7.6.2 Backlight Settings. Venturer HPS9308

7.6.2 Backlight Settings

Here you can set how the display backlight behaves when using this Navigator.

These settings are independent of the settings of the other applications of PNA.

you achieve a longer battery life.

7.6.2.2 Brightness

You can set the backlight level separately for both day and night modes, thus enhancing the effect of the night color scheme.

The values are between 0 and 99, where zero means there is no backlight at all, and

99 represents the maximum backlight value.

7.6.2.1 Power Management

At the top of the screen you can set how the backlight will behave when the screen has not been touched for a while.

Backlight Always On

You can choose to have the remain on.

Smart Power Save

You can also initiate this special feature of this Navigator.

Smart power save will light up the screen only when you press or tap a button, or if this

Navigator has something to show you. After a few seconds the light level decreases, and after aonther few seconds the backlight turns off. This helps

- 73 -

7.6.3 Smart Zoom

Smart Zoom is more than just a usual automatic zoom.

While Navigating a Route :

When approaching a turn, it will zoom in and raise the view angle to let you easily recognize your maneuver at the next junction.

If the next turn is at a distance, it will zoom out and lower the view angle to be flat in order to let you see the road in front of you, or it can even switch to an

Overview mode to let you follow your position on the map.

While Cruising : If there is no active route and you are just driving, Smart Zoom will zoom in if you drive slowly and zoom out to the limit set here when you drive at high speed.