Emptying the Water Container. Amcor NanoMax PORTABLE AIRCONDITIONER, PORTABLE AIRCONDITIONER, NanoMax Series, 9000E

Emptying The Water Container

This portable AC features the

Innovative AutoDrain NanoMist Technology ™

Very little excess water should accumulate. During the process of cooling, some of the water accumulated is actually used to cool the unit internally, making it run more effi ciently. Both this evaporative technology and Innovative AutoDrain NanoMist Technology™ are features not found in most portable air conditioners.

Switch off the unit and remove the plug from the outlet.

• Position a fl at container or dish on the fl oor under the drain hole.

Do not allow the water to drip continuously into the

container as it might easily overfl ow.

• Remove the drain knob.

• Remove the rubber plug, the water will fl ow in the

container. When this is nearly full, replace the plug to

stop the water fl ow and empty it. Repeat this process

until all water has been removed.

• Replace the rubber plug into the drain hole fi rmly,

the

FULL LED

should not fl ash any longer.

• Replace the drain knob.

Rubber plug Drain knob

9