advertisement
78
This feature enables you to reduce the transmit power level for specific case that requires a lower power level. You can select the power level at which your radio transmits. The radio always turns on to the default setting. These reduced transmit power level settings do not affect the receiving performance of your radio, nor diminish the overall quality of the audio and data functionality of the radio given the following conditions.
Power level
Low
enables a shorter transmitting distance and to conserve power. Power level
High enables a longer transmitting distance.
Use the preprogrammed Transmit Power Level switch to toggle the power level between low and high power.
The display shows
LOW PWR
and the low power icon or the display shows
HIGH PWR
and the high power icon.
Controlling the Display Backlight
You can enable or disable the radio’s display backlight as needed, if poor light conditions make the display or keypad difficult to read.
Note:
The backlight remains on for a preprogrammed time before it automatically turns off completely or returns to the minimum backlight level.
The preprogrammed Light/Flip button of the accessories connected to the radio such as
Display Remote Speaker Microphone (DRSM) is disabled when the radio is in Night Vision
Goggles (NVG) display mode.
Perform one of the following actions:
• To toggle the backlight on or off, press the preprogrammed Light/Flip button.
• To turn the backlight on, press any programmable radio controls or buttons.
Setting Up the Radio Display and Visual Indicators to
Suit Night Vision Goggles
During tactical nighttime operations of military entities worldwide, the Night Vision Goggles (NVG) is used to see in the dark. Your radio is 3rd generation NVG compatible. When the radio is in NVG display mode, the radio's front display and top display emit a very
English
advertisement