advertisement
Advanced Features
Advanced Call Features
Selective Call (ASTRO Conventional Only)
This feature allows you to receive a call from a specific individual with privacy.
Receiving a Selective Call
When you receive a Selective Call, you hear two alert tones and the LED lights up solid yellow. The backlight of the screen turns green momentarily and the display briefly shows
CALL RCV
.
The speaker unmutes.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
You cannot initiate a Selective Call.
Responding to the Dynamic Regrouping Feature
(Trunking Only)
This feature allows the dispatcher to temporarily reassign selected radios to a particular channel where they can communicate with each other. This feature is typically used during special operations and is enabled by a qualified radio technician.
You will not notice whether your radio has this feature enabled until a dynamic regrouping command is sent by the dispatcher.
Note:
If you try to access a zone or channel that has been reserved by the dispatcher as a dynamically regrouped mode for other users, you hear an invalid tone.
When your radio is dynamically regrouped, it automatically switches to the dynamically regrouped channel. You hear a Gurgle tone and the display shows the dynamically regrouped channel’s name.
Press the PTT button to talk. Release PTT button to listen.
When the dispatcher cancels dynamic regrouping, the radio automatically returns to the zone and channel
45
English
advertisement