Tenda D301v4 N300 Wi-Fi ADSL Modem Router Installation Guide
Tenda D301v4 is a versatile and reliable N300 Wi-Fi ADSL2+ Modem Router that provides a stable and secure internet connection for your home or small office. With its intuitive interface and advanced features, the D301v4 makes it easy to set up and manage your network. Connect wired devices via its four LAN ports or establish a wireless connection using its powerful Wi-Fi capabilities. The D301v4 also includes a built-in ADSL2+ modem for connecting to high-speed internet.
Advertisement
Advertisement
Quick Installation Guide
N300 Wi-Fi ADSL2+ Modem Router
D301V4
Package contents
Modem router
Power adapter
Ethernet cable (RJ45)
Phone cable (RJ11)
ADSL splitter
Quick installation guide
If any item is missing or damaged, please keep the original package and contact the local reseller or distributor immediately.
For product or function details, please go to http://www.tendacn.com
N300 Wi-Fi ADSL2+ Modem Router
D301V4
Package contents
Modem router
Power adapter
Ethernet cable (RJ45)
Phone cable (RJ11)
ADSL splitter
Quick installation guide
If any item is missing or damaged, please keep the original package and contact the local reseller or distributor immediately.
For product or function details, please go to http://www.tendacn.com
Getting to know your modem router
LED indicators
LED indicator Status Description
Power LED indicator
Solid on The modem router is connected to a power source properly.
Off The modem router is not powered on.
Internet LED indicator
Solid on The modem router is connected to the internet successfully.
Off The modem router fails to connect to the internet.
WPS LED indicator
Solid on for 5
mins->Off A WPS connection is established.
Blinking The modem router is performing WPS negotiation.
Off The WPS feature is disabled, or the WPS feature is enabled but the
modem router does not perform WPS negotiation.
WiFi LED indicator
Solid on The WiFi network is enabled.
Off The WiFi network is disabled.
LAN 1/2/3/4 LED
indicator
Solid on The corresponding LAN port is connected properly.
Off The corresponding LAN port is disconnected, or not connected
properly.
DSL LED indicator
Solid on The DSL negotiation succeeds.
Blinking The modem router is performing DSL negotiation.
Off The port is disconnected, or not connected properly.
LED indicators
LED indicator Status Description
Power LED indicator
Solid on The modem router is connected to a power source properly.
Off The modem router is not powered on.
Internet LED indicator
Solid on The modem router is connected to the internet successfully.
Off The modem router fails to connect to the internet.
WPS LED indicator
Solid on for 5
mins->Off A WPS connection is established.
Blinking The modem router is performing WPS negotiation.
Off The WPS feature is disabled, or the WPS feature is enabled but the
modem router does not perform WPS negotiation.
WiFi LED indicator
Solid on The WiFi network is enabled.
Off The WiFi network is disabled.
LAN 1/2/3/4 LED
indicator
Solid on The corresponding LAN port is connected properly.
Off The corresponding LAN port is disconnected, or not connected
properly.
DSL LED indicator
Solid on The DSL negotiation succeeds.
Blinking The modem router is performing DSL negotiation.
Off The port is disconnected, or not connected properly.
Buttons & ports
Port/jack Description
PWR Power jack. Use the included power adapter to connect this jack to a power source for power
supply.
LAN1/2/3/4 LAN ports. Used to connect to wired devices, such as computers.
DSL DSL port. Used to connect to a phone jack for internet access.
Button Description
WLAN/WPS
Press and hold this button for less than 1 second to enable the WiFi network.
Press and hold this button for 1 to 3 seconds to enable the WPS feature.
Press and hold this button for about 6 seconds to disable the WiFi network.
RST Reset button. Hold down this button for about 6 seconds to restore factory settings. When all LED
indicators turn off then light up, the modem router is reset successfully.
ON/OFF Power on/off button. Press this button to turn on/off the modem router.
Port/jack Description
PWR Power jack. Use the included power adapter to connect this jack to a power source for power
supply.
LAN1/2/3/4 LAN ports. Used to connect to wired devices, such as computers.
DSL DSL port. Used to connect to a phone jack for internet access.
Button Description
WLAN/WPS
Press and hold this button for less than 1 second to enable the WiFi network.
Press and hold this button for 1 to 3 seconds to enable the WPS feature.
Press and hold this button for about 6 seconds to disable the WiFi network.
RST Reset button. Hold down this button for about 6 seconds to restore factory settings. When all LED
indicators turn off then light up, the modem router is reset successfully.
ON/OFF Power on/off button. Press this button to turn on/off the modem router.
I Connecting the modem router
1. Use a phone cable to connect the phone jack to the LINE port of the included ADSL splitter.
2. (Optional) If you do not use the phone service, skip this step. Use a phone cable to connect your phone to the PHONE port
of the ADSL splitter.
3. Use a phone cable to connect the MODEM port of the ADSL splitter to the DSL port of the modem router.
4. Use the included power adapter to connect the modem router to a power source, and turn it on. The LED indicator blinks
red slowly.
5. If you use a wireless device, such as a smart phone for setup, connect it to the WiFi network of the modem router using
the default SSID labeled on the bottom of the modem router. By default, the WiFi password is not required.
If you use a wired device, such as a computer for setup, connect it to port LAN1, LAN2, LAN3 or LAN4 of the modem
router.
II Configuring the modem router
1 Configuring your ADSL connection
Prerequisites
Before configuration, you need to get the following parameters from your internet service provider (ISP):
VPI and VCI values
Channel Mode (internet connection type)
PPPoE User Name and Password OR IPoE Local IP Address and related parameters (if any)
Your IP protocol type: IPv4, IPv6 or IPv4/IPv6
Configuration procedure
1. Start a web browser on the device connected to the modem router, and visit 192.168.1.1.
2. Enter the default User Name and Password, both are admin, and click Login.
1. Use a phone cable to connect the phone jack to the LINE port of the included ADSL splitter.
2. (Optional) If you do not use the phone service, skip this step. Use a phone cable to connect your phone to the PHONE port
of the ADSL splitter.
3. Use a phone cable to connect the MODEM port of the ADSL splitter to the DSL port of the modem router.
4. Use the included power adapter to connect the modem router to a power source, and turn it on. The LED indicator blinks
red slowly.
5. If you use a wireless device, such as a smart phone for setup, connect it to the WiFi network of the modem router using
the default SSID labeled on the bottom of the modem router. By default, the WiFi password is not required.
If you use a wired device, such as a computer for setup, connect it to port LAN1, LAN2, LAN3 or LAN4 of the modem
router.
II Configuring the modem router
1 Configuring your ADSL connection
Prerequisites
Before configuration, you need to get the following parameters from your internet service provider (ISP):
VPI and VCI values
Channel Mode (internet connection type)
PPPoE User Name and Password OR IPoE Local IP Address and related parameters (if any)
Your IP protocol type: IPv4, IPv6 or IPv4/IPv6
Configuration procedure
1. Start a web browser on the device connected to the modem router, and visit 192.168.1.1.
2. Enter the default User Name and Password, both are admin, and click Login.
5
6
7
8
9
Advertisement