Menu Operations. Canon EOS 350D, 0206b003 - EOS Digital Rebel XT Camera SLR, 0209B001 - EOS Digital Rebel XT, 0209B006 - Digital Rebel XT 8MP SLR Camera, EOS Digital Rebel XTi EF-S 18-55 Kit, EOS Digital Rebel XT, REBEL XT, DS-8, EOS REBEL XT
Add to My manuals172 Pages
advertisement
Menu Operations
With the menus, you can set various settings such as the image recording quality, processing parameters, the date/time, and Custom
Functions. While looking at the LCD monitor, you use the <
M> button, <
S> Cross keys, and <0> button on the camera back.
< M> button
<
C> button
LCD Monitor
< 0> button
< S> Cross keys
Shooting 2 menu
Shooting 1 menu
Tab
Playback menu
Set-up 1 menu
Set-up 2 menu
Menu items Menu settings
Icon Color Category Description z/m
Red Shooting menu Shooting-related menu.
x
Blue Playback menu Image playback-related menu.
c/b
Yellow Set-up menu Camera’s basic settings.
¡ To change the menu tab, press the < C> button.
¡ When a Basic Zone mode is set, there are menu items which will not be displayed. (p.33)
¡ You can also use the < 6> dial to select menu items or playback images.
¡ Even while the menu is displayed, you can instantly go back to shooting by pressing the shutter button halfway.
31
Menu Operations
Menu Setting Procedure
1
Display the menu.
¡ Press the <
M> button to display the menu. To turn off the menu, press the button again.
2
Select a tab.
¡ Press the <
C
> button to select a menu tab.
¡ If the five tabs are highlighted, you can also press the <
U> keys to select a tab.
3
Select a menu item.
¡ Press the <
V> key to select the menu item, then press <
0>.
¡ If you press the <
C> button now, another tab will be selected.
4
Select the menu setting.
¡ Press the < V> or <U> key to select the setting. (Some settings require you to press either the < V> or < U> key to select it.)
5
Set the desired setting.
¡ Press < 0> to set it.
6
Exit the menu.
¡ Press the < M> button to exit the menu display.
32
¡ The explanation of menu functions hereinafter assumes that you have pressed the < M> button to display the menu screen.
¡ Menu operation will also work after the picture is taken while the image is being recorded to the CF card (access lamp blinks).
Menu Operations
Menu Settings (1)
< z> Shooting 1 menu (Red)
Quality
Reference pages
73/83/74/84/76/86/ RAW+7L / RAW 52
Red-eye On/Off Off / On 98
Beep
AF mode
Metering mode
ISO speed
On / Off
ONE SHOT / AI FOCUS / AI SERVO q: Evaluative / w: Partial / e: Center-weighted average metering
100 / 200 / 400 / 800 / 1600
50
70
77
55
< m> Shooting 2 menu (Red)
AEB 1/3-stop increments, ±2 stops
Flash exp comp
White balance
WB SHIFT/BKT
Custom WB
Color space
1/3-stop increments, ±2 stops
Q / W / E / R / Y / U / I / O
WB correction: B/A/M/G bias, 9 levels each
WB-BKT: B/A and M/G bias 1 level, ±3 levels
Manual setting of white balance sRGB / Adobe RGB
Parameters Parameter 1, 2 / Set 1, 2, 3 / B/W
90
100
56
59
60
57
62
63
64
< x> Playback menu (Blue)
Protect Erase-protect image
Rotate
Print order
Auto play
Review time
Rotate vertical image
Specifies images to be printed (DPOF).
Auto playback of images
Off / 2 sec. / 4 sec. / 8 sec. / Hold
115
113
137
112
104
¡ < m> Shooting 2 menu screen/tubs are not displayed in Basic Zone modes.
¡ These shaded menu items are not displayed in Basic Zone modes.
¡ In Basic Zone modes, the RAW+ 7L and RAW recording quality modes are not displayed.
33
Menu Operations
Menu Settings (2)
< c> Set-up 1 menu (Yellow)
Auto power off
Reference pages
1min. / 2 min. / 4 min. / 8 min. / 15 min. / 30 min. / Off 41
Auto rotate
LCD brightness
Date/Time
File numbering
Format
Shoot w/o card
On / Off
5 levels
Setting the date/time
Continuous / Auto reset
Initializes and erases card
On / Off
105
106
37
67
118
41
< b> Set-up 2 menu (Yellow)
15 languages
Language
(English, German, French, Dutch, Danish, Finnish,
Italian, Norwegian, Swedish, Spanish, Simplified
Chinese, Russian, Traditional Chinese, Korean, and Japanese.)
Video system
Communication
Custom Functions
(C.Fn)
NTSC / PAL
Print/PTP / PC connection
Customize the camera
Clear settings
Sensor cleaning
Firmware Ver.
Clear all camera settings (Resets the camera to the default settings.)
Clear all Custom Functions (Resets all Custom
Function settings to the default.)
Select to clean the sensor.
Select to update the firmware.
36
114
121
146
35
147
39
-
These shaded menu items are not displayed in Basic Zone modes.
About the LCD Monitor
¡ The LCD monitor cannot be used as a viewfinder for shooting.
¡ Adjust the LCD monitor’s brightness to one of five levels with the
[ c LCD brightness] menu. (p.106)
34
Menu Operations
Restoring the Camera’s Default Settings N
1
Select [Clear settings].
¡ Select the [ b] tab.
¡ Press the <
V> key to select [Clear
settings], then press <
0>.
2
Select [Clear all camera settings].
¡ Press the <
V> key to select [Clear
all camera settings], then press
<
0>.
Shooting Settings
AF mode ONE SHOT
AF point selection Automatic AF point selection
Metering mode q (Evaluative metering)
Drive mode u (Single shooting)
Exposure compensation
0 (Zero)
AEB
Flash exposure compensation
Off
0 (Zero)
Custom Functions Current settings retained
3
Select [OK].
¡ Press the < U> key to select [OK], then press < 0>. The camera’s default settings will be restored.
s The camera’s default settings will be as shown below.
Image-Recording Settings
Quality
ISO speed
73
100
Color space
White balance
WB correction sRGB
Q (Auto WB)
Off
WB bracketing Off
Parameters Parameter 1
In Basic Zone modes, the camera settings cannot be reset to the default.
35
advertisement
Related manuals
advertisement
Table of contents
- 3 Item Check List
- 8 Handling Precautions
- 10 Quick Start Guide
- 12 Nomenclature
- 18 Conventions Used in this Manual
- 20 Recharging the Battery
- 22 Installing and Removing the Battery
- 24 Using a Household Power Outlet
- 25 Mounting and Detaching a Lens
- 26 Installing and Removing the CF Card
- 28 Basic Operation
- 31 Menu Operations
- 36 Setting the Language
- 37 Setting the Date and Time
- 38 Replacing the Date/Time Battery
- 39 Cleaning the CMOS sensor
- 41 Set the power-off time/Auto power off
- 41 CF Card Reminder
- 42 Dioptric Adjustment
- 42 Holding the Camera
- 44 Using Full Auto
- 46 Basic Zone Modes
- 48 Self-timer Operation
- 49 Wireless Remote Control
- 50 Using the Eyepiece Cover
- 50 Silencing the Beeper
- 52 Setting the Image-recording Quality
- 55 Setting the ISO Speed
- 56 Setting the White Balance
- 57 Custom White Balance
- 59 White Balance Correction
- 60 White Balance Auto Bracketing
- 62 Setting the Color Space
- 63 Selecting the Processing Parameters
- 64 Setting the Processing Parameters
- 67 File Numbering Methods
- 68 Checking Camera Settings
- 70 Selecting the AF Mode
- 73 Selecting the AF Point
- 75 Using Focus Lock
- 76 When Autofocus Fails (Manual Focusing)
- 77 Selecting the Metering Mode
- 78 Selecting the Drive Mode
- 80 Program AE
- 82 Shutter-Priority AE
- 84 Aperture-Priority AE
- 85 Depth of Field Preview
- 86 Manual Exposure
- 88 Automatic Depth-of-Field AE
- 89 Setting Exposure Compensation
- 90 Auto Exposure Bracketing (AEB)
- 92 AE Lock
- 93 Bulb Exposures
- 94 Mirror Lockup
- 96 Using the Built-in Flash
- 101 Using EOS-Dedicated, External Speedlites
- 102 Using Non-Canon Flash Units
- 102 LCD Panel Illumination
- 104 Setting the Image Review Time
- 105 Auto Image Rotation
- 106 Setting the LCD Brightness
- 107 Image Playback
- 110 Single image display, Index Display, Magnified View
- 113 Jump Display, Auto Play, Rotating an Image
- 114 Displaying the Images on TV
- 115 Protecting Images
- 116 Erasing Images
- 118 Formatting the CF Card
- 121 Preparing to Print
- 133 PictBridge / CP Direct / Bubble Jet Direct
- 136 Easy Printing