sysTem seTTInGs
Press SETUP on the Remote Control to enter the system setting menu.
Current Item
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry
WiDe
On eng
Off
On
On
Current Item
GOTO GENERAL SETUP PAGE
On the Remote Control, press either the UP or DOWN or LEFT or
RIGHT arrow buttons to move to the desired menu item and press PLAY to select the menu item.
™
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
4:3 pansCan
4:3 leTTerbOx
16:9
GOTO GENERAL SETUP PAGE
set TV Display mode to the correct ratio:
• Press the rIGHT arrow buttons to enter the sub-menu. If you want to set the screen to "WIDE", press the DoWn arrow twice to move your selection until the "WIDE" item is selected, press enTer to select.
• Press seTup to exit these system settings.
noTe: There are three (3) screen ratio modes available: 16:9 WIDE, 4:3LB
(Letter Box) and 4:3PS (Pan Scan). Different disc formats will display different images depending on the screen setting and size used. Here is an example of the different screen ratio format.
11
™
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
On
Off
SET ANGLE MARK
4:3LB Allows you to see movies in their original aspect ratio. The entire frame of the movie will be displayed. 16:9 recorded movies will occupy a smaller portion of the screen and you will see black margins above and below the picture.
4:3PS The movie will be shown in full screen without any black margins. Parts of the image will be cutoff from the right and left side.
16:9 Allows you to see movies in their original aspect ratio.
16:9 Depending on the DVD screen format (e.g.
2.35:1), the wide screen setting may still have black margins above and below the picture.
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On english gerMan frenCh spanish iTalian pOrTuguese
DuTCh
Danish
SET OSD LANGUAGE
12
When playing a DVD disc with the
Angle option set to ON, the screen will display the angle mark. This will give you the possibility to view multiple angle DVDs. When the Angle option is set to OFF, no angle mark will be displayed.
NOTE: DVD must have multiple
angle options for this option to work.
™
To select the language for your On
Screen Display (OSD) use this menu item. There are multiple languages available.
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
On
Off
CAPTIONS
on: To display captions (Subtitles).
off: Captions will not be displayed
(No Subtitles)
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
On
Off
SCREEN SAVER
When there is no activity with the player for some time, a screen saver will start to prevent damage to the screen. Select on to activate the screen saver function or select off to deactivate this function.
--GENERAL SETUP PAGE--
TV Display angle Mark
OsD language
CapTiOns sCreen saVer lasT MeMOry ps
On eng
Off
On
On
On
Off
SET LAST MEMORY STATE
on: When you turn off the player, it will memorize the last play time. So if you turn on the player the next time and the same disc is played, it will resume play from the last memory point.
off: Disable the last memory function.
13
™
--AUDIO SETUP PAGE-analOg auDiO seTup equalizer
3D prOCessing hDCD
GOTO AUDIO SETUP PAGE
Press enTer to enter the Analog Audio setup page. The next page will be shown:
--ANALOG AUDIO SETUP PAGE--
DOWnMix sTr lT/rT sTereO
--EQUALIZER PAGE-sOunD MODe bass bOOsT super base
Treble bOOsT
Off
Off
Off
Off
Off rOCk pOp liVe
DanCe
TeChnO
ClassiC sOfT
SELECT EQUALIZER TYPE
Select the eQualIZer menu item to setup your preferred Equalizer mode. Press
enTer to enter this selection.
You can select one of these preset Equalizer modes to adjust the audio signal to your liking.
--EQUALIZER PAGE-sOunD MODe bass bOOsT super base
Treble bOOsT
Off
Off
Off
Off
On
Off
SET DOWNMIX MODE
Set sound mix output mode:
-Press the rIGHT arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to "STEREO"; press the DoWn arrow once to move the selection to "STEREO", than press
enTer.
-If you want to have Dolby Pro Logic stereo
(the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select "LT/RT" then press ENTER.
BASS BOOST
--EQUALIZER PAGE-sOunD MODe bass bOOsT super base
Treble bOOsT
Off
Off
Off
Off
On
Off
SUPER BASS
You can select one of these modes to adjust the Bass and Treble signal to your liking. on will switch the selected mode on and off will switch it back to normal Audio playback.
noTe: Please be advised that sometimes the
BASS on an Audio CD or DVD is already very low, using the Bass Boost or Super Bass can overload your speakers resulting in poor sound quality.
--EQUALIZER PAGE-sOunD MODe bass bOOsT super base
Treble bOOsT
Off
Off
Off
Off
On
Off
TREBLE BOOST
14
--3D PROCESSING PAGE-prO lOgiC ii reVers MODe Off
Off
COnCerT liVing rOOM hall baThrOOM
CaVe arena
ChurCh
REVERB MODE
Select 3D processInG to setup your preferred 3D mode. Press play to enter this selection and to set up your preferred
Audio mode for a better surround effect.
Press enTer or the rIGHT arrow to enter this selection.
--VIDEO SETUP PAGE--
COlOr seTTing
GO TO VIDEO SETUP PAGE
Select this menu item to setup your Video
Quality modes. Press enTer to enter this selection.
COLOR SETTING SETUP filTer 1x Off
1x
2x
FILTER
Select HDCD to setup your preferred Audio mode for HDCD. Press enTer to enter this selection and to setup your preferred filter mode for HDCD (default is 1X).
1x = 48K Sampling, 2x = 96K Sampling
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
00
00
1T
MiO
00
00 nOne high
MeDiuM lOW
SHARPNESS
You can set the picture sharpness to these choices. If a video image is light, select the
loW option. If a video image is dark, select the HIGH option.
™
15
™
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
MiO
00
00 nOne
00
00
1T
BRIGHTNESS
You can set the Brightness to your liking. Press enTer or the rIGHT arrow to enter the brightness control, then press the up or DoWn arrow to adjust the image. Press the
lefT arrow to go back to the menu.
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
00
00
1T
MiO
00
00 nOne
CONTRAST
You can set the Contrast to your liking.
Press enTer or the rIGHT arrow to enter the contrast control, then press the up or DoWn arrow to adjust the image. Press the lefT arrow to go back to the menu.
brightneSS iiiiiiiii.......0
contrASt iiiiiiiiii......0
BRIGHTNESS CONTRAST
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
00
00
1T
MiO
00
00 nOne high
MeDiuM lOW nOne
GAMMA
Gamma refers to the exponent between video or pixel values and the displayed brightness. You can set the Gamma to these choices.
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
MiO
00
00 nOne
00
00
1T
OT
1T
LUMA DELAY
You can adjust the luma Delay
(Luminance Delay) by selecting one of these choices to best suit the brightness of your TV.
16
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
MiO
00
00 nOne
00
00
1T
HUE
COLOR SETTING SETUP sharpness brighTness
COnTrasT gaMMa hue saTuraTiOn luMa Delay
MiO
00
00 nOne
00
00
1T
SATURATION hue iiiiiiiiiiiiii..........0
SAturAtion iiiiiiiiii......0
HUE
You can set the Hue (for NTSC) to your liking. Press enTer or the rIGHT arrow to enter the Hue control, then press the up or DoWn arrow to adjust the image. Press the lefT arrow to go back to the menu.
SATURATION
You can set the Saturation to your liking.
Press enTer or the rIGHT arrow to enter the Saturation control, then press the up or DoWn arrow to adjust the image. Press the lefT arrow to go back to the menu.
-- PREFERENCE PAGE --
TV Type pbC parenTal
DefaulT pal
Off pal
MulTi nTsC
-- PREFERENCE PAGE --
TV Type pbC parenTal
DefaulT pal
Off on off
SET TV STANDARD
Select this menu item to set up your preferred video output format. PAL is commonly used in Europe while NTSC is commonly used in the USA and Japan.
Select mulTI only if your TV supports both formats. The output signal will automatically follow the video format on the DVD disc.
SET PBC STATE
For VCD and SVCD, this selection turns
ON or OFF the Playback Control (PBC) function. VCD or SVCD media have
PBC menus that contain the track list.
The default PBC state is set to ON. In
OFF mode, track(s) cannot be selected.
17
™
™
-- PREFERENCE PAGE --
TV Type pbC parenTal
DefaulT pal
Off
1- kiD SAf
2- g
3- Pg
4- Pg 13
5- Pg r
6- r
7- nc 17
8- ADult
SET PARENTAL CONTROL set age control Grade:
For DVD discs with a rating system programmed (North America CARA) parents can prohibit watching content that might be inadvisable for children.
Press the RIGHT arrow to enter the submenu. If you want to change the age control grade press either the ▲ UP or
DOWN arrow to scroll to the available selections.
Selection 1 is Kid safe.
Selection 2 is General Audiences.
Selection 3 is PG (Parental Guidance
Suggested, some material may not be suitable for children).
Selection 4 is PG-13 (Parents strongly cautioned, some material may be inappropriate for children under 13).
Selection 5 is PG-R (Restricted, under 17 requires accompanying parent or adult guardian).
Selection 6 is Restricted Viewing.
Selection 7 is NC-17 (No one 17 and under admitted).
Selection 8 is for Adult Entertainment or X rated movies.
Hereafter, a screen will indicate to enter a password, if the factory password has never been modified, you can use [123456] by pressing the corresponding number buttons on the remote control. Select “YES” or
“NO” with either the left or right arrow key and press enTer to confirm.
-- PREFERENCE PAGE --
TV Type pbC parenTal
DefaulT pal
Off reSet
LOAD FACTORY SETTING
With this option you can select to reset to the factory preset values.
-- PASSWORD SETUP PAGE -passWOrD MODe On passWOrD on off
PASSWORD MODE
With this option you can select to set your password protection ON or OFF.
-- PASSWORD SETUP PAGE -passWOrD MODe On passWOrD chAnge
CHANGE PASSWORD
Use this menu to change the factory set password [123456].
OlD passWOrD neW passWOrD
COnfirM pWD ok
18
™
creaTInG a pIn number
Enter the PIN number with the number buttons of the remote control and press
enTer. Now enter the new password and press enTer again. Confirm your new password and press enTer again to save the PIN number. Please write down the PIN number and store in a safe location.
Important: Do noT forget the PIN number, there is no way to retrieve the PIN number if forgotten or lost.
With this selection X you exit the system setup and return to normal viewing of the video.
EXIT SETUP MENU
mp3 / mpeG4 playbacK
The Vizualogic RoadTrip RT Series DVD Player is able to play CD-R/CD-RW recorded with MP3/MPEG4 audio and video files. When a disc with MP3 or
MPEG4 files (including multiple directories) is loaded in the system the following screen will display.
To go to the preferred music or video directory, press the ▲ and/or arrows to scroll to your selection and confirm your choice by pressing the enTer button.
To select your preferred song or video title, press the ▲ and/or arrows to scroll to your selection and confirm your choice by pressing the enTer button. Your selected song or video will now play.
19
™
play mode:
There are five (5) play modes available when playing MP3/MPEG4 (.AV1) recorded discs:
SINGLE - All the songs / videos will be played only once.
REPEAT ONE - The current playing song / video will be repeated.
REPEAT FOLDER - Only the songs / videos of the current folder will be repeated.
FOLDER - Only all the songs / videos of this folder will be played once.
SHUFFLE/RANDOM - The songs / videos will be played in random order.
When the disc is playing, press REPEAT to select your repeat mode, the Display will show:
other functions
Functions such as MUTE, VOLUME, PAUSE, PREVIOUS, NEXT, etc. are also available for MP3/MPEG4 recorded discs. These operations are the same as playing an Audio CD.
20
