Functional links. Schneider Electric XBT N/R Compact Terminals, Magelis XBT OT

3. Using XBT L100• software

Functional links

Creating links

Links are objects displayed on screen, which are used to allocate functions to the and keys on the display unit keypad.

There are 2 types of link:

- Navigation links: for calling an application or system page

- Functional links of the following type:

- Impulse command

- Toggle command

- Write value

1 to 2 links can be programmed per line (1 link maximum in each direction).

A link can be inserted if:

- The selected page is an application page

- The line where the cursor appears does not already have a link in both directions

- The space available for locating the cursor allows a link to be embedded (a functional link consists of two characters).

- The application language associated with the page currently being printed is the reference language

C

Magelis

XBT ref.

/

Note

/

C - 51

3. Using XBT L100• software

Configuration

This operation is performed by double-clicking on a functional link.

NOTE: For XBT N display units in “control” mode, each page can only contain a maximum of two navigation links (one in each direction)

(vertical scrolling not possible).

C - 52

XBT ref.

/

Note

/

Magelis