advertisement
Selecting the color temperature
The color temperature modes change the color tones of the picture.
Press
MENU
until the Picture 2 menu is displayed on-screen.
Press • or • until COLOR
TEMPERATURE is displayed in purple.
COLOR
TEMPERATURE : [ COOL ] MED I UM WARM
H
MOVE[V A] SELECT[_ _I
Note:
The RESETfunction returns the picture and audio functions to the following factory settings:
iii
5 ii i i I iii_!_
i
_iii I i ii_ i_
3
Press • or I_ until the desired mode is displayed in purple.
COOL
MEDIUM
WARM
Bluish
Neutral
Reddish
COOL MEDIUM [WARM]
MOVE[V
&]
SELECT[_ _] i ¸
Selecting the picture preference function
You can adjust the picture qualities to one of the following modes:
NORMAL
THEATER
MEMORY
Normal picture qualities (factory-set)
Movie-like picture qualities (factory-set)
The picture qualities you adjusted
(see "Adjusting the picture quality" on page 20 and "Selecting the color temperature" above)
Press
MENU
until the Picture 2 menu is displayed on-screen.
Press • or • until PICTURE
PREFERENCE is displayed in purple.
3
Press • or I_ until the desired mode is displayed in purple.
co_o;_
PICTURE
PREFERENCE:[NORMAL]
MEMORY
THEATER
MOVE[V
&]
SELECT[_ _]
_i ! !!ii_i
i NORMAL THEATER
[MEMORY]
MOVE[V
&]
SELECT[_ _]
21
Adjusting the sound
You can adjust the sound quality (BASS, TREBLE and BALANCE) to suit your taste.
MENU TV / VIDEO VOLUME CHANNEL
MENU
I-,--V--lk
,I/1_ •/•
......
Adjusting the sound quality
displayed on-screen.
2 Press • or • until the item you want to adjust is displayed in purple (bass, treble, or balance).
3
Press
<
or _ to adjust the level.
BASS
TREBLE
BALANCE
-"''""''|'''"'''+
--,,--,,|,,,-,,,+
-=,,==,,|,,,=,,,+
MOVE[Y AI SELECT[4 ,]
BASS
- -,,--,,--,
I--,, +
POWER
RECALL MUTE
Q ®
©®®
®®®
©®®
@®@
CH RTN
MOVE[Y A] ADJUST[_ _]
</1_ --
--•/•
MENU --_
FAV CH TV/VIDEO r-v-i r-x-i r-_-i
REC TVMCR STOP
PLAY
r-_ IZ3 [-iq r-_
STILL SOURCE
SLOW PAUSE REW
PiP
VPIP OH A LOCATE SWAP
TOSHIBA
22
Using the off-timer (sleep timer)
You can use the off-timer to set the TV to turn off automatically after a specified amount of time (in 10-minute increments up to 3 hours).
MENU TV [VIDEO VOLUME CHANNEL
41-I_--V-A
MENU "ql/l_ V/l,
POWER
Setting the off-timer
1 Press
MENU
until the Setup menu is displayed on-screen.
TIMER:
TV/CABLE:
CH PROGRAM
0 MIN
[TV]CABLE
ADD/ERASE:
V-CHIP CONTROL
FAVORITE CH
[ADD]ERASE
MOVE[Y
&]
SELECT[_ _]
2
Press • or • until TIMER is displayed in purple.
TIMER:
;
/
0 MIN v
,/I_ --
RECALL MUTE
Q ®
©®®
®®®
©®®
@®@
CH RTN
--POWER
MOVE[Y A] SELECT[_ _]
3
Press _I/1_ to enter the length of time until the TV turns off (in 10-minute increments to a maximum of 180 min.).
t
0---+10 • 170---+180 MIN
I
TIMER:
;//
(;_i_ ¸¸ CO_ R(_
30 MIN
R;
MOVE[V A] SELECT[_ _]
--•IV
Canceling the off-timer
Press
POWER
two times, once to turn the TV off and once to turn it on again.
REC
FAV CH TV/VIDEC r-_-i r-_ r--_-i
TWVCR STOP PLAY
STILL SOURCE
REW
PtP
VPIP OH & LOCATE SWAP
TOSHIBA
!1117 ii:!_il
i i
5 i i i ¸ ii i!_
_( _iii
23
Selecting stereo/SAP broadcasts
The MTS (multi-channel TV sound) feature has the following functions:
• Stereo Sound: Select either high fidelity stereo sound or monaural (mono) sound.
• SAP: Activate the SAP (second audio program), which replaces the regular audio with a second language or other information (when provided by individual stations).
• Surround Sound: Activate the surround sound effect.
MENU TV / VIDEO VOLUME CHANNEL
MENU
,-I_--w-A
•/1_ V/•
RECALL@ MUTE@
©®®
®@@
©@@
®®@
OH RTN
--•IV
POWER
Listening to stereo sound
When the TV receives a stereo broadcast, the word "STEREO" displays on-screen every time you turn on the TV, change the channel, or press
RECALL.
To select the STR (stereo) mode:
1 Press MENU until the Audio menu is displayed on-screen.
2
Press • or • until MTS is displayed in purple, if a stereo broadcast is being received, "STR" will display in yellow in the menu.
3
Press • or I_ until STR is displayed in purple.
in general, you can leave the TV in STR
(stereo) mode because it automatically outputs the type of sound being broadcast
(stereo or mono).
if the stereo sound is noisy, select MONO to reduce the noise.
STEREO
MTS:
TV 4
STR SAP [MONOI
MOVE[T A I SELECT[4 _-]
;
[ STR I
MOVE[Y
&I
SELECT[4 _'I
MENU --
FAV CH TV/VIDEC r-_ r-_ _
REC TV/VCR STOP PLAY r-_ (_3 I-in r-_
STILL SOURCE PIP
SLOW PAUSE REW cn r -n
VPtP
CHA LOCATE SWAP
TOSHIBA
Note: The MTS feature is not available
when the IV is in VIDEO mode.
Activating the surround sound
effect
1
2
3
4
Select the STR (stereo) mode as described above.
Press
MENU
until the Audio menu is displayed on-screen.
Press • or • until SURROUND is displayed in purple.
Press • or I_ to select ON.
in general, you can leave the SURROUND mode on because it automatically outputs the type of sound being broadcast (surround/ stereo or mono).
To deactivate the surround sound effect:
Select OFF in step 4 above.
SURROUND: ON[OFF I
MOVE[_V A) SELECT[_I I_ I
MOVE[_ A I SELECT[_I 1,.]
24
advertisement