Diopter adjustment. Konica-Minolta DYNAM40, MAXXUM 50, DYNAX40M, DYNAX 30, 50, DYNAX 40

Close the back cover. The camera automatically advances the film to the first frame. Take care not to catch the strap when closing the cover.

If the film is loaded correctly, the frame counter indicates the first frame. The film speed (ISO) is displayed on the data panel for 5 seconds.

If the film is loaded incorrectly, 0 blinks in the frame counter. Reload the film.

Camera Notes

Do not use Polaroid Instant 35mm film; winding problems may occur.

Infrared film cannot be used as the camera’s frame counter sensor will fog the film. No more than 40 exposures can be taken on one roll. When using

72-exposure film, the camera rewinds the roll after the 40 th exposure.

When using DX-coded film, the film speed is set automatically in one Ev increments from ISO 25 to ISO 3200: 25, 50, 100, 200, 400, 800, 1600, and 3200. Film with speeds not listed are automatically set to the first value below the rated ISO. For example, ISO 125 film is set to ISO 100.

Film speed can be set manually in 1/3 Ev increments with the function dial, see page 51.

17