Safety during the operation of electric appliances. Wacker Neuson EH 9 BL/115, EH 9 BLM/115, EH 9 BLM/230
Add to My manuals54 Pages
advertisement
![Safety during the operation of electric appliances. Wacker Neuson EH 9 BL/115, EH 9 BLM/115, EH 9 BLM/230 | Manualzz Safety during the operation of electric appliances. Wacker Neuson EH 9 BL/115, EH 9 BLM/115, EH 9 BLM/230 | Manualzz](http://s3.manualzz.com/store/data/054368009_1-697fb8c4a233fc9283612763b72763e8-360x466.png)
EH 9 Safety
Safe working with the hammer
Keep the tool holder closed during operation.
Guide the power cable always from the machine to the rear and keep the power cable away from the working range of the machine.
3.7
Safety during the operation of electric appliances
Specific regulations for electrical appliances
Observe the safety information provided in the brochure
General Safety Rules
which is included in the scope of delivery of your machine.
Also observe the country-specific regulations, standards and guidelines in reference to accident prevention in connection with electrical equipment and machines.
WARNING Read all safety information and instructions.
Failure to follow the safety information and instructions may result in electric shock, fire and/or serious injury.
Save all safety information and instructions for future reference.
Electric power supply for electrical appliances of class rating II
Note:
The rated voltage is indicated on the nameplate of your machine.
The machine may only be connected to an electric power supply with all machine parts in proper working condition. Take special notice of the following components:
Plug.
Power cable over the entire length.
Switch diaphragm of the ON/OFF switch, if there is one.
Plug receptacles.
Electrical appliances of class rating II have a strengthened or double insulation
(protective insulation). They have no connection to the grounded conductor.
There must be at least one of the following safety devices if connected to a stationary or mobile generator:
Fault current protective switch.
Isolation (earth leakage) monitor.
IT-net.
Note:
Observe the respective national safety regulations!
17
advertisement
Related manuals
advertisement
Table of contents
- 6 Means of representation for this operator's manual
- 7 Wacker Neuson representative
- 7 Described machine types
- 8 Identification of the machine
- 9 Principle
- 12 Qualification of the operating personnel
- 13 Protective gear
- 14 Transport
- 14 Operating safety
- 16 Safety during the operation of hand machines
- 17 Safety during the operation of electric appliances
- 18 Maintenance
- 20 Safety and information labels
- 22 Application
- 22 Functionality
- 23 Components and operator's controls
- 26 Prior to starting the machine
- 27 Adjusting the machine
- 27 Speed/rpm
- 28 Supplementary handle
- 30 Changing tools
- 30 General instructions
- 31 Tool holder SDS-max
- 34 Tool holder for tool with hexagonal bolt
- 35 Starting up
- 36 Decomissioning
- 37 Maintenance schedule
- 38 Maintenance work
- 38 Cleaning the machine
- 39 Lubricating the crank mechanism
- 40 Checking the tool holder for wear
- 42 10.1 Disposal of waste electrical and electronic equipment
- 44 12.1 EH 9 BL/BLM
- 46 12.2 EH 9 BL/BLM
- 47 12.3 Extension cable