung dieser Konformitätserklärung trägt der
the sole responsibility of the manufacturer:
Hersteller:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim, 27.04.2015
Germany
* The object of the declaration described above
satisfies the provisions of Directive 2011/65/
EU of the European Parliament and the Council of
8 June 2011 on limiting the use of certain harmful
substances in electrical and electronic appliances.
28
informativ, informative
20150324_rev02_gs
29
C
13
12
11
D
10
E
10
9
15
F
16
16
16
16
Stand der Informationen · Last Information Update:
03 / 2015 · Ident.-No.: 75041441032015-DE/AT
20.03.15 12:25