Configuring the dialog table. Schneider Electric XBT N/R Compact Terminals, Magelis XBT OT

4. Dialog table

Common data sent/received

- Page number to be processed

- Field number to be entered

Configuring the dialog table

This operation is performed by selecting Dialog Table from the

Configuration menu.

NOTE: To use the dialog table, check the "Use dialog table" box

XBT ref.XBT ref.

/

C - 56

Note

/

Magelis

4. Dialog table

NOTE:

To use a dialog table or an alarm table, the designer specifies the symbol for the equipment in which it will be located, as well as the basic address from which it starts.

Before starting to program the PLC, check that all the words needed for operation of the application are included in the dialog table.

In order for words to be added to the dialog table, the PLC program controlling the application must be modified.

C

Magelis

XBT ref.

/

Note

/

C - 57