Subtitle Language. Sharp DV-S1

H9744RD(EN).qx4 04.7.2 19:29 Page 25

PLAYING A DISC

Subtitle Language

DVD DVD-RW

VR mode

The VCR/DVD allows you to select a language for subtitle during DVD disc (if available) playback.

1

2

3

Press SUBTITLE during playback.

Press SUBTITLE repeatedly to select your desired subtitle language.

• The selected language will be displayed on the display bar at the top of the screen.

To turn off subtitles, press SUBTITLE repeatedly until

OFF appears.

NOTES:

• Some discs allow audio language setting/subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.)

• If the desired language is not shown after pressing SUB-

TITLE several times, the disc does not have subtitles in that language.

• If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Subtitle language setting. If you choose any other languages, ‘---’ will be displayed instead. (Refer to page

29.)

• Pressing SUBTITLE may not work on some DVDs with multiple subtitle languages (e.g. DVDs which allow subtitle language setting on the disc menu).

Camera Angle

DVD

Some DVDs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) icon appears on the screen. If the

ANGLE ICON setting is OFF in the Display setting, the ( ) icon will not appear. (Refer to page 28.)

1

2

Press ANGLE during playback.

• The selected angle will be displayed on the display bar at the top of the screen.

Press ANGLE repeatedly to select your desired angle.

Changing the On-Screen Display

DVD DVD-RW

VR mode

You can check information about the current disc by pressing

DISPLAY on the remote control.

1 Press DISPLAY during playback to show current Chapter.

• The elapsed and remaining playing time of the current chapter will be displayed.

2 Press DISPLAY again to show current Title.

• The elapsed and remaining playing time of the current title will be displayed.

3 Press DISPLAY again.

• The BIT RATE and the current repeat setting will be displayed.

9/49 0:00:00 -0:00:00

• If you are playing a dual layered disc, the layer number will also be displayed ( L0: Layer 0 is playing. L1: Layer

1 is playing).

If you are playing a DVD-RW with the PLAYLIST, the following will also be displayed.

ORG: Playing the ORIGINAL.

PL: Playing the PLAYLIST.

IIII T ORG

4 Press DISPLAY the fourth time to remove the display.

1

2

3

CD VCD without PBC function

Press DISPLAY during playback, the current Track will be displayed on the TV screen.

• The elapsed and remaining playing time of the current track will be displayed.

Press DISPLAY again to show current Total Track.

• The elapsed and remaining playing time of the current total track will be displayed.

Press DISPLAY again to remove the display.

1

2

3

MP3 JPEG

Press DISPLAY during playback of an MP3 or

JPEG disc.

• The name of the file currently in play will be displayed.

Press DISPLAY again to show the track number, the elapsed time (for MP3 only), the repeat status, and the playback status at the top of the screen.

• will be displayed when the repeat play has been selected.

T- indicates Track repeat

G- indicates Group (folder) repeat

A- indicates All (disc) repeat

Press DISPLAY again to exit.

Downloaded From DvDPlayer-Manual.com Sharp Manuals

Downloaded from www.Manualslib.com

manuals search engine

– 25 –

EN