advertisement
AT-323 IAX2 Phone User Manual (V1.43)
5. Usage of the phone
5.1 Receiving calls
AT-320 IP phone can receive incoming calls from other AT-320 IP phone and devices that support the IAX2 protocol. It works just like an ordinary phone for incoming calls. When it rings, you can receive the call by following methods:
Use handset: Lift the handset and begin speaking. When the call is over, put the handset back.
Handset to hand free: While receiving call with handset, press
Speake on the keypad and then put down the handset. When the call is over,
, pick up the handset to continue the call. When the call is over, put back the handset.
Note When you communicate with the other party without lifting the handset, please do not exceed 40 CM from speaker.
35
Keison Products www.keison.co.uk [email protected] Tel: +44 (0)1245 600560
AT-323 IAX2 Phone User Manual (V1.43)
5.2 Place a call
● Call another IP phone under the same Gatekeeper:
Cal
1. Handset: Pick up the handset and listen for the Internet dial tone. Then l dial the phone number you wish to call and press or to end the dialing. Once the call connection has been established and the ring tone has sounded, wait for the other party to answer. When the other party answers, you can begin speaking. When the call is over, put back the handset. The dialed number has been saved into the buffer.
Cal input the phone number you wish to call and press or to end l the dialing. Once the call connection has been established and the ring tone has sounded, wait for the other party to answer. When the other again. The dialed number has been saved into the buffer.
3. Blind dialing: Use the keypad to enter the phone number you wish to
Cal call and then press or to make the call. Once the call l connection has been established and the ring tone has sounded, wait for the other party to answer. When the other party answers, you can number has been saved into the buffer.
● Place a call without login the Gatekeeper
36
Keison Products www.keison.co.uk [email protected] Tel: +44 (0)1245 600560
AT-323 IAX2 Phone User Manual (V1.43)
If AT-320 IP phone does not login the Gatekeeper, you can place a call by
Speaker lifting the handset or pressing and then inputting the IP address
Cal of the other party, and then pressing or l
Note When using direct IP call please use “*” replace the “.” In the IP address. For example dial 192*168*1*123 instead 192.168.1.123
37
Keison Products www.keison.co.uk [email protected] Tel: +44 (0)1245 600560
AT-323 IAX2 Phone User Manual (V1.43)
5.3 View Records
● View missed calls
Click then you will hear the record of missed call. Click reservedly. If there is no record, you will hear nothing.
● View received call
Click then you will hear the record of the received call. Click
Vol+ to turn the number orderly; click to turn the numbers reservedly. If there is no record, you will hear nothing.
● View dialed number
Click then you will hear the record of the dialed call. Click reservedly. If there is no record, you will hear nothing.
● When you hear the number you want to dial, please press to place a call directly.
Note AT-320 IP phone supports saving 80 entries unanswered call, dialed call and received call ranged from 1-80 at best. When the entries arrives 80, the latest record will cover the first one. The record will lose when the phone restarts or turned on.
38
Keison Products www.keison.co.uk [email protected] Tel: +44 (0)1245 600560
advertisement