Machine Information. Brother DCP-J152W

Machine Information

Checking the serial number

You can see the machine’s serial number on the LCD.

a

Press Menu.

b

Press a or b to choose Machine Info.

Press OK.

c

Press a or b to choose Serial No.

Press OK.

Your machine’s serial number will appear on the LCD.

d

Press Stop/Exit.

B

Checking the firmware version

You can see the machine’s firmware version on the LCD.

a

Press Menu.

b

Press a or b to choose Machine Info.

Press OK.

c

Press a or b to choose Version.

Press OK.

Your machine’s firmware version will appear on the LCD.

d

Press Stop/Exit.

B

B

Troubleshooting

Reset functions

The following reset functions are available:

1 Machine Reset

You can reset all the machine’s settings that you have changed, such as the Date and Time.

2 Network

You can reset the print server back to its default factory settings, such as the password and IP address information.

3 All Settings

You can restore all settings to the factory default.

Brother strongly recommends performing this procedure before handing over or disposing of the machine.

B

How to reset the machine

a

Press Menu.

b

Press a or b to choose

Initial Setup.

Press OK.

c

Press a or b to choose Reset.

Press OK.

d

Press a or b to choose the type of reset

(Machine Reset, Network or

All Settings) you want to use.

Press OK.

Press + to confirm.

e

Press + to reboot the machine.

B

B

59