- Industrial & lab equipment
- Electrical equipment & supplies
- Power generators
- Wacker Neuson
- GV7003A
- User manual
advertisement
▼
Scroll to page 2
of
54
![Spark plug. Wacker Neuson GV7000A, GV7003A | Manualzz Spark plug. Wacker Neuson GV7000A, GV7003A | Manualzz](http://s3.manualzz.com/store/data/054369707_1-fa07a66c84c42769da6a1a7f570f6106-360x466.png)
8 Maintenance
8.4
Spark plug
See blueprint: wc_gr000028
Clean or replace the spark plug as needed. See engine manual.
The exhaust will become very hot during operation and also remains hot for a while after the engine is switched off. Never touch a hot exhaust.
WARNING
Comment:
See the technical data for the recommended spark plug and spark plug air gap.
1. Remove and check the spark plug.
2. Replace the spark plug if the isolator is cracked or split.
3. Clean spark plug electrodes with a wire brush.
4. Adjust the spark plug air gap
(a)
.
5. Screw in and tighten the spark plug.
NOTE
:
A loose spark plug can become very hot and lead to engine damage.
100_0402_mt_0001.fm
37
advertisement
Related manuals
advertisement
Table of contents
- 6 Means of representation of this operator's manual
- 7 Wacker Neuson Contact partner
- 7 Described equipment types
- 8 Product identification of the equipment
- 9 Safety information in this operator's manual
- 10 Description and purpose of the machine
- 11 Operational safety
- 12 Operator qualifications
- 15 Safety when using combustion engines
- 16 Service safety
- 22 Prepare the machine for first-time application
- 23 Power requirements
- 24 Installation
- 24 Current depreciation
- 26 Ground
- 26 Heavy duty operation
- 27 Use of extension cables
- 29 Control Panel
- 31 Before starting
- 32 7.10 Starting
- 32 7.11 Stopping
- 33 7.12 Emergency stop procedure
- 34 Period maintenance schedule
- 35 Engine oil
- 36 Air cleaner maintenance
- 37 Spark plug
- 38 Engine speed
- 39 Long-term storage
- 41 10.1 Disposal of old electrical and electronic equipment
- 42 11.1 GV
- 44 11.2 GV
- 46 11.3 Combustion engine
- 49 13.1 GV 7000A - Wiring diagram
- 50 13.2 GV 7003A - Wiring diagram