FEATURES. ATCOM AT-320 IAX2, AT-323

Add to My manuals
45 Pages

advertisement

FEATURES. ATCOM AT-320 IAX2, AT-323 | Manualzz

AT-323 IAX2 Phone User Manual (V1.43)

2. Features

2.1 Hardware

● Main chip—PA1688 50MHz

● Data Memory—16MB SDRAM

● Program Memory—8 MB Flash memory

● Ethernet Jack—1/2 10/100M jacks

2.2 Software

● DHCP support for LAN or Cable modem

● PPPoE support for ADSL or Cable modem

● Set phone by HTTP web browser (IE6.0) or Telnet

● Upgrade by FTP

● Support major G.7XX; GSM 610; iLBC audio Codec

● VAD (Voice Active Detect)

● CNG (Comfort noise generation)

● Dynamic voice jitter buffer

● G.168/165 compliant 16ms echo cancellation

● Tone generation and Local DTMF re-generation according with ITU-T

● E.164 dial plan and customized dial rules

● 100 entries for quick dial

● 80 entries each for missed calls, answered calls and dialed calls

● Adjustable volume for both handset and speaker

● Hotline

● Support adjustable user password and super password

2.3 Standard and Protocol

AT-320 IP Phone supports following standard and protocol:

● IEEE 802.3 /802.3 u 10 Base T / 100Base TX

● Major G.7XX; GSM610 iLBC audio Codec

● IAX2 (Inter-Asterisk-eXchange V2)

● TCP/IP: Internet transfer and control protocol

● RTP: Real-time Transport Protocol

● RTCP Real-time Control Protocol

● VAD/CNG save bandwidth

● DHCP Dynamic Host Configuration Protocol

● PPPoE PPP Protocol over Ethernet

● DNS Domain Name Server

5

Keison Products www.keison.co.uk [email protected] Tel: +44 (0)1245 600560

AT-323 IAX2 Phone User Manual (V1.43)

● Telnet Internet's remote login protocol

● FTP File Transfer protocol

● HTTP Hyper Text Transfer protocol

2.4 Operating requirements

● Operation temperature: 0 to 40° C (32° to 104° F)

● Humidity: 10 to 90% no dew

2.5 Electric requirements

● Power adapter: output DC 12V/450mA

2.6 Size

200 X 195 X 87 mm (L x W x H)

2.7 Installation

1 Connect handset to base: insert handset cord into handset cord jack at the left side of the base.

2 Connect IP phone to Internet: plug the RJ-45 Ethernet cable into the

Ethernet Jack. Plug the other end of the cable into HUB.

3 Power on IP phone: plug the power cord adapter into the Power Jack. Then plug the other end of the power cord adapter into the appropriate wall outlet.

6

Keison Products www.keison.co.uk [email protected] Tel: +44 (0)1245 600560

advertisement

Related manuals

Download PDF

advertisement