Regional Settings. Xerox 490
Add to My manualsadvertisement
◉
Touch to zoom
![Regional Settings. Xerox 490 | Manualzz Regional Settings. Xerox 490 | Manualzz](http://s1.manualzz.com/store/data/002112658_1-334133b98dfdda4d87bd503b330e5792-360x466.png)
Xerox 490/980 Color Continuous Feed Printing System Color Calibration Process for v1.1.6 Software
Regional Settings
This is to ensure that the ColorPort Utility Software can function properly when measuring targets in the next section.
1.
Select [Start] and [Control Panel].
2.
Select [Regional and Language Options].
3.
Select [Customize].
4.
For the decimal symbol field, ensure that the decimal point [.] is selected, and not the comma [,].
5.
Select [OK], select [OK] again, and close the Control Panel window.
Color Management Guide 5-11
advertisement
Related manuals
advertisement
Table of contents
- 1 Cover Page
- 3 Table of Contents
- 5 Color Management Overview
- 6 CMS Option Tool Overview
- 6 Major Functions of the CMS Option Tool
- 7 CMS Option Tool Setup
- 7 Prerequisites to setting up CMS Option Tool
- 7 Color Options
- 7 Color Resource Set
- 7 Convert CMYK/RGB Black to K
- 8 Black Overprint
- 8 Color Characteristics
- 11 Pre-Printed Paper
- 13 CMS Option Tool
- 13 Introduction to the CMS Option Tool
- 13 Measuring devices
- 14 Install the CMS Option Tool
- 15 CMS Option tool tab menus
- 15 After the installation
- 16 Cancelling the installation
- 16 Uninstall the CMS Option Tool
- 17 Using the CMS Option Tool
- 20 Create Calibration Data
- 22 Custom Paper
- 24 Registering Custom Paper
- 25 Custom Ink Characteristic
- 25 Paper Information
- 28 Color Resource Management
- 29 Prepare for Color Calibration
- 30 Recommended Calibration Conditions
- 31 Verify Color Calibration Resources
- 36 Copy Color Calibration Resources
- 38 Download ColorPort Utility Software
- 39 Check for Queue and Imposition Files
- 39 Check for Existing Imposition Files
- 39 Check for Existing Queues
- 41 Pre-Calibration Engine Density Adjustment
- 42 Create an Empty Color Resource
- 42 For Simplex Systems
- 44 For Duplex Systems
- 46 Set Up Imposition Files
- 46 Import Simplex/Duplex Imposition Files
- 47 Manipulate the Imported Simplex Imposition File
- 48 Manipulate the Imported Duplex Imposition File
- 49 Create a New Queue
- 49 Create a new Simplex Queue
- 53 Create a new Duplex Queue
- 58 Color Density Adjustment
- 61 Color Calibration Process for v1.1.6 Software
- 62 Create a TRC File
- 62 For Simplex Systems
- 66 For Duplex Systems
- 71 Regional Settings
- 72 Use ColorPort to Measure Targets
- 74 Create TRC File with TRC Viewer
- 74 For Simplex Systems
- 76 For Duplex Systems
- 78 Import TRC File into PC-UI
- 78 For Simplex Systems
- 80 For Duplex Systems
- 81 Create a New Queue for Calibration Confirmation
- 82 For Simplex Systems
- 85 For Duplex Systems
- 88 Post-Calibration Density Check
- 90 Apply a Calibration TRC to existing Queues using the User TRC option
- 90 For Simplex Systems
- 90 For Duplex Systems
- 91 Color Calibration Using ColorPort Utility Software
- 92 Color Calibration
- 93 Using ColorPort for Color Calibration
- 95 Appendix A - Logical Page Setting
- 95 Logical Page Setting
- 95 Offset Specification
- 95 Logical Page Size
- 96 Offset Specification and Logical Page Size Explained
- 97 Calculate Offset Specification and Logical Page Size Values
- 98 Table of Offset Specification and Logical Page Size Values
- 99 Appendix B - Print Using LPR
- 99 Print Using LPR
- 102 Copyright Page