Intensive drying. Bosch Dishwasher

Intensive drying

The final rinse uses a higher temperature which improves the drying result.

The running time may increase slightly.

(Caution if utensils are delicate!)

– Close the door.

– Hold down programme button

# and press main switch

( until the digital display illuminates.

– Release both buttons.

The LED for button

#

flashes and the digital display

8

displays the setting

‹

(off) or

‚

(on).

To change the setting:

– By pressing the button

#

, you can switch intensive drying on

‚ or off

‹

.

– Switch off the main switch

(

.

The set value is saved. en

Maintenance and care

A regular inspection and maintenance of your machine will help to prevent faults.

This saves time and prevents problems.

Overall condition of the machine

– Check spray arm for grease and limescale deposits.

If you find such deposits:

– Fill detergent dispenser with detergent.

Start the appliance without utensils in the programme with the highest rinsing temperature.

Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers.

– Regularly clean door seal with a damp cloth.

Never use a steam cleaner to clean your dishwasher. The manufacturer is not liable for any consequential damage.

Regularly wipe the front of the appliance and fascia with a damp cloth; water and a little washing up liquid are adequate. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces.

Stainless steel appliances: To prevent corrosion, avoid using sponge cloths or wash them out thoroughly several times before using for the first time.

ã=

Warning

Never use other chlorinated household detergents! Health hazard!

Special salt and rinse aid

– Check the refill indicators

P

and

X

. If required, refill salt and/or rinse aid.

17