Supplementary handle. Wacker Neuson EH 9 BL/115, EH 9 BLM/115, EH 9 BLM/230
Add to My manuals54 Pages
advertisement
▼
Scroll to page 2
of
54
Use and operation EH 9
7.2.2
Supplementary handle
Adjusting the supplementary handle
Only operate the machine with the supplementary handle. The illustration below depicts the adjustment options.
Adjusting the offset handle
Note:
The offset handle is not present for all machines.
28
Item Designation
1 Offset handle
2 Clamping wheel
1. Loosen the clamping wheel by turning counterclockwise.
2. Swivel offset handle to desired position (take note of lock-in positions).
3. Tighten the clamping wheel by turning clockwise.
EH 9
Changing position of the radial handle
Use and operation
Item Designation
1 Radial handle
1. Remove the radial handle by turning it counterclockwise.
2. Attach radial handle to desired position (supplementary handle or housing) using screw.
29
advertisement
Related manuals
advertisement
Table of contents
- 6 Means of representation for this operator's manual
- 7 Wacker Neuson representative
- 7 Described machine types
- 8 Identification of the machine
- 9 Principle
- 12 Qualification of the operating personnel
- 13 Protective gear
- 14 Transport
- 14 Operating safety
- 16 Safety during the operation of hand machines
- 17 Safety during the operation of electric appliances
- 18 Maintenance
- 20 Safety and information labels
- 22 Application
- 22 Functionality
- 23 Components and operator's controls
- 26 Prior to starting the machine
- 27 Adjusting the machine
- 27 Speed/rpm
- 28 Supplementary handle
- 30 Changing tools
- 30 General instructions
- 31 Tool holder SDS-max
- 34 Tool holder for tool with hexagonal bolt
- 35 Starting up
- 36 Decomissioning
- 37 Maintenance schedule
- 38 Maintenance work
- 38 Cleaning the machine
- 39 Lubricating the crank mechanism
- 40 Checking the tool holder for wear
- 42 10.1 Disposal of waste electrical and electronic equipment
- 44 12.1 EH 9 BL/BLM
- 46 12.2 EH 9 BL/BLM
- 47 12.3 Extension cable