Dell S520 Projector User's Guide

Replacing the Dell™ S520 Projector Lamp
Ersetzen der Dell™ S520 Projektorlampe
Remplacer la Lampe du Projecteur Dell™ S520
Cambio de la lámpara del proyector Dell™ S520
Sostituzione della lampada del proiettore Dell™ S520
Substituir a lãmpada do projetor S520 Dell™
Dell™ S520 プロジェクターランプの交換
Dell™ S520 投影仪的灯泡更换
Замена проекционной лампы Dell™ S520
Dell™ S520 Projektör Lambasını Değiştirme
www.dell.com/support
About Cautions and
Warnings
CAUTION: A CAUTION indicates potential damage to hardware or
loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage,
personal injury, or death.
____________________
Information in this document is subject to change without notice.
© 2013 Dell Inc. All rights reserved. Printed in China. Printed on recycled paper.
Reproduction of these materials in any manner whatsoever without the written
permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; DLP
and DLP® logo are trademarks of TEXAS INSTRUMENTS INCORPORATED.
Other trademarks and trade names may be used in this document to refer to either
the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model S520
Replacing the Dell™ S520 Projector Lamp
The following message appears on the screen when your projector lamp
is approaching its end of life and needs to be changed:
Lamp is approaching the end of its useful life in the operation.
Replacement suggested! www.dell.com/lamps
CAUTION: Before you begin any of the procedures in this section,
follow the Safety Instructions in the user’s manual.
To replace the lamp:
1 Turn off the projector and disconnect the power cable.
WARNING: The lamp becomes very hot when in use. Do not
attempt to replace the lamp until the projector has been allowed
to cool down for at least 30 minutes.
2 Let the projector cool for at least 30 minutes.
3 Loosen the screws that secure the lamp cover, and remove the cover.
CAUTION: Do not touch the projector lamp or the lamp glass at any
time. Projector lamps are very fragile and may shatter if touched.
CAUTION: If the lamp shatters, remove all the broken pieces from
the projector and dispose or recycle according to state, local, or
federal law. For more information see www.dell.com/hg.
4 Loosen the two screws that secure the lamp.
5 Pull the lamp up by its metal handle.
6 Replace with the new lamp.
NOTE: Dell™ may require lamps replaced under warranty to be
returned. Otherwise, dispose or recycle the lamp.
7 Tighten the two screws that secure the lamp.
8 Replace the lamp cover and tighten the screws.
9 Reset the lamp usage time. (See Changing the Lamp in the User's Guide.)
CAUTION: Lamp Disposal (for the US only)
- LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND
MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL,
STATE OR FEDERAL LAWS. FOR MORE INFORMATION, GO TO
WWW.DELL.COM/HG OR CONTACT THE ELECTRONIC INDUSTRIES
ALLIANCE AT WWW.EIAE.ORG. FOR LAMP-SPECIFIC DISPOSAL
INFORMATION, CHECK WWW.LAMPRECYCLE.ORG.
September 2013 Rev. A00
Septembre 2013 Rev. A00
Septiembre de 2013 Rev. A00
Settembre 2013 Rev. A00
本文所用商标：Dell、 DELL 徽标是 Dell Inc. 的商标； DLP 和 DLP® 徽标是 TEXAS
INSTRUMENTS INCORPORATED 的商标。
本文档中可能用到的其它商标和品牌名称是指拥有该商标或名称的实体或其产品。
型号 S520
2013 年 9 月 Rev. A00
0V10N4A00