advertisement
4
About the 7193 Printer 7193 Owner’s Guide
Ordering Paper and Supplies
Thermal receipt paper and other supplies can be ordered from several recommended and qualified suppliers.
Ordering Thermal Paper
The 7193 requires “fax grade” thermal paper with the following dimensions:
•
Diameter: 80 mm maximum (3.15 in.)
•
Length: 83 meters (273 ft.)
•
Width: 80 mm ± .5 mm (3.15 ± .008 in.)
The paper must not be attached at the core or the printer will be damaged when the paper runs out. When the paper runs out, the printer stops printing and turns on the Paper Out light (red) on the operator panel. There is no indication or automatic signal when the paper runs low. It is recommended that you use a paper roll with a colored stripe at the end of the roll to indicate that the paper is running low.
Recommended Suppliers
The grades of paper listed here will give the best print quality. When more than one stock or paper grade number is listed, the first number (standard density) provides better image density. You may order paper directly from AT&T Global
Information Solutions. Contact your Axiohm supplier for ordering paper manufactured by Kanzaki (paper grades listed on the next page).
AT&T Global Information Solutions Company
Media Products Division
9995 Washington Church Road
Miamisburg, OH 45342
Voice: 1(800)543-8130 (toll free), or local listing of Media Products sales office
Stock numbers : 878559 (standard density), 856966 (light density)
May 1996
7193 Owner’s Guide About the 7193 Printer
Kanzaki Specialty Papers
In U.S. A.
Imaging Products
Voice: 1(413)736-3216, 1(800)628-8386 (toll free)
Fax: 1(413)731-8864
Paper grade : F380 (standard density), F180 (light density)
In Japan:
New OJI Paper Co., Ltd.
Voice: (03)3563-4763
Fax: (03)3563-1136
Paper grade : KF-740-2EX (standard density), KF-740-1EX (light density)
In Germany:
Kanzan Spezialpapiere GMBH
Voice: 011 49 2421 5924 20
Paper grade: KF-60 (standard density), KF-50 (light density)
Other Qualified Suppliers
The following companies manufacture thermal receipt paper which has been tested with the 7193 and may be used if desired. Contact your Axiohm supplier for further information.
Appleton Papers, Inc.
Voice: 1(414) 734-9841
Paper grade: T1012
Arjo-Wiggins Thermal Papers, Ltd.
Voice: 44 (0) 522 681212
Fax: 44 (0) 522 690972
Paper grade: S552, S662
Nippon Paper Industry Co., Ltd.
Business Communication Paper Division
Voice: (03)3218-8049
Fax: (03)3216-1397
Paper grade: TP50 KS
May 1996 5
advertisement
Related manuals
advertisement
Table of contents
- 9 Models
- 9 Communication Interfaces
- 9 Options
- 9 Features
- 10 Thermal Printhead
- 11 Ordering Paper and Supplies
- 11 Ordering Thermal Paper
- 13 Ordering the Power Supply and Cables
- 13 Ordering the Printer Wall-Mount Kit
- 13 Ordering Cash Drawers
- 14 Cleaning the Printer
- 16 What Is in the Box?
- 16 Removing the Packing Material
- 17 Repacking the Printer
- 18 Choosing a Location
- 19 Setting Switches
- 21 Attaching the Feet
- 22 Connecting Cash Drawer Cables
- 23 Connecting Communication and Power Cables
- 23 RS-232C Models
- 24 Parallel Models
- 25 Turning On the Printer
- 26 Loading and Changing Paper
- 26 When to Change the Paper
- 27 Removing the Paper Roll
- 28 Putting In the Paper Roll
- 29 Advancing Paper
- 28 Testing the Printer
- 30 Mounting the Printer on a Wall
- 32 Mounting the Power Supply on a Wall
- 34 Operator Panel Lights
- 35 Correcting Problems
- 35 Operator-Correctable Conditions
- 35 Service-Related Problems
- 36 Contacting a Service Representative
- 38 Level 0 Diagnostics
- 39 Level 1 Diagnostics
- 40 Setting Data Error and Data Buffer options
- 41 Setting Printhead Resistance
- 42 Setting Default Lines per Inch
- 43 Setting Partial Cut Distance
- 44 Ignoring/Using the Carriage Return
- 45 Running the Data Scope Mode
- 47 Testing Receipt Printing
- 48 Level 2 Diagnostics
- 48 Level 3 Diagnostics
- 50 Communication Overview
- 50 Interfaces
- 50 Sending Commands
- 51 RS-232C Interface
- 52 XON/XOFF Protocol
- 52 DTR/DSR Protocol
- 53 RS-232C Technical Specifications
- 57 Parallel Interface
- 57 Parallel Protocol
- 58 Parallel Technical Specifications